Biodegradation of arsenosugars in marine sediment

In the marine environment, arsenic accumulates in seaweed and occurs mostly in the form of arsenoribofuranosides (often called arsenosugars). This study investigated the degradation pathways of arsenosugars from decaying seaweed in a mesocosm experiment. Brown seaweed (Laminaria digitata) was placed on top of a marine sediment soaked with seawater. Seawater and porewater samples from different depths were collected and analysed for arsenic species in order to identify the degradation products using high‐performance liquid chomatography–inductively coupled plasma mass spectrometry. During the first 10 days most of the arsenic found in the seawater and the shallow sediment is in the form of the arsenosugars released from the seaweed. Dimethylarsenoylethanol (DMAE), dimethylarsinic acid (DMA(V)) and, later, monomethylarsonic acid (MMA(V)) and arsenite and arsenate were also formed. In the deeper anaerobic sediment, the arsenosugars disappear more quickly and DMAE is the main metabolite with 60–80% of the total arsenic for the first 60 days besides a constant DMA(V) contribution of 10–20% of total soluble arsenic. With the degradation of the soluble DMAE the solubility of arsenic decreases in the sediment. The final soluble degradation products (after 106 days) were arsenite, arsenate, MMA(V) and DMA(V). No arsenobetaine or arsenocholine were identified in the porewater. Copyright © 2005 John Wiley & Sons, Ltd.     

Complementary chromatography separation combined with hydride generation-inductively coupled plasma mass spectrometry for arsenic speciation in human urine

This study aimed to establish complementary high performance liquid chromatography (HPLC) methods including three modes of separation: ion pairing, cation exchange, and anion exchange chromatography, with detection by inductively coupled plasma mass spectrometry (ICPMS). The ion pairing mode enabled the separation of inorganic arsenate (As(V)), monomethylarsonic acid (MMA(V)), and dimethylarsinic acid (DMA(V)). However, the ion pair mode was unable to differentiate inorganic arsenite (As(III)) from arsenobetaine (AsB); instead, cation exchange chromatography was used to isolate and quantify AsB. Anion exchange chromatography was able to speciate all of the aforementioned arsenic species. Potential inaccurate quantification problem with urine sample containing elevated concentration of AsB, which eluted immediately after As(III) in anion exchange or ion pairing mode, was overcame by introducing a post-column hydride generation (HG) derivatization step. Incorporating HG between HPLC and ICPMS improved sensitivity and specificity by differentiating AsB from hydride-forming arsenic species. This paper emphasizes the usefulness of complementary chromatographic separations in combination with HG-ICPMS to quantitatively determine concentrations of As(III), DMA(V), MMA(V), As(V), and AsB in the sub-microgram per liter range in human urine.     

Identification of arsenic species in sheep‐wool extracts by different chromatographic methods

Sheep on the island of North Ronaldsay (Orkney, UK) feed mostly on seaweed, which contains high concentrations of dimethylated arsenoribosides. Wool of these sheep contains dimethylated, monomethylated and inorganic arsenic, in addition to unidentified arsenic species in unbound and complexed form. Chromatographic techniques using different separation mechanisms and detectors enabled us to identify five arsenic species in water extracts of wool. The wool contained 5.2 ± 2.3 µg arsenic per gram wool. About 80% of the arsenic in wool was extracted by boiling the wool with water. The main species is dimethylarsenic, which accounted for about 75 to 85%, monomethylated arsenic at about 5% and the rest is inorganic arsenic. Depending on the separation method and condition, the chromatographic recovery of arsenic species was between 45% for the anion exchange column, 68% for the size exclusion chromatography (SEC) and 82% for the cation exchange column. The SEC revealed the occurrence of two unknown arsenic compounds, of which one was probably a high molecular mass species. Since chromatographic recovery can be improved by either treating the extract with CuCl/HCl (CAT: 90%) or longer storage of the sample (CAT: 105%), in particular for methylated arsenic species, it can be assumed that labile arsenic–protein‐like coordination species occur in the extract, which cannot be speciated with conventional chromatographic methods. It is clear from our study of sheep wool that there can be different kinds of ‘hidden’ arsenic in biological matrices, depending on the extraction, separation and detection methods used. Hidden species can be defined as species that are not recordable by the detection system, not extractable or do not elute from chromatographic columns. Copyright © 2003 John Wiley & Sons, Ltd.     

