Ion-containing reverse osmosis membranes obtained by radiation grafting method

Cationic membranes obtained by radiation grafting of acqueous acrylic acid onto low density polyethylene films followed by alkaline treatment to confer ionic character in the graft chains, were tested for reverse osmosis desalination of saline water. Selected physical properties of such membranes were investigated. The grafted membranes prossess good mechanical and electrical properties. Water uptake for the alkali-treated membrane was much higher than that of the alkali-untreated one. The effect of operation time, degree of grafting, applied pressure and feed concentration on the water flux and salt rejection for the grafted membranes was investigated. Such cationic membranes showed good durability, thermal and chemical stability, acceptable water flux and salt rejection which may make them acceptable for practical use in reverse osmosis desalination of sea water.     

Effect of double bond position on lipid bilayer properties: insight through atomistic simulations

Phosphatidylcholines (PCs) are among the most common phospholipids in plasma membranes. Their structural and dynamic properties are known to be strongly affected by unsaturation of lipid hydrocarbon chains, yet the role of the exact positions of the double bonds is poorly understood. In this work, we shed light on this matter through atomic-scale molecular dynamics simulations of eight different one-component lipid bilayers comprised of PCs with 18 carbons in their acyl chains. By introducing a single double bond in each acyl chain and varying its position in a systematic manner, we elucidate the effects of a double bond on various membrane properties. Studies in the fluid phase show that a number of membrane properties depend on the double bond position. In particular, when the double bond in an acyl chain is located close to the membrane-water interface, the area per lipid is considerably larger than that found for a saturated lipid. Further, when the double bond is shifted from the interfacial region toward membrane center, the area per lipid is observed to increase and have a maximum when the double bond is in the middle of the chain. Beyond this point, the surface area decreases systematically as the double bond approaches membrane center. These changes in area per lipid are accompanied by corresponding changes in membrane thickness and ordering of the chains. Further changes are observed in the tilt angles of the chains, membrane hydration together with changes in the number of gauche conformations, and direct head group interactions. All of these effects can be associated with changes in acyl chain conformations and local effects of the double bond on the packing of the surrounding atoms.     

Phospholipid Bilayers as Molecular Models for Drug-Cell Membrana Interactions. The Case of the Antiinflamatory Drug Diclofenac

Phospholipids are amphipatic molecules with long hydrophobic acyl chains and zwitterionic polar heads which assemble into different types of molecular aggregates. The most relevant is the bilayer because of its relation with cell membranes, which are very complex entities. For this reason, simpler molecular models based on phospholipids bilayers are widely used. We have determined the bilayer structure of phospholipids located in the outer and inner monolayers of most cell membranes, and use them as molecular models to study the way different chemicals of biological interest interact with cell membranes. We present the results of our studies on the nonsteroidal anti-inflammatory drug diclofenac, from which little is known about its effects on human erythrocytes. This report presents the following evidence that diclofenac interacts with the human red cell membrane: a) X-ray diffraction and fluorescence spectroscopy of phospholipids bilayers show that diclofenac interacts with a class of lipids found in the outer moiety of the erythrocyte membrane; b) in isolated unsealed human erythrocyte membranes the drug induced a disordering effect on the acyl chains of the membrane lipid bilayer; c) in scanning electron microscopy studies on human erythrocytes it was observed that the drug induced morphological changes different from their normal biconcave shape.     

Large influence of cholesterol on solute partitioning into lipid membranes

Cholesterol plays an important role in maintaining the correct fluidity and rigidity of the plasma membrane of all animal cells, and hence, it is present in concentrations ranging from 20 to 50 mol %. Whereas the effect of cholesterol on such mechanical properties has been studied exhaustively over the last decades, the structural basis for cholesterol effects on membrane permeability is still unclear. Here we apply systematic molecular dynamics simulations to study the partitioning of solutes between water and membranes. We derive potentials of mean force for six different solutes permeating across 20 different lipid membranes containing one out of four types of phospholipids plus a cholesterol content varying from 0 to 50 mol %. Surprisingly, cholesterol decreases solute partitioning into the lipid tail region of the membranes much more strongly than expected from experiments on macroscopic membranes, suggesting that a laterally inhomogeneous cholesterol concentration and permeability may be required to explain experimental findings. The simulations indicate that the cost of breaking van der Waals interactions between the lipid tails of cholesterol-containing membranes account for the reduced partitioning rather than the surface area per phospholipid, which has been frequently suggested as a determinant for solute partitioning. The simulations further show that the partitioning is more sensitive to cholesterol (i) for larger solutes, (ii) in membranes with saturated as compared to membranes with unsaturated lipid tails, and (iii) in membranes with smaller lipid head groups.     

