Functionalized gold nanoparticles as phosphorescent nanomaterials and sensors

Ligand-capped gold nanoparticles were synthesized by capping monothiol derivatives of 2,2'-dipyridyl onto the surface of Au nanoparticles (Au-BT). The average size of the metal core is around 4 nm, with a shell of approximately 340 bipyridine ligands around the Au nanoparticle. The high local concentration of the chelating ligands ( approximately 5 M) around the Au nanoparticle makes these particles excellent ion sponges, and their complexation with Eu(III)/Tb(III) ions yields phosphorescent nanomaterials. Absorption spectral studies confirm a 1:3 complexation between Eu(III)/Tb(III) ions and bipyridines, functionalized on the surface of Au nanoparticles. The red-emitting Au-BT:Eu(III) complex exhibits a long lifetime of 0.36 ms with six line-like emission peaks, whereas the green-emitting Au-BT:Tb(III) complex exhibits a lifetime of 0.7 ms with four line-like emission peaks. These phosphorescent nanomaterials, designed by linking BT:Eu(III) complexes to Au nanoparticles, were further utilized as sensors for metal cations. A dramatic decrease in the luminescence was observed upon addition of alkaline earth metal ions (Ca(2+), Mg(2+)) and transition metal ions (Cu(2+), Zn(2+), Ni(2+)), resulting from an isomorphous substitution of Eu(III) ions, whereas the luminescence intensity was not influenced by the addition of Na(+) and K(+) ions. Direct interaction of bipyridine-capped Au nanoparticles with Cu(2+) ions brings the nanohybrid systems closer, leading to the formation of three-dimensional superstructures. Strong interparticle plasmon interactions were observed in these closely spaced Au nanoparticles.     

Deposition of gold nanoparticles on silica spheres by electroless metal plating technique

A previously proposed method for metal deposition with silver [Kobayashi et al., Chem. Mater. 13 (2001) 1630] was extended to uniform deposition of gold nanoparticles on submicrometer-sized silica spheres. The present method consisted of three steps: (1) the adsorption of Sn(2+) ions took place on surface of silica particles, (2) Ag(+) ions added were reduced and simultaneously adsorbed to the surface, while Sn(2+) was oxidized to Sn(4+), and (3) Au(+) ions added were reduced and deposited on the Ag surface. TEM observation, X-ray diffractometry, and UV-vis absorption spectroscopy revealed that gold metal nanoparticles with an average particle size of 13 nm and a crystal size of 5.1 nm were formed on the silica spheres with a size of 273 nm at an Au concentration of 0.77 M.     

Functionalized gold nanoparticles as nanosensor for sensitive and selective detection of silver ions and silver nanoparticles by surface-enhanced Raman scattering

We have developed a surface-enhanced Raman scattering (SERS) nanosensor firstly for Ag ions and Ag nanoparticles detection based on 2-mercaptoisonicotinic acid (2MNA)-functionalized Au nanoparticles. Ag(+) can coordinate with 2MNA resutling in a variation of its SERS spectrum, which is used as a criterion to determine Ag(+) in a solution. This sensor exhibits a detection limit no more than 25 nM and has a high selectivity against other metal ions. More importantly, it can be directly applied in real sample detection.     

Laser-assisted synthesis of Au-Ag alloy nanoparticles in solution

By using laser-induced heating, we prepared Au-Ag nanoalloys via three different procedures: (i) mixture of Au nanoparticles and Ag(+) ions irradiated by a 532 nm laser, (ii) mixture of Au and Ag nanoparticles irradiated by a 532 nm laser, and (iii) mixture of Au and Ag nanoparticles irradiated by a 355 nm laser. Procedure i is advantageous for the production of spherical alloy nanoparticles; in procedures ii and iii, nanoalloys with a sintered structure have been obtained. The morphology of the obtained nanoalloys depends not only on the laser wavelength but also on the concentration of nanoparticles in the initial mixture. When the total concentration of Ag and Au nanoparticles in the mixture is increased, large-scale interlinked networks have been observed upon laser irradiation. It is expected that this selective heating strategy can be extended to prepare other bi- or multi-metallic nanoalloys.     

