水合石榴石Sr3Fe2（OH）12的温和水热合成与Moessbauer谱 …

在温和水热体系中合成出单相水合石榴石Ｓｒ３Ｆｅ２（ＯＨ）１２，产物在５７３Ｋ左右经历快速的与Ｓｒ最近邻的ＯＨ断裂与分解过程，在空气或氧气中焙烧出现从Ｆｅ（Ⅲ）到Ｆｅ（Ⅳ）的氧化，骨架Ｆｅ离子价态变化直接决定分解过程的及产物的结构类型，采用Ｍｏｅｓｓｂａｕｅｒ谱联用ＸＰＳ法测出Ｓｒ－Ｆｅ水合石榴石晶格中存在２种八面体Ｆｅ（ＯＨ）６。     

Skeleton Vibrations and Force Constants of ［Fe_2Cr（μ_3－O）（glycine）_6（H_2O）_3］（NO_3）_7．3H_2O

ＳｋｅｌｅｔｏｎＶｉｂｒａｔｉｏｎｓａｎｄＦｏｒｃｅＣｏｎｓｔａｎｔｓｏｆ［Ｆｅ_２Ｃｒ（μ_３－Ｏ）（ｇｌｙｃｉｎｅ）_６（Ｈ_２Ｏ）_３］（ＮＯ_３）_７．３Ｈ_２ＯＺｈａｎｇＬｉｎ－Ｎａ，ＬｉｎＺｈｅｎｇ－Ｙａｎ（ＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙｏ...     

Syntheses，Structures and Properties of Some New Composition Perovskite Compounds：Sr_（0．6）Bi_（0．4）FeO_（2．7），Sr_（1－x）Bi_xFeO_（3－y） and Ba_（1．5）Pt_（0．5）Mn_2O_6

Ｓｙｎｔｈｅｓｅｓ，ＳｔｒｕｃｔｕｒｅｓａｎｄＰｒｏｐｅｒｔｉｅｓｏｆＳｏｍｅ　ＮｅｗＣｏｍｐｏｓｉｔｉｏｎＰｅｒｏｖｓｋｉｔｅＣｏｍｐｏｕｎｄｓ：Ｓｒ_（０．６）Ｂｉ_（０．４）ＦｅＯ_（２．７），Ｓｒ_（１－ｘ）Ｂｉ_ｘＦｅＯ_（３－ｙ）　ａｎｄ　Ｂａ...     

非水体系中FeZSM-48的合成与表征(英文)

本文首次在非水体系Ｎａ２ＯＳｉＯ２Ｎ２Ｏ３Ｆｅ２Ｏ３Ｈ２Ｎ（ＣＨ２）６ＮＨ２Ｃ２Ｈ５）３Ｎ中合成了ＦｅＺｓＭ４８杂原子分子筛。Ｘ衍射和扫描电镜测试表明产物具有ＺＳＭ４８沸石结构。红外光谱和热重差热分析结果表明Ｆｅ（ＩＩ）进入了分子筛骨架，ＥＳＲ光谱中较强的信号ｇ＝４．３有力地证明了分子筛骨架中存在四面体配位的Ｆｅ（ＩＩ）离子。通过对碱度影响的考察发现反应混合物中适当的碱度有利于产物的生成。产物表面富铁富铝。     

（四甲基二硅撑）双（3—三甲硅基环戊二烯基）—四羰基二铁…

标题化合物（Ｍｅ２ＳｉＳｉＭｅ２）〔η＾５－（３－Ｍｅ３ＳｉＣ５Ｈ３）Ｆｅ（ＣＯ）２〕２／（μ－ＣＯ）２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ２Ｃｌ、ＣｌＣＨ２ＣＯＯＣ２Ｈ５和Ｐｈ３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ２ＳｉＳｉＭｅ２）〔η＾５－（３－Ｍｅ３ＳｉＣ５Ｈ３）Ｆｅ（ＣＯ）２Ｒ〕２（Ｒ：Ｍ     