Analysis of arsenic compounds by capillary electrophoresis using indirect UV and mass spectrometric detections

CE with indirect UV and mass-spectrometric detection was used for the simultaneous determination of arsenic acid (As(V)), arsenous acid (As(III)), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), trimethylarsine oxide (TMAO), tetramethylarsonium ion (TMA(+)), arsenobetaine (AB), and arsenocholine (AC). In the CE-indirect UV analysis, a baseline separation of arsenic species was successfully achieved by using a basic background solution (BGS) for anions and an acidic BGS for cations, respectively. The LOD values in CE-indirect UV for the individual analytes were 7.8, 12.5, 7.8, 12.5, 62.5, 125, 250, and 62.5 ppm, respectively. To achieve sensitive and selective analysis, CE coupled with ESI-MS was applied to the determination of arsenic compounds. The organic arsenic species were successfully separated with a higher sensitivity by CE-MS using the acidic BGS. The LODs in CE-MS for MMA, DMA, TMAO, TMA(+), AB, and AC were 1.0, 0.1, 0.01, 0.1, 0.01, and 0.01 ppm, respectively. In contrast, the analysis of inorganic arsenic species (As(V) and As(III)) resulted in a lower detectability in CE-MS compared to that obtained with the CE-indirect UV analysis. However, the speciation of eight arsenics by CE-MS was successfully achieved in a single run by switching the ESI polarity during MS detection.     

液相色谱-双通道原子荧光检测联用法同时测定砷和硒的形态

建立了一种利用高效液相色谱-双通道原子荧光检测联用同时进行砷和硒形态分析的方法。以10 mmol/L NH4H2PO4溶液(pH 5.6)(添加2.5%(体积分数)的甲醇)为流动相,在12 min内同时分离了三价砷(As(III))、一甲基砷(MMA)、二甲基砷(DMA)、五价砷(As(V))、硒代胱氨酸(SeCys)、硒代蛋氨酸(SeMet)和四价硒［Se(IV)］等化合物。As(III)、DMA、MMA、As(V)、SeCys、SeMet和Se(IV)的检出限分别为1,3,2,3,4,18和3 μg/L (进样量为200 μL),5次测定的相对标准偏差为1.9%～6.1%(As 100 μg/L, Se 300 μg/L)。应用该方法对人体尿样及硒酵母片中砷和硒的形态进行了分析,目标物在尿样中的加标回收率为83%～108%,在硒酵母片中的加标回收率为88%～105%。实验结果表明,该方法可用于尿样及药品中砷和硒形态的日常分析。该方法减少了样品的分析时间和试剂用量,降低了工作强度,提高了工作效率。     

A new hydride generation system applied in determination of arsenic species with ion chromatography-hydride generation-atomic fluorescence spectrometry (IC-HG-AFS)

A novel procedure was developed for the determination of arsenite (As(III)), arsenate (As(V)), monomethylarsonic (MMA) and dimethylarsinic acid (DMA) with ion chromatography-hydride generation-atomic fluorescence spectrometry (IC-HG-AFS) by employing a new gas-liquid separator (GLS). The effective separation of the four arsenic species was achieved in about 12 min. With a sample loading volume of 20 μl, the measurable minimum for As(III), DMA, MMA and As(V) were 0.02, 0.045, 0.043 and 0.166 ng, respectively, along with relative standard deviations of 1.1, 1.1, 1.7 and 2.2% at the 100 μg l⁻¹ level (n = 6) for As(III), DMA, MMA and As(V), respectively. The present procedure was applied for the speciation of arsenic in underground water and in urine samples, and the sum of the four arsenic species by IC-HG-AFS was in good agreement with the total value by HG-AFS.     

