Tunable phosphinite, phosphite and phosphoramidite ligands for the asymmetric hydrovinylation reactions

Only a limited number of ligands have been successfully employed for the Ni-catalyzed asymmetric hydrovinylation reaction. Diarylphosphinites, carrying β-acylamino groups prepared from readily available carbohydrates, in conjunction with highly dissociated counteranions {[(3,5-(CF₃)₂C₆H₃]₄B⁻ or SbF₆⁻}, effect the hydrovinylation of vinylarenes under ambient pressure of ethylene with high enantioselectivity. Nitrogen substituents such as -COCF₃ and COPh groups lead to isomerization of the primary products (3-arylbutenes) to Z- and E-2-aryl-2-butenes. In a prototypical synthesis of a 2-arylproionic acid, (S)-3-(4-bromophenyl)-1-butene (89% ee) has be transformed into (R)-ibuprofen by Ni-catalyzed cross-coupling with i-BuMgBr, followed by oxidation of the double bond with NaIO₄ and KMnO₄. Asymmetric codimerization of norbonene and ethylene using binaphthol-derived phosphoramidites as ligands gives 1:1, 2:1 or polymeric adducts depending on the relative configurations and nature of the BINAP and amine moieties. With one of the phosphoramidite-Ni complexes, counteranions BAr₄⁻ [Ar=3,5-(CF₃)₂C₆H₃] and SbF₆⁻, which had been used interchangeably in other reactions, give either a 1:1 adduct or a 2:1 adduct, respectively.     

Heterodimerization of olefins. 1. Hydrovinylation reactions of olefins that are amenable to asymmetric catalysis

Through a systematic examination of ligand and counterion effects, new protocols for a nearly quantitative and highly selective codimerization of ethylene and various functionalized vinylarenes have been discovered. In a typical reaction, 4-bromostyrene and ethylene undergo codimerization in the presence of 0.0035 equiv each of [(allyl)NiBr]2, triphenylphosphine, and AgOTf in CH2Cl2 at -56 degrees C to give 3-(4-bromophenyl)-1-butene in >98% yield and selectivity. Corresponding reactions with [(allyl)PdX]2 are much less efficient and less selective and may require further optimization before a viable system can be identified. Another useful protocol that gives comparable yield and selectivity involves the use of a single-component catalyst prepared from allyl 2-diphenylphosphinobenzoate, Ni(COD)2, and (C6F5)3B. Recognition of a synergistic relationship between a chiral hemilabile ligand (for example, (R)-2-methoxy-2'-diphenylphosphino-1,1'-binaphthyl, MOP) and a highly dissociated counteranion (BARF or SbF6) in an enantioselective version of the Ni-catalyzed reaction raises the prospects of developing a practical route for the synthesis of 3-arylbutenes. Several pharmaceutically relevant compounds, including widely used 2-arylpropionic acids, can be synthesized from these key intermediates. This reaction appears to be quite general. Synthesis of several new 2-diphenylphosphino-1,1-binaphthyl derivatives, prepared to probe the effect of hemilabile coordination on the efficiency and selectivity of the reaction, are also described.     

Hydrovinylation of norbornene. Ligand-dependent selectivity and asymmetric variations

[reaction: see text] Norbornene undergoes Ni-catalyzed (1-2 mol% allylnickel bromide/phosphine/NaBARF or AgSbF(6), 1 bar ethylene, -50 degrees C) hydrovinylation (>97% yield), giving either a 1:1 or a 2:1 (norbornene/ethylene) adduct depending on the size of the phosphine. Use of binaphthol-derived phosphoramidite ligand results in up to 80% ee for the 1:1 adduct. The course of the reaction is highly dependent on the ligand (size and configuration of the appendages) and the counteranion present.     

All-carbon quaternary centers via catalytic asymmetric hydrovinylation. New approaches to the exocyclic side chain stereochemistry problem

1-Alkylstyrenes undergo efficient hydrovinylation (coupling with ethylene) in the presence of 1 mol % of a Ni catalyst prepared from [(allyl)NiBr]2, Na+BAr4- (Ar = 3,5-bistrifluoromethylphenyl), and phosphoramidite ligands (derived from enantiopure binaphthols and 1-methylbenzylamines), giving hydrovinylation products in excellent yields and enantioselectivities. The products contain a quaternary center with two versatile latent functionalities, an arene and a vinyl group, useful for further synthetic elaborations.     

