低损宽频高双折射太赫兹光子带隙光纤

设计了一种低损耗、宽频段、高双折射太赫兹光子带隙光纤,呈三角晶格排列的亚波长空气孔包层实现了带隙的局域作用.利用全矢量有限元法对光纤的双折射及损耗特性进行了理论分析.结果表明,在大约0.3 THz的宽频范围内,类矩形纤芯太赫兹光子带隙光纤的损耗小于0.009 cm^-1,相双折射在10^-3数量级,群双折射可达10^-2数量级. 关键词： 太赫兹 太赫兹波导 光子晶体光纤 双折射     

Research on terahertz photonic crystal fiber characteristics with high birefringence

A new high birefringence photonic crystal fiber is proposed within the terahertz frequency region. It has two types of claddings, the inner is composed of six ellipse air holes arranged in a honeycomb array and the outer surrounded by circle holes. By using the full vector finite element method with anisotropic perfectly matched layers absorption boundary condition, the birefringence, chromatic dispersion and confinement loss of the fundamental mode are evaluated. The results show that the birefringence can achieve 10⁻³ when the wavelength increases from 600 μm to 900 μm. This structure will provide some reference value for the designing of high birefringence terahertz photonic crystal fiber.     

V型高双折射光子晶体光纤超连续谱产生的实验研究

高非线性高双折射光子晶体光纤是超连续谱产生的最有效介质之一, 因此本文选取V型光子晶体光纤作为研究对象. 通过多极理论数值模拟的结果, 确定V型光纤具有高双折射、高非线性等特性. 通过实验手段, 发现入射光中心波长和光纤的双折射效应对产生的超连续谱有很大的影响: 当入射光波长处于光子晶体光纤大的反常色散区时, 脉冲相对展得比较宽, 长轴要比短轴方向的超连续谱更宽, 频谱成分更加丰富. 在同一波长下光偏振方向越接近45°时, 超连续谱谱宽范围越大. 随着入射脉冲功率的增加, 超连续谱展得越宽, 但是当功率比较大时会达到功率饱和. 关键词： 光子晶体光纤 高双折射 多极理论 超连续谱     

一种新型高双折射光子晶体光纤

提出了一种新的高双折射光子晶体光纤结构.应用全矢量频域有限差分方法所做的数值分析表明：该结构光纤基模的两个正交偏振态不再简并，其模式呈现很强的线偏振特性,并且模式双折射与结构参数设置有密切关系.通过选择合适的结构参数，可以使之达到10^-2量级，比传统的D型和熊猫型保偏光纤高出2个数量级.合理设计光纤包层的几何结构，可以取得理想的色散效果.这种结构的光子晶体光纤可用于制作具有适当色散特性或偏振特性的保偏光纤及相关光纤器件. 关键词： 光子晶体光纤 模式双折射 偏振特性 频域有限差分法     

V形高双折射光子晶体光纤特性研究

本文基于全矢量有限元法,设计了一种V形结构高双折射光子晶体光纤,数值分析结果表明:当光纤的包层孔间距Λ为1.0 μm,包层大空气孔D和小空气孔d分别为0.95 μm,0.7 μm时,在波长为1.55 μm处,该光纤的双折射度B达到1.225×10^-2,比传统光纤高约两个数量级. 另外,分别在可见光和近红外波段出现了两个零色散波长,使钛宝石飞秒激光器工作波段(700—980 nm) 处于光纤的反常色散区,为新颖的光子晶体 关键词： 光子晶体光纤 高双折射 有限元法 V形结构     

Mid-infrared dual-cladding photonic crystal fiber with high birefringence and high nonlinearity

Optical Review - We propose two mid-infrared photonic crystal fibers with an elliptical As2S3 core and a dual-cladding structure with high birefringence and high nonlinearity. The cladding filling...     

Hollow-core photonic quasicrystal fiber with high birefringence and ultra-low nonlinearity

A hollow-core fiber based on photonic quasicrystal arrays is theoretically proposed for high-quality light wave propagation with high polarization maintaining performance and low nonlinearity.This fiber,called hollow-core photonic quasicrystal fiber(HC-PQF),can simultaneously realize a high birefringence that reaches 1.345×10^-2 and a small nonlinear coefficient of 1.63×10^-3 W^-1·km^-1 at a communication wavelength of 1.55μm due to the air-filled core and unique quasiperiodic fiber structure.To further demonstrate the controllability of the nonlinear coefficient and the application of sensor and polarization-maintaining fiber,the nonlinearity is investigated by filling different inert gases in the fiber core while the birefringence keeps a high order of 10-2.In the wavelength rangeλ∈[1.53μm,1.57μm],the dispersion is near zero and flattened.The HC-PQF is expected to be used for applications in optical communication,high power pulse transmission,polarization beam splitters,etc.     