Galvanic replacement reactions of active-metal nanoparticles

We present a systemic investigation of a galvanic replacement technique in which active-metal nanoparticles are used as sacrificial seeds. We found that different nanostructures can be controllably synthesized by varying the type of more noble-metal ions and liquid medium. Specifically, nano-heterostructures of noble metal (Ag, Au) or Cu nanocrystals on active-metal (Mg, Zn) cores were obtained by the reaction of active-metal nanoparticles with more noble-metal ions in ethanol; Ag nanocrystal arrays were produced by the reaction of active-metal nanoparticles with Ag(+) ions in water; spongy Au nanospheres were generated by the reaction of active-metal nanoparticles with AuCl(4)(-) ions in water; and SnO(2) nanoparticles were prepared when Sn(2+) were used as the oxidant ions. The key factors determining the product morphology are shown to be the reactivity of the liquid medium and the nature of the oxidant-reductant couple, whereas Mg and Zn nanoparticles played similar roles in achieving various nanostructures. When microsized Mg and Zn particles were used as seeds in similar reactions, the products were mainly noble-metal dendrites. The new approach proposed in this study expands the capability of the conventional nanoscale galvanic replacement method and provides new avenues to various structures, which are expected to have many potential applications in catalysis, optoelectronics, and biomedicine.     

Biogenic synthesis of Ag, Au and bimetallic Au/Ag alloy nanoparticles using aqueous extract of mahogany (Swietenia mahogani JACQ.) leaves

In this paper, we have demonstrated for the first time, the superb efficiency of aqueous extract of dried leaves of mahogany (Swietenia mahogani JACQ.) in the rapid synthesis of stable monometallic Au and Ag nanoparticles and also Au/Ag bimetallic alloy nanoparticles having spectacular morphologies. Our method was clean, nontoxic and environment friendly. When exposed to aqueous mahogany leaf extract, competitive reduction of Au(III) and Ag(I) ions present simultaneously in same solution leads to the production of bimetallic Au/Ag alloy nanoparticles. UV-visible spectroscopy was used to monitor the kinetics of nanoparticles formation. UV-visible spectroscopic data and TEM images revealed the formation of bimetallic Au/Ag alloy nanoparticles. Mahogany leaf extract contains various polyhydroxy limonoids which are responsible for the reduction of Au(III) and Ag(I) ions leading to the formation and stabilization of Au and Ag nanopaticles.     

Au nanoparticle-enhanced surface plasmon resonance sensing of biocatalytic transformations

N-(3-Aminopropyl)-N'-methyl-4,4'-bipyridinium is coupled to tiopronin-capped Au nanoparticles (diameter ca. 2 nm) to yield methyl(aminopropyl)viologen-functionalized Au nanoparticles (MPAV(2+)-Au nanoparticles). In situ electrochemical surface plasmon resonance (SPR) measurements are used to follow the electrochemical deposition of the bipyridinium radical cation modified Au nanoparticles on an Au-coated glass surface and the reoxidation and dissolution of the bipyridinium radical cation film. The MPAV(2+)-functionalized Au nanoparticles are also employed for the amplified SPR detection of NAD(+) and NADH cofactors. By SPR monitoring the partial biocatalyzed dissolution of the bipyridinium radical cation film in the presence of diaphorase (DP) NAD(+) is detected in the concentration range of 1x10(-4) M to 2x10(-3) M. Similarly, the diaphorase-mediated formation of the bipyridinium radical cation film on the Au-coated glass surface by the reduction of the MPAV(2+)-functionalized Au nanoparticles by NADH is used for the amplified SPR detection of NADH in the concentration range of 1x10(-4) M to 1x10(-3) M.     

Study of nucleation and growth mechanism of the metallic nanodumbbells

We propose a general nucleation and growth model that can explain the mechanism of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au nanodumbbells. Thus, we found that the nucleation event occurs as a result of reduction of Au(+) ions by partially oxidized surface Pt atoms. In cases when Au(3+) is used as a gold precursor, the surface of seeds should be terminated by ions (e.g., Co(2+), Pb(2+)) that can reduce Au(3+) to Au(+) ions, which can further participate in the nucleation of gold domain. Further growth of gold domain is a result of reduction of both Au(3+) and Au(+) by HDA at the surface of gold nuclei. We explain the different ability of CoPt(3), Pt, and FePt seeds to serve as a nucleation center for the reduction of gold and further growth of dumbbells. We report that the efficiency and reproducibility of the formation of CoPt(3)/Au, FePt/Au, and Pt/Au dumbbells can be optimized by the concentration and oxidation states of the surface ions on metallic nanocrystals used as seeds as well as by the type of the gold precursor.     