Phosphino carboxylic acid ester functionalized carbosilane dendrimers: nanoscale ligands for the Pd-catalyzed hydrovinylation reaction in a membrane reactor

Phosphino carboxylic acid ester terminated G(0) compounds Si(CH(2))(3)SiMe(2)(C(6)H(4)CH(2)OC(O)(CH(2))(n)()CH(2)PPh(2)(4) (9a and 9b; n = 1, 2) and the carbosilane dendrimers Si(CH(2))(3)Si((CH(2))(3)SiMe(2)(C(6)H(4)CH(2)OC(O)(CH(2))(n)()CH(2) PPh(2))(3)(4) (10a and 10b; n = 1, 2) have been prepared as hemilabile nanoscale ligands for the palladium-catalyzed codimerization of olefins. The hydrovinylation of styrene was carried out in a continuously operated nanofiltration membrane reactor. Under continuous conditions, the selectivity of the reaction is increased considerably. Monomeric model complexes and the dendritic catalysts were compared for their activity and selectivity in batch reactions. The Pd catalyst complexes were prepared in situ from the dendritic ligands and an (allyl)palladium(II) precursor.     

Fine-tuning monophosphine ligands for enhanced enantioselectivity. Influence of chiral hemilabile pendant groups

[reaction: see text] C(2)-Symmetric P-(2-X-aryl)-2,5-dialkylphospholanes (X = dioxolan-2-yl or dioxan-2-yl), designed on the basis of a working model for asymmetric induction, are effective ligands for the Ni(II)-catalyzed asymmetric hydrovinylation of styrenes. Excellent yields (>99%), selectivities for the desired 3-arylbutenes (>99%), high S/C ratios (>1200), and ee's (up to 91%) have been realized for a number of prototypical vinylarenes. In the dioxolane series, the selectivity depends on the configuration of the C(4) and C(5)() carbons.     

对(二苯基膦)苯乙烯单体合成方法的改进

以对溴苯乙烯为原料,先将其制备成格氏试剂,再与二苯基氯化膦反应,合成对(二苯基膦)苯乙烯单体.通过向反应体系中添加自由基捕捉剂,改进了对(二苯基膦)苯乙烯单体的合成方法.研究结果表明,当使用物质的量分数是0.2%的对苯二酚为阻聚剂时,对(二苯基膦)苯乙烯单体的收率可提高到78%.     

Yttrium-catalyzed cis-1,4-Selective Polymerization of 2-(4-Halophenyl)-1,3-butadienes and Their Copolymerization with Isoprene

Polymerization of 2-(4-halophenyl)-1,3-butadiene(2-XPB) and their copolymerization with isoprene using a yttrium catalyst have been examined. The β-diketiminato yttrium bis(alkyl) complex(1) activated by [Ph_3 C][B(C₆ F₅)₄] and Ali Bu3 shows high cis-1,4-selectivity(>98%) for the polymerization of 2-XPB(2-XPB = 2-FPB, 2-Cl PB and 2-Br PB) to afford halogenated plastic poly(dienes) with glass transition temperatures of30–55 ℃. Moreover, the copolymerization of 2-XPB with isoprene(IP) has also been achieved by this catalyst, and the insertion ratios of 2-XPB can be facilely tuned in a full range of 0%–100% simply by changing the 2-XPB-to-IP ratio. Quantitative hydrogenation of cis-1,4-poly(2-XPB) results in perfect alternating ethylene-halostyrene copolymers, and an alternating copolymer of 4-vinylbenzoic acid with ethylene is obtained by a consecutive reaction of ethylene-4-bromostyrene copolymer with ⁿBu Li, CO₂ and HCl.     

Synthesis of poly(tert-butoxycarbonyl-p-phenylene): precursor to poly(p-phenylene)

Poly[2-(tert-butoxycarbonyl)-1,4-phenylene] ( 2 ) was prepared by the Ni-catalyzed polymerization of tert-butyl 2,5-dichlorobenzoate ( 1 ). The microstructure of polymer 2 was probably alternating head-to-head and tail-to-tail. This polymer was soluble in dipolar aprotic solvents, chloroform, tetrahydrofuran, and dichloromethane. Polymer 2 was saponified easily by thermal or acid treatment to yield poly[2-carboxy-1,4-phenylene] ( 3 ). Decarboxylation of polymer 3 in quinoline in the presence of copper(II) oxide produced poly(p-phenylene) (PPP) ( 4 ).     

