Rhodium(0) nanoparticles supported on nanocrystalline hydroxyapatite: highly effective catalytic system for the solvent-free hydrogenation of aromatics at room temperature

The hydrogenation of aromatics under mild conditions remains a challenge in the fields of synthetic and petroleum chemistry. Described herein is a new catalytic material that shows excellent catalytic performance in terms of activity, selectivity, and reusability in the hydrogenation of aromatics in solvent-free systems under mild conditions. The catalyst, consisting of rhodium nanoparticles supported on nanocrystalline hydroxyapatite, can quantitatively hydrogenate neat benzene to cyclohexane with exceptionally high rates (initial TOF > 10(3) h(-1)) at 298 K and 3 bars of initial H(2) pressure. This new material maintains its inherent catalytic activity after several reuses. Importantly, catalyst preparation does not require elaborate procedures because the active metal nanoparticles are readily formed from the in situ reduction of Rh(3+)-exchanged hydroxyapatite while submerged in the aromatic solvent at room temperature under 3 bars of H(2) pressure.     

阳离子表面活性剂存在下水/有机两相体系中双环戊二烯氢甲酰化

研究了在阳离子表面活性剂存在下水/有机两相中水溶性铑配合物RhCI(CO)(TPPTS)2(TPPTS:P(m-C6H4SO3Na)3)催化双环戊二烯氢甲酰化反应,考察了反应温度、催化剂浓度、不同水溶性膦配体TPPTS和TPPDS(C5H5P(m-C6H4SO3Na)2),以及表面活性剂结构对催化反应的影响.结果表明,...     

水/有机两相体系中单萜烯烃的氢甲酰化反应

考察了水溶性铑膦络合物RhCl(CO)(TPPTS)2(TPPTS为间-三苯基膦三磺酸钠)在水/有机两相体系中对不同单萜烯的氢甲酰化反应的催化性能.结果表明,添加表面活性剂对催化活性影响很大.在8.0 MPa,100℃的条件下,该催化体系对萜烯氢甲酰化反应具有较好的催化活性,月桂烯、莰烯和艹宁烯的转化率可分别达到92%,72%和86%.反应完成后,含水溶性铑膦络合物的水溶液与含产物的有机相分离方便,催化剂重复使用8次,其活性和选择性均未明显下降,易于实现催化剂的循环使用.     

A facile one-step synthesis of polymer supported rhodium nanoparticles in organic medium and their catalytic performance in the dehydrogenation of ammonia-borane

A new type of supported rhodium nanoparticles were reproducibly prepared from N(2)H(4)BH(3) reduction of [Rh(μ-Cl)(1,5-cod)](2) without using any solid support and pre-treatment technique. Their characterization shows the formation of well dispersed rhodium(0) nanoparticles within the framework of a polyaminoborane based polymeric support. These new rhodium(0) nanoparticles were found to be the most active supported catalyst in the catalytic dehydrogenation of ammonia-borane in water at room temperature.     

Hydrogenation of arenes over silica-supported catalysts that combine a grafted rhodium complex and palladium nanoparticles: evidence for substrate activation on Rh(single-site)-Pd(metal) moieties

The complex Rh(cod)(sulfos) (Rh(I); sulfos = (-)O(3)S(C(6)H(4))CH(2)C(CH(2)PPh(2))(3); cod = cycloocta-1,5-diene), either free or supported on silica, does not catalyze the hydrogenation of benzene in either homogeneous or heterogeneous phase. However, when silica contains supported Pd metal nanoparticles (Pd(0)/SiO(2)), a hybrid catalyst (Rh(I)-Pd(0)/SiO(2)) is formed that hydrogenates benzene 4 times faster than does Pd(0)/SiO(2) alone. EXAFS and DRIFT measurements of in situ and ex situ prepared samples, batch catalytic reactions under different conditions, deuterium labeling experiments, and model organometallic studies, taken together, have shown that the rhodium single sites and the palladium nanoparticles cooperate with each other in promoting the hydrogenation of benzene through the formation of a unique entity throughout the catalytic cycle. Besides decreasing the extent of cyclohexa-1,3-diene disproportionation at palladium, the combined action of the two metals activates the arene so as to allow the rhodium sites to enter the catalytic cycle and speed up the overall hydrogenation process by rapidly reducing benzene to cyclohexa-1,3-diene.     