Structural and dynamic characterization of the interaction of the putative fusion peptide of the S2 SARS-CoV virus protein with lipid membranes

The SARS coronavirus (SARS-CoV) envelope spike (S) glycoprotein, a Class I viral fusion protein, is responsible for the fusion between the membranes of the virus and the target cell. In the present work, we report a study of the binding and interaction with model membranes of a peptide pertaining to the putative fusion domain of SARS-CoV, SARS FP, as well as the structural changes that take place in both the phospholipid and the peptide molecules upon this interaction. From fluorescence and infrared spectroscopies, the peptide ability to induce membrane leakage, aggregation and fusion, as well as its affinity toward specific phospholipids, was assessed. We demonstrate that SARS FP strongly partitions into phospholipid membranes, more specifically with those containing negatively charged phospholipids, increasing the water penetration depth and displaying membrane-activity modulated by the lipid composition of the membrane. Interestingly, peptide organization is different depending if SARS FP is in water or bound to the membrane. These data suggest that SARS FP could be involved in the merging of the viral and target cell membranes by perturbing the membrane outer leaflet phospholipids and specifically interacting with negatively charged phospholipids located in the inner leaflet.     

Sodium ion internalized within phospholipid membranes

Seven phospholipids, modified with ester groups in their hydrophobic chains, were synthesized and examined for their ability to promote sodium ion flux across vesicular membranes. It was found by 23Na NMR that only the phospholipids having short chain segments beyond their terminal ester groups catalyze sodium ion transfer by up to 2 orders of magnitude relative to a conventional phospholipid, POPC. The rates increase with the concentration of the ester-phospholipid admixed with POPC in the bilayer. More surprisingly, the rates increase with the time allowed for the vesicles to age. This was attributed to ester-phospholipid migrating in the bilayers to form domains that solubilize the sodium ion within the hydrocarbon interior of the membrane. Such membrane domains explain why shift reagent-modified NMR spectra display three 23Na signals representing sodium outside the vesicles, sodium within the vesicular water pools, and sodium within the membranes themselves.     

侧链结构对磺化聚芳醚性能及微观形貌的影响

比较了3种主链结构相同而侧链结构不同的磺化聚芳醚(SPAE)材料的性能. 分析了侧链结构对聚合物的吸水、 溶胀及质子传导行为的影响. 结果表明, 在相同的离子交换容量(IEC)条件下, 具有柔顺脂肪族侧链的聚芳醚材料具有较高的质子传导率. 其原因是由于柔顺的脂肪族侧链比刚性的芳香族侧链更易运动, 有利于侧链末端磺酸基团的聚集, 进而形成离子簇. 3种聚合物微观形貌的分析结果表明, 含柔顺侧链结构的聚合物薄膜具有更大的质子传输通道, 其结果与聚合物的宏观吸水和传导现象相吻合.     

Hollow-fiber-type pore-filling membranes made by plasma-graft polymerization for the removal of chlorinated organics from water

Hollow-fiber-type pore-filling membranes were prepared to reduce the emission of toxic chlorinated organics into the environment. These membranes can remove 1,1,2-trichloroethane (TCE) or dichloromethane (DM) from water, and concentrate them in the permeate. The pore-filling membrane can efficiently remove organics from water because of the suppression of the membrane swelling by the porous substrate matrix, and the fact that it can maintain a high solute diffusivity, because of the linear graft chains that fill the substrate pores. Laurylacrylate (LA) or n-butylacrylate (BA) grafted layers were formed inside the porous hollow-fiber substrate, and the pores were filled with the grafted chains formed from plasma-initiated graft polymerization. The hollow-fiber-type LA-grafted membranes showed extremely high separation properties: a 0.09 wt.% TCE aqueous solution was condensed to 99 wt.% TCE in the permeate. The membrane can remove TCE from a water stream, and at the same time, the membrane can purify the TCE for re-use. The membrane also showed high separation performance for an aqueous DM solution. The mass transfer resistance outside the membrane was estimated by using a concentration polarization model. When the mass transfer coefficient at the membrane and feed stream boundary layer was below 10⁻⁴ m/s, the boundary layer resistance affected the membrane performance. This needs to be taken into account when designing the membrane module and operating conditions.     

The exchange of erythrocyte membrane phospholipids with rat liver extracts in vitro.