高功率光子晶体光纤放大器实验研究

利用掺Yb³⁺的光子晶体光纤作为光纤放大器的增益介质,采用反向抽运方式,分别从理论和实验方面研究了不同信号的增益特性,在信号光功率为6W,抽运光功率为160W时,获得了104W的输出功率.实验发现,当抽运功率大于一定值时,放大器输出会有一定的不稳定性,并影响输出功率的进一步提高. 关键词： 光子晶体光纤 光纤放大器 反向抽运 高功率     

A polymer photonic crystal fiber with high and flattened birefringence

A novel high birefringence polymer photonic crystal fiber (PCF) is proposed in this work. This PCF is composed of a polymer core and a cladding with elliptical air holes and squeezed triangular lattice. The high birefringence is introduced on the combined effect of elliptical air holes and the squeezed lattice. Our numerical results based on the supercell lattice method indicate that the birefringence can reach as high as 0.0018 at 650 nm wavelength with a properly designed cladding structure. We also analyze the dependence of the birefringence on structure parameters. And we design a PCF that has high and flattened birefringence.     

谐振式光子带隙光纤陀螺一体化方案

实现了使用光子带隙光纤的一体化谐振式光纤陀螺方案,设计并制作了谐振腔中基于微光学结构的耦合器。实验测得制作的谐振腔清晰度为3.7。搭建了基于该谐振腔的陀螺系统,并对其主、次偏振态的谐振曲线进行了实际测量。实验结果测得该系统60 s零漂为2.45 ()/s,及1 h长期稳定性为7.11 ()/s。同时,实现了对应陀螺输出50 ()/s（积分时间10 s）及100 ()/s（积分时间10 s）的模拟转速实验,验证了该陀螺系统的Sagnac效应。分析得到耦合损耗是影响该陀螺系统性能的主要因素。验证了该谐振腔结构具有应用于陀螺系统的可行性,为谐振式光纤陀螺性能进一步提高提供了参考。     

谐振式光子带隙光纤陀螺一体化方案

实现了使用光子带隙光纤的一体化谐振式光纤陀螺方案,设计并制作了谐振腔中基于微光学结构的耦合器。实验测得制作的谐振腔清晰度为3.7。搭建了基于该谐振腔的陀螺系统,并对其主、次偏振态的谐振曲线进行了实际测量。实验结果测得该系统60 s零漂为2.45 ()/s,及1 h长期稳定性为7.11 ()/s。同时,实现了对应陀螺输出50 ()/s（积分时间10 s）及100 ()/s（积分时间10 s）的模拟转速实验,验证了该陀螺系统的Sagnac效应。分析得到耦合损耗是影响该陀螺系统性能的主要因素。验证了该谐振腔结构具有应用于陀螺系统的可行性,为谐振式光纤陀螺性能进一步提高提供了参考。     

光子晶体光纤放大器增益特性的实验研究

 采用掺Yb³⁺双包层光子晶体光纤作为放大器的增益介质,在双端泵浦方式下,理论并实验研究了不同信号光时放大器的增益特性。在双端泵浦方式下,泵浦总功率为150.2 W、信号光功率为6 W时,获得了72 W的功率输出,斜率效率达到了60%。实验发现当泵浦总功率超过一定值时,由光纤端面反射形成的振荡腔引起放大器寄生振荡,并由于各种非线性效应出现了自脉动现象,影响了输出功率的进一步提高。     

Silicon nano crystal filled ellipse core based quasi photonic crystal fiber with birefringence and very high nonlinearity

In this paper, we have proposed a new type of quasi photonic crystal fiber (PCF) with a silicon nano crystal core. This structure can be used to sense aqueous analysis over a wavelength range of 1.00?µm to 3.00?µm. The properties of this structure are simulated using the vector-finite element method (VFEM) employing a boundary condition. The proposed model provides a significant effect of birefringence and a very high nonlinear coefficient for two different fundamental modes, which are obtained by adjusting the size of the silicon nano crystal filled ellipse core. This provides a high nonlinearity of 4.2?×?10⁵ W^?1Km^?1 and a birefringence of ? 3.2?×?10^?1 at the wavelengths 1.00?µm and 3.00?µm, respectively. Some others properties, such as the effective area, scattering loss, confinement loss, numerical aperture (NA)and power fraction are also analyzed to measure the performance of this structure. The proposed model is useful for sensing and biomedical imaging applications. The proposed structure may also find extensive applications in optical communication and sensor systems.     

Analysis of high birefringence photonic crystal fiber with octagonal and squarely lattice

Aiming at the requirement of high birefringence, a new kind of photonic crystal fiber (PCF) with octagonal and squarely lattice is proposed. In this structure, squarely lattices are added in the inner layer to obtain high birefringence. Birefringence and dispersion as a function of wavelength and size of PCF are analyzed by using Finite Element Method (FEM). Simulation results show that this kind of PCF exhibits high birefringence with a magnitude of 10^?3, and one zero dispersion point is obtained simultaneously. In addition, the characteristics of PCF can be tuned by changing the size of fiber.     