Stabilisation of water-soluble platinum nanoparticles by phosphonic acid derivatives

Sodium 2-(diphenylphosphino)ethyl phosphonate (1) was investigated as a stabilising agent for platinum nanoparticles (Pt-NPs) in aqueous solution. This phosphino phosphonate is known to stabilise rhodium nanoparticles (NPs) in water. Here we report that in the case of Pt-NPs this ligand is indirectly involved in the stabilisation mechanism and the actual stabilisation agent is the platinum complex Na(2)[Pt(1)(2)] (2). The reduction of platinum(II) salts in the presence of the phosphonates 1, 2, sodium 2-(diphenylphosphoryl)ethyl phosphonate (3) and 3,3,3-triphenylpropyl phosphonate (4) leads to stable platinum NPs with a remarkably narrow particle size distribution. These platinum NPs show high catalytic activity in the hydrogenation of 1-hexene and 1-chloro-3-nitrobenzene under biphasic as well as heterogeneous (supported on charcoal) conditions. The activity of the supported NPs was 30 times higher than the commercially available catalyst Pt(0) EnCat?. Furthermore, the single-crystal X-ray structures of (1)(MeOH)(2)(H(2)O)(2), (3)(H(2)O)(4), and (4)(2)(H(2)O)(17) have been determined.     

Novel asymmetric michael addition of alpha-cyanopropionates to acrolein by the use of a bis(oxazolinyl)phenylstannane-derived rhodium(III) complex as a chiral Lewis acid catalyst

The rhodium complex prepared in situ by simply mixing [[RhCl(c-octene)2]2] and [(Phebox)SnMe3] (1) (Phebox = 2,6-bis(oxazolinyl)phenyl) was found to serve as an efficient catalyst for the asymmetric Michael addition of alpha-cyanopropionates (4) to acrolein under mild and neutral conditions. In the present catalytic system, both the temperature of catalyst preparation and the order of the addition of the substrates were very important for the catalytic efficiency and enantioselectivity. Detailed mechanistic studies of this catalytic system revealed that the [(Phebox)RhIII(SnMe3)Cl] complex (9), generated by oxidative addition of [[RhCl(c-octene)2]2] to 1, is an active catalyst and the turnover number (TON) of the present actual catalyst existing in a reaction mixture is greater than 10,000. The obtained (R) stereochemistry of the Michael adducts 5 can be explained by N-bonded enol intermediates C', which are formed by enolization of 4 bound to the Lewis acidic rhodium complex 9. We also found that the active catalyst 9 gradually decomposed in the presence of the remaining [[RhCl(c-octene)2]2] in the reaction mixture to form the catalytically nonactive [(Phebox)RhCl2] fragment A, whose structure was characterized by an X-ray crystallographic study after converting to the tBuNC complex 10.     

用于温控相转移纳米铑催化反应的水/有机两相新体系

在水/1-戊醇两相体系中实现了以温控配体Ph2P(CH2CH2O)22CH3为稳定剂的Rh纳米催化剂的温控相转移功能,并将其应用于烯烃催化加氢反应,在优化的反应条件下,环己烯的转化率和环己烷的收率均为99%.通过简单的相分离即可将催化剂从产物中分离出来,重复使用8次,其活性保持不变.     

Isobutene hydroformylation in catalytic systems based on rhodium compounds and polyelectrolytes

The catalytic properties of water-soluble systems based on rhodium complexes and polyelectrolytes in isobutene hydroformylation were studied. All of the catalytic systems exhibited an unexpectedly high activity under the conditions where homogeneous hydroformylation virtually did not occur in the presence of conventional rhodium catalysts. A stable catalytic system based on acacRh(CO)₂-PEG complex was proposed, allowing isobutene hydroformylation to be performed with a high activity under mild conditions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 705–707, April, 1999.     

Photocatalytic hydrogen evolution from carbon-neutral oxalate with 2-phenyl-4-(1-naphthyl)quinolinium ion and metal nanoparticles

Photocatalytic hydrogen evolution has been made possible by using oxalate as a carbon-neutral electron source, metal nanoparticles as hydrogen-evolution catalysts and the 2-phenyl-4-(1-naphthyl)quinolinium ion (QuPh(+)-NA), which forms the long-lived electron-transfer state upon photoexcitation, as a photocatalyst. The hydrogen evolution was conducted in a deaerated mixed solution of an aqueous buffer and acetonitrile (MeCN) [1:1 (v/v)] by photoirradiation (λ > 340 nm). The gas evolved during the photocatalytic reaction contained H(2) and CO(2) in a molar ratio of 1:2, indicating that oxalate acts as a two-electron donor. The hydrogen yield based on the amount of oxalate reached more than 80% under pH conditions higher than 6. Ni and Ru nanoparticles as well as Pt nanoparticles act as efficient hydrogen-evolution catalysts in the photocatalytic hydrogen evolution. The photocatalyst for hydrogen evolution can be used several times without significant deactivation of the catalytic activity. Nanosecond laser flash photolysis measurements have revealed that electron transfer from oxalate to the photogenerated QuPh˙-NA˙(+), which forms a π-dimer radical cation with QuPh(+)-NA [(QuPh˙-NA˙(+))(QuPh(+)-NA)], occurs followed by subsequent electron transfer from QuPh˙-NA to the hydrogen-evolution catalyst in the photocatalytic hydrogen evolution. Oxalate acts as an efficient electron source under a wide range of reaction conditions.     

