Chloroperoxidase Modified Electrode for Amperometric Determination of 2,4,6‐Trichlorophenol

A carbon paste‐poly(o‐phenylendiamine)‐modified electrode to be used as amperometric biosensor for 2,4,6‐trichlorophenol (TCP) is described. The enzyme chloroperoxidase (EC 1.11.1.10) from Caldariomyces fumago is immobilized through dispersion in a graphite paraffin oil carbon paste covered by an electrogenerated poly(o‐phenylendiamine) (PPD) layer. The main enzymatic dehalogenation product, 2,6‐dichloro‐1,4‐benzoquinone (DCQ) is characterized by liquid chromatography‐mass spectrometry and cyclic voltammetry. This product is electrochemically active and can be detected amperometrically at +150 mV vs. Ag|AgCl|KCl (3 M). The biosensor exhibits a response time of 4 min, a detection limit of 10^?7 M, and a dynamic linear range between 10^?7 and 10^?6 M. Selectivity as well as operating and storage stability were evaluated.     

Synthesis and Characterization of m‐Terphenyl (1,3‐Diphenylbenzene) Compounds Containing Trifluoromethyl Groups

The bis(silyl)triazene compound 2,6‐(Me₃Si)₂‐4‐Me‐1‐(N?N? NC₄H₈)C₆H₂ ( 4 ) was synthesized by double lithiation/silylation of 2,6‐Br₂‐4‐Me‐1‐(N?N? NC₄H₈)C₆H₂ ( 1 ). Furthermore, 2,6‐bis[3,5‐(CF₃)₂‐C₆H₃]‐4‐Me‐C₆H₂‐1‐(N?N? NC₄H₈)C₆H₂ derivative 6 can be easily synthesized by a C,C‐bond formation reaction of 1 with the corresponding aryl‐Grignard reagent, i.e., 3,5‐bis[(trifluoromethyl)phenyl]magnesium bromide. Reactions of compound 4 with KI and 6 with I₂ afforded in good yields novel phenyl derivatives, 2,6‐(Me₃Si)₂‐4‐MeC₆H₂? I and 2,6‐bis[3,5‐(CF₃)₂? C₆H₃]‐4‐MeC₆H₂? I ( 5 and 7 , resp.). On the other hand, the analogous m‐terphenyl 1,3‐diphenylbenzene compound 2,6‐bis[3,5‐(CF₃)₂? C₆H₃]C₆H₃? I ( 8 ) could be obtained in moderate yield from the reaction of (2,6‐dichlorophenyl)lithium and 2 equiv. of aryl‐Grignard reagent, followed by the reaction with I₂. Different attempts to introduce the ^tBu (Me₃C) or neophyl (PhC(Me)₂CH₂) substituents in the central ring were unsuccessful. All the compounds were fully characterized by elemental analysis, melting point, IR and NMR spectroscopy. The structure of compound 6 was corroborated by single‐crystal X‐ray diffraction measurements.     

Synthesis and Characterization of Bimetallic Nickel and Cobalt Carbonyl Complexes Containing Stannyl Groups

The bimetallic NiSn₂ complex Ni(SnBu₃^t)₂(CO)_3, 1, was obtained from the reaction of Ni(COD)₂ and Bu₃^tSnH and CO. The reaction of Co₂(CO)₈ and Bu₃^tSnH afforded the bimetallic Co–Sn complex Co(SnBu₃^t)(CO)₄, 3. Compound 3 was also obtained from the reaction of Co₄(CO)₁₂ and Bu₃^tSnH but in a lower yield. Both compounds 1 and 3 were characterized by single crystal X-ray diffraction, and possess trigonal bipyramidal geometries around the transition metal centre with two and one stannyl ligands, respectively.     