Intact rat or human erythrocytes and their isolated (ghost) membranes were incubated with the high speed supernatant fraction of homogenates derived from 32P-labeled rat livers. Phospholipid molecules were transferred between the red cell membranes and the liver extracts, as reflected by the convergence of their specific radioactivities with time. Whereas ghosts usually approached isotopic equilibrium with the liver supernatant fraction during a few hours of incubation at 37 degrees C, the exchange of phospholipids by intact cells was no more than one-half, even after 18 hr. Phosphatidylcholine, phosphatidylethanolamine, phosphatidylserine and sphingomyelin were all exchanged in both intact cells and ghosts, albeit to different extents. (A control experiment, incubating 32P-labeled rat erythrocytes or ghosts with unlabeled rat liver extracts, also demonstrated the exchange of all four major phospholipids.) These data may signify that the phospholipids on the cytoplasmic side of the membrane of intact erythrocytes do not exchange with the phospholipids in exogenous liver extracts. If so, all four major phospholipid classes would appear to be present to some extent at both membrane surfaces. The first inference is in agreement with several other studies on this membrane, while the second inference is not.     

Cation exchange membranes by pre-irradiation grafting of styrene into FEP films. II. Properties of copolymer membranes

The structure and some physico-chemical properties of radiation grafted FEP-g-polystyrenesulfonic acid proton exchange membranes were studied as a function of the degree of grafting. The distribution of grafted polymer across the membrane thickness was obtained from microprobe measurements. It was found that for low levels of grafting (ca. 3%), polystyrene chains are located near the membrane surface only, and the interior of the membrane remains ungrafted. With the increasing degree of grafting, polystyrene chains were incorporated into the interior of the membrane as well. An almost homogeneous distribution of grafts in the membrane was obtained at a graft level of > 13%. The influence of the degree of grafting on membrane properties, such as ion exchange capacity, swelling, and specific resistivity was studied. Three different states of water, viz., freezing free, freezing bound, and nonfreezing water have been identified in noncrosslinked membranes. However, the nature and the amount of crosslinker had a profound influence on the states of water in a membrane. © 1996 John Wiley & Sons, Inc.     

Interactions between local anesthetic dibucaine and pig erythrocyte membranes as studied by proton and phosphorus-31 nuclear magnetic resonance spectroscopy.

The interactions between amine local anesthetic dibucaine and pig erythrocyte membranes have been studied by proton and phosphorus-31 nuclear magnetic resonance (1H- and 31P-NMR) spectroscopy. It was found that dibucaine, bound to the membranes, increases the mobility of the hydrophobic acyl chains of the phospholipids, but that it decreases the mobility and/or changes the structure of the polar headgroups. The interactions with peripheral membrane proteins, i.e., spectrin and actin, were found to be weak. These observations indicate that the dibucaine locates across the polar and hydrophobic areas of the lipid phase of the membranes by both electrostatic and hydrophobic interactions. It is assumed that the changes in the mobility and/or the conformation of the phospholipids residing around the Na channel protein are essential in causing anesthesia.     

Analysis of the contribution of saturated and polyunsaturated phospholipid monolayers to the binding of proteins

The binding of peripheral proteins to membranes results in different biological effects. The large diversity of membrane lipids is thought to modulate the activity of these proteins. However, information on the selective binding of peripheral proteins to membrane lipids is still largely lacking. Lipid monolayers at the air/water interface are useful model membrane systems for studying the parameters responsible for peripheral protein membrane binding. We have thus measured the maximum insertion pressure (MIP) of two proteins from the photoreceptors, Retinitis pigmentosa 2 (RP2) and recoverin, to estimate their binding to lipid monolayers. Photoreceptor membranes have the unique characteristic that more than 60% of their fatty acids are polyunsaturated, making them the most unsaturated natural membranes known to date. These membranes are also thought to contain significant amounts of saturated phospholipids. MIPs of RP2 and recoverin have thus been measured in the presence of saturated and polyunsaturated phospholipids. MIPs higher than the estimated lateral pressure of biomembranes have been obtained only with a saturated phospholipid for RP2 and with a polyunsaturated phospholipid for recoverin. A new approach was then devised to analyze these data properly. In particular, a parameter called the synergy factor allowed us to highlight the specificity of RP2 for saturated phospholipids and recoverin for polyunsaturated phospholipids as well as to demonstrate clearly the preference of RP2 for saturated phospholipids that are known to be located in microdomains.     

