An improved ion-selective electrode for perchlorate

A new liquid-membrane ion-selective electrode for perchlorate ion based on tetrakistri-phenylphosphine silver(I) perchlorate in nitrobenzene is described. Its dynamic range and selectivities relative to most common anions are comparable to those of the Orion model 92-81 perchlorate sensor. However, it suffers much less hydroxide-ion interference than the Orion product.     

Sodium ion-selective membrane electrode based on a new crown ether

A sodium ion-selective PVC membrane electrode based on di(o-methoxy)stilbenzo-24-crown-8 is reported. The electrode gives a near-Nernstian response in the range 9×10^?6–1×10^?2 M sodium ion and can be used in the pH range 5–8.5. Selectivity coefficients are 1.8×10^?1 (K⁺), 2.0×10^?4 (Li⁺) 2.5×10^?2 (NH⁺₄) and about 10^?4 for Mg²⁺, Ca²⁺ and Ba²⁺.     

Lower limits of the potentiometric titration of perchlorate using a perchlorate ion-selective electrode

Three titrants (tetraphenylarsonium chloride, tetraphenylphosphonium chloride, and tetra-n-pentylammonium bromide) were evaluated for the potentiometric determination of perchlorate. The emf levels were monitored with a perchlorate ion-selective indicator electrode and a double-junction reference electrode. The tetraphenylonium salts were equivalent, yielding the same precision and magnitude of potentiometric breaks. Considerably smaller breaks were obtained with tetra-n-pentylammonium bromide, which, therefore, is not recommended as titrant.The lower limits for the potentiometric titration of perchlorate at ambient temperature were extended to ~0.09 mmol per 50 ml (1.7 × 10^?3N) from the previous 0.25 mmol per 50 ml. If Gran plots are used, they can be further extended to ~0.01 mmol per 50 ml (2.1 × 10^?4N).     

低检出限聚合物膜镉离子选择性电极的研制及应用

基于痕量电位分析原理,研制出了一种新型的聚合物膜镉离子选择性电极.通过优化电极内充液组成及聚合物膜组分,电极在10-8～10-4mol/L镉浓度范围内呈现良好的能斯特响应,响应斜率为24.9 mV/dec.,检出限可达5.9nmol/L.该电极应用于实际湖水样品中镉含量的检测,结果与ICP-MS法数据较为吻合.     

Potentiometric flow injection system for determination of reductants using a polymeric membrane permanganate ion-selective electrode based on current-controlled reagent delivery

A polymeric membrane permanganate-selective electrode has been developed as a current-controlled reagent release system for potentiometric detection of reductants in flow injection analysis. By applying an external current, diffusion of permanganate ions across the polymeric membrane can be controlled precisely. The permanganate ions released at the sample-membrane interface from the inner filling solution of the electrode are consumed by reaction with a reductant in the sample solution thus changing the measured membrane potential, by which the reductant can be sensed potentiometrically. Ascorbate, dopamine and norepinephrine have been employed as the model reductants. Under the optimized conditions, the potential peak heights are proportional to the reductant concentrations in the ranges of 1.0×10(-5) to 2.5×10(-7)M for ascorbate, of 1.0×10(-5) to 5.0×10(-7)M for dopamine, and of 1.0×10(-5) to 5.0×10(-7)M for norepinephrine, respectively with the corresponding detection limits of 7.8×10(-8), 1.0×10(-7) and 1.0×10(-7)M. The proposed system has been successfully applied to the determination of reductants in pharmaceutical preparations and vegetables, and the results agree well with those of iodimetric analysis.     

Solvent polymeric membrane ion-selective electrodes

The significant role of poly(vinyl chloride) as a support polymer in solvent polymeric ion-selective electrodes is briefly reviewed. This lays emphasis on the way PVC has contributed to the relatively high state of development of conventional ion-selective electrodes, microelectrodes, coated-wire electrodes and ion-sensitive field effect transistors based on liquid ion-exchanger and neutral carrier ionophore sensors. Also discussed are possibilities of using alternative polymer matrices for overcoming some of the shortfalls of the PVC electrodes.     

Novel mercury (II) ion-selective polymeric membrane sensor based on ethyl-2-benzoyl-2-phenylcarbamoyl acetate

Mercury (II) ion-selective PVC membrane sensor based on ethyl-2-benzoyl-2-phenylcarbamoyl acetate (EBPCA) as a novel nitrogen containing sensing material is successfully developed. The sensor exhibits good linear response of 30 mV per decade within the concentration range 10(-6)-10(-3) mol l(-1) Hg(II). The sensor shows good selectivity for mercury (II) ion in comparison with alkali, alkaline earth, transition and heavy metal ions. The EBPCA-based sensor is suitable for use with aqueous solutions of pH 2.0-4.5 and exhibits minimal interference by Ag(I) and Fe(III), which are known to interfere with other previously suggested sensors. The nature and composition of the sensing material and its mercury complex are examined using Fourier-transform infrared analysis, elemental analysis and X-ray fluorescence techniques. The proposed sensor is applied as a sensor for the determination of Hg(II) content in some amalgam alloys. The results show good correlation with data obtained by atomic absorption spectrometric method.     