（四甲基二硅撑）双（3－三甲硅基环戊二烯基）－四羰基二铁的反应性

标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２／（μ－ＣＯ）_２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ_２Ｃｌ、ＣｌＣＨ_２ＣＯＯＣ_２Ｈ_５和Ｐｈ_３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２Ｒ］_２（Ｒ：ＭｅＣＯ（１），ＰｈＣＯ（２），ＰｈＣＨ_２（３），ＣＨ_２ＣＯＯＣ_２Ｈ_５（４），Ｐｈ_３Ｓｎ（５），Ｉ（６））。Ａ在氯仿中与碘反应，得到Ｆｅ－Ｆｅ断裂的双铁碘化物，但在苯中与过量碘反应，则得到Ｆｅ－Ｉ－Ｆｅ桥联的离子型化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２Ｉ·Ｉ（７）。化合物６的晶体和分子结构经Ｘ射线衍射测定，６属单斜晶系，Ｐ２１／ｃ空间群，ａ＝１．７２１７（４）ｎｍ，ｂ＝０．７７５３（２）ｎｍ，Ｃ＝１．３６２９（７）ｎｍ，β＝１０３．８０（３）°，Ｖ＝１．７６７（２）ｎｍ３，Ｚ＝４，Ｄｃ＝１．６２９９·ｃｍ－１，最终偏差因子Ｒ＝０．０５４。     

（四甲基二硅撑）二（3－三甲硅基环戊二烯基）四羰基二铁及其相关化合物的合成及结构

１，２－二（三甲硅基环戊二烯基）四甲基二硅烷与Ｆｅ（ＣＯ）_５在二甲苯中于１０５～１１０℃反应除分离到少量标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（５）外，主要是生成了脱Ｍｅ_３Ｓｉ基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（１）及１的热重排异构体［Ｍｅ_２ＳｉＣ５Ｈ４－Ｆｅ（ＣＯ）_２］_２（２）．将５的二甲苯溶液加热回流１８ｈ，则转化为其异构体［Ｍｅ_２Ｓｉ（Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２（６）．脱硅基发生在由相应反应物制备５的过程中。且脱硅基是与反应物中（Ｍｅ_２ＳｉＳｉＭｅ_２）桥的存在有关．５的晶体结构经Ｘ射线衍射测定属单斜晶系，Ｐ２_１／ｍ空间群，晶体学数据：ａ＝０．６７８０（１）ｎｍ，ｂ＝２．２３０３（９）ｎｍ，ｃ＝０．９９８８（１）ｎｎ，；β＝９８．９６（１）°，Ｖ＝１．４９６０ｎｍ~３．Ｚ＝２，Ｄ_ｃ＝１．３６ｇ／ｃｍ~３．     

铁基高温变换催化剂制备的穆斯堡尔谱研究──I．铁氧化物前驱态的相变过程

用穆斯堡尔诺及ＸＲＤ技术对不同铁氧化物前驱态的相变过程进行了研究．ＦｅＣＯ３沉淀在空气中老化时被氧化分解生成ＦｅＯ（ＯＨ），经干燥、煅烧后全部转化为α－Ｆｅ２Ｏ３Ｆｅ（ＯＨ）２沉淀物在空气中老化时则转化为ＦｅａＯ４·２Ｈ２Ｏ和ＦｅＯＯＨ，并且两者的相对含量受Ｆｅ２＋的迁移速度和Ｆｅ（ＯＨ）２的氧化速度的影响．干燥、煅烧后，Ｆｅ３Ｏ４·２Ｈ２Ｏ转化生成γ－Ｆｅ２Ｏ３，ＦｅＯＯＨ则转化生成α－Ｆｅ２Ｏ３，由此所得铁氧化物的晶型是可以调节的．     

蝶状铁硒簇合物双（μ—p—甲苯硒基）六羰基二铁双膦取代…

测得并解析了２个蝶状铁硒取代衍生物（μ－ｐ－ＭｅＣ６Ｈ４Ｓｅ）２Ｆｅ２（ＣＯ）２（Ｐｈ２ＰＣＨ２ＣＨ２ＰＰｈ２）（Ａ）和（μ－ｐ－ＭｅＣ６Ｈ４Ｓｅ）２Ｆｅ２（ＣＯ）４（ｃｉｓ－Ｐｈ２ＰＣＨ＝ＣＨＰＰＨ２）（Ｂ）的＾１Ｈ－＾１ＨＣＯＳＹ谱和＾１Ｈ－＾１５ＣＣＯＳＹ谱以及Ａ的＾１Ｈ－＾１ＨＮＯＥＳＲ谱，从而进一不确证了它们的结构。     