用于液体传感的高双折射新型光子晶体光纤结构

提出一种用于液体传感的光子晶体光纤的结构和设计方法。将六边形光子晶体光纤的纤芯区域设计成2个椭圆空气孔,分别填充水和乙醇,进而比较两种光子晶体光纤结构的传播特性。采用全矢量有限元法对所设计光子晶体光纤结构的双折射、相对灵敏度、限制损耗、非线性系数进行数值分析,对光纤各项参数的优化及纤芯椭圆结构参数进行调整,结果表明:当椭圆率为0.6时,纤芯填充乙醇的光子晶体光纤PCF2在波长1.55 nm处相对敏感度可达到72.506 7%,同时限制损耗可以降至10?8级。所设计的模型可用于传感和生物传感研究及应用。     

高功率光子晶体光纤激光器实验研究

 从光纤热传导方程出发,研究了不同泵浦光吸收系数对光纤激光器沿光纤长度方向温度分布的影响。结果表明,低吸收系数光纤泵浦端温度相对较低,分布较为平缓,有效减缓光纤的热损伤。根据理论分析结果,实验中选择了吸收系数为1.45 dB/m的掺Yb³⁺双包层光子晶体光纤作为增益介质,在泵浦光功率为560 W时,获得了428.5 W的高功率单模连续输出,斜率效率为76.5%,光束质量因子M²<1.2。由于泵浦端光纤温度较高,实验中对光纤两端进行了主动冷却,并且在离光纤端面约25 cm处的光纤表面温度进行实时测量,结果发现随着泵浦光功率的增加,光纤表面温度均匀增长,最高温度为310 K,温度正常。     

高功率光子晶体光纤激光器实验研究

从光纤热传导方程出发,研究了不同泵浦光吸收系数对光纤激光器沿光纤长度方向温度分布的影响。结果表明,低吸收系数光纤泵浦端温度相对较低,分布较为平缓,有效减缓光纤的热损伤。根据理论分析结果,实验中选择了吸收系数为1.45 dB/m的掺Yb3+双包层光子晶体光纤作为增益介质,在泵浦光功率为560 W时,获得了428.5 W的高功率单模连续输出,斜率效率为76.5%,光束质量因子M2<1.2。由于泵浦端光纤温度较高,实验中对光纤两端进行了主动冷却,并且在离光纤端面约25 cm处的光纤表面温度进行实时测量,结果发现随着泵浦光功率的增加,光纤表面温度均匀增长,最高温度为310 K,温度正常。     

Coupling characteristics of high birefringence dual-core As2S3 rectangular lattice photonic crystal fiber

A type of As2S3 chalcogenide glass mid-infrared dual-core photonic crystal fiber has been proposed.The dualcore photonic crystal fiber(PCF) consists of two asymmetric cores.The high polarization property and the coupling characteristics have been studied by using the finite element method and mode coupling theory.Numerical results show that the birefringence at wavelength λ = 10 μm is up to 0.01386 and the coupling length can reach wavelength λ = 5 μm,261 μm and 271.44 μm for x-polarized mode and y-polarized mode,respectively.It demonstrates that a 6.786-mm-long fiber can exhibit an extinction ratio of better than 10 dB and a bandwidth of 180 nm.     

双芯高双折射光子晶体光纤耦合特性研究

设计了一种双芯高双折射光子晶体光纤,采用多极法（multipole method）和光纤的模式耦合理论研究了光纤的双折射、耦合长度以及色散特性.数值研究发现,对于空气孔节距 Λ=1.2　μm,空气孔直径d=1.0　μm的光纤,在1.55　μm处双折射度为1.24×10^-2;对应x偏振模的耦合长度为21.6　μm,对应y偏振模的耦合长度为24.3　μm. 这种具有高保偏度和极短耦合长度的双芯光子晶体光纤对于微型光子器件的研制具有重 关键词： 光子晶体光纤 双芯 双折射 耦合长度     

微小空气孔传光的光子晶体光纤研究

利用有限元方法对纤芯中心带有一个微小空气孔的光子晶体光纤进行了分析,得到了其模场分布、损耗及色散特性随光纤结构参数及波长的变化规律.根据光的衍射原理及光子晶体光纤的传输特性,对空气孔传光的物理本质进行了解释.得到了微小空气孔低损耗、高强度、单模传输时,光子晶体光纤结构参数及波长的取值范围.设计出了一种优化的光子晶体光纤结构,其模场很好地集中在纤芯微小空气孔中,限制损耗α=5.9×10^-5dB/km,为微小空气孔传光的光子晶体光纤设计及制备提供了理论指导.光在空气孔中高强度、长距离传输,为光与物质相互作用及非线性光纤光学提供了新的条件.