Facile synthesis and catalytic activity of MoS(2)/TiO(2) by a photodeposition-based technique and its oxidized derivative MoO(3)/TiO(2) with a unique photochromism

UV-light irradiation to TiO(2) in an aqueous ethanol solution of (NH(4))(2)MoS(4) under deaerated conditions has yielded molybdenum(IV) sulfide nanoparticles on a TiO(2) surface (MoS(2)/TiO(2)) to be transformed into molybdenum(VI) oxide species highly dispersed at a molecular level by a subsequent heating at 773K in air (m-MoO(3)/TiO(2)). In HCOOH aqueous solutions, the MoS(2)/TiO(2) system exhibits a high level of photocatalytic activity for H(2) generation, while the m-MoO(3)/TiO(2) system shows unique photochromism.     

Aqueous biphasic hydroformylation of higher alkenes and highly efficient catalyst recycling in the presence of a polar low boiling solvent

The hydroformylation of higher alkenes under aqueous biphasic reaction conditions with a rhodium catalyst derived from BISBIS (sodium salt of sulfonated 2,2′-bis (diphenylphosphinomethyl)-1,1′-biphenyl) in the presence of a polar low boiling point solvent was studied. The addition of ethanol greatly accelerated hydroformylation, such that the turnover frequency (defined as the moles of converted alkene per mole of Rh per hour) and the selectivity for linear aldehyde were up to 2095 h^?1 and 99 %, respectively. The catalytic system could be recycled for at least five runs without significant loss of activity in the aqueous biphasic hydroformylation of 1-octene; the rhodium content leaching in product mixtures detected by inductively coupled plasma atomic emission spectroscopy was < 0.1 ppm.     

One-pot synthesis of colloidally robust rhodium(0) nanoparticles and their catalytic activity in the dehydrogenation of ammonia-borane for chemical hydrogen storage

Rhodium(0) nanoparticles stabilized by tert-butylammonium octanoate were prepared reproducibly from the reduction of rhodium(II) octanoate with tert-butylamine-borane in toluene at room temperature and characterized by ICP-OES, TEM, HRTEM, STEM, EDX, XRD, XPS, FTIR, UV-vis, (11)B, (13)C and (1)H NMR spectroscopy and elemental analysis. These new rhodium(0) nanoparticles show unprecedented catalytic activity, lifetime and reusability as a heterogeneous catalyst in room temperature dehydrogenation of ammonia-borane, which is under significant investigation as a potential hydrogen storage material.     

Establishing the mechanism of Rh-catalysed activation of O2 by H2

Reductive activation of O(2) by H(2) with rhodium terpyridine complexes in H(2)O and CH(3)CN is described and the mechanism is fully elucidated. The rhodium complex extracts electrons from H(2) and reductively activates O(2) to form a peroxo active intermediate. This intermediate is able to oxidise triphenyl phosphine to triphenyl phosphine oxide. A model system constructed in CH(3)CN provides isolable analogues of catalytic intermediates in H(2)O, allowing a detailed look at each step in the catalytic cycle.     

Rhodium-catalyzed cycloisomerization of N-propargyl enamine derivatives

A novel rhodium-catalyzed cycloisomerization has been developed which converts N-propargyl enamine derivatives to their isomeric six-membered azacycles in good yields under mild reaction conditions. The [Rh(C2H2)2Cl]2/P(4-F-C6H4)3 catalyst, in combination with DABCO as a base and DMF as a solvent, was found to be effective in promoting the cyclization process. The reaction is proposed to proceed through an intramolecular nucleophilic attack of the enamine to the rhodium vinylidene followed by a base-mediated proton-shunting process. The base was found to play a crucial role in the transformation, indicating the proton migration to be an integral component of the catalytic cycle. An aprotic polar solvent was required for high conversion, which points to the intermediacy of a zwitterionic intermediate. The present reaction should prove useful for the efficient synthesis of various six-membered azacycles that are important structural motifs of many natural isolates and medicinal agents.     