Reversible synthesis of sub-10 nm spherical and icosahedral gold nanoparticles from a covalent Au(CN)2(-) precursor and recycling of cyanide to form ferric ferrocyanide for cell staining

A solution approach based on Au(CN)(2)(-) chemistry is reported for the formation of nanoparticles. The covalent character of the Au(CN)(2)(-) precursor was exploited in the formation of sub-10?nm nanospheres (≈2.4?nm) and highly monodisperse icosahedral Au nanoparticles (≈8?nm) at room temperature in a one-pot aqueous synthesis. The respective spherical and icosahedral Au morphologies can be controlled by either the absence or presence of the polymer polyvinylpyrrolidone (PVP). Using Au(CN)(2)(-) as a metal ion source, our findings suggest that the addition of citrate ions is necessary to enhance the particle formation rate as well as to generate a more homogeneous colloidal dispersion. Because of the presence of oxygen and the operation of a CN(-) etching process associated with Au(CN)(2)(-) complex formation, an interesting reversible formation-dissolution process was observed, which allowed us to repeatedly prepare spherical and icosahedral Au nanoparticles. Time-dependent TEM images and UV/Vis spectra were carefully acquired to study the reversibility of this formation-dissolution process. In view of the accompanying generation of toxic cyanide anions, we have developed a protocol to recycle cyanide in the presence of citrate ions through ferric ferrocyanide formation. After completion of particle formation, the residual solutions containing citrate ions and cyanide ions were processed to stain iron oxide nanoparticles endocytosized in cells. Additionally, the as-prepared 8?nm Au icosahedra could be isolated and grown to larger 57?nm-sized icosahedra using the seed-mediated growth approach.     

Au/Ag核一壳结构复合纳米粒子形成机制的研究

在已制备好的Au纳米粒子表面,通过化学还原的方法沉积生长Ag包覆层,通过 控制Au, Ag的比列,制备了粒度均匀且粒径可控的Au/Ag核-壳结构纳米粒子。利用 UV-vis吸收光谱和透射电子显微镜（TEM）对SAu, Ag摩尔比为1：10的复合纳米粒 子的光学性质和形态进行随时监测,直接观察了核-壳结构纳米粒子的生长过程： 一部分Ag+在Au核表面还原生长,溶液中其余Ag+还原形成银的纳米团簇向粒子表面 的继续沉积生长,壳层增厚。     

pH-dependent aggregation of citrate-capped Au nanoparticles induced by Cu ions: The competition effect of hydroxyl groups with the carboxyl groups

The citrate-capped Au nanoparticles were found to undergo pH-dependent aggregation induced by Cu²⁺ ions. At low pH value (8.9), the Au nanoparticles aggregated into fractal-like structure induced by the coordination interactions between the carboxyl groups of citrate ligands and Cu²⁺ ions. At high pH value (10.1), the Au nanoparticles aggregated into close-packed structure attributed to the increased concentration of hydroxyl groups. The coordination interactions between the metal ions and the ligands were suppressed as a result of the competition effect of the hydroxyl groups with the carboxyl groups. The aggregation process was identified to be dominated by the cluster–cluster mechanism at the low pH value and the particle–cluster mechanism at the high pH value.     

Photoinduced dissolution and redeposition of Au nanoparticles supported on TiO2

Au particles (mean size ca. 3 nm) supported on TiO(2) particles were irradiated by UV light (>300 nm) in aqueous solutions at 278 K. Photo-induced dissolution of Au nanoparticles followed by redeposition occurred in aqueous solutions containing halogen ions. The dissolution of Au nanoparticles yielded a Au(III) complex with a halogen ion; subsequent reduction of the Au(III) complex caused precipitation of larger Au particles on TiO(2).     

Synthesis of aqueous Au core-Ag shell nanoparticles using tyrosine as a pH-dependent reducing agent and assembling phase-transferred silver nanoparticles at the air-water interface

We demonstrate that the amino acid tyrosine is an excellent reducing agent under alkaline conditions and may be used to reduce Ag+ ions to synthesize stable silver nanoparticles in water. The tyrosine-reduced silver nanoparticles may be separated out as a powder that is readily redispersible in water. The silver ion reduction at high pH occurs due to ionization of the phenolic group in tyrosine that is then capable of reducing Ag+ ions and is in turn converted to a semi-quinone structure. These silver nanoparticles can easily be transferred to chloroform containing the cationic surfactant octadecylamine by an electrostatic complexation process. The now hydrophobic silver nanoparticles may be spread on the surface of water and assembled into highly ordered, linear superstructures that could be transferred as multilayers onto suitable supports by the versatile Langmuir-Blodgett technique. Further, tyrosine molecules bound to the surface of Au nanoparticles through amine groups in the amino acid may be used to selectively reduce silver ions at high pH on the surface of the Au nanoparticles, thus leading to a simple strategy for realizing phase-pure Au core-Ag shell nanostructures.     