Synthesis of phospholipids containing perfluorooctyl group and their interfacial properties

Highly fluorinated single-chained and/or double-chained phospholipids containing the perfluorooctyl group as the terminal segment of hydrophobic chains and a phosphocholine moiety as the hydrophilic headgroup were synthesized in order to investigate the effect of fluorinated segments on the stability of phospholipid monolayers formed at the air-water interface. Judging from the equilibrium spreading pressures (π_es) of their monolayers at the air-water interface, all of the fluorinated phospholipids formed more stable monolayers than the corresponding non-fluorinated counterparts. In addition, the fluorinated double-chained phosphatidylcholine containing C-C triple bond (monoyne group) formed stable and fluid vesicle membranes in water, although the single-chained phospholipids did not form vesicle membranes but micellar solutions under the present conditions.     

Fabrication,characterization, and performance evaluation of polyethersulfone/TiO2 nanocomposite ultrafiltration membranes for produced water treatment

In the present work, development of neat and nanocomposite polyethersulfone membranes composed of TiO₂ nanoparticles is presented. Membranes are fabricated using nonsolvent phase inversion process with the objective of improving antifouling, hydrophilicity, and mechanical properties for real and synthetic produced water treatment. Membranes are characterized using scanning electron microscopy, Fourier‐transform infrared, contact angle, porosity measurement, compaction factor, nanoparticles stability, and mechanical strength. The performance of prepared membranes was also characterized using flux measurement and oil rejection. Fourier‐transform infrared spectra indicated that noncovalence bond formed between Ti and polyethersulfone chains. The contact angle results confirmed the improved hydrophilicity of nanocomposite membranes upon addition of TiO₂ nanoparticles owing to the strong interactions between fillers and water molecules. The increased water flux for nanocomposite membranes in comparison with neat ones can be due to coupling effects of improved surface hydrophilicity, higher porosity, and formation of macrovoids in the membrane structure. The membrane containing 7 wt% of TiO₂ nanoparticles was the best nanocomposite membrane because of its high oil rejection, water flux, antifouling properties, and mechanical stability. The pure water flux for this membrane was twice greater than that of neat membrane without any loss in oil rejection. The hydrophilicity and antifouling resistance against oil nominates developed nanocomposite membranes for real and synthetic produced water treatment applications with high performance and extended life span.     

两亲性梳状聚醚硅氧烷对相转化法聚偏氟乙烯多孔膜的共混改性作用研究

以聚醚链段为侧链的两亲性梳状聚醚硅氧烷(ACPS)为改性剂,研究了相转化法制备聚偏氟乙烯(PVDF)多孔膜的改性效果与机理.采用SEM、XPS、接触角、水通量等考察了ACPS对膜结构与性能的影响.研究发现,ACPS在相转化成膜过程中不流失,随着制膜液中ACPS含量的增加,相分离速度降低,膜中微孔由指状结构向蜂窝状结构发展,膜强度提高,亲水性显著提高.提出了ACPS在膜表面的富集现象和在膜中的稳定性机理和模型.结果表明,两亲性梳状聚醚硅氧烷在原理上是一类适合于相转化法制备聚合物微孔膜表面亲水化改性的有效物质.     

Reinforcing effect of bi- and tri-cyclopolyprenols on ‘primitive’ membranes made of polyprenyl phosphates

Cholesterol plays the role of membrane reinforcer in eukaryotes, whereas hopanoids play the same role in bacteria. Which components could have reinforced ‘primitive’ membranes? We describe here an efficient biomimetic synthesis of bi- and tri-cyclopolyprenols and demonstrate that these compounds reinforce the membranes of polyprenyl phosphate, which we speculated as ‘primitive’ membranes.     

Molecular dynamics simulation of swollen membrane of perfluorinated ionomer

Molecular dynamics simulations of the swollen membrane of perfluorinated ionomer, which is composed of poly(tetrafluoroethylene) backbones and perfluosulfonic pendant side chains, have been undertaken to analyze the static and dynamic properties of the water and the side chain in the membrane. The calculations were carried out for four different water contents, 5, 10, 20 and 40 wt %, at 358.15 K and 0.1 MPa. The results are summarized as follows: (1) The sulfonic acid is the unique site to which water molecules can bind, and the other sites in the pendant side chain have no bound water even at high water concentration. (2) Sulfonic acids aggregate in the short range within 4.6-7.7 A despite the electrostatic repulsion between them. In such aggregates, a water molecule bridges two sulfonic acids. (3) Pendant side chains prefer to orient perpendicular to the hydrophilic/hydrophobic interface, and long-range correlation of side chain orientations is observed at 20 and 40 wt % water uptake membranes. (4) In a low water uptake membrane, the dynamics of water is substantially restricted due to strong attractive interactions with acidic sites. In contrast, at high water content, even the water locating near the sulfonic acid is relatively mobile. The short residence time of the bound water reveals that such water can frequently exchange position with relatively free water, which locates in the center of water cluster, in highly swollen membranes.     