A chlorate ion-selective electrode based on a poly(vinyl chloride)-matrix membrane

An electrode has been prepared, consisting of a PVC membrane containing Corning 477316 nitrate liquid ion-exchanger in the chlorate form, which responds to chlorate ions. It has a faster response (1-2 sec) and lower limit of detection (3 x 10(-5)M) than the nitrate electrode for chlorate determination. Selectivity coefficients for the electrode towards several other ions have been measured.     

Preparation and properties of a carbonate ion-selective membrane electrode

A liquid membrane ion-selective electrode has been prepared for the measurement of carbonate ion activities in solutions containing high levels of hydrogen carbonate and chloride. The electrode exhibits Nernstian response in the approximate range 1O^-2–1O^-7M carbonate, and has a fast response and low noise level under most conditions. In the physiologically important pH region, hydroxide ion does not interfere. Detailed information is given on the composition and properties of the active membrane phase.     

Mercury(II) ion-selective polymeric membrane sensor based on a recently synthesized Schiff base

A new polyvinyl chloride (PVC) membrane electrode that is highly selective to Hg(II) ions was prepared by using bis[5-((4-nitrophenyl)azo salicylaldehyde)] (BNAS) as a suitable neutral carrier. The sensor exhibits a Nernstian response for mercury ions over a wide concentration range (5.0×10⁻²-7.0×10⁻⁷ M) with a slope of 30±1 mV per decade. It has a response time of <10 s and can be used for at least 3 months without any measurable divergence in potential. The electrode can be used in the pH range from 1.0 to 3.5. The proposed sensor shows fairly good discriminating ability towards Hg²⁺ ion in comparison with some hard and soft metals. The electrode was used in the direct determination of Hg²⁺ in aqueous solution and as an indicator electrode in potentiometric titration of mercury ions.     

Analytical study of a cadmium ion-selective ceramic membrane electrode

Summary A cadmium ion-selective membrane electrode has been developed by applying a hot-pressing method. The membrane contains cadmium sulphide, silver sulphide, and copper(I)-sulphide.The best response was obtained with a membrane containing less than 30% of copper(I) sulphide and more than 5% of cadmium sulphide. The Nernstian slope was secured over an activity range of 10^–1 to 10^–6 M, and potentiometric analysis could be carried out over a concentration range of 10^–1-10^–7 M. The potentials were maintained at constant values over more than 6 months. Also, the potentials satisfied the Nernst's factor 2.303 RT/2F at the temperature range between 0 and 95°C. Among the common ions, silver, copper(II), iron(III), mercury(II), sulphide, and iodide ions interfered seriously. However, about 10–100 times of lead and bromide ions and more than 1000 times of alkali metal, alkaline earth metal, zinc, aluminium, nickel, cobalt, manganese(II), perchlorate, and nitrate ions did not interfere at all.

---

Analytische Untersuchung einer cadmiumionenselektiven keramischen Membranelektrode

Zusammenfassung Die Membran wurde durch Pressen von Cd-, Ag und Cu(I)-sulfid bei 200–500°C und 3–7 t/cm² hergestellt. Die beste Ansprechempfindlichkeit ergab sich bei einem Gehalt von <30% Cu₂S und >5% CdS. Die Nernstsche Gleichung war gültig im Bereich von 10^–1–10^–6 M, der analytische Bereich war 10^–1–10^–7 M. Die Potentiale konnten mehr als 6 Monate auf einem konstanten Wert gehalten werden. Sie entsprachen dem Nernstschen Faktor, 2,303·R·T/2 F, im Temperaturbereich von 0–95°C. Erhebliche Störungen werden durch Ag⁺-, Cu²⁺-, Fe³⁺-, Hg²⁺-, S^2– und J^–-Ionen verursacht. Jedoch verursachen etwa 10–100fache Mengen von Pb²⁺- und Br^–-Ionen sowie mehr als 1000fache Mengen von Alkali-, Erdalkali-, Zn²⁺-, Al³⁺-, Ni²⁺-, Co²⁺-, Mn²⁺-, ClO₄ ^–- und NO₃ ^–-Ionen keine Störungen.

---

---

The authors thank Dr. S. Kisaka, Dr. K. Sugihara, Dr. S. Hayakawa and Dr. S. Mori for their encouragement in this work.     

Hydrogen ion-selective electrode based on an iron-hydroxo-complex

Summary A new hydrogen ion-selective based on an iron hydroxo complex was proposed. The ion sensing membrane was composed of the iron(III) hydroxo complex, membrane solvent and polyvinyl chloride. The proposed electrode using 1-decanol as the most favourable solvent showed a linear pH-response from 0 to 5 with a potential change of 56 mV per pH-unit. The characteristics of the proposed electrode and a discussion on the response mechanism are reported.