Palladium-catalyzed cross-coupling reactions of amines with alkenyl bromides: a new method for the synthesis of enamines and imines

The palladium-catalyzed cross-coupling reaction of alkenyl bromides with secondary and primary amines gives rise to enamines and imines, respectively. This new transformation expands the applicability of palladium-catalyzed C-N bond forming reactions (the Buchwald-Hartwig amination), which have mostly been applied to aryl halides. After screening of different ligands, bases, and solvents, the catalytic combination [Pd(2)(dba)(3)]/BINAP in the presence of NaOtBu in toluene gave the best results in the cross-coupling of secondary amines with 1-bromostyrene (dba=dibenzylideneacetone, BINAP=2,2'-bis(diphenylphosphino)-1,1'-binaphthyl). The corresponding enamines are obtained cleanly and in nearly quantitative yields. However, steric hindrance seems to be a limitation of the reaction, as amines carrying large substituents are not well converted. The same methodology can be applied to the coupling of secondary amines with 2-bromostyrene. Moreover, the reaction with substituted 2-bromopropenes allows regioselective synthesis of isomerizable terminal enamines without isomerization of the double bond. The best catalytic conditions for the cross-coupling of 1-bromostyrene with primary amines include again the use of the Pd(0)/BINAP/NaOtBu system. The reaction gives rise to the expected imines in very short times and with low catalyst loadings. A set of structurally diverse imines can be prepared by this methodology through variations in the structure of both coupling partners. However, 2-bromostyrene failed to give good results in this coupling reaction, probably due to product inhibition of the catalytic cycle. Competition experiments of vinyl versus aryl amination reveal that the reaction occurs preferentially on vinyl bromides.     

Synthesis,resolution, and reactivity of benzylmesitylphenylphosphine: a new p-chiral bulky ligand

The synthesis of P,P'-dimesityl-P,P'-diphenyldiphosphine and benzylmesitylphenylphosphine is described as well as the resolution of the latter ligand by means of homochiral organometallic complexes. The absolute configuration of the phosphine is assigned by NMR spectra, using the homochiral palladacycle as a reference point. The configuration has been confirmed by single crystal X-ray diffraction. Molecular mechanics calculations were performed in [PdCl-(R)-(+)-C10H6CH(Me)NH2(PBnMesPh)], and showed that the rotation around the Pd-P bond is restricted in this complex. [Pd(eta3-2-MeC3H4)Cl(PBnMesPh)] was obtained and used as a precursor in the catalytic hydrovinylation of styrene. Benzylmesitylphenylphosphine has a strong tendency to form phosphapalladacycles by activation of one of the ortho-methyl groups. The formation of this metallacycle from cyclopalladated N-donor derivatives by a ligand-exchange reaction is also described.     

The effect of molecular weight on the topography of thin films of blends of poly(4-bromostyrene) and polystyrene

Blends of polystyrene and poly(4-bromostyrene) phase-separate during spin-casting onto silicon wafers to give a thin film with islands of poly(4-bromostyrene) in a sea of polystyrene. Variation of the molecular weights of the blend components shows that the poly- (4-bromostyrene) and polystyrene influence the film structure in different ways. For poly(4-bromostyrene) of a given molecular weight, the ratio of the observed feature height to the overall film thickness remained constant as the film thickness increased. Moreover, the mean height of the topographical features was independent of the polystyrene but decreased with the molecular weight of the brominated polymer. It is concluded that the substrate–poly(4-bromostyrene) interaction dominates the formation of topography and consequently, though the islands are poly(4-bromostyrene), the mean height of the topographical features is greater the lower the molecular weight of the brominated polymer. The polystyrene has a secondary role, altering the thermodynamics or viscosity of the blend, thereby controlling the number of islands formed: the higher the molecular weight of the polystyrene the greater the number of islands. Received: 2 December 1999 Accepted: 7 April 2000     

