Comparison of different methods for the determination of volatile organic compounds in water samples

The aim of this work was to compare the characteristics of three methods, membrane inlet mass spectrometry (MIMS), purge-and-trap gas chromatography-mass spectrometry (P&T) and static headspace gas chromatography (HSGC), for the determination of volatile organic compounds in water samples as used in routine analysis. The characteristics examined included linear dynamic ranges, detection limits of selected environmentally hazardous volatile organic compounds (e.g. toluene, benzene and trichloroethene) in water, required analysis time and reproducibility of the analytical methods. The MIMS and P&T methods had the lowest detection limits for all the tested compounds, ranging from 0.1 to 5 mug 1(-1). Linear dynamic ranges using the MIMS method were about four orders of magnitude and using the P&T method about two orders of magnitude. Detection limits of the HSGC method were 10-100 times higher than those of the other two methods, but the linear dynamic ranges were larger, even up to six orders of magnitude. The analysis time per sample was shortest for the MIMS method, from 5 to 10 min, and ranged around from 35 to 45 min for the HSGC and P&T methods. The reproducibilities of the methods were of the same order of magnitude, in the range of 1-13%. Agreement between the analytical results obtained for spiked samples and for environmental water samples by the three different methods was very good.     

Recent methods for the determination of volatile and non-volatile organic compounds in natural and purified drinking water

Four analytical protocols for the extraction and preconcentration of organic residues in natural or purified drinking water were investigated and compared: closed loop stripping analysis; simultaneous extraction-distillation; purge and trap analysis; continuous liquid-liquid extraction. Organic extracts were submitted to a variety of separation and identification techniques. Volatiles were determined by conventional capillary column gas chromatography with tandem mass spectrometry, using triple-stage quadrupole instruments. Non-volatile and thermally labile molecules were investigated by several different techniques (high-temperature gas chromatography, capillary column supercritical fluid chromatography, pyrolysis gas chromatography-mass spectrometry, thermospray liquid chromatography with tandem mass spectrometry and conventional fast-atom bombardment with tandem mass spectrometry). Several samples recently examined in the laboratory provide examples of this multitechnique approach for a more complete knowledge of the organic carbon distribution in water-dissolved organic matter, taking into account organic substances with widely different volatilities, polarities and thermal stabilities.     

GC-MS analytical methods for the determination of personal-care products in water matrices

This article discusses the more recent methods combining gas chromatography and mass spectrometry (GC-MS) for analysis of personal-care products (PCPs) in water matrices. We describe different procedures for sample extraction and preparation as well as different instrumental methods commonly used for these compounds. GC-MS and GC-tandem MS (GC-MS²), which are complementary to liquid chromatography combined with MS (LC-MS), allow identification and quantification of PCPs belonging to different classes with the sensitivity and the selectivity necessary for environmental monitoring. The compounds investigated include fragrances (e.g., nitro and polycyclic musks), antimicrobial compounds (e.g., triclosan), ultraviolet blockers (e.g., methylbenzylidene camphor), antioxidants and preservatives (e.g., phenols and p-hydroxybenzoic acid (parabens)) and insect repellents (e.g., N,N-diethyl-m-toluamide (DEET)). We critically review data in the literature by focusing attention on analytical methods devoted to simultaneous detection and quantification of structurally diverse pharmaceuticals and PCPs.     

Structural elucidation of disinfection by-products in treated drinking water

Two unusual disinfection by-products have been detected periodically in the gas chromatography/mass spectrometry (GC/MS) characterization analyses of semi-volatile organics in treated drinking water. The electron ionization (EI) mass spectra contained mono-chlorinated and mono-brominated ions at m/z 107/109 and 151/153, respectively. Library searching techniques suggested mono-halogenated butanol structures but no matches could be found. Positive ion chemical ionization (CI) spectra contained mono-chlorinated and mono-brominated ions at m/z 105/107 and 149/151, respectively. No [M + H]+ ions were initially observed. Accurate mass measurements confirmed the empirical formulae for the significant ions in the EI spectra and the mono-halogenated butanol structures. Further CI experiments with other reagent gases and instruments revealed possible molecular weights of 139 and 183 Da, respectively. Tandem mass spectrometry (MS/MS) experiments in EI and CI were used to elucidate the fragmentation schemes. The two compounds have been tentatively identified as 1-aminoxy-1-chlorobutan-2-ol and 1-aminoxy-1-bromobutan-2-ol, respectively.     

