Mechanism of [M + H]<Superscript>+</Superscript> formation in photoionization mass spectrometry

In this paper we examine the mechanism of [M + H]+ (henceforth MH+) formation by direct photoionization. Based on comparisons of the relative abundance of M+ and MH+ ions for photoionization of a variety of compounds M as vapor in air versus in different solvents, we conclude that the mechanism is M + hnu --> M+ + e- followed by the reaction M+ + S --> MH+ + S(-H). The principal evidence for molecular radical ion formation M+ followed by hydrogen atom abstraction from protic solvent S are: (1) Nearly exclusive formation of M+ for headspace ionization of M in air, (2) significant relative abundance of MH+ in the presence of protic solvents (e.g., CH3OH, H2O, c-hexane), but not in aprotic solvents (e.g., CCl4-), (3) observation of induced equilibrium oscillations in the abundance of MH+ and M+, and (4) correlation of the ratio of MH+/M+ to reaction length in the photoionization source. Thermodynamic models are advanced that explain the qualitative dependence of the MH+/M+ equilibrium ratio on the properties of solvent S and analyte M. Though the hydrogen abstraction reaction is endothermic in most cases, it is shown that the equilibrium constant is still expected to be much greater than unity in most of the cases studied due to the very slow reverse reaction involving the very low abundant MH+ and S(-H) species.     

Quantum chemical analysis of possible fragmentation of [M + H]<Superscript>+</Superscript> and [M + Na]<Superscript>+</Superscript> complexes of monosubstituted methane,cyclohexane, and benzene derivatives in mass spectrometric studies

The formation and fragmentation energies of the proton and sodium cation complexes with monosubstituted methane, cyclohexane, and benzene derivatives in which carbon atoms are bonded to substituents (NH₂, OH, F, Cl, Br, ONO₂, NO₂, COOH, CN, and Ph) were calculated by the B3LYP/6-31G(d) method. For [M + Na]⁺ complexes, the formation energies are much lower (and differ from one another to a much lesser extent), while the dissociation energies are much higher, than the corresponding energies of the [M + H]⁺ complexes. Na⁺ cation shows a lower selectivity toward localization at functional groups in molecules compared to H⁺. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 246–249, February, 2008.     

Energetic ion bombardment of Ag surfaces by C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> and Ga<Superscript>+</Superscript> projectiles

The ion bombardment-induced release of particles from a metal surface is investigated using energetic fullerene cluster ions as projectiles. The total sputter yield as well as partial yields of neutral and charged monomers and clusters leaving the surface are measured and compared with corresponding data obtained with atomic projectile ions of similar impact kinetic energy. It is found that all yields are enhanced by about one order of magnitude under bombardment with the C60+ cluster projectiles compared with Ga+ ions. In contrast, the electronic excitation processes determining the secondary ion formation probability are unaffected. The kinetic energy spectra of sputtered particles exhibit characteristic differences which reflect the largely different nature of the sputtering process for both types of projectiles. In particular, it is found that under C60+ impact (1) the energy spectrum of sputtered atoms peaks at significantly lower kinetic energies than for Ga+ bombardment and (2) the velocity spectra of monomers and dimers are virtually identical, a finding which is in pronounced contrast to all published data obtained for atomic projectiles. The experimental findings are in reasonable agreement with recent molecular dynamics simulations.     

Kinetic aspects of the ion-exchange reactions of Cs<Superscript>+</Superscript>, Na<Superscript>+</Superscript>, Sr<Superscript>2+</Superscript>and Eu<Superscript>2+</Superscript> ions on the H<Superscript>+</Superscript> form of chromium hexacyanoferrate(II)

Summary This paper reports the radiochemical study of the ion-exchange of Cs⁺, Na⁺, Sr²⁺ and Eu³⁺ ions with H⁺ by chromium hexacyanoferrate(II) which was prepared in a granular form using a gel method. The slow steps which determine the rate of exchange of these ions are directly proportional to the particle diameter and this is confirmed from the linearity test of Bt vs. t plots at different particle diameters. Boyed’s equation and Reichenberg’s tables were used for evaluating all the kinetic parameters. The results reveal that the effective particle radii are unchanged for both chromium hexacyanoferrate(II) dried at 60 and 120 °C. The obtained data were analyzed using McKay plots and Arrhenius equation and the kinetic and thermodynamic parameters, e.g., effective diffusion coefficient, activation energies and entropies of activation have been evaluated. The mobility of these ions inside the particles of chromium hexacyanoferrate(II) decrease in the order of Eu³⁺>Sr²⁺>Na⁺⊃Cs⁺.     