A systematic study on extraction of total arsenic from down-scaled sample sizes of plant tissues and implications for arsenic species analysis

An easily feasible, species-conserving and inexpensive protocol for the extraction of total arsenic and arsenic species from terrestrial plants was designed and applied to the investigation of accumulation and metabolization of arsenite (As(III)), arsenate (As(V)), monomethylarsonate (MMA(V)), and dimethylarsinate (DMA(V)) by the model plant Tropaeolum majus. In contrast to existing extraction methods hazardous additives and elaborate procedures to enhance the extraction yields were omitted. The proposed protocol is suited to down-scale the sample sizes used for the extractions and to promote a compartmentally resolved analysis of the arsenic distribution within individual leaves, leaf stalks, and stems instead of the conventional extraction of pooled samples. In a two-step extraction, the high extraction efficiencies (85-92%) for arsenic achieved by phosphate buffer from larger amounts (200mg) of homogenized leaf material in a one-step extraction, could be enhanced to 94-100% in a second extraction step. A strong dependence of the arsenic extractability on the type of arsenic species accumulated in the tissue as well as on the type of the tissue (leaf, leaf stalk, stem) was found. For the extraction of 5mm long segments cut from individual leaves without previous homogenization of the plant parts yields between 75 and 93% depending on arsenic species prevailing in the cells were obtained using 1 or 10mM phosphate buffer. The total extraction and analysis protocol was validated using a standard reference material as well as by spiking experiments. The arsenic species analysis by IC/ICPMS revealed a number of nine unidentified metabolites in the plant extracts in addition to the species MMA(V), DMA(V), As(III), and As(V) that were provided to the plants during their growth phase.     

Determination of arsenic species by capillary zone electrophoresis with large-volume field-amplified stacking injection.

Determination of arsenic species by large-volume field amplified stacking injection-capillary zone electrophoresis (LV-FASI-CZE) is reported in this paper. Whole column injection was employed. The optimum buffer pH for the separation of weak acids was discussed. It was found that the optimum buffer to analyze the stacked arsenate (As(V)), monomethylarsonate (MMA), and dimethylarsinate (DMA) was 25 mM phosphate at pH 6.5. However, the optimum buffer to analyze the concentrated arsenite (As(III)) was 20 mM phosphate - 10 mM borate at pH 9.28. The limits of detection of the method developed were 0.026 mg/L for As(III), 0.023 mg/L for As(V), 0.043 mg/L for MMA, and 0.018 mg/L for DMA. An enrichment factor of 34-100 for several arsenic species was obtained. In the end, this method was applied to determine the arsenic concentration in the environmental reference materials to show the usefulness of the method developed.     

CZE for the speciation of arsenic in aqueous soil extracts

We developed two separation methods using CZE with UV detection for the determination of the most common inorganic and methylated arsenic species and some phenylarsenic compounds. Based on the separation method for anions using hydrodynamic sample injection the detection limits were 0.52, 0.25, 0.27, 0.12, 0.37, 0.6, 0.6, 1.2 and 1.0 mg As/L for phenylarsine oxide (PAO), p-aminophenylarsonic acid (p-APAA), o-aminophenylarsonic (o-APAA), phenylarsonic acid (PAA), 4-hydroxy-3-nitrobenzenearsonic acid (roxarsone), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenite or arsenious acid (As(III)) and arsenate (As(V)), respectively. These detection limits were improved by large-volume sample stacking with polarity switching to 32, 28, 14, 42, 22, 27, 26 and 27 microg As/L for p-APAA, o-APAA, PAA, roxarsone, MMA, DMA, As(III) and As(V), respectively. We have applied both methods to the analysis of the arsenic species distribution in aqueous soil extracts. The identification of the arsenic species was validated by means of both standard addition and comparison with standard UV spectra. The comparison of the arsenic species concentrations in the extracts determined by CZE with the total arsenic concentrations measured by inductively coupled plasma-atomic emission spectroscopy (ICP-AES) indicated that CZE is suited for the speciation of arsenic in environmental samples with a high arsenic content. The extraction yield of phenylarsenic compounds from soil was derived from the arsenic concentrations of the aqueous soil extracts and the total arsenic content of the soil determined by ICP-AES after microwave digestion. We found that 6-32% of the total amount of arsenic in the soil was extractable by a one-step extraction with water in dependence on the type of arsenic species.     