Synthesis and characterization of Au core-Au-Ag shell nanoparticles from gold seeds: impacts of glycine concentration and pH

This paper describes the preparation of Au core-Au-Ag shell nanoparticles (NPs) in different morphologies by controlling both the pH and the glycine concentration. Using a seed-growth method, we prepared high-quality Au core-Au-Ag shell NPs from a glycine solution under alkaline conditions (pH>8.5). By controlling both the pH and the glycine concentration, we prepared dumbbell-shaped and peanut-shaped Au core-Au-Ag shell NPs readily by depositing gold and silver, reduced by ascorbate, onto the gold nanorods. We have found that the glycine concentration that is optimal for preparing high-quality Au core-Au-Ag shell NPs differs at the various values of pH. At pH<8.5, the glycine concentration is not important, but, when preparing dumbbell- and peanut-shaped Au core-Au-Ag shell NPs, it should be greater than 50 mM and greater than 20 mM at pH 9.5 and 10.5, respectively. Glycine plays a number of roles during the synthesis of the Au core-Au-Ag shell NPs by controlling the solution pH, altering the reduction potentials of gold and silver ions through forming complexes with metal ions (Au(+) and Ag(+)), minimizing the formation of Ag(2)O, AgCl, and AgBr precipitates, and stabilizing the thus-prepared NPs. At pH 9.7, we observed the changes in the morphologies of the Au core-Au-Ag shell NPs-from regular (rectangular) to peanut- and dumbbell-shaped, and finally to jewel-, diamond-, and/or sphere-shaped-that occurred during the course of a 60-min reaction. In addition, we were able to affect the shapes and sizes of the Au core-Au-Ag shell NPs by controlling the reaction time.     

Formation mechanisms of gold-zinc oxide hexagonal nanopyramids by heterogeneous nucleation using microwave synthesis

This work reports the development of a fast and simple "one-pot" route for the synthesis of hybrid Au-ZnO hexagonal nanopyramids by sequential homogeneous-heterogeneous nucleation steps involving both Au and Zn ions using microwave irradiation (MWI). The rapid decomposition of zinc acetate by MWI in the presence of a mixture of oleic acid (OAc) and oleylamine (OAm) results in the formation of hexagonal ZnO nanopyramids. In the presence of Au ions, the initially formed Au nanocrystals act as heterogeneous nuclei for the nucleation and growth of the ZnO nanopyramids. The Au nanoparticles promote the heterogeneous nucleation of ZnO and the formation of the hexagonal base of the ZnO nanopyramids. Using preformed Au nanoparticles instead of Au ions results in a narrow size distribution of uniform Au-ZnO nanopyramids, each consisting of a gold nanoparticle embedded in the center of the hexagonal base of the ZnO nanopyramid. We study the factors that control the nucleation and growth of these complex structures, and provide new insights into the stepwise homogeneous-heterogeneous mechanism and the conventional heterogeneous nucleation on preformed Au nanoparticles. The formation of the hetero nanostructures Au-ZnO nanopyramids is strongly dependent on the molar ratios of OAc to OAm. The presence of OAc with a considerable dipole moment results in strong electrostatic interaction with the polar surfaces of the growing ZnO nanocrystals thus resulting in slowing the growth rate of the polar planes and allowing the formation of well-developed facets. In the absence of Au nanoparticles, a high concentration of zinc acetate and longer MWI times are required for the production of the nanopyramids. The gold nanoparticles could provide the metallic contact points within the hybrid nanopyramids which could facilitate the bottom-up assembly of Au-ZnO devices. Furthermore, the Au-ZnO nanopyramids could have improved performance in solar energy conversion and photocatalysis.     

Rapid synthesis of Au, Ag, and bimetallic Au core-Ag shell nanoparticles using Neem (Azadirachta indica) leaf broth

We report on the use of Neem (Azadirachta indica) leaf broth in the extracellular synthesis of pure metallic silver and gold nanoparticles and bimetallic Au/Ag nanoparticles. On treatment of aqueous solutions of silver nitrate and chloroauric acid with Neem leaf extract, the rapid formation of stable silver and gold nanoparticles at high concentrations is observed to occur. The silver and gold nanoparticles are polydisperse, with a large percentage of gold particles exhibiting an interesting flat, platelike morphology. Competitive reduction of Au3+ and Ag+ ions present simultaneously in solution during exposure to Neem leaf extract leads to the synthesis of bimetallic Au core-Ag shell nanoparticles in solution. Transmission electron microscopy revealed that the silver nanoparticles are adsorbed onto the gold nanoparticles, forming a core-shell structure. The rates of reduction of the metal ions by Neem leaf extract are much faster than those observed by us in our earlier studies using microorganisms such as fungi, highlighting the possibility that nanoparticle biological synthesis methodologies will achieve rates of synthesis comparable to those of chemical methods.     