Construction of higher-ordered monolayer membranes derived from archaeal membrane lipid-inspired cyclic lipids with longer alkyl chains

A series of artificial cyclic lipids that mimic archaeal membrane ones has been synthesized. The structural features of these molecules include a longer cyclic framework, in which the alkyl chain length ranges from 24 to 32 in carbon number, which is longer than our first analogous molecule with 20-carbon long alkyl chains [K. Miyawaki, T. Takagi, M. Shibakami, Synlett 8 (2002) 1326]. Microscopic observation reveals that these molecules have a self-assembling ability: hydration of the lipids yields multilamellar vesicles in aqueous solution and monolayer sheets on solid supports. High-sensitivity differential scanning calorimetry (24- and 28-carbon alkyl chain lipids) indicates that (i) the alkyl chain length affects their phase behavior and (ii) the enthalpies of endothermic peaks accompanied by phase transition were considerably lower than those of their monomeric phospholipid analogs. Fluorescence polarization measurements suggest that the membranes made from the 24-carbon alkyl chain lipid have a higher polarization factor than membranes composed of DMPC and DMPC plus cholesterol. These findings imply that the cyclic lipids containing 24- and 28-carbon alkyl chain construct well-organized monolayer membranes and, in particular, that the molecular order of the 24-carbon alkyl chain lipid is higher than that of bilayer membranes in the liquid-ordered phase.     

Synthesis and properties of polyimide ionomers containing sulfoalkoxy and fluorenyl groups

A series of sulfopropylated and sulfobutylated polyimide copolymers containing fluorenyl groups, SPI‐4, were synthesized to investigate the effect of alkyl side chains on the properties (stability, mechanical strength, water uptake, and proton conductivity) of the polymimide electrolyte membranes. SPI‐4 showed much better hydrolytic stability (in 10% MeOH aq at 100 °C) than the main chain sulfonated polyimide, SPI‐1. Tough, flexible, and ductile membranes were obtained from these copolymers. At high relative humidity all the SPI‐4 membranes showed high mechanical properties (>34 MPa of the maximum stress) and proton conductivity (>0.1 Scm^?1). These properties are comparable to or even better than those of the perfluorosulfonic acid ionomer (Nafion 112). The new polyimide ionomers have proved to be a possible candidate as polymer electrolyte membrane for PEFCs and DMFCs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4439–4445, 2005     

Electrostatic properties of membrane lipids coupled to metarhodopsin II formation in visual transduction

Changes in lipid composition have recently been shown to exert appreciable influences on the activities of membrane-bound proteins and peptides. We tested the hypothesis that the conformational states of rhodopsin linked to visual signal transduction are related to biophysical properties of the membrane lipid bilayer. For bovine rhodopsin, the meta I-meta II conformational transition was studied in egg phosphatidylcholine (PC) recombinants versus the native rod outer segment (ROS) membranes by means of flash photolysis. Formation of metarhodopsin II was observed by the change in absorbance at 478 nm after a single actinic flash was delivered to the sample. The meta I/meta II ratio was investigated as a function of both temperature and pH. The data clearly demonstrated thermodynamic reversibility of the transition for both the egg PC recombinants and the native ROS membranes. A significant shift of the apparent pK(a) for the acid-base equilibrium to lower values was evident in the egg PC recombinant, with little meta II produced under physiological conditions. Calculations of the membrane surface pH using a Poisson-Boltzmann model suggested the free energies of the meta I and meta II states were significantly affected by electrostatic properties of the bilayer lipids. In the ROS membranes, phosphatidylserine (PS) is needed for full formation of meta II, in combination with phosphatidylethanolamine (PE) and polyunsaturated docosahexaenoic acid (DHA; 22:6omega3) chains. We propose that the PS surface potential leads to an accumulation of hydronium ions, H(3)O(+), in the electrical double layer, which drive the reaction together with the large negative spontaneous curvature (H(0)) conferred by PE plus DHA chains. The elastic stress/strain of the bilayer arises from an interplay of the approximately zero H(0) from PS and the negative H(0) due to the PE headgroups and polyunsaturated chains. The lipid influences are further explained in terms of matching of the bilayer spontaneous curvature to the curvature at the lipid/rhodopsin interface, as formulated by the Helfrich bending energy. These new findings guide current ideas as to how bilayer properties govern the conformational energetics of integral membrane proteins. Moreover, they yield knowledge of how membrane lipid-protein interactions involving acidic phospholipids such as PS and neutral polyunsaturated DHA chains are implicated in key biological functions such as vision.