Cetylpyridinium Chloride as a Regulator in Paper Separation of 2,4‐Dichlorophenol and 2,4,6‐Trichlorophenol in Water

2,4‐Dichlorophenol (2,4‐DCP) and 2,4,6‐trichlorophenol (2,4,6‐TCP) by the use of cetylpyridinium chloride (CPCl) as a regulator was studied for their separation by the paper capillary permeation adsorption (PCPA) separation technique. The effect of pH, the type of PCPA treatment, the concentration of cetylpyridinium chloride, and various inorganic salts on the separatability has been investigated. A nearly 100% separatability was obtained at pH values 5–11 and 5–11, respectively, for 2,4‐dichlorophenol and 2,4,6‐trichlorophenol when cetylpyridinium chloride was present. It was confirmed that 2,4‐dichlorophenol and 2,4,6‐trichlorophenol are separated by adsorption on the fiber surface as ion pairs at the pH. Addition of inorganic salts decreases the separatability.     

Synthesis and Characterization of New Polymer Systems Containing 4‐Silylmethylstyrene Units

A series of terpolymers containing silyl pendant groups were prepared by free radical cross‐linking copolymerization. Et₃Si and HMe₂Si were covalently linked with 4‐vinylbenzyl and abbreviated as TESiMSt and DMSiMSt, respectively. Et₃Si was covalently linked with 2‐hydroxyethyl methacrylate (HEMA). The silyl‐linked HEMA are abbreviated as TESiEMA. Free radical terpolymerization of the methacrylic acid (MAA) with different molar ratios of organosilyl monomers was carried out at 60–70 °C. The compositions of the polymers were determined by FT‐IR spectroscopy and ¹H‐NMR. The glass transition temperature (Tg) of the polymers was determined calorimetrically. The study of DSC curves showed that incorporation of monomers with cyclic units in polymer chains increases the rigidity of terpolymers and the Tg value is subsequently increased.     

Novel Cobalt (II) Phthalocyanine‐Containing Polyimides: Synthesis,Characterization, Thermal and Optical Properties

Summary: A novel class of polymer has been prepared by reaction of a copolyimide containing carboxylic acid groups, and a cobalt phthalocyanine peripherally substituted with a reactive hydroxyl group. The incorporation of the phthalocyanine ring was achieved by esterification of the carboxylic acid groups of the polyimide with the free hydroxyl group of the phthalocyanine. In this work, a limited number of phthalocyanine rings have been introduced in order to avoid extensive modification of the copolyimide properties. The extent of modification (percentage of esterified carboxylic groups) was estimated to be about 18%. The resulting material showed good thermal stability and a high glass transition temperature (above 300 °C). The incorporation of the bulky phthalocyanine ring brought about a light decrease of thermal properties, relative to those of the initial polyimide. The presence of phthalocyanine was confirmed by the absorption band at 670 nm showing in the visible region for the modified polyimide. The novel copolyimide also exhibited a remarkable emission peak at 430 nm, when excited at 350 nm, corresponding to the emission of the cobalt phthalocyanine moiety.

Schematic representation of the PI‐CoPc molecule and the chemical structure of the repeat unit.     

Synthesis,Characterization and Antibacterial Activity of BiVO4 Microstructure

Russian Journal of Physical Chemistry A - Hyperbranched BiVO4 microstructure were successfully synthesized by a hydrothermal method. Upon characterization the products by X-ray diffraction (XRD),...     

Hybrid 4‐Aminoquinoline‐1,3,5‐triazine Derivatives: Design,Synthesis, Characterization,and Antibacterial Evaluation

A series of novel 4‐aminoquinoline 1,3,5‐triazine derivatives were synthesized and characterized by FTIR, ¹H‐NMR, ¹³C‐NMR, MS, and elemental analysis. The antibacterial activities of synthesized compounds were tested against three Gram‐positive bacteria, namely Bacillus subtilis (NCIM‐2063), Bacillus cereus (NCIM‐2156), and Staphylococcus aureus (NCIM‐2079), and four Gram‐negative bacteria, namely Proteus vulgaris (NCIM‐2027), Proteus mirabilis (NCIM‐2241), Escherichia coli (NCIM‐2065), and Pseudomonas aeruginosa (NCIM‐2036), using ciprofloxacin as reference standard drug. Results showed compound 9a and 9e as potent antibacterial agents against all bacterial strains except Bacillus cereus (NCIM‐2156). Copyright © 2014 HeteroCorporation     