Speciation of Arsenic in Rice by High-Performance Liquid Chromatography–Hydride Generation-Atomic Fluorescence Spectrometry with Microwave-Assisted Extraction

Arsenic speciation in paddy rice is of considerable interest due to its impact on the food safety and human health. In this study, a simple methodology was developed to simultaneously extract and analyze As species in rice from China. Arsenic species, including arsenite (As(III)), arsenate (As(V)), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA), were extracted by methanol-water (50:50, v/v) containing 0.02 mol L^?1 nitric acid with a microwave-assisted procedure, and then determined by high performance liquid chromatography–hydride generation-atomic fluorescence spectrometry (HPLC–HG-AFS). The results showed that the method has good efficiency (>90%) for rice, indicating that there were no significant losses or transformations of arsenic during sample treatment and analysis. The limits of quantification (LOQ) of the method were 8.0, 20, 12, and 12 ng g^?1 for As(III), As(V), DMA, and MMA, respectively. When this method was applied to the analysis of rice, As(III) had the highest concentration, followed by DMA, As(V), and MMA. The estimated weekly intake of inorganic As from rice by Chinese people accounted for 11.83% of the provisional tolerable weekly intake. The As speciation results in this study suggest that the risk associated with As in rice to human health may be negligible.     

New Approaches to the Extraction of Arsenic Species from Soils

Arsenic extraction in natural and spiked soil samples was studied using two main types of extractants. The extractants were phosphoric acid used alone and with the addition of reducing agents (ascorbic acid and hydroxylammonium hydrochloride). The stability of arsenite (As(III)), arsenate (As(V)), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) in the extracts over time and under different storing conditions was assessed by means of LC-HG-AFS. A protocol was devised to extract arsenic species from soils. The protocol assures the stability of the original sample species in the extract proposed by using an extraction solution of phosphoric acid with ascorbic acid and by purging the extracts after microwave extraction. The total As, Mn and Fe content in aqua regia and in phosphoric extracts was also measured by ICP-AES in order to perform the mass balance.     

Determination of arsenic compounds in beverages by high-performance liquid chromatography-inductively coupled plasma mass spectrometry

Arsenic compounds including arsenous acid (As(III)), arsenic acid (As(V)), dimethylarsinic acid (DMA) and monomethylarsonic acid (MMA) were separated by high-performance liquid chromatography (HPLC) and detected by inductively coupled plasma mass spectrometry (ICP-MS). A Hamilton PRX-100 anionic-exchange column and a pH 8.5 K₂HPO₄/KH₂PO₄ 5.0 × 10⁻³ mol L⁻¹ mobile phase were used to achieve arsenic speciation. The separation of arsenic species provided peaks of As(III) at 2.75 min, DMA at 3.33 min, MMA at 5.17 min and As(V) at 12.5 min. The detection limits, defined as three times the standard deviation of the lowest standard measurements, were found to be 0.2, 0.2, 0.3 and 0.5 ng mL⁻¹ for As(III), DMA, MMA and As(V), respectively. The relative standard deviation values for a solution containing 5.0 μg L⁻¹ of As(III), DMA, MMA and As(V) were 1.2, 2.1, 2.5 and 3.0%, respectively. This analytical procedure was applied to the speciation of arsenic compounds in drinking (soft drink, beer, juice) samples. The validation of the procedure was achieved through the analysis of arsenic compounds in water and sediment certified reference materials.     