FeCo2(CO)7(μ3-S)(O[P(SCH2)2]2)的合成与晶体结构

许多化学工作者对单齿膦配体（ＰＰｈ３,ＰＢｕｎ３,ＰＥｔ２Ｐｈ,Ｐ（ＯＥｔ）３,Ｐ（ＯＣ６Ｈ５）３）与母体簇合物ＦｅＣｏ２（ＣＯ）９（μ３－Ｓ）的取代反应进行过详细研究［１－３］,但对双齿膦配体与母体簇合物的取代反应研究报导较少．Ａｉｍｅ［４］合成了含双齿膦配体的簇合物ＦｅＣｏ２（ＣＯ）７（μ３－Ｓ）（Ｐｈ２ＰＣＨ２ＰＰｈ２）,并用１３ＣＮＭＲ和ＩＲ光谱方法对其结构进行了表征．到目前为止,含双齿膦配体的该类簇合物的晶体与分子结构还未见报导．ＲｏｓａｎｎａＲｏｓｓｅｔｔｉ［２］通过研究母体簇合物与…     

OH(3) (-) and O(2)H(5) (-) double Rydberg anions: predictions and comparisons with NH(4) (-) and N(2)H(7) (-)

A low barrier in the reaction pathway between the double Rydberg isomer of OH(3) (-) and a hydride-water complex indicates that the former species is more difficult to isolate and characterize through anion photoelectron spectroscopy than the well known double Rydberg anion (DRA), tetrahedral NH(4) (-). Electron propagator calculations of vertical electron detachment energies (VEDEs) and isosurface plots of the electron localization function disclose that the transition state's electronic structure more closely resembles that of the DRA than that of the hydride-water complex. Possible stabilization of the OH(3) (-) DRA through hydrogen bonding or ion-dipole interactions is examined through calculations on O(2)H(5) (-) species. Three O(2)H(5) (-) minima with H(-)(H(2)O)(2), hydrogen-bridged, and DRA-molecule structures resemble previously discovered N(2)H(7) (-) species and have well separated VEDEs that may be observable in anion photoelectron spectra.     

Mixed ligand titanium(IV) complexes. Chlorobis(dithiocarbamato)bis(methylsalicylato)titanium(IV) andbis(dithiocarbamato)bis(methylsalicylato)titanium(IV)

Summary Dichlorobis(methylsalicylato)titanium(IV) reacts with potassium or amine salts of dialkyl or diaryl dithiocarbamates in 11 and 12 molar ratios in anhydrous benzene (room temperature) or in boiling CH₂Cl₂ to yield mixed ligand complexes: (AcOC₆H₄O)₂ Ti(S₂CNR₂)Cl (1) and (AcOC₆H₄O)₂ Ti(S₂CNR₂)₂ (2), R=Et, n-Pr, n-Bu, cyclo-C₄H₈ and cyclo-C₅H₁₀. These compounds are moisture sensitive and highly soluble in polar solvents. Molecular weight measurement in conjunction with i.r.,¹H and¹³C n.m.r. spectral studies suggest coordination number 7 and 8 around titanium(IV) in (1) and (2) respectively.     

Bis(trifluoroacetyl) peroxide, CF(3)C(O)OOC(O)CF(3)

Pure, highly explosive CF(3)C(O)OOC(O)CF(3) is prepared for the first time by low-temperature reaction between CF(3)C(O)Cl and Na(2)O(2). At room temperature CF(3)C(O)OOC(O)CF(3) is stable for days in the liquid or gaseous state. The melting point is -37.5 degrees C, and the boiling point is extrapolated to 44 degrees C from the vapor pressure curve log p = -1875/T + 8.92 (p/mbar, T/K). Above room temperature the first-order unimolecular decay into C(2)F(6) + CO(2) occurs with an activation energy of 129 kJ mol(-1). CF(3)C(O)OOC(O)CF(3) is a clean source for CF(3) radicals as demonstrated by matrix-isolation experiments. The pure compound is characterized by NMR, vibrational, and UV spectroscopy. The geometric structure is determined by gas electron diffraction and quantum chemical calculations (HF, B3PW91, B3LYP, and MP2 with 6-31G basis sets). The molecule possesses syn-syn conformation (both C=O bonds synperiplanar to the O-O bond) with O-O = 1.426(10) A and dihedral angle phi(C-O-O-C) = 86.5(32) degrees. The density functional calculations reproduce the experimental structure very well.