---

Wasserstoffionen-selektive Elektrode auf Basis eines Eisen-Hydroxo-Komplexes

Zusammenfassung Die Membran der vorgeschlagenen ionen-selektiven Elektrode besteht aus einem Eisen(III)-hydroxokomplex, dem Membran-Lösungsmittel und Polyvinylchlorid. Mit 1-Decanol als günstigstem Lösungsmittel ergab sich eine lineare Anzeige von pH 0 bis 5 mit einer Potentialänderung von 56 mV/pH. Die Charakteristik der vorgeschlagenen Elektrode wird beschrieben und der Ansprechmechanismus diskutiert.

     

Response mechanism of a neutral carrier Hg(II) polymeric membrane ion-selective electrode. SEM and EDAX study

Scanning electron microscopy (SEM) and energy dispersive atomic X-ray spectrometry (EDAX) were used to study the response mechanism of a previously reported new Hg membrane ion-selective electrode (ISE) based on 1,3-diphenylthiourea. These techniques allowed the study of the membrane surface characteristics, such as the morphological homogeneity and chemical composition. A 'twice Nernstian' response at pH > or = 7 was explained by the detection of the Hg(OH)+ cation. A normal Nernstian response was found at acidic pH values. Using these techniques, both coordination compounds, [Ligand-Hg-OH] at pH 7 and [Ligand-Hg-Ligand] at pH 4.5, were confirmed on the electrode membrane surface activated with Hg(NO3)2 solution at both pH values. These methods provide results which are independent of the potential measurement data and in agreement with them. A successful response model has explained both independent and unbiased sets of results. These conclusions confirm the proposed response mechanisms for this new Hg membrane sensor.     

Potentiometric studies on thioacetamide by means of a sulphide ion-selective membrane electrode

The sulphide ion-selective electrode has been found to be applicable to the determination of thioacetamide in the concentration range of 10^-1–10^-3 M by direct potentiometry and titration with silver nitrate. The effects of the acid and alkali content of the solutions on the titration reaction have been studied. In alkaline and slightly acidic solutions the product of the reaction is silver sulphide; in solutions in which the acid concentration exceeds 0.5 M, a precipitate of silver thioacetamide is formed. If the alkali concentration of the solution is lower than that corresponding to the amount of acid formed during the titration, another potential jump occurs before the end-point owing to the decrease of sulphide'concentration governed by hydrolysis.     

Potassium ion-selective electrode based on a cobalt(II)-hexacyanoferrate film-modified electrode

A potassium ion-selective electrode based on a cobalt(II)-hexacyanoferrate(III) (CHCF) film-modified glassy carbon electrode is proposed. The electroactive film is introduced onto the glassy carbon electrode surface by electrodeposition of cobalt, which forms a thin CHCF film on subsequent anodic scanning in KClHCl solution (pH 5.0–5.5) containing K₃Fe(CN)₆. The thickness of the film on the electrode surface can be controlled by changing the electrodeposition time and the concentrations of cobalt(II) and Fe(CN)^3?₆ ions. The modified electrode exhibits a linear response in the concentration range 1 × 10^?1 ?3 × 10^?5 M potassium ion activity, with a near-Nernstian slope (48–54 mV per decade) at 25 ± 1°C. The detection limit is 1 × 10^?5 M. The stability, response time and selectivity were investigated. The electrode exhibits good selectivity for potassium ion with the twelve cations investigated. The relative standard deviation is 1.5% (n=10). The effects of the thickness of the electroactive film and the pH of the solution on the electrode response were also investigated.     

Ytterbium-selective polymeric membrane electrode based on substituted urea and thiourea as a suitable carrier

Plasticized membranes using 1-phenyl-3-(2-thiazolyl)-2-thiourea (PTT) and 1-phenyl-3-(2-thiazolyl)-2-urea (PTU) have been prepared and explored as ytterbium ion-selective sensors. Effect of various plasticizers, viz. chloronaphthalene (CN), o-nitrophenyloctyl ether (o-NPOE), dibutylphthalate (DBP), dioctylsebacate (DOS) and anion excluders, sodium tetraphenylborate (NaTPB) and oleic acid (OA) was studied and improved membrane performance was observed. Optimum performance was noted with membrane of PTT having composition of PTT (3.5):PVC (80):DOS (160):NaTPB (1.5) in mg. The sensor works satisfactorily in the concentration range 1.2 × 10⁻⁷ to 1.0 × 10⁻² M (detection limit 5.5 × 10⁻⁸ M) with a Nernstian slope of 19.7 mV decade⁻¹ of activity. Wide pH range (3.0-8.0), fast response time (10 s), non-aqueous tolerance (up to 20%) and adequate shelf life (12 weeks) indicate the vital utility of the proposed sensor. The proposed electrode comparatively shows good selectivity for Yb³⁺ ion with respect to alkali, alkaline earth, transition and rare earth metals ions and can be used for its determination in binary mixtures and sulfite determination in white and red wine samples.     

Concanavalin A electrochemical sensor based on the surface blocking principle at an ion-selective polymeric membrane

Microchimica Acta - We report on a new electrochemical sensor for Concanavalin A. It is based on blocking the surface of plasticized PVC membranes that were covalently modified with D-mannose using...