Theoretical prediction on vibrational spectra of [Ar...Ar-H]<Superscript>+</Superscript>

Centrosymmetric linear [Ar-H-Ar]⁺ and asymmetric linear [Ar---Ar-H]⁺ are two stable configurations of [Ar₂H]⁺. Based on the global potential energy surface of [Ar₂H]⁺ provided by our group recently, we calculated the vibrational spectra of [Ar---Ar-H]⁺ with total angular momentum J = 0 by time-dependent quantum mechanical method, and the influence of quantum tunneling effect on vibrational spectra was found. With the help of the observation on the eigenstate functions and the modified potential energy surface, assignments were made to the spectra. The strong coupling between the excited bending mode of [Ar-H-Ar]⁺ and the vibrational states of [Ar---Ar-H]⁺ was discussed.     

Thermodynamic Study on the Protonation and Na<Superscript>+</Superscript>, Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>-Complexation of a Biodegradable Chelant (HEIDA) at Different Ionic Strengths and Temperatures

A potentiometric method has been used for the determination of the protonation constants of N-(2-hydroxyethyl)iminodiacetic acid (HEIDA or L) at various temperatures 283.15?≤?T/K?≤?383.15 and different ionic strengths of NaCl_(aq), 0.12?≤?I/mol·kg^?1?≤?4.84. Ionic strength dependence parameters were calculated using a Debye–Hückel type equation, Specific Ion Interaction Theory and Pitzer equations. Protonation constants at infinite dilution calculated by the SIT model are \( \log_{10} \left( {{}^{T}K_{1}^{\text{H}} } \right) = 8.998 \pm 0.008 \) (amino group), \( \log_{10} \left( {{}^{T}K_{2}^{\text{H}} } \right) = 2.515 \pm 0.009 \) and \( \log_{10} \left( {{}^{T}K_{3}^{\text{H}} } \right) = 1.06 \pm 0.002 \) (carboxylic groups). The formation constants of HEIDA complexes with sodium, calcium and magnesium were determined. In the first case, the formation of a weak complex species, NaL, was found and the stability constant value at infinite dilution is log₁₀K_NaL?=?0.78?±?0.23. For Ca²⁺ and Mg²⁺, the CaL, CaHL, CaL₂ and MgL species were found, respectively. The calculated stability constants for the calcium complexes at T?=?298.15 K and I?=?0.150 mol·dm^?3 are: log₁₀β_CaL?=?4.92?±?0.01, log₁₀β_CaHL?=?11.11?±?0.02 and \( \log_{10} \beta_{\text{Ca{L}}_{2}} \)?=?7.84?±?0.03, while for the magnesium complex (at I?=?0.176 mol·dm^?3): log₁₀β_MgL?=?2.928?±?0.006. Protonation thermodynamic functions have also been calculated and interpreted.     

Development of [<Superscript>64</Superscript>Cu]-DOTA-anti-CD20 for targeted therapy

Copper-64 was produced as a by-product of ⁵⁵Co via ⁶⁴Ni(p,n)⁶⁴Cu by 15 MeV proton bombardment of ^natNi resulting in a thick target yield of 5.31 MBq/μAh (143.5 μCi/μAh) and a radiochemical separation yield of 95% (radionuclide purity >97% after 25 hours of bombardment). Rituximab was successively labeled with [⁶⁴Cu]-CuCl₂. N-succinimidyl-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA-NHS) was prepared at 25 °C using DOTA and N-hydroxy succinimide (NHS) in CH₂Cl₂ followed by the addition of 1 ml of a Rituximab pharmaceutical solution. Radiolabeling was performed at 37 °C in 3 hours. Radio thin-layer chromatography showed an overall radiochemical purity of 90–95% at optimized conditions (specific activity=30 GBq/mg, labeling efficacy; 82%) using various chromatography systems. The final isotonic ⁶⁴Cu-DOTA-Rituximab complex was passed through a 0.22 μm filter and checked by gel electrophoresis for radiolysis control. Stability of the final product was checked in the formulation and in presence of human serum at 37 °C.     

A Radical-Mediated Pathway for the Formation of [M + H]<Superscript>+</Superscript> in Dielectric Barrier Discharge Ionization

Active capillary plasma ionization is a highly efficient ambient ionization method. Its general principle of ion formation is closely related to atmospheric pressure chemical ionization (APCI). The method is based on dielectric barrier discharge ionization (DBDI), and can be constructed in the form of a direct flow-through interface to a mass spectrometer. Protonated species ([M + H]⁺) are predominantly formed, although in some cases radical cations are also observed. We investigated the underlying ionization mechanisms and reaction pathways for the formation of protonated analyte ([M + H]⁺). We found that ionization occurs in the presence and in the absence of water vapor. Therefore, the mechanism cannot exclusively rely on hydronium clusters, as generally accepted for APCI. Based on isotope labeling experiments, protons were shown to originate from various solvents (other than water) and, to a minor extent, from gaseous impurities and/or self-protonation. By using CO₂ instead of air or N₂ as plasma gas, additional species like [M + OH]⁺ and [M ? H]⁺ were observed. These gas-phase reaction products of CO₂ with the analyte (tertiary amines) indicate the presence of a radical-mediated ionization pathway, which proceeds by direct reaction of the ionized plasma gas with the analyte. The proposed reaction pathway is supported with density functional theory (DFT) calculations. These findings add a new ionization pathway leading to the protonated species to those currently known for APCI.

Open image in new window

Graphical Abstract ?

     

Thermodynamics of ion exchange of H<Superscript>+</Superscript> by Na<Superscript>+</Superscript> or NH<Subscript>4</Subscript><Superscript>+</Superscript> on ion-exchange resins based on <Emphasis Type="Italic">C</Emphasis>-tetramethylcalix[4]resorcinarene

The corrected selectivity coefficients of the ion exchange H⁺-Na⁺ and H⁺-NH₄ ⁺ on ion-exchange resins based on C-tetramethylcalix[4]resorcinarene were calculated from the experimental data obtained from studying ion-exchange equilibria. The preference of the ion-exchange resins for cations increases in the sequence: Na⁺ < NH₄ ⁺ < < H⁺, and the ion-exchange resin based on (2-furyl)hydroxymethyltetramethylcalix[4]resorcinarene has a higher preference for ammonium cations. According to the results of microcalorimetric measurements, the exchange H⁺-Na⁺ on this ion-exchange resin is accompanied by the highest change in the differential enthalpy. It follows from the quantum-chemical calculations that the introduction of a (2-furyl)hydroxymethyl group into the structure of the polymer induces additional electrostatic interactions between an ammonium cation and an elementary unit of the ion-exchange resin.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2560–2563, December, 2004.     

Ion-exchange selectivity of a network calixarene-containing polymer obtained by the template synthesis on Na<Superscript>+</Superscript>, K<Superscript>+</Superscript>, and Ba<Superscript>2+</Superscript> matrices

The ion-exchange equilibrium in network polymers obtained from cis-2,8,14,20-tetraphenyl-4,6,10,12,16,18,22,24-octahydroxycalix[4]arene by template synthesis on cations Na⁺, K⁺, and Ba²⁺ as matrices was studied. The selectivity coefficients of ion exchanges Ba²⁺-H⁺, Na⁺-H⁺, K⁺-H⁺, Na⁺-K⁺, and Na⁺-NH₄ ⁺ were determined. The template synthesis enhanced the affinity of the polymers to matrix-forming cations by 6–8 kJ mol⁻¹. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1919–1922, August, 2005.     

A new calix[4]arene Schiff base sensor for Hg<Superscript>2+</Superscript> and Au<Superscript>3+</Superscript>

This article reports the selective sensing ability of a newly synthesized calix[4]arene Schiff base (C4TSB) derivative. C4TSB exhibited strong turn-off fluorescence affinity for Hg²⁺ and Au³⁺. The selective sensing ability of receptor was investigated in the presence of different co-existing competing ions. The limit of detection for Hg²⁺ and Au³⁺ was determined as 1.9 × 10^?5 and 1.0 × 10^?6 M, respectively. Receptor forms 1:1 stoichiometric complex with both metals and their binding constants were calculated as 7.9 × 10³ M^?1 for Hg²⁺ and 5.7 × 10³ M^?1 for Au³⁺. Complexes were also characterized through FT-IR spectroscopy.     

Competitive binding of Na<Superscript>+</Superscript> and Ca<Superscript>2+</Superscript> ions to teichoic acid analogues

The competitive binding of monovalent and divalent counterions to poly(alkylene phosphate) related to bacterial teichoic acids and poly(styrenesulfonate) was studied experimentally by potentiometry with ion-selective electrodes. The binding of calcium ions and the release of sodium ions accompanying calcium ions binding in aqueous solutions of the polyelectrolytes was analysed and the mean exchange ratio Na⁺/Ca²⁺ was estimated. It was found that in the process of addition of calcium ions to sodium poly(alkylene phosphate) and sodium poly(styrenesulfonate) solutions all the Ca²⁺ ions added are bound to polyions and the initially condensed Na⁺ ions are released proportionally to the concentration of the added Ca²⁺ ions up to the critical concentration of the Ca²⁺ ions added. For a molar concentration ratio of calcium counterions to charged groups on the polyion up to 0.20 the exchange ratio was approximately equal to 1 or 2 for the sodium poly(alkylene phosphate)/CaCl₂ and sodium poly(styrenesulfonate)/CaCl₂ systems, respectively.     

Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.     

The standard thermodynamic characteristics of resolvation of the K<Superscript>+</Superscript>, Ca<Superscript>2+</Superscript>, Cd<Superscript>2+</Superscript>, and Br<Superscript>−</Superscript> ions in water-acetone mixtures

The standard real and chemical thermodynamic characteristics of transfer of the K⁺, Ca²⁺, Cd²⁺, and Br^? ions from water into water-acetone solvents of various compositions were analyzed to study the rules governing the solvation of these ions in mixed solvents and its special features. All calculations were performed within the framework of the vertical jet method at 298.15 K. The energy of resolvation as a function of ion charges and crystallographic radii was found to increase in the series K⁺ < Ca²⁺ < Cd²⁺ < Al³⁺     

Cationization of simple organic molecules by singly-charged Ag<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> cluster ions in matrix-assisted laser desorption/ionization mass spectrometry: Metal cluster-molecule interactions

It was found earlier that under matrix-assisted laser desorption/ionization (MALDI) conditions several organic compounds which produce adduct with silver ions, are also capable of forming adducts with Ag(3)(+) cluster ions under appropriate conditions. The Ag(3)(+) cluster ion can be in situ generated under the MALDI analysis conditions from silver trifluoroacetate cationization agent in the presence of organic MALDI matrices. In this article the fragmentation of a commercial plasticizer, a peracetylated isoflavone glycoside and a pyrazolylphenyl disulfide derivative cationized with silver ions and Ag(3)(+) cluster ions are compared. It was observed that the complexes of Ag(3)(+) are less fragmented than the corresponding adduct ions with Ag(+). The presumable fragmentation channel of [M + Ag(3)(+)] is the elimination of Ag(2) units from these complexes. No significant dissociation of [M + Ag(3)(+)], into M and Ag(3)(+) takes place, indicating a tight connection between the corresponding molecule and Ag(3)(+) cluster ion. However, with a compound carrying very labile groups, such as the pyrazolylphenyl disulfide derivative, intramolecular cleavages can occur prior to significant dissociation of the Ag(3)(+) cluster ion.     