Hydrothermal Synthesis and Characterization of Visible-Light-Driven Dumbbell-Like BiVO4 and Ag/BiVO4 Photocatalysts

Visible-light-driven dumbbell-like BiVO₄ and Ag/BiVO₄ photocatalysts has been successfully synthesized by a simple hydrothermal method at 180 °C for 24 h. The as-synthesized photocatalysts were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and UV–Vis absorption spectroscopy. The results obtained showed that ethylenediamine, citric acid, pH and hydrothermal reaction temperature have pronounced effects on the morphology of BiVO₄. Transmission electron microscopy observation shows that the Ag nanoparticles are homogenously dispersed on the surface of the BiVO₄ nanorods. Photocatalytic activities of the dumbbell-like BiVO₄ and Ag-loaded BiVO₄ photocatalysts were also evaluated by using methylene blue as a representative dye indicator under visible light irradiation. It is found that the photocatalytic performance of the as-synthesized BiVO₄ is obviously improved with the incorporation of the Ag nanoparticles. Mechanism for the enhancement of the photocatalytic activity of the Ag/BiVO₄ photocatalyst is also discussed.     

15N NMR spectra and reactivity of 2,4,6‐triazidopyridines, 2,4,6‐triazidopyrimidine and 2,4,6‐triazido‐s‐triazine

2,4,6‐Triazido‐s‐triazine, 2,4,6‐triazidopyrimidine and six different 2,4,6‐triazidopyridines were studied by ¹⁵N NMR spectroscopy. The assignment of signals in the spectra was performed using the gauge‐independent atomic orbital (GIAO)–Tao‐Perdew‐Staroverov‐Scuseria exchange‐correlation functional (TPSS)h/6‐311+G(d,p) calculations on the M06‐2X/6‐311+G(d,p) optimized molecular geometries. The Truhlar and coworkers' continuum solvation model called SMD was applied to treat solvent effects. With this approach, the root mean square error in estimations of the ¹⁵N chemical shifts for the azido groups was just 1.9 ppm. It was shown that the different reactivity of the α‐ and γ‐azido groups in pyridines correlates well with the chemical shifts of the N_α signals of these groups. Of two nonequivalent azido groups of azines, the azido group with the most shielded N_α signal is the most electron‐deficient and reactive toward electron‐rich reagents. By contrast, the azido group of azines with the most deshielded N_α signal is the most reactive toward electron‐poor reagents. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Cytotoxicity of Arene‐Ru Compounds Containing 4‐Nitroaniline or 2‐Halogenated 4‐Nitroaniline

The compounds [(η⁶‐p‐cymene)RuCl₂(4‐nitroaniline)] and [(η⁶‐p‐cymene)RuCl₂(2‐halogen‐4‐nitroaniline)] were synthesized and characterized by various means. The [(η⁶‐p‐cymene)RuCl₂(4‐nitroaniline)] and [(η⁶‐p‐cymene)RuCl₂(2‐fluoro‐4‐nitroaniline)] compounds were determined by X‐ray diffraction, appearing in a distorted piano‐stool type of arrangement with similar bond lengths and angles around the ruthenium. The compounds exhibited moderate to strong in vitro cytotoxicity against A549 and MCF‐7 human cancer cells. Substitution of heavy halogen atom on the ortho position of para‐nitroaniline weakened the cytotoxicity against both of MCF‐7 and A549, except the cases of fluorine substitution for hydrogen atom regarding A549 and bromine substitution for chlorine atom regarding MCF‐7, which showed minor deviation.     

Synthesis and Characterization of (–)‐Menthyl Containing N‐Alkyl Cycloimmonium Salts

The reaction of 4‐phenyl‐2‐aminothiazole or 2‐amino pyridine with α‐bromo acetic (–)‐menthyl ester ( 2c ) yields new N‐alkyl cycloimmonium bromides ( 1c , 3 ) with the chiral (–)‐menthyl substituent, which were isolated and fully characterized by ¹H and ¹³C NMR spectroscopy for the first time. In addition, starting from 4‐phenyl‐2‐aminothiazole, two further N‐alkyl cycloimmonium bromides ( 1a , 1b ) were prepared. The molecular and crystal structures of all three thiazole derived N‐alkyl cycloimmonium bromides ( 1a – c ) were determined by single‐crystal X‐ray diffraction. In all cases the crystal structures are dominated by N–H ··· Br hydrogen bonds, which results in the formation of an extensive hydrogen bonded network in the crystal. Interestingly, in all structures S ··· Br^– distances shorter than the sum of the van der Waals radii are observed.     

