This study reports the structural transition of electrospun poly(ε‐caprolactone) (PCL)/poly[(propylmethacryl‐heptaisobutyl‐polyhedral oligomeric silsesquioxane)‐co‐(methyl methacrylate)] (POSS‐MMA) blends, from PCL‐rich fibers, to bicontinuous PCL core/POSS‐MMA shell fibers, to POSS‐MMA‐rich fibers with a discontinuous PCL inner phase. A ternary phase diagram depicting the electrospinnability of PCL/POSS‐MMA solutions is constructed by evaluating the morphological features of fibers electrospun from solutions with various concentrations and PCL/POSS‐MMA blend ratios. X‐ray diffraction, Raman spectroscopy, and differential scanning calorimetry are further used to characterize the electrospun PCL/POSS‐MMA hybrid fibers. These physicochemical characterization results are thoroughly discussed to understand the internal structures of the hybrid fibers, which are directly correlated to the phase separation behavior of the electrospun solutions. The current study provides further insight into the complex phase behavior of POSS‐copolymer‐based systems, which hold great potential for a broad spectrum of biomedical applications.
In this study, a three layered poly (ε‐caprolactone) (PCL) graft (tPCL) was fabricated by electrospinning PCL and electrospraying poly (ethylene oxide) (PEO), which has a thin dense inner layer, a loose middle layer, and a dense outer layer. Regular PCL grafts (rPCL) with only a dense layer were used as control. In vivo evaluation was performed in rabbit carotid artery. Enhanced cell infiltration, rapid regeneration of endothelium and smooth muscle layers, and increased elastin deposition were observed within the tPCL graft wall. After 3 months, tPCL grafts showed faster PCL degradation than the rPCL grafts. Infiltrated macrophages in the tPCL grafts secreted higher level of monocyte chemoattractant protein‐1 (MCP‐1) and vascular endothelial growth factor (VEGF) which enhanced vascular regeneration. In conclusion, the tPCL graft may be a useful vascular prosthesis and worth for further investigation.
Reactive oxygen species (ROS) play important roles in cell signaling pathways, while increased production of ROS may disrupt cellular homeostasis, giving rise to oxidative stress and a series of diseases. Utilizing these cell‐generated species as triggers for selective tuning polymer structures and properties represents a promising methodology for disease diagnosis and treatment. Recently, significant progress has been made in fabricating biomaterials including nanoparticles and macroscopic networks to interact with this dynamic physiological condition. These ROS‐responsive platforms have shown potential in a range of biomedical applications, such as cancer targeted drug delivery systems, cell therapy platforms for inflammation related disease, and so on.
Biosensing is an important and rapidly developing field, with numerous potential applications in health care, food processing, and environmental control. Polymer–graphene nanocomposites aim to leverage the unique, attractive properties of graphene by combining them with those of a polymer matrix. Molecular imprinted polymers, in particular, offer the promise of artificial biorecognition elements. A variety of polymers, including intrinsically conducting polymers (polyaniline, polypyrrole), bio‐based polymers (chitosan, polycatechols), and polycationic polymers (poly(diallyldimethylammonium chloride), polyethyleneimine), have been utilized as matrices for graphene‐based nanofillers, yielding sensitive biosensors for various biomolecules, such as proteins, nucleic acids, and small molecules.
Amphiphilic triblock copolymers mPEG‐b‐PMAC‐b‐PCL are synthesized using methoxyl poly(ethylene glycol), cyclic carbonic ester monomer including acryloyl group, and ε‐caprolactone. Copolymers are self‐assembled into core–shell micelles in aqueous solution. Thiolated hemoglobin (Hb) is conjugated with micelles sufficiently through thiol Michael addition reaction to form hemoglobin nanoparticles (HbNs) with 200 nm in diameter. The conjugation of Hb onto the micelle surface is further confirmed by X‐ray photoelectron spectroscopy. Feeding ratio of copolymer micelles to Hb at 1:3 would lead to the highest hemoglobin loading efficiency 36.7 wt%. The UV results demonstrate that the gas transporting capacity of HbNs is well remained after Hb is conjugated with polymeric micelles. Furthermore, the obtained HbNs have no obvious detrimental effects on blood components in vitro. This system may thus have great potential as one of the candidates to be developed as oxygen carriers and provide a reference for the modification of protein drugs.
A collagen sheet with highly aligned collagen fibers is fabricated by continuous cyclic stretch. The rearrangement of the collagen fibers depends on the different process parameters of the cyclic stretch, including magnitude, frequency, and period of stretch. The collagen fibers are aligned perpendicularly to the direction of the stretch. Corneal stromal cells and smooth muscle cells cultivated on the highly aligned collagen sheet show alignment along the collagen fibers without the stretch during culture. Thus, the sheet can be a suitable scaffold for use in regenerative medicine.
The actinomycetes, Gram‐positive filamentous bacteria, are the most prolific source of natural occurring antibiotics. At an industrial level, antibiotics from actinomycete strains are produced by means of submerged fermentations, where one of the major factors negatively affecting bioproductivity is the pellet‐shaped biomass growth. The immobilization of microorganisms on properly chosen supports prevents cell–cell aggregation resulting in improving the biosynthetic capability. Thus, novel porous biopolymer‐based devices are developed by combining melt mixing and particulate leaching. In particular, polycaprolactone (PCL), polyethylene glycol (PEG), and sodium chloride (NaCl) with different grain sizes are used to prepare PCL/PEG/NaCl blends in the melt. These blends are then leached to obtain PCL‐based porous membