Resonance scattering spectral analysis of chlorides based on the formation of (AgCl)n(Ag)s nanoparticle

A novel resonance scattering spectral method has been proposed for the determination of trace amounts of chlorides in the range of 2 x 10(-7)-8 x 10(-6) mol/l. It was based on the photochemical reaction system of AgNO3-NaCl-sodium oxalic to form the (AgCl)nucleus (n)(Ag)shell (s) nanoparticle. There is a strongest resonance scattering peak at 470 nm and a maximum absorption peak at 425 nm. The concentration of chlorides is proportional to the intensity of resonance scattering at 470 nm. The nonlinear resonance scattering peaks of the nanoparticle system have been also considered, according to the theory of the interaction between the surface electron of nanoparticle and the incidence photon.     

Luminescence effect of silver nanoparticle in water phase

Yellow silver nanoparticles in water phase were prepared by microwave synthesis method. Study found that there is a fluorescence peak at 465 nm and a strongest resonance scattering peak at 460 nm for the nanoparticles. The resonance scattering intensity at 465 nm I(460 nm). fluorescence intensity at 465 nm F(465)(nm) and absorbance at 455 nm A(455 nm) were found linear to the concentration c(Ag) in the range from 0 to 3.5x10(-4)mol/L Ag, with linear regression equation for I(460 nm)=48.1x10(4) c(Ag)+3.69 and F(465 nm)=28.7x10(4)c(Ag)+3.50 and A(455 nm)1.23x10(4)c(Ag)+0.01, their regression coefficient for 0.9976, 0.9954 and 0.9957, respectively. When the c(Ag) was over 3.5x10(-4)mol/L, the resonance scattering peak and fluorescence peak of 465 nm take place red-shift and display luminescence quenching, but the absorption peak place does not change and the absorption intensity enhances. The paper reports the spectral properties of silver nanoparticles in water phase, and offers the principle of interface luminescence electron to state the luminescence effect of silver nanoparticles.     

Spectral properties of the association nanoparticle system of ciprofloxacin-phloxine and its application to fluorescence analysis.

There is a fluorescence peak at 570 nm, and a maximum absorption peak at 560 nm for phloxine (PHLO) in a pH 7 water solution. Under these conditions, the ciprofloxacin cation (CPFX+) and PHLO- combine into hydrophobic CPFX-PHLO association molecule by means of static gravitation. There are stronger van der Waals forces and hydrophobic forces among the CPFX-PHLO molecules. Thus, they aggregate automatically to the (CPFX-PHLO)n association nanoparticle in red-violet color. That was characterized by scan electron microscopy (SEM), hyperfiltration and dialysis tests. In 0.04 M HCl, the red-violet nanoparticles exhibited a Rayleigh scattering peak at 470 nm, a resonance scattering peak at 580 nm, a maximum absorption wavelength at 565 nm, and a fluorescence peak at 450 nm. The fluorescence analytical conditions of CPFX have been considered. The CPFX concentration in the range of 1.0 x 10(-6)-4.0 x 10(-5) M is linear to the fluorescence intensity, F450nm. The detection limit was achieved at 4.0 x 10(-7) M CPFX. The CPFX in real samples was determined with satisfactory results.     

液相卤化银纳米微粒的界面荧光和共振散射光谱特性

液相卤化银纳米微粒的共振散射光谱和发射光谱表明,AgCl和AgBr纳米微粒均在330,400,470和680nm处产生4个共振散射峰,在340,400和470nm处产生三个荧光峰．Ad纳米微粒在340,400,437,470和680nm处产生5个共振散射峰;除在340,400和470nm处产生3个荧光峰外,在434nm处有一最强的荧光峰．卤化银纳米微粒体系的浓度对共振散射信号的影响与浓度对荧光强度的影响一致,Aga,AgBr和AgI体系的共振散射光信号强度分别约为荧光信号的110,130和80倍,即荧光与共振散射之间存在相关性．提出了液相AgX纳米微粒荧光产生机理,解释了荧光与共振散射之间存在相关性的原因．     

Determination of trace chlorine dioxide based on the plasmon resonance scattering of silver nanoparticles

A plasmon resonance scattering (PRS) method for chlorine dioxide is reported based on the oxidization of silver nanoparticles (NPs) by it, in pH 9.1 ammonia-ammonium nitrate buffer solutions. Silver NPs exhibit strong PRS signals at 470nm, and can be oxidized by ClO(2), which results in PRS quenching at 470nm. It was found that the PRS quenching intensity is proportional to the concentration of chlorine dioxide over the range of 0.0011-0.185microg/mL, with a detection limit (3sigma) of 0.00050microg/mL and the correlation coefficient of 0.9995. The method is simple, rapid and cost effective. It was applied to the determination of chlorine dioxide in drinking water, with satisfactory results.     

Resonance double light scattering method for the determination of proteins with morin-CTMAB

A new determination method of proteins with the limit of determination at nanogram levels is proposed by using a common spectrofluorimeter to detect intensity of resonance double line scattering (RDLS). Proteins including bovine serum albumin (BSA), human serum albumin (HSA) can combine with morin and cetyltrimethylammonium briomide (CTMAB) in the pH range 7.0-8.0 and produce enhanced RDLS signal at lambda(ex)/lambda(em) 305.0/610.0 nm. Optimization conditions for the morin-protein-CTMAB interaction were tested. In the studied system, BSA/CTMAB/morin = 1:2:3. The association constant of morin with BSA is 5.2 x 10(4). Under the optimum conditions, the linear range is 7.5 x 10(-8)-1.0 x 10(-5) g/ml for BSA, 2.5 x 10(-8)-5.0 x 10(-6) g/ml for HSA. The detection limits (S/N = 3) are 66.0 ng/ml for BSA and 23.0 ng/ml for HSA, respectively. Four synthetic samples were analyzed satisfactorily.     

A highly sensitive assay for spectrofluorimetric determination of reduced glutathione using organic nano-probes

In this study, the new nanometer-sized fluorescent particles (1-pyrenemethylamine nanoparticles) have been prepared by reprecipitation method under ultrasonic radiation. These nanoparticles have the potential to overcome problems encountered by organic small molecules by combining the advantages of high photobleaching threshold, high quantum yield, long fluorescence lifetime, good chemical stability, and wide excitation spectral properties. These nanoparticles will be able to be directly used as fluorescent nanoparticles probe without modification. A new fluorimetric method for the determination of reduced glutathione (GSH) has been developed with these nanoparticles. Under optimal conditions, the organic nanoparticles reacted with GSH and o-phthalaldehyde (OPA) to give a highly fluorescent derivative in Na2CO3-HCl buffer (pH=9.0). The fluorescence excitation and emission wavelengths of fluorescent derivative were located at 345 and 400 nm, respectively. The relative fluorescence intensity (RF) was linear in the range of the GSH concentration from 8.0x10(-7) to 1.1x10(-4)moll(-1). Limit of detection of 7.1x10(-8)moll(-1) was achieved for the reduced glutathione. The method was validated and applied to the analysis of three synthetic samples containing reduced glutathione.     

Substrates with discretely immobilized silver nanoparticles for ultrasensitive detection of anions in water using surface-enhanced Raman scattering

Positively charged silver nanoparticles, Ag [+], obtained by UV-assisted reduction of silver nitrate using branched poly(ethyleneimine) (BPEI) and 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) solutions as reducing agents, were immobilized on glass surfaces to produce substrates active in surface-enhanced Raman scattering (SERS). Negatively charged silver nanoparticles, Ag [-], synthesized via a modified citrate reduction method, were also investigated for comparison. At a sparse surface coverage of 30 nanoparticles/microm(2), substrates with immobilized Ag [+] showed increasing SERS sensitivity to a variety of anions in water in the order SO(4)(2-) < CN(-) < SCN(-) approximately ClO(4)(-), with corresponding binding constants of 10(5), 3.3 x 10(5), and 10(7) (for both SCN- and ClO(4)(-)) M(-1), respectively. This order followed the Hofmeister series of anion binding in water. Significantly, substrates with Ag [+] allowed limit of detection values of 8.0 x 10(-8) M (8 ppb) and 2.7 x 10(-7) M (7 ppb) for environmentally relevant perchlorate (ClO(4)(-)) and cyanide (CN(-)) anions, respectively. In contrast, substrates with immobilized Ag [-], even upon subsequent modification by a monolayer of BPEI for positive surface charge of the nanoparticles, showed a drastically lower sensitivity to these anions. The high sensitivity of substrates with Ag [+] for anion detection can be attributed to the presence of two types of functional groups, amino and amide, on the nanoparticle surface resulting from UV-assisted fragmentation of BPEI chains. Both amino and amide provide strong binding of anions with Ag [+] nanoparticles due to the synergistic effect through a combination of electrostatic, hydrogen bonding, and dispersive interactions.     

聚丙烯酰胺存在下微波高压合成银纳米粒子及其光谱特性

以聚丙烯酰胺为还原剂和稳定剂 ,采用微波高压液相合成法制备了黄色银纳米粒子。用吸收光谱和共振散射光谱研究了其制备条件的影响。在 4 2 1.6nm处产生最大吸收峰 ,在 4 70nm处产生一个最强共振散射峰。实验表明 :该法制备的银纳米粒子粒径均匀 ,平均粒径为 6 6nm ,其稳定性和分散性较好 ,合成方法简便、快捷。     

螯合微粒共振散射光谱分析测定痕量钴

研究了螯合微粒共振散射光谱的分析应用。结果表明,在pH为9．5的NH3-NH3Cl缓冲溶液中,Co（Ⅱ）与DDTC形成稳定的螯合物微粒体系,存在共振散射效应。在一定质量浓度范围内,Co（Ⅱ）的质量浓度与共振散射强度（IRS）呈较好的线性关系。其线性范围为0．012～1．44μg／mL,检出限为0．0012μg／mL,用于针剂维生素B12中钴的测定,方法简单、灵敏度高、重现性好,结果满意。     

A study on silver nanoparticles-sensitized fluorescence and second-order scattering of the complexes of Tb(III) with ciprofloxacin and its applications

Fluorescence of terbium(III) is sensitized when excited in the presence of ciprofloxacin (CPLX) in the aqueous solution because a Tb(III)-CPLX complex is formed and the maximum fluorescence peak locates at 545 nm. The second-order scattering (SOS) peak at 545 nm also appears for the Tb(III)-CPLX complexes with the excitation wavelength of 272 nm. The intensity at 545 nm obviously increases when the silver nanoparticles are added to the Tb(III)-CPLX system, and the relative intensity is proportional to the concentration of CPLX. Based on this phenomenon, a new method for the determination of CPLX has been developed by using a common spectrofluorometer to measure the intensity of fluorescence and SOS. The intensity is enhanced most by silver nanoparticles at pH 6.0. The calibration graph for CPLX is linear in the range of 3.0 x 10(-9) to 1.0 x 10(-5) mol l(-1). The detection limit is 8.5 x 10(-10) mol l(-1). The method was applied satisfactorily to the determination of CPLX in tablets and capsules. The results show that silver nanoparticles with certain size and concentration can enhance the fluorescence and SOS intensity of the system.     

Optical detection of phenolic compounds based on the surface plasmon resonance band of Au nanoparticles

An indirect colorimetric method is presented for detection of trace amounts of hydroquinone (1), catechol (2) and pyrogallol (3). The reduction of AuCl4(-) to Gold nanoparticles (Au-NPs) by these phenolic compounds in the presence of cetyltrimethylammonium chloride (CTAC) produced very intense surface plasmon resonance peak of Au-NPs. The plasmon absorbance of Au-NPs allows the quantitative colorimetric detection of the phenolic compounds. The calibration curves derived from the changes in absorbance at lambda = 568 nm were linear with concentration of hydroquinone, catechol and pyrogallol in the range of 7.0 x 10(-7) to 1.0 x 10(-4)M, 6.0 x 10(-6) to 2.0 x 10(-4)M and 6.0 x 10(-7) to 1.0 x 10(-4)M, respectively. The detection limits were 5.3 x 10(-7), 2.5 x 10(-6) and 3.2 x 10(-7)M for the hydroquinone, catechol and pyrogallol, respectively. The method was applied satisfactorily to the determination of phenolic compounds in water samples and pharmaceutical formulations.     

Determination of a cationic surfactant with naphthalene black 12B by the resonance light scattering technique

A new determination method for a cationic surfactant, zephiramine (Zeph), was developed with resonance light scattering (RLS) technique, based on the interaction of naphthalene black 12B with Zeph. The resonance light scattering (RLS) and UV characteristics of interaction between naphthalene black 12B and Zeph were studied. The RLS intensity of naphthalene black 12B at 363 nm was greatly enhanced in the presence of Zeph at pH 6.0. The enhanced RLS is proportional to the concentration of Zeph in the range of 3.20 x 10(-7) - 1.44 x 10(-5) mol L(-1). The limit of detection was 8.8 x 10(-8) mol L(-1). The proposed method was applied to the determination of Zeph in synthetic and spiked water samples with the recovery of 96.2-104% and RSD of 1.1-2.5%.     

罗丹明6G缔合微粒荧光猝灭法测定痕量碘酸根

研究发现在0.01mol/LHCl-8.0×10-4mol/LKI介质中,罗丹明6G(RhG)在550nm处有1个荧光峰.当有IO-3,I-3与RhG形成缔合微粒,550nm处荧光峰猝灭,在320、400、6103存在时,IO-3与过量的I-反应生成I-nm处有3个共振散射峰,在470nm处有1个同步散射峰.碘酸根浓度在2.0～100×10-7mol/L范围内与荧光猝灭强度成线性关系.据此建立了一个测定食盐中IO-3的荧光猝灭分析法.光谱研究结果表明,(RhG-I3)n缔合微粒和界面的形成是导致体系荧光猝灭的根本原因.     

Spectrophotometric catalytic determination of ultra-trace amounts of selenium based on the reduction of resazurin by sulphide

A sensitive catalytic method for determining ng ml^? concentration of selenium is described. The method is based on the catalytic action of Se(IV) on the reduction of resazurin by sulphide, monitored spectrophotometrically at 605 nm. The linearity range of the calibration graph is dependent on the concentration of sulphide. The variables affecting the rate of the reaction were investigated and the optimum conditions were established. The method is simple, rapid, precise, sensitive and widely applicable. As low as 8.0 × 10^?4 μg ml^?1 of selenium can be determined. The relative standard deviation of seven determination of 10 ng Se was 0.7%. The determination of Se(IV) in the presence of Se(VI) and the determination of total selenium are also described.     

Determination of trace amounts of dipyridamole by stripping voltammetry using a Nafion modified electrode

This paper presents a new method for determination of dipyridamole by anodic stripping voltammetry using a Nafion modified glassy carbon electrode. The stripping peak current was proportional to the concentration of dipyridamole over the range of 1.0 x 10(-9)-8.0 x 10(-8) M in (pH 1.7) BrittondashRobinson buffer with 1 min accumulation. The detection limit has been estimated as 8.0 x 10(-11) M with 4 min accumulation. The method has been successfully applied to the determination of dipyridamole in human serum.     

Development of novel reagent for Hantzsch reaction for the determination of formaldehyde by spectrophotometry and fluorometry.

A novel reagent, acetoacetanilide (AAA), was introduced to the determination of formaldehyde based on Hantzsch reaction. A simple and highly sensitive fluorometric method was achieved by using AAA. The main advantages in the use of this reagent are: the reaction is carried out at room temperature without any heating system, the cyclization product based on Hantzsch reaction is soluble in water, and the product can be detected by spectrophotometry and fluorometry. The maximum absorption wavelength of the product occurs at 368 nm, and the maximum excitation and emission wavelengths are found at 370 and 470 nm, respectively. Several important experimental variables of the procedures were examined; particularly, the reaction temperature, reaction time, concentrations of reagents, and pH of the reagent solution were optimized for improving the detecting sensitivity. The calibration graph was linear in the range of 1 x 10(-7) - 1 x 10(-6) M or much higher concentrations. The limit of detection (LOD), based on three times of the standard deviation of the reagent blank, was 2.0 x 10(-8) M. The proposed method was applied to the determination of formaldehyde in environmental water samples. Many foreign species commonly existing in water samples did not interfere with the determination of formaldehyde in the proposed method.     

罗丹明B-PdI2-4缔合纳米粒子体系的极谱猝灭效应

缔合纳米微粒;共振散射;罗丹明B-PdI2-4缔合纳米粒子体系的极谱猝灭效应     

Nanostructures versus solid solutions: low lattice thermal conductivity and enhanced thermoelectric figure of merit in Pb9.6Sb0.2Te10-xSex bulk materials

The series of Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) compounds with different Se content (x) were prepared, and their structure was investigated at the atomic and nanosized regime level. Thermoelectric properties were measured in the temperature range from 300 to 700 K. The Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) series was designed after the refinement of the single-crystal structure of Pb(3.82)Sb(0.12)Te(4) (Pb(9.6)Sb(0.3)Te(10); S.G. Pmm) by substituting isoelectronically in anion positions Te by Se. The Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x)() compounds show significantly lower lattice thermal conductivity (kappa(L)) compared to the well-known PbTe(1)(-)(x)Se(x) solid solutions. For Pb(9.6)Sb(0.2)Te(3)Se(7) (x = 7), a kappa(L) value as low as 0.40 W/m.K was determined at 700 K. High-resolution transmission electron microscopy of several Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) samples showed widely distributed Sb-rich nanocrystals in the samples which is the key feature for the strong reduction of the lattice thermal conductivity. The reduction of kappa(L) results in a significantly enhanced thermoelectric figure of merit of Pb(9.6)Sb(0.2)Te(10)(-)(x)Se(x) compared to the corresponding PbTe(1)(-)(x)Se(x) solid solution alloys. For Pb(9.6)Sb(0.2)Te(3)Se(7) (x = 7), a maximum figure of merit of ZT approximately 1.2 was obtained at approximately 650 K. This value is about 50% higher than that of the state-of-the-art n-type PbTe. The work provides experimental validation of the theoretical concept that embedded nanocrystals can promote strong scattering of acoustic phonons.     

Resonance Rayleigh scattering technology as a new method for the determination of the inclusion constant of beta-cyclodextrin

The interaction of procaine hydrochloride and beta-cyclodextrin in aqueous solution was studied using resonance Rayleigh scattering technology. The molar ratio of the inclusion complex was 1:1 established by spectrophotometry. The resonance Rayleigh scattering technology was first applied in the determination of the beta-cyclodextrin inclusion constant. The inclusion constant of procaine hydrochloride beta-cyclodextrin complex Kf is 1.23 x 10(2) and 1.27 x 10(2) l mol(-1) for method I and 1.15 x 10(2) and 1.21 x 10(2) l mol(-1) for method II. These determination results were in correspondence with the results of the spectrophotometric and fluorescence methods. Therefore, the resonance Rayleigh scattering method can be used as a new technology for the determination of the inclusion constant.