Synthesis and Structure of Low‐valent η4‐Cinnamaldehyde Cobalt Complexes

Three η⁴‐(C=C–C=O) coordination cobalt(I) complexes 1 – 3 were synthesized by the reactions of cinnamaldehyde, p‐fluorocinnamaldehyde, and p‐chlorocinnamaldehyde with CoMe(PMe₃)₄. Complex 4 as η²‐(C=C) coordination was prepared by the reaction of chalcone with Co(PMe₃)₄. The structures of complexes 1 – 4 were confirmed by single‐crystal X‐ray diffraction. Although the reactions didn't undergo C–H bond activation and decarbonylation, the formation of complexes 1 – 4 deepens our understanding of the reactions between α,β‐unsaturated aldehyde or ketone with low‐valent central cobalt atom.     

Synthesis and Characterization of Oligonucleotides Containing 2′‐Deoxyxanthosine Using Phosphoramidite Chemistry

Oligodeoxynucleotides containing 2′‐deoxyxanthosine (X_d) were synthesized in good yield from a O²,O⁶‐bis[2‐(4‐nitrophenyl)ethyl](NPE)‐protected phosphoramidite of X_d. Attempts to synthesize a O⁶‐monoNPE‐protected phosphoramidite resulted in formation of a major by‐product. The NPE protecting groups were removed by treatment with oximate ion after other protecting groups were removed with aqueous NH₄OH solution. The composition of the synthetic oligonucleotides was verified by enzymatic degradation and MALDI‐TOF mass spectrometry. The efficacy of this procedure allowed isolation of oligodeoxynucleotides containing multiple X_d residues.     

4‐Nitro‐3‐(5‐tetrazole)furoxan and Its Salts: Synthesis,Characterization, and Energetic Properties

A series of new energetic salts based on 4‐nitro‐3‐(5‐tetrazole)furoxan (HTNF) has been synthesized. All of the salts have been fully characterized by nuclear magnetic resonance (¹H and ¹³C), infrared (IR) spectroscopy, elemental analysis, and differential scanning calorimetry (DSC). The crystal structures of neutral HTNF ( 3 ) and its ammonium ( 4 ) and N‐carbamoylguanidinium salts ( 9 ) have been determined by single‐crystal X‐ray diffraction analysis. The densities of 3 and its nine salts were found to range from 1.63 to 1.84 g cm^?3. Impact sensitivities have been determined by hammer tests, and the results ranged from 2 J (very sensitive) to >40 J (insensitive). Theoretical performance calculations (Gaussian 03 and EXPLO 5.05) provided detonation pressures and velocities for the ionic compounds 4 – 12 in the ranges 25.5–36.2 GPa and 7934–8919 m s^?1, respectively, which make them competitive energetic materials.     

含Co纳米介孔分子筛的制备与表征

用两步水热法合成出了含Co介孔分子筛,采用XRD,FT-IR,TPR,AFM,BET,B JH等方法对样品的物化性能进行了表征.结果表明合成出了纳米级具有介孔结构的CoMCM-41.样品在550℃焙烧可以将模板剂有效去除而不影响孔结构.所得CoMCM-41比表面积大于500 m2/g,平均孔径分布为3.57 nm,粒径分布在20~40 nm范围内.     

Synthesis and Characterization of Biphenylene‐Containing Diazaacenes

We describe the efficient synthesis of substituted benzo[3,4]cyclobuta[1,2‐b]phenazine, benzo[3,4]cyclobuta[1,2]benzo[1,2‐i]phenazine, and benzo[3,4]cyclobuta[1,2‐b]naphtho[2,3‐i]phenazine by a condensation reaction of aromatic diamines with the stable biphenylene‐2,3‐dione.