Determination of lipid‐soluble arsenic species in seaweed‐eating sheep from Orkney

This work is part of an ongoing research study towards an understanding of the complete metabolism of arsenosugars in mammalian organisms when ingesting seaweed, using the North Ronaldsay (NR) sheep as a model organism. We focus on the analysis of only those arsenic species bound to the lipids of the feed (Laminaria digitata), faeces and the tissues of the NR sheep using a novel enzymatic hydrolytic method that is simple and reliable. This rare breed of sheep, found in the remote Orkney Islands in the north of Scotland, live the entire year on the beaches and eat seaweed that is washed ashore (up to 3 kg daily). Previous studies on arsenic fractionation in muscle, kidney and liver tissues revealed that most of the arsenic is concentrated in the fat fractions of these tissues (muscle fat: 61%; liver fat: 66%; kidney fat: 25%) rather than in the non‐lipid fractions. Hence, this study was undertaken in order to determine the arsenic species bound to lipids in the muscle, kidney and faeces of NR sheep and to compare these with the arsenic species bound to the lipids of the L. digitata consumed. The enzymatic hydrolytic procedure has been successfully employed for the first time to cleave the arsenic species cleanly from the rest of the lipid structure. This makes the arsenic species water soluble and enables their direct determination by high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry. Dimethylarsinic acid (DMA(V)) and monomethylarsonic acid (MA(V)) were found to be the major hydrolysed arsenic species bound to the kidney and muscle lipids, whereas arsenosugar‐1 was found to be the major hydrolysed arsenic species in L. digitata lipids. On the other hand, DMA(V) was found to be the major arsenical obtained after the enzymatic hydrolysis of the faeces lipids. These results seem to suggest that both direct absorption and biotransformation of the absorbed organoarsenicals are the likely reasons for their occurrence and accumulation in the NR sheep tissues. Copyright © 2003 John Wiley & Sons, Ltd.     

Study of interactions between arsenicals and thioredoxins (human and E. coli) using mass spectrometry

Thioredoxin (Trx) plays an important role in achieving redox balances in cells and protecting the cells from oxidative damage. However, little is known about how arsenic affects Trx chemically. It is conceivable that trivalent arsenicals may bind to Trx, which has a highly conserved -CysGlyProCys- sequence. The objective of this study is to characterize the binding of seven arsenic species with Trx from E. coli and humans, using two mass spectrometry techniques. The arsenic-Trx complexes and the free arsenicals were well separated by size-exclusion liquid chromatography (LC) and detected with inductively coupled plasma mass spectrometry (ICPMS). The LC/ICPMS analyses showed that the trivalent arsenic species were able to form complexes with both human and E. coli Trx. Determination of binding constants indicated that affinity to Trx was higher for monomethylarsonous acid (MMA(III)) and phenylarsine oxide (PhAs(III)) than inorganic arsenite (iAs(III)) and dimethylarsinous acid (DMA(III)), probably because MMA(III) and PhAs(III) were able to form stable complexes by binding to two vicinal cysteines in the -CysGlyProCys- region of the Trx. The complexes of arsenicals with both human and E. coli Trx were further characterized by nano-electrospray tandem mass spectrometry. Binding stoichiometries for different arsenic species were consistent with the available cysteine residues in the Trx. Mass spectral evidence also suggests that the pentavalent arsenicals could be reduced by Trx. This study provides the first detailed chemical characterization of the interactions between Trx and arsenic species.     