配盐[(μ-PhSe)(μ-CO)Fe~2(CO)~6][Et~3NH]的亲电反应研究: (μ-苯硒)(μ-酰基)及(μ-苯硒)(μ-烯基)六羰基二铁配合物的合成及结构

本文研究由Fe~3(CO)~1~2, PhSeH, Et~3N所形成的配盐[(μ-PhSe)(μ-CO)Fe~2(CO)~6][Et~3NH]与对甲氧基苯甲酰氯、乙酰氯、丙酰氯、苯乙酰氯、α-甲基丙烯酰氯、巴豆酰氯、肉桂酰氯、苯乙炔和β-溴代苯乙烯的反应和机理, 合成了八个既含μ-苯硒又含μ-酰基或μ-烯基配体的六羰基二铁配合物。除用元素分析、MS、IR、^1H NMR表征它们的结构外, 尚测得(μ-PhSe)(μ-σ,π-PhCH=CH)Fe~2(CO)~6的单晶结构。该分子单晶的空间群为P2~1/c, 晶胞参数a=0.9236(2), b=1.0966(3), c=2.0348(6)nm,β=101.53(1)°, D~x=1.77g/cm^3, Z=4, R=0.054, R~w=0.061。     

Asymmetric hydrovinylation of vinylindoles. A facile route to cyclopenta[g]indole natural products (+)-cis-trikentrin A and (+)-cis-trikentrin B

Vinylindoles undergo Ni(II)-catalyzed asymmetric hydrovinylation under very mild conditions (-78 °C, 1 atm ethylene, 4 mol % catalyst) to give the corresponding 2-but-3-enyl derivatives in excellent yields and enantioselectivities. Hydroboration of the alkene and oxidation to an acid, followed by Friedel-Crafts annulation, gives an indole-annulated cyclopentanone that is a suitable precursor for the syntheses of cis-trikentrins and all known herbindoles. For example, the cyclopentanone from 4-ethyl-7-vinylindole is converted into (+)-cis-trikentin A in four steps (Wittig reaction, alkene isomerization, diastereoselective hydrogenation, and nitrogen deprotection). The previous synthesis of this molecule from (S)-(-)-malic acid involved more than 20 steps and a preparative HPLC separation of diastereomeric intermediates.     

Ruthenium-catalyzed hydrovinylation of N-acetylenamines leading to amines with a quaternary carbon center

A catalytic hydrovinylation of N-acetylenamines with ethylene is reported. This new hydrovinylation reaction is catalyzed by a ruthenium hydride complex, RuHCl(CO)(PCy(3))(2), providing a series of N-acetylamines with a quaternary carbon center with up to 99% yield.     

Furanoside phosphite-phosphoroamidite: new ligand class for the asymmetric nickel-catalyzed trialkylaluminium addition to aldehydes

We have described the first successful application of bidentate ligands in the asymmetric Ni-catalyzed trialkylaluminium addition to several aldehydes. The ligands are prepared from inexpensive d-(+)-xylose and d-(+)-glucose and have the advantage of carbohydrate and phosphite/phosphoroamidite moieties. After systematic variation of the position of the phosphoroamidite group at either C5 or C-3, the configuration of C-3 and the substituents in the biaryl phosphite/phosphoroamidite moieties, enantioselectivities up to 84% and high yields were obtained in the Ni-catalyzed trialkylaluminium addition to several aldehydes.     

Conductive polymer brushes of regioregular head-to-tail poly(3-alkylthiophenes) via catalyst-transfer surface-initiated polycondensation

We describe a new method to grow conductive polymer (CP) brushes of regioregular head-to-tail poly(3-alkylthiophenes) (P3AT) via surface-initiated polycondensation of 2-bromo-5-chloromagnesio-3-alkylthiophene. A simple procedure for the preparation of the Ni(II) macroinitiator by the reaction of Ni(PPh3)4 with photocross-linked poly-4-bromostyrene films was developed. Exposure of the initiator layers to the monomer solution leads to selective chain growth polycondensation of the monomer from the surface, resulting in P3AT brushes in a very economical way. In contrast to the P3AT films prepared by traditional solvent casting methods, our approach leads to mechanically robust CP films, stable against delamination. We believe that our approach will be helpful in the fabrication of all-plastic devices.     