Synthesis,structure formation,and thermal expansion of A<Superscript>+</Superscript>M<Superscript>2+</Superscript>MgE<Superscript>4+</Superscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

The compounds AMMgE(PO₄)₃ (A = Na, K, Rb, Cs; M = Sr, Pb, Ba; E = Ti, Zr) were synthesized by the sol–gel procedure followed by heat treatment and studied by X-ray diffraction, differential thermal and electron microprobe analysis, and IR spectroscopy. The phosphates crystallize in the kosnarite (KZr₂(PO₄)₃, space group \(R\bar 3\)) and langbeinite (K₂Mg₂(SO₄)₃, space group P2₁3) structural types. The structure of KPbMgTi(PO₄)₃ was refined by full-profile analysis (space group P2₁3, Z = 4, a = 9.8540(3) Å, V = 956.83(4) ų). The structure is formed by a framework of vertex-sharing MgO₆ and TiO₆ octahedra and PO₄ tetrahedra. The K and Pb atoms fully occupy the extra-framework cavities and are coordinated to nine oxygen atoms. A variable-temperature X-ray diffraction study of KPbMgTi(PO₄)₃ showed that the compound expands isotropically and refer to medium-expansion class (linear thermal expansion coefficients α _a = α _b = α _c = 8 × 10^–6°C^–1). The number of stretching and bending modes of the PO₄ tetrahedron observed in the IR spectra is in agreement with that predicted by the factor group analysis of vibrations for space groups \(R\bar 3\) and P2₁3. A structural transition from the cubic langbeinite to the rhombohedral kosnarite was found for CsSrMgZr(PO₄)₃. In the morphotropic series of ASrMgZr(PO₄)₃ (A = Na, K, Rb, Cs) the kosnarite–langbeinite transition occurs upon the Na → K replacement. The effect of the sizes and electronegativities of cations combined in AMMgE(PO₄)₃ on the change of the structural type was analyzed.     

<Superscript>18</Superscript>F- and <Superscript>11</Superscript>C-labelling of quantum dots with n.c.a. [<Superscript>18</Superscript>F]fluoroethyltosylate and [<Superscript>11</Superscript>C]methyliodide: a feasibility study

Quantum dots functionalized on the outer surface with either amino- or carboxyl functions were labelled with [¹⁸F]fluoroethyltosylate and [¹¹C]methyliodide in order to use the positron emitter-labelled fluorescence agents for multimodality imaging techniques, i.e. fluorescence imaging and positron emission tomography. ¹⁸F-Labelling of both compounds was realized with yields up to 5% as determined by size exclusion chromatography, which is twice as much as reported in literature before [1]. ¹¹C-Labelling of amino- and carboxyl-QDs proceeded with good yields (up to 45 and 35%, respectively) under optimized reaction conditions. In general for both QD-types and both labelling agents the labelling yield increased with the amount of QDs used in the reaction as well as with reaction time and reaction temperature.     

Factors affecting the sorption behavior of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> using biosorbent material

In this study, saw dust has been used as precursor for production of low cost activated carbon using potassium hydroxide (KOH) and steam activation technique. The activated carbon was used to remove Cs⁺ and Sr²⁺ ions from aqueous solutions by batch operation, and the extent of adsorption was investigated as a function of solution pH, temperature, shaking time, and initial concentration. The influence of interfering ions was also investigated. The removal of metal ions was pH dependent and the adsorption capacity reaches its maximum 43% and 61.5% at pH 5.0 and 6.0 for Cs⁺ and Sr²⁺ ions, respectively. Thermodynamic studies showed different behaviours where an endothermic, non-spontaneous process was shown for Cs⁺ while an exothermic, spontaneous process was obtained for Sr²⁺. The kinetic data of both ions was described well by pseudo-second order rate equation. The two equilibrium models (Langmuir and Freundlich) have been also applied. Desorption studies indicated that HCl was the most effective desorbing eluent. The investigated adsorbent showed good results towards cesium and strontium removal from aqueous media that could be a promising method due to its low-cost and good efficiency.     

Sorption of Cs<Superscript>+</Superscript> and Sr<Superscript>2+</Superscript> by ion exchanger based on titanium phosphate

Sorption capacity of a composite ion exchanger based on titanium phosphate for Cs⁺ and Sr²⁺ cations was studied. The effect of pH and concentration of salts and, in particular, sodium chloride in solution on the sorption efficiency and distribution coefficient was analyzed. The diffusion coefficients were calculated for the Cs⁺ and Sr²⁺ cations and the time of half-exchange of the Na⁺ cation for the Cs⁺ and Sr²⁺ cations was found.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.