Rh nanoparticles stabilized by PEG-substituted triphenyl-phosphine:A highly active and recyclable catalyst for aqueous biphasic hydrogenation of benzene

<正>Rh nanoparticles stabilized by PEG-substituted triphenyl-phosphine(PETPP,P[C_6H_4-p-(OCH_2CH_2)_nOH]_3) combining double stabilization effects demonstrated high activity and good recyclability in aqueous biphasic hydrogenation of benzene.The value of turnover frequency(TOF) was 3333 h~(-1).Furthermore,the rhodium nanoparticle catalyst could be easily recycled for five times without loss in activity.     

Amine‐bridged bis(phenol) ligands for efficient Pd‐catalyzed aqueous C‐C coupling reactions

The influence of ring size ( 5 or 6 ), chain length ( 1 , 2 or 3 ) and bulkiness of N‐aryl substituents in amine‐bridged bis(phenol) ligands ( 1 , 2 , 3 ) on palladium‐catalyzed aqueous C‐C coupling reactions were revealed. The homocoupling of arylboronic acid can be completed in neat water with the aid of a catalytic amount of p‐toluenesulfonyl chloride (TsCl) in a very short time under anaerobic or aerobic conditions. Interestingly, the same catalytic system was efficient for Suzuki–Miyaura reaction in aqueous acetone under aerobic conditions in the absence of TsCl. The crystal structures of ligand 1 and three unsymmetrical fluorine‐substituted biaryl derivatives were also reported. Copyright © 2013 John Wiley & Sons, Ltd.     

Amphiphilic ionic liquid stabilizing palladium nanoparticles for highly efficient catalytic hydrogenation

The highly water-soluble palladium nanoparticles (NPs) were synthesized by using the amphiphilic poly(ethylene glycol)-functionalized dicationic imidazolium-based ionic liquid (C(12)Im-PEG IL) as a stabilizing agent. The aqueous dispersed palladium NPs in the range of 1.9 ± 0.3 nm were observed by transmission electron microscopy (TEM). The physicochemical properties of C(12)Im-PEG IL in aqueous phase have been characterized by electrical conductivity, surface tension and dynamic light scattering (DLS) measurements. It was demonstrated that the amphiphilic ionic liquid can form micelles above its critical micelle concentration (CMC) in aqueous solution and the micelles played a crucial role in stabilizing the palladium NPs and thus promoted catalytic hydrogenation. Furthermore, the dicationic ionic liquid can also act as a gemini surfactant and generated emulsion between hydrophobic substrates and the catalytic aqueous phase during the reaction. The aqueous dispersed palladium NPs showed efficient activity for the catalytic hydrogenation of various substrates under very mild conditions and the stabilizing Pd(0) nanoparticles (NPs) can be reused at least eight times with complete conservation of activity.     

State of supported rhodium nanoparticles for methane catalytic partial oxidation (CPO): FT-IR studies

The effect of pretreatments as well as of rhodium precursor and of the support over the morphology of Rh nanoparticles were investigated by Fourier transform infrared (FT-IR) spectroscopy of adsorbed CO. Over a Rh/alumina catalyst, both metallic Rh particles, characterized by IR bands in the range 2070-2060 cm-1 and 1820-1850 cm-1, and highly dispersed rhodium species, characterized by symmetric and asymmetric stretching bands of RhI(CO)2 gem-dicarbonyl species, are present. Their relative amount changes following pretreatments with gaseous mixtures, representative of the catalytic partial oxidation (CPO) reaction process. The Rh metal particle fraction decreases with respect to the Rh highly dispersed fraction in the order CO approximately CO/H2 > CH4/H2O, CH4/O2 > CH4 > H2. The metal particle dimensions decrease in the order CH4/O2 > H2 > CH4/H2O > CO > CO/H2. Grafting from a carbonyl rhodium complex also increases the amount and the dimensions of Rh0 particles at the catalyst surface. Increasing the ratio (extended rhodium metal particles/highly dispersed Rh species) allows a shorter conditioning process. The surface reconstruction phenomena going on during catalytic activity are related to this effect.     

Nano indium oxide: an efficient catalyst for the synthesis of 1,2-disubstituted benzimidazoles in aqueous media

Synthesis of 1,2-disubstituted benzimidazoles has been developed by the condensation of diamine with aldehydes using nano In₂O₃ as an efficient catalyst under mild reaction conditions in aqueous media. The procedure is applicable to aryl, aliphatic, heteroaryl aldehydes. In₂O₃ nanoparticles are recyclable without the loss of significant catalytic activity.