Synergic extraction and spectrophotometric determination of titanium(IV)

A method has been developed for the synergic extraction and spectrophotometric determination of Ti(IV) with N-hydroxy-NN'-diphenylbenzamidine and thiocyanate. The yellow ternary complex, extracted into chloroform from dilute sulphuric acid medium (pH = 1.5+/-0.1), has maximum absorbance at 390 nm (molar absorptivity 1.3 x 1O(4) 1.mole(-1). cm(-1)). The method is free from interference from a large number of foreign ions and is recommended for the determination of titanium in steel.     

Extraction and spectrophotometric determination of titanium(IV) with malachite green and p-chloromandelic acid, with application to mild steels

A very sensitive, selective and simple method for extraction and spectrophotometric determination of titanium(IV) with an alpha-hydroxy acid has been developed. p-Chloromandelic acid reacts with titanium in weakly acidic aqueous solution at room temperature to form a complex anion extractable into chlorobenzene with Malachite Green as counter-ion. Titanium is determined indirectly by measuring the absorbance of Malachite Green in the extract at 630 nm. The calibration graph is linear for titanium(IV) over the range 0.25-7.5muM (0.05-1.44 mug); the apparent molar absorptivity is 1.31 x 10(5) l.mole(-1).cm(-1). The method has been successfully applied to the determination of titanium in mild steels.     

Rapid spectrophotometric method (aqueous and extractive) for the determination of titanium in silicate rocks

A sensitive and highly selective aqueous as well as extractive spectrophotometric method has been developed for the determination of titanium(IV) using 2,3-dihydroxynaphthalene (H(2)ND) as a chromogenic agent. The reagent (H(2)ND) forms a 1:3 (TiOH(3+):ligand) complex at pH 4-9. The molar absorptivity and Sandell's sensitivity are 3.2 x 10(4) l . mol(-1)mol . cm(-1) and 0.001 microg/cm(2), respectively at lambda(max) 375 nm. The method has been found highly selective for Ti(IV) determination in rock samples. Solvent extraction of Ti(IV) in ethylacetate greatly improves the detection limit of the method. The method has been successfully applied to diverse silicate rock samples and results obtained are favourably comparable with those obtained from the tiron method. The reagent (H(2)ND) used in the present investigation is a much better variant than tiron for titanium(IV) determination in silicate rock samples in terms of sensitivity, selectivity, operational simplicity and economy.     

Mesostructured tin oxide as sensitive material for C(2)H(5)OH sensor

A solvent extraction, separation, preconcentration method and recovery of tantalum is reported. Tantalum is extracted with dibenzo-18-crown-6 (DB18C6) in dichloromethane in presence of niobium from 4 M hydrochloric acid. The transport of tantalum(V) ions through a supported liquid membrane containing DB18C6 has been studied. The influence of molarity of acid, carrier concentration, temperature and kinetics of transport is discussed. Tantalum-DB18C6 extract was directly inserted in the plasma for ICP-AES measurement which enhances the sensitivity to 20-folds with the detection limit 1 ng. The mixed compelxes of tantalum-DB18C6 with methyl violet and thiocyanate have also been studied. Tantalum was recovered from tin scrap and determined in standard and sea water samples.     

Extractive-spectrophotometric determination of molybdenum as mixed-ligand complexes with thiocyanate and amidopyridines

A fairly selective and sensitive method is described for the determination of microgram amounts of molybdenum(V) by means of its reaction with thiocyanate and the enolic form of various amidopyridines and extraction into benzene. The molar absorptivity of the complexes is in the range 1.5-1.9 x 10(4) l.mole(-1).cm(-1) at lambda(max) 470 nm. The method is applicable in 1.5-7M hydrochloric acid or 1.2-6(M) sulphuric acid media. Cu(+), Co(2+), Mn(2+), Zn(2+), Ni(2+), Cd(2+), Fe(3+), Al(3+), Cr(3+), Ti(4+), Zr(4+), V(V), Nb(5+), Ta(5+), W(VI) and U(VI) do not interfere.     

Study of the titanium-phenylfluorone complex formed in the presence of Triton X-305 and emulsifier OP

A highly sensitive method for the spectrophotometric determination of titanium with phenylfluorone (PF) in the presence of Triton X-305 and emulsifier OP has been developed. In acid medium (pH 1.4-2.2) Ti(IV) forms red-violet complexes with PF, Triton X-305 and OP. The complex exhibits maximum absorption at 540 nm. The molar absorptivity is 1.63 x 10(5) 1.mole(-1).cm(-1). The Ti:PF ratio in the complex is 1:2. Beer's law is obeyed in the titanium concentration range 0-0.2 microg/ml in the final solution. Fluoride and EDTA interfere. The method has been used for the rapid direct determination of microamounts of Ti(IV) in soils and cereals with satisfactory results.     

Extraction-spectrophotometric determination of germanium(IV) with mandelic acid and malachite green

A method has been developed for determination of germanium, based on complexation with mandelic acid and extraction of the ion-associate formed with Malachite Green (MG) into chlorobenzene. A weakly acidic aqueous solution (pH 2.5-3.5) at room temperature is used and indirect determination is achieved by measuring the absorbance of MG in the extract, at 628 mn. The calibration graph is linear over the range (0.17-8.63) x 10(-6) (0.05-2.50 mug of germanium); the apparent molar absorptivity is 1.33 x 10(5) 1.mole(-1).cm(-1). The interferences from Fe, Ti, Sn(IV), Mo, and SB(III) can be eliminated by addition of trans-1,2-diaminocyclohexanetetra-acetic acid and sodium diethyldithiocarbamate.     

Rapid, selective, direct and derivative spectrophotometric determination of titanium with 2,4-dihydroxybenzaldehyde isonicotinoyl hydrazone

A simple and sensitive spectrophotometric method is developed for the determination of titanium in aqueous medium. The metal ion forms a reddish brown coloured complex with 2,4-dihydroxybenzaldehyde isonicotinoyl hydrazone (2,4-DHBINH) in the pH range 1-7. The complex shows two absorption maxima, one at 430 nm and the other at 500 nm. The reagent shows appreciable absorbance of 430 nm and negligible absorbance at 500 nm at pH 1.5. Beer's law is obeyed in the range 0.09 to 2.15 mug ml(-1) of titanium(IV). The molar absorptivity and the Sandell's sensitivity of the method are 1.35 x 10(4) 1 mol(-1) cm(-1) and 0.0049 mug cm(-2), respectively. A method for the determination of titanium by first-order derivative spectrophotometry is also proposed. The methods have been employed successfully for the determination of titanium in several alloy and steel samples.     

Syntheses of cis- and trans-dibenzo-30-crown-10 derivatives via regioselective routes and their complexations with paraquat and diquat

cis-Dibenzo-30-crown-10 (cis-DB30C10) diester and trans-dibenzo-30-crown-10 (trans-DB30C10) diester were synthesized regioselectively with reasonable yields. These two isomers were further reduced to cis-dibenzo-30-crown-10 diol (1) and trans-DB30C10 diol (2), respectively. The complexations of cis- and trans-DB30C10 diols with paraquat (3) and diquat (4) were investigated by (1)H NMR, mass spectrometry, UV-vis spectroscopy, and single-crystal X-ray analysis. The reversible control of complexations of 1 x 3 and 2 x 3 by adding small molecules (KPF 6 and dibenzo-18-crown-6) was demonstrated by (1)H NMR. The addition of 2 molar equiv of KPF 6 is enough to dissociate 2 x 3 and 1 x 3 completely while the subsequent addition of 2 molar equiv of DB18C6 allows the two complexes to reform. However, 2 molar equiv of KPF6 cannot dissociate 1 x 4 and 2 x 4 completely. Because the DB30C10 cavity has a better geometry fit with paraquat 3 than with diquat 4, 4-based complexes have much higher association constants than the corresponding 3-based complexes. In the crystal structure of 1 x 4, the two hydroxymethyl groups of the crown ether 1 were joined by a "water bridge" to form a "supramolecular cryptand" while this kind of supramolecular cryptand structure was not observed in the crystal structure of 2 x 4. This is a possible reason for the increase in association constant from 2 x 4 (3.3 x 10(4) M(-1)) to 1 x 4 (5.0 x 10(4) M(-1)).     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.     

Extraction and spectrophotometric determination of titanium(IV) with alizarin and fluoride

The characteristics of the mixed-ligand titanium(IV)-fluoride-alizarin complex, including the optimum conditions of formation and extraction into methyl isobutyl ketone, are described. A simple and sensitive procedure for spectrophotometric determination of titanium has been developed. At pH 9.5-10.3 titanium reacts with alizarin in the presence of fluoride to form a red-violet complex that is completely extractable into methyl isobutyl ketone, and has its absorption maximum at 513 nm. The molar absorptivity at 513 nm is 7.0 x 10(4)l.mole(-1).cm(-1). Beer's law is obeyed up to 22 mug of titanium in 30 ml of solution. The method has been used for the determination of titanium in an oxide mixture and aluminium alloy samples.     

Spectral characterization of a newly synthesized fluorescent semicarbazone derivative and its usage as a selective fiber optic sensor for copper(II)

In this work photoluminescent properties of highly Cu(2+) selective organic fluoroionophore, semicarbazone derivative; bis(naphtho[2,1-b]furan-2-yl)methanone semicarbazone (BNF) was investigated in different solvents (dichloromethane, tetrahydrofuran, toluene and ethanol) and in polymer matrices of polyvinylchloride (PVC) and ethyl cellulose (EC) by absorption and emission spectrometry. The BNF derivative displayed enhanced fluorescence emission quantum yield, Q(f)=6.1 x 10(-2) and molar extinction coefficient, epsilon=29,000+/-65 cm(-1)M(-1) in immobilized PVC matrix, compared to 2.6 x 10(-3) and 24,573+/-115 in ethanol solution. The offered sensor exhibited remarkable fluorescence intensity quenching upon exposure to Cu(2+) ions at pH 4.0 in the concentration range of 1.0 x 10(-9) to 3.0 x 10(-4)M [Cu(2+)] while the effects of the responding ions (Ca(2+), Hg(+), Pb(2+), Al(3+), Cr(3+), Mn(2+), Mg(2+), Sn(2+), Cd(2+), Co(2+) and Ni(2+)) were less pronounced.     

Solvent extraction, spectrophotometric and inductively coupled plasma atomic emission spectroscopic (ICP-AES) determination of lanthanum(III) with crown hydroxamic acid

A new crown hydroxamic acid, 5,14-N,N'-hydroxyphenyl-4,15-dioxo-1,5,14,18-tetraaza hexacosane (NHDTAHA) for the extraction and spectrophotometric determination of lanthanum(III) is described. Lanthanum(III) forms a yellow coloured complex with NHDTAHA, which is extracted with chloroform, having molar absorptivity 7.7 x 10(3) 1 mol(-1) per cm at 372 nm. The system obeys Beer's law in the range 1.2-20 ppm of lanthanum. The extract is directly aspirated for ICP-AES measurements, the limits for estimation are 5-140 ppb of lanthanum. Lanthanum has been determined in monazite sand and standard samples.     

Rapid and selective method for the spectrophotometric determination of nickel naphthenate in gasoline in a microemulsion

A new method for the spectrophotometric determination of nickel naphthenate in gasoline in a microemulsion was developed. PAN reacts with nickel(II) forming a red complex with composition 1:2 (metal to ligand) nickel(II)-PAN and absorption maximum at 568 nm. Nickel naphthenate in gasoline can be determined with PAN in a microemulsion, in the pH range 3.0 approximately 10.0 with a molar absorptivity of 4.8x10(4) l mol(-1) cm(-1). Beer's law was obeyed up to 0.8 mg l(-1) of nickel(II) in the microemulsion system. The interference of Cu(2+), Fe(3+), Mn(2+), Pb(2+) and Zn(2+) can be eliminated by adding 0.5 ml of a mixed masking agent. The method is rapid, simple and highly selective.     

Use of N-benzyl-2-naphthohydroxamic acid as a highly selective reagent for solvent extraction and spectrophotometric determination of vanadium(V)

N-Benzyl-2-naphthohydroxamic acid extracts vanadium(V) selectively and quantitatively into chloroform from 2-8.5M hydrochloric acid in the presence of Mo(VI), Zr(IV) and Ce(IV). The extraction takes place quickly and gives a stable reddish-violet extract which shows an absorption maximum at 505 nm with molar absorptivity of (5.34 +/- 0.05) x 10(3) 1.mole(-1).cm(-1). The optimum range for the determination is 2.2-7.4 ppm of vanadium(V) in the final solution. The method has been used for the determination of vanadium in steels.     

Solvent extraction and photometric determination of molybdenum (VI) with 2-aminobenzenethiol

A new extractive photometric method is described for estimation of molybdenum with 2-aminobenzenethiol. The green complex in chloroform has its absorbance maximum at 700 nm and is stable for 2 hr when extracted from a solution of optimum pH range 1.4-2.8. The extraction is quantitative. The sensitivity is 0.0075 microg cm (2). Beer's law is obeyed over the range 0.25-10 ppm with optimum range 0.5-4.5 ppm. The molar absorptivity is 7.08 x 10(4) 1.mole(-1). cm(-1). The overall stability constant is 2.0 x 10(8) at 25 +/- 0.1 degrees.     

Column preconcentration of titanium in aluminium and zinc alloys with oxalic acid-ascorbic acid and the ion-pair of sodium 1,2-dihydroxybenzene-3,5-disulphonic acid and tetradecyldimethylbenzylammonium chloride supported on naphthalene using spectrometry

A solid ion-pair compound produced from sodium 1,2-dihydroxybenzene-3,5-disulphonic acid (Tiron) and tetradecyldimethylbenzylammonium chloride(TDBA) supported on naphthalene in a simple glass-tipped funnel tube provides a simple adsorbent system for preconcentrating titanium from some alloys. Titanium reacts with Tiron to form a water-soluble coloured chelate anion which in turn forms a water-insoluble stable titanium/Tiron/TDBA complex with the ion-pair on the surface of naphthalene packed in a column. Titanium is quantitatively retained on the naphthalene in the presence of L-ascorbic acid and oxalic acid in the pH range 3.0-4.5 and at a flow-rate of 1 mil/min. The metal complex and naphthalene were dissolved from the column with 5 ml of dimethylformamide(DMF), and the absorbance of the solution was measured at 398 nm. A calibration graph was linear over the range 1-18 mug of titanium in 5 ml of the final DMF solution. The complex has a molar absorptivity of 1.39 x 10(4) l.mole(-1).cm(-1) and a sensitivity of 3.44 x 10(-3) mug/cm(2) for 0.001 absorbance. Eight replicate determinations for a sample containing 12 mug of titanium gave a mean absorbance of 0.697 with a relative standard deviation of 0.82%. The interference of various ions was studied and optimum conditions were developed for the determination of titanium in various aluminium and zinc alloys.     

Extraction and spectrophotometric determination of cobalt with dithizone

Cobalt(II) in acetate-tartrate buffer (pH 6.0-7.3) is extracted quantitatively as cobalt(III) dithizonate with excess of dithizone in CCl(4). The molar absorptivity in the CCl(4) phase is 4.6 x 10(4) 1.mole(-1).cm(-1) at the absorption maximum 550 nm. The calibration graph is linear for 1-10 mug of cobalt in 10 ml of CCl(4) when excess of dithizone is removed by back-extraction with 0.01M aqueous ammonia. Most interferences can be overcome by (a) initial extraction with dithizone at pH 1.3, (b) selective back-extraction into hydrochloric acid (pH 1 to 2), (c) oxidation of iron and tin to iron(III) and tin(IV) and addition of fluoride to complex the former, and (d) selective reaction of nickel dithizonate with 1,10-phenanthroline in the CCl(4) phase followed by back-extraction of nickel into 0.1M acid. The method has been applied to determination of cobalt in a copper-nickel-zinc alloy and a nimonic alloy.     

Reaction of mercury(II) and xylenol orange-III: determination of microamounts of mercury

Xylenol Orange and mercury(II) react in the presence of various bases, such as hexamine, pyridine and ammonia, to form ternary complexes, which conform to Beer's law. The 1:1:1 Hg(II)/XO/ base complex at pH 6.1 has an absorption maximum at 590 nm and a molar absorptivity of 2.2 x 10(5) l.mole(-1).cm(-1). In the absence of the base the Hg(II)(XO)(2) complex at pH 7.5 and 580 nm has a molar absorptivity of 1.7 x 10(5) l.mole(-1).cm(-1). Interferences are discussed.