Arsenic metabolism in seaweed-eating sheep from Northern Scotland

Cation exchange and anion exchange liquid chromatography were coupled to an ICP-MS and optimised for the separation of 13 different arsenic species in body fluids (arsenite, arsenate, dimethylarsinic acid (DMAA), monomethylarsonic acid (MMAA), trimethylarsine oxide (TMAO), tetramethylarsonium ion (TMA), arsenobetaine (AsB), arsenocholine (AsC), dimethylarsinoyl ethanol (DMAE) and four common dimethylarsinoylribosides (arsenosugars). The arsenic species were determined in seaweed extracts and in the urine and blood serum of seaweed-eating sheep from Northern Scotland. The sheep eat 2-4 kg of seaweed daily which is washed ashore on the most northern Island of Orkney. The urine, blood and wool of 20 North Ronaldsay sheep and kidney, liver and muscle from 11 sheep were sampled and analysed for their arsenic species. In addition five Dorset Finn sheep, which lived entirely on grass, were used as a control group. The sheep have a body burden of approximately 45-90 mg arsenic daily. Since the metabolism of arsenic species varies with the arsenite and arsenate being the most toxic, and organoarsenic compounds such as arsenobetaine the least toxic compounds, the determination of the arsenic species in the diet and their body fluids are important. The major arsenic species in their diet are arsenoribosides. The major metabolite excreted into urine and blood is DMAA (95 +/- 4.1%) with minor amounts of MMAA, riboside X, TMA and an unidentified species. The occurrence of MMAA is assumed to be a precursor of the exposure to inorganic arsenic, since demethylation of dimethylated or trimethylated organoarsenic compounds is not known (max. MMAA concentration 259 microg/L). The concentrations in the urine (3179 +/- 2667 microg/L) and blood (44 +/- 19 microg/kg) are at least two orders of magnitude higher than the level of arsenic in the urine of the control sheep or literature levels of blood for the unexposed sheep. The tissue samples (liver: 292 +/- 99 microg/kg, kidney: 565 +/- 193 microg/kg, muscle: 680 +/- 224 microg/kg) and wool samples (10470 +/- 5690 microg/kg) show elevated levels which are also 100 times higher than the levels for the unexposed sheep.     

Arsenic speciation in Chinese brake fern by ion-pair high-performance liquid chromatography-inductively coupled plasma mass spectroscopy

Ion-pair reverse-phase HPLC-inductively coupled plasma (ICP) MS was employed to determine arsenite [As(III)], dimethyl arsenic acid (DMA), monomethyl arsenic (MMA) and arsenate [As(V)] in Chinese brake fern (Pteris vittata L.). The separation was performed on a reverse-phase C18 column (Haisil 100) by using a mobile phase containing 10 mM hexadecyltrimethyl ammonium bromide (CTAB) as ion-pairing reagent, 20 mM ammonium phosphate buffer and 2% methanol at pH 6.0. The detection limits of arsenic species with HPLC-ICP-MS were 0.5, 0.4, 0.3 and 1.8 ppb of arsenic for As(III), DMA, MMA, and As(V), respectively. MMA has been shown for the first time to experimentally convert to DMA in the Chinese brake fern, indicating that Chinese brake fern can convert MMA to DMA by methylation.     

Arsenic speciation by ion-exchange separation and graphite-furnace atomic-absorption spectrophotometry

As(III), As(V), monomethylarsenic acid (MMA) and dimethylarsenic acid (DMA) were determined by graphite-furnace atomic-absorption spectrophotometry after separation of the species by ion-exchange chromatography. The detection limits (ng/ml) were DMA 0.02, MMA 2.0, As(V) 0.4 and total arsenic 4.0. As(III) was determined by difference. This system gave better detection limits and/or shorter analysis times than previously reported systems.     

Excretion patterns of arsenic and its metabolites in human saliva and urine after ingestion of Chinese seaweed

There are no reports in scientific literature on arsenic species in human saliva after seaweed exposure. The present article reports for the first time the regular excretion patterns of arsenic in the saliva of volunteers with one-time ingestion of Chinese seaweed. Total arsenic and speciation analyses were carried out by high-performance liquid chromatography–inductively coupled plasma–mass spectrometry (HPLC-ICP-MS). Results show that the excretion time of total arsenic in saliva is a trifle earlier than that in urine, total arsenic in human saliva also shows a regular excretion pattern like that in urine within 72 h after exposure to seaweed. For speciation analysis, four species, including the major dimethylarsinic acid (DMA) species, were detected in urine prior to seaweed intake. Six species were detected in urine after seaweed ingestion, including DMA, methylarsonic acid (MMA), oxo-dimethylarsinoylethanol (oxo-DMAE), thio-dimethlyarsenoacetate (thio-DMAA), arsenite (As^III) and arsenate (As^V). In saliva samples, three species were found before seaweed ingestion, with the major peak identified as As^III. After consumption, the kinds of arsenic metabolites in saliva were less than those in urine. The major species was inorganic arsenic (iAs As^III+As^V), followed by DMA, MMA and a trace amount of oxo-DMAE. Taken together, the present study suggests that saliva assay can be used as a potential tool for understanding the regular excretion pattern of total arsenic after seaweed ingestion. Whether or not it’s an efficient tool for assessing arsenic metabolites in humans exposed to seaweed requires further investigation.     

Urinary arsenic species in an arsenic‐affected area of West Bengal,India (part III)

Arsenic contamination of groundwater has long been reported in the Mushidabad district of West Bengal, India. We visited 13 arsenic‐affected families in the Makrampur village of the Beldanga block in Mushidabad during 18–21 December 2001 and collected five shallow tubewell‐water samples used general household purposes, four deep tubewell‐water samples used for drinking and cooking purposes, and 44 urine samples from those families. The arsenic concentrations in the five shallow tubewell‐water samples ranged from 18.0 to 408.4 ppb and those in the four deep tubewell‐water samples were from 5.2 to 9.6 ppb. The average arsenite (arsenic(III)), dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and arsenate (arsenic(V)) in urine were 28.7 ng mg^?1, 168.6 ng mg^?1, 25.0 ng mg^?1 and 4.6 ng mg^?1 creatinine respectively. The average total arsenic was 227.0 ng mg^?1 creatinine. On comparison of the ratio of (MMA + DMA) to total arsenic, the average proportion was 86.7 ± 9.2% (mean plus/minus to residual standard deviation, n = 43). The exception was data for one boy, whose proportion was 8.0%. One woman excreted the highest total arsenic, at 2890.0 ng mg^?1 creatinine. When using 43 of the urine samples (the exception being the one sample obtained from the boy) there were significantly positive correlations (p < 0.01) between arsenic(III) and MMA, between arsenic(III) and DMA and between MMA and DMA. Copyright © 2005 John Wiley & Sons, Ltd.     

Extraction of arsenic species from airborne particulate filters—Application to an industrial area of Greece

In the present study, the extraction of the arsenic species arsenite (As(III)), arsenate (As(V)), monomethyarsonic (MMA) and dimethylarsinic acid (DMA) from airborne particulate filters was investigated and optimized. For this purpose, total suspended particulate matter as well as size fractionated aerosol samples were collected from the industrial area of Aspropyrgos, Greece, in glass fibre and polycarbonated filters, respectively. Among H₃PO₄ and HCl, tested in various concentrations, concentrated HCl was found to be the most effective extractant for arsenic from both polycarbonated and glass fibre filters, without provoking any arsenic species transformation. However, the quantitative extraction of arsenic species from glass fibre filters required the subsequent washing of the filters with ultrapure water after their leaching with concentrated HCl. The developed procedure was applied to airborne particulate filters for arsenic speciation in Aspropyrgos' atmosphere. The results showed an enrichment of As in the fine (PM_2.5) compared with the coarse (PM_10–2.5) fraction of airborne particulates, while As(V) was found to be the predominant arsenic species in all samples. Finally, As concentration in the PM₁₀ fraction, for the investigated area and time period from December 2004 to June 2006, was below the target value of 6 ng As m^− 3, referred in the Directive 2004/107 of European Union.