Synthesis of 7,7'-dihydroxy-8,8'-biquinolyl (azaBINOL) via Pd-catalyzed directed double C-H functionalization of 8,8'-biquinolyl: emergence of an atropos from a tropos state

7,7'-Dihydroxy-8,8'-biquinolyl (azaBINOL) was prepared from 2-chloroaniline in four steps: (1) the Skraup reaction, (2) Ni-catalyzed reductive coupling of 8-chloroquinoline, (3) Pd(II)-catalyzed double C-H functionalization of 8,8'-biquinolyl mediated by PhI(OAc)(2), and (4) saponification. During the third step, an axially chiral (atropos type) biaryl molecule was directly generated from an essentially achiral (tropos type) biaryl starting material.     

An improved and general synthesis of monomers for incorporating trityl linker groups into polystyrene synthesis supports

A straightforward synthesis of trityl alcohols in which one of the aryl rings is substituted with a vinyl group is presented. The synthesis of the alcohols involves the direct addition of the Grignard reagent prepared from 4-bromostyrene to substituted benzophenones. These compounds are used to incorporate trityl linker groups into polystyrene-based organic synthesis supports. Both non-cross-linked and cross-linked (JandaJel™) polystyrene have been prepared using these monomers.     

Rapid ketone transfer hydrogenation by employing simple, in situ prepared iridium(I) precatalysts supported by "non-N--H" P,N ligands

The catalytic utility in ketone transfer hydrogenation (TH) of the preformed complexes [Ir(cod)(kappa(2)-2-NMe(2)-3-PiPr(2)-indene)](+)X(-) ([2 a](+)X(-); X: PF(6), BF(4), and OTf; cod: eta(4)-1,5-cyclooctadiene; OTf: trifluoromethanesulfonate), [Ir(cod)(kappa(2)-1-PiPr(2)-2-NMe(2)-indene)](+)OTf(-) ([2 b](+)OTf(-)), [Ir(cod)(kappa(2)-2-NMe(2)-3-PiPr(2)-indenide)] (3), and [Ir(cod)(kappa(2)-o-tBu(2)P-C(6)H(4)-NMe(2))](+)PF(6) (-) ([4](+)PF(6) (-)), as well as of related mixtures prepared from [{IrCl(cod)}(2)] and various P,N-substituted indene or phenylene ligands, was examined. Whereas [2 a](+)X(-), [2 b](+)OTf(-), 3, and related in situ prepared Ir catalysts derived from P,N-indenes proved to be generally effective in mediating the reduction of acetophenone to 1-phenylethanol in basic iPrOH at reflux (0.1 mol % Ir; 81-99 % conversion) in a preliminary catalytic survey, the structurally related Ir catalysts prepared from (o-R(2)P-C(6)H(4))NMe(2) (R: Ph, iPr, or tBu) were observed to outperform the corresponding P,N-indene ligands under similar conditions. In the course of such studies, it was observed that alteration of the substituents at the donor fragments of the supporting P,N ligand had a pronounced influence on the catalytic performance of the derived catalysts, with ligands featuring bulky dialkylphosphino donors proving to be the most effective. Notably, the crystallographically characterized complex [4](+)PF(6) (-), either preformed or prepared in situ from a mixture of [{IrCl(cod)}(2)], NaPF(6), and (o-tBu(2)P-C(6)H(4))NMe(2), proved to be highly effective in mediating the catalytic transfer hydrogenation (TH) of ketones in basic iPrOH, with near quantitative conversions for a range of alkyl and/or aryl ketones and with very high turnover-frequency values (up to 230 000 h(-1) at >50 % conversion); this thereby enabled the use of Ir loadings ranging from 0.1 to 0.004 mol %. Catalyst mixtures prepared from [{IrCl(cod)}(2)], NaPF(6), and the chiral (alphaS,alphaS)-1,1'-bis[alpha-(dimethylamino)benzyl]-(R,R)-2,2'-bis(dicyclohexylphosphino)ferrocene (Cy-Mandyphos) ligand proved capable of mediating the asymmetric TH of aryl alkyl ketones, including that of the hindered substrate 2,2-dimethylpropiophenone with an efficiency (0.5 mol % Ir; 95 % conversion, 95 % ee) not documented previously in TH chemistry.