Fast analysis of volatile organic compounds and disinfection by-products in drinking water using solid-phase microextraction-gas chromatography/time-of-flight mass spectrometry

A fast method was developed for the extraction and analysis of volatile organic compounds, including disinfection by-products (DBPs), with headspace solid-phase microextraction (HS-SPME) and gas chromatography/mass spectrometry (GC/MS) techniques. A GC/time-of-flight (TOF)-MS instrument, which had fast acquisition rates and powerful deconvolution software, was used. Under optimum conditions total runtime was 45s. Volatile organic compounds (VOCs), including purgeable A and B compounds (listed in US Environmental Protection Agency method 624), were identified in standard water samples. Extraction times were 1min for more volatile compounds and 2min for less volatile compounds. The method was applied to the analysis of water samples treated under different disinfection processes and the results were compared with those from a liquid-liquid extraction method.     

Standardized methods for measuring radionuclides in drinking water

Summary In 2002 the Italian Standardisation Organisation (UNI) - Nuclear Energy Commission (UNICEN) - appointed a working group with the main task of writing a set of standards on drinking water measurements. To date two standards have been designed, namely, for total alpha- and beta-activity, and ²²²Rn. Further procedures are under development for measuring ²²⁶Ra and U isotopes, and gamma-emitting radionuclides in water. The paper gives an overview of these standards, both developed and under study, with special attention to the validation of the methods.     

Application of classification methods to analyze chemicals in drinking water quality

Accreditation and Quality Assurance - To analyze drinking water dataset, various statistical methods have been applied, including discriminant analysis, logistic regression and cluster analysis, to...     

臭氧化对水厂水中消毒副产物生成势的影响

以某饮用水厂沿程工艺出水为研究对象,研究了臭氧化预处理对水体中消毒副产物(DBPs)氯化生成势的影响。结果表明,水厂生物处理单元产生的胞外聚合物(EPS)和溶解性微生物产物(SMP)等生物源有机物是非常有效的DBPs前体物,但其更易于氯化生成三卤甲烷(THMs)而非卤乙酸(HAAs)。水厂水中存在的THMs前体物主要是各类大分子量有机物,并且臭氧工艺对其有较好的氧化去除效果。水厂水中经臭氧氧化产生的小分子量有机物可能是更为有效的一氯乙酸(MCAA)和一溴乙酸(MBAA)前体物。此外,当水体中三氯乙酸(TCAA)前体物浓度较高时,臭氧工艺对TCAA生成势具有很好的去除效果。     

Development of visual analytical methods for trace determination.

In this paper our recent progress in the field of simple analytical methods is reviewed, with particular focus on the development of rapid, inexpensive, yet sensitive techniques to visualize trace elements of medical, industrial, and environmental importance. Our objective is to solve long-standing practical problems in these fields. We have repeatedly shown that visual perception is remarkably sensitive when used with our new techniques. The applicability of the proposed methods to real samples is also discussed. Making measurements visually is a method free from machinery malfunctions and serves as a simple and sensitive analytical technique, avoiding all of the practical disadvantages associated with sophisticated instrumentation as well as tedious procedures.     

Methods validation for the determination of trihalomethanes in drinking water

Trihalomethanes (THMs), chlorinated by-products in drinking water, have been determined by comparing some analytical methods, based on the following techniques: liquid-liquid extraction-gas chromatography-mass spectrometry (LLE-GC-MS), headspace-gas chromatography-mass spectrometry (headspace-GC-MS) and purge and trap-gas chromatography-mass spectrometry (PT-GC-MS). The mass spectrometer was operated in the SIM mode. The quantitative methods were validated and compared to the ability to identify and to measure reliably the yields of the toxic compounds. Good validation parameters were obtained for each method.     

Validation of analytical methods used for determination of nitrate in soil

The standard method (ISO/DIS 14255) and the quick test were used for determination of nitrate in soil. We validated both methods using parameters such as accuracy, reproducibility within 1 day and between days, limit of detection and limit of quantification. The accuracy of the results was determined using the analysis of samples from the international interlaboratory scheme WEPAL. The accuracy of the standard method was good, while for the quick test the results were not accurate. The standard method showed a solid reproducibility of measurement results (in 1 day, relative standard deviation, RSD=0.2%; between days, RSD=0.8%). The quick test gave poorer results (in 1 day, RSD=6%; between days, RSD=7%). We tried to established the compatibility of both methods on real soil samples and we were satisfied to obtain the correlation coefficient 0.98 using the regression straight line. The analyses with the quick field instrument are much simpler and cheaper than the standard laboratory analyses and can be used for advising on nitrogen fertilisation.     

Immunochemical analytical methods for the determination of peanut proteins in foods

Peanut proteins can cause allergenic reactions that can result in respiratory and circulatory effects in the body sometimes leading to shock and death. The determination of peanut proteins in foods by analytical methods can reduce the risk of serious reactions in the highly sensitized individual by allowing for the detection of these proteins in a food at various stages of the manufacturing process. The method performance of 4 commercially available enzyme-linked immunosorbent assay (ELISA) kits was evaluated for the detection of peanut proteins in milk chocolate, ice cream, cookies, and breakfast cereals: ELISA-TEK Peanut Protein Assay, now known as "Bio-Kit" for peanut proteins, from ELISA Technologies Inc.; Veratox for Peanut Allergens from Neogen Corp.; RIDASCREEN Peanut Kit from R-Biopharm GmbH; and ProLisa from Canadian Food Technology Ltd. The 4 test kits were evaluated for accuracy (recovery) and precision using known concentrations of peanut or peanut proteins in the 4 food matrixes. Two different techniques, incurred and spiked, were used to prepare samples with 4 known concentrations of peanut protein. Defatted peanut flour was added in the incurred samples, and water-soluble peanut proteins were added in the spiked samples. The incurred levels were 0.0, 10, 20, and 100 microg whole peanut per g food; the spiked levels were 0.0, 5, 10, and 20 microg peanut protein per g food. Performance varied by test kit, protein concentration, and food matrix. The Veratox kit had the best accuracy or lowest percent difference between measured and incurred levels of 15.7% when averaged across all incurred levels and food matrixes. Recoveries associated with the Veratox kit varied from 93 to 115% for all food matrixes except cookies. Recoveries for all kits were about 50% for cookies. The analytical precision, as measured by the variance, increased with an increase in protein concentration. However, the coefficient of variation (CV) was stable across the 4 incurred protein levels and was 7.0% when averaged across the 4 food matrixes and analytical kits. The R-Biopharm test kit had the best precision or a CV of 4.2% when averaged across all incurred levels and food matrixes. Because measured protein values varied by test kit and food matrix, a method was developed to normalize or transform measured protein concentrations to an adjusted protein value that was equal to the known protein concentration. The normalization method adjusts measured protein values to equal the true protein value regardless of the type test kit or type food matrix.     

Review of analytical methods for the determination of chlorine dioxide

The present study reviews more than twenty years (1985-present) of published research on the development and application of analytical procedures for the determination of chlorine dioxide, a widely used disinfectant and bleaching agent. The review covers a variety of techniques including batch and automated spectrophotometry and fluorimetry, electroanalysis and chromatography. The analytical figures of merit to the methods are presented, while critical discussion regarding their advantages and disadvantages is addressed.      

六氯丁二烯分析方法研究进展

六氯丁二烯是一种持久性有机污染物,于2015年和2017年分别被列入《斯德哥尔摩公约》附件A和附件C的受控污染物名单中。六氯丁二烯的来源、环境赋存和影响等研究对控制该新增受控持久性有机污染物污染具有重要意义,而灵敏可靠的六氯丁二烯分析方法是开展相关研究的前提和基础。近年来已有不少学者将六氯丁二烯作为分析目标物之一进行了检测或方法学研究。基于这些研究成果,该文综述了六氯丁二烯分析方法的研究进展,其中重点介绍了空气、水体、土壤、污泥、生物组织等多种介质中六氯丁二烯的样品前处理方法,并比较了各方法的优缺点,以期为该领域的进一步研究提供参考。空气中六氯丁二烯主要由泵抽气通过吸附管而采集,再经热脱附后进行仪器分析,检出限在ng/m³水平。也有研究应用聚氨酯泡沫被动采样器和吸附剂填充聚氨酯泡沫被动采样器采集大气中六氯丁二烯及其他污染物。基于吸附剂填充聚氨酯泡沫被动采样器的分析方法灵敏度较高,其对六氯丁二烯的检出限低至0.03 pg/m³。然而目前被动采样体积仅根据六氯丁二烯的log K_OA系数估算,未来仍需进一步实验校正。水体样品前处理通常也较简单,通过吹扫捕集、液-液萃取或固相萃取目标物后进行仪器分析。固相萃取法能够同步实现目标物的提取、净化和浓缩,在水样中六氯丁二烯分析方面具有明显优势。固相萃取柱类型以及干燥步骤中柱中残留水分去除率均会影响六氯丁二烯的回收率。灰尘、土壤、沉积物、污泥和生物组织等固体介质样品基质最为复杂,需联合多种方法进行前处理。固体样品中六氯丁二烯提取方法包括索氏提取,加速溶剂萃取和超声萃取,其中超声萃取法应用最为广泛。固体基质净化方面主要采用层析柱色谱法,多根净化柱联用或多层复合柱能够提升净化效果。仪器分析方面,六氯丁二烯主要采用气相色谱和质谱联用检测,高性能质谱检测器如串联质谱能够大大提高六氯丁二烯的检测灵敏度,具有较大的应用潜力。     

Flow-through determination of sulphate in water using different methods: A comparison

Summary Sulphate was determined in various kinds of environmental samples using a continuous-flow system, a flow-injection system or a flow-through titrimeter. The reagents in the three cases consisted basically of DMSA(III), KNO₃ and Ba(ClO₄)₂. The results of the three methods were evaluated statistically. A comparison of the three methods is given. The advantage of the DSMA(III)-methods is shown in a comparison with the commonly used thorin method.

---

Sulfatbestimmung in Wasser mit verschiedenen Methoden in einem Durchflußsystem; ein Vergleich

Zusammenfassung Die Bestimmung von Sulfat in unterschiedlichen Umweltwasserproben wurde mit drei verschiedenen Systemen vorgenommen: mit continuous-flow und flow-injection Durchflußsystemen und mit einem Durchflußtitrimeter. Die Reagentien bei den drei Bestimmungen waren DMSA(III), KNO₃ und Ba(ClO₄)₂. Die Ergebnisse wurden statistisch ausgewertet und die Methoden miteinander verglichen. Die DMSA(III)-Verfahren sind der weit verbreiteten Thorin-Methode vorzuziehen.

     

An evaluation of solid-phase microextraction for analysis of volatile organic compounds in drinking water

Solid-phase microextraction (SPME) has been applied to the quantitative analysis of 60 volatile organic compounds (VOCs) in drinking water. Equilibration curves for the partitioning of the VOCs between the fiber coating and fortified water obtained at 20, 50, and 80 °C are found between the theoretical curves for completely agitated and non-agitated samples. Two important factors for the amount adsorbed by the SPME fiber coating are the extraction time and the fiber coating/water distribution coefficient, K_FW . Both depend on the sample temperature, but in a counteracting manner: Increasing the temperature shortened the equilibration times, especially for the heavier VOCs, but also lead to lower K_FW values, and consequently a lower sensitivity of the method. K_FW values are determined for 33 of the VOCs at 40, 60, and 80°C and the heats of adsorption,–ΔH, are calculated. The nature of the adsorption is found to be exothermic which explains the decreasing sensitivity of the method with increasing temperature. Detection limits were typically from 20 ng/l to 200 ng/l, except for the very light VOCs with which detection difficulties were encountered. For all of the VOCs the linear range extended from the lowest concentration at which they were actually detected to at least 5 mg/l. The precision, 3% average standard deviation when an internal standard was used, was satisfactory for most quantitative routine analysis. SPME was also applied to head-space (HS) analysis of drinking water through the coupled equilibrium between water/head-space/fiber coating. HS-SPME is demonstrated to have shorter equilibration times than SPME directly from the water and equal sensitivities, except for the very light VOCs. Water samples from a drinking water plant contaminated in the low μg/l range with 1,1,1-trichloroethane, trichloroethene and tetrachloroethene were analyzed. There seems to be a reasonable agreement between results obtained by SPME and purge & trap. It is concluded that SPME has a great potential for drinking water analysis.     

Experimental design for the study of two derivatization procedures for simultaneous GC analysis of acidic herbicides and water chlorination by-products

Two well known derivatization procedures, pentafluorobenzylation and BF(3)/methanol esterification, were compared for their applications to GC analysis of acidic water micropollutants (chloroacetic and phenoxyalkanoic acids). A two-level factorial design was used to determine the influence of different parameters and their interactions on each derivatization process. The studied parameters are the reaction time, the amount of reagent (PFBBr) or catalyst (BF(3)) and the temperature. Considering pentafluorobenzylation, the most influential factors are the concentration of PFBBr and the interaction ;temperature-time', which improve the derivatization efficiency. However, a PFBBr concentration of 250 mg l(-1) in the reaction medium cannot be exceeded because of the increase in interfering by-products in GC/ECD. Moreover, chloroacetic acid derivatives are co-eluted with these compounds. This disadvantage was not observed in the operating conditions of GC/MS. The improved pentafluorobenzylation procedure allows the direct determination of the derivatives in GC/ECD without any purification step. The average detection limits are 1.6 and 80 mug l(-1), respectively in GC/ECD and in GC/MS. The reproducibility is 13%. For the BF(3)/methanol esterification, the interactions ;BF(3) concentration-temperature' and ;BF(3) concentration-reaction time' are significant and have a negative effect on the derivatization yield. A linear model was therefore proposed and validated in the experimental area under study. All the compounds studied were detected in GC/MS, and the average detection limit is 2 mug l(-1). The reproducibility is around 7%. Therefore, after optimization, BF(3)/methanol esterification followed by GC/MS is as sensitive as pentafluorobenzylation used with GC/ECD, and more reproducible.     

Application of capillary gas chromatography with electron capture detection and split-splitless injection to the evaluation of volatile halogenated hydrocarbon removal using hydrogen peroxide after break-point chlorination in drinking water treatment

In this paper we report a way to evaluate the removal of volatile halogenated hydrocarbons formed after break-point chlorination in the Arno river raw water at the Mantignano Utility, Florence, Italy, following dechlorination by hydrogen peroxide. The removal evaluation is performed by GC-ECD on fused silica capillary columns with split-splitless injection on n-pentane extracts and by other analytical techniques such as UV₂₅₄ absorption, TOC and TOX. Both laboratory and pilot plant data on Arno river raw water are reported and discussed.     

Electrochemical aptasensor for the determination of bisphenol A in drinking water

We present an electrochemical aptasensor for rapid and ultrasensitive determination of the additive bisphenol A (BPA) and for screening drinking water for the presence of BPA. A specific aptamer against BPA and its complementary DNA probe were immobilized on the surface of a gold electrode via self-assembly and hybridization, respectively. The detection of BPA is mainly based on the competitive recognition of BPA by the immobilized aptamer on the surface of the electrode. The electrochemical aptasensor enables BPA to be detected in drinking water with a limit of detection as low as 0.284 pg?mL^?1 in less than 30 min. This extraordinary sensitivity makes the method a most powerful tool for on-site monitoring of water quality and food safety.