Space-Selective Precipitation of Au Nanoparticles Inside Silica Gel

Au colloids were prepared by irradiation with a Nd:YAG laser. Au nanoparticles were characterized by absorption spectra, transmission electron microscopy (TEM) and X-ray diffraction (XRD) analysis. It is found that the wavelength of the laser has no effect on the size but the number of the Au nanoparticles. By irradiating a transparent silica gel doped with gold ions with the focused laser in the gel and subsequent exposing in air, a space-selective pattern of letter “P” consisting of Au nanoparticles was observed inside the silica gel.     

Comparison between measurements of elasticity and free amino group content of ovalbumin microcapsule membranes: discrimination of the cross-linking degree

Gold nanoparticle-doped poly(2-vinylpyridine) (P2VP) microcapsules and foam films were synthesized and assembled at the P2VP chloroform solution/HAuCl(4) aqueous solution interface at 25 °C. It was found that Au nanoparticles with the average diameter of 2.1 nm were homogeneously embedded in and adsorbed on the walls of the capsules and foams, the nanoparticles were composed of Au(0) and Au(III) with the molar ratio of about 75/25, and the mass percent of Au elements was measured to be 19.65%. The formation of the nanostructures was attributed to the self-assembly of P2VP at the liquid/liquid interface, the simultaneous reduction of AuCl(4)(-) ions by a small amount of ethanol in the chloroform and adsorption of AuCl(4)(-) ions. After irradiated by UV-light for 1h, the average diameter of the nanoparticles was found to be 2.2 nm, and the AuCl(4)(-) ions were transformed to Au(0) completely. The catalytic performance of these composite nanostructures were evaluated by using the reduction of 4-nitrophenol (4-NP) by potassium borohydride in aqueous solutions. The catalytic activity was very high in the first cycle, decreased rapidly and slightly in the second and third cycles, respectively, due to the aggregation of some nanoparticles, and stabilized after the third cycle.     

Reversible Synthesis of Sub‐10 nm Spherical and Icosahedral Gold Nanoparticles from a Covalent Au(CN)2− Precursor and Recycling of Cyanide to form Ferric Ferrocyanide for Cell Staining

A solution approach based on Au(CN)₂^? chemistry is reported for the formation of nanoparticles. The covalent character of the Au(CN)₂^? precursor was exploited in the formation of sub‐10 nm nanospheres (≈2.4 nm) and highly monodisperse icosahedral Au nanoparticles (≈8 nm) at room temperature in a one‐pot aqueous synthesis. The respective spherical and icosahedral Au morphologies can be controlled by either the absence or presence of the polymer polyvinylpyrrolidone (PVP). Using Au(CN)₂^? as a metal ion source, our findings suggest that the addition of citrate ions is necessary to enhance the particle formation rate as well as to generate a more homogeneous colloidal dispersion. Because of the presence of oxygen and the operation of a CN^? etching process associated with Au(CN)₂^? complex formation, an interesting reversible formation–dissolution process was observed, which allowed us to repeatedly prepare spherical and icosahedral Au nanoparticles. Time‐dependent TEM images and UV/Vis spectra were carefully acquired to study the reversibility of this formation–dissolution process. In view of the accompanying generation of toxic cyanide anions, we have developed a protocol to recycle cyanide in the presence of citrate ions through ferric ferrocyanide formation. After completion of particle formation, the residual solutions containing citrate ions and cyanide ions were processed to stain iron oxide nanoparticles endocytosized in cells. Additionally, the as‐prepared 8 nm Au icosahedra could be isolated and grown to larger 57 nm‐sized icosahedra using the seed‐mediated growth approach.     

Matter of age: growing anisotropic gold nanocrystals in organic media

We investigated the influence of the reduction state of gold ions on the growth of gold nanocrystals in N,N-dimethyl formamide (DMF). While freshly prepared solutions of AuCl3 produce spherical nanocrystals, aged precursor solutions containing mainly Au+ ions and Au(0) atoms lead to various branched nanoparticles. Furthermore, we show that also the amount of the reducing and stabilisation agent tetra-n-octylammonium formate (TOAF) plays a decisive role on the shape of the nanocrystals, allowing us to grow triangular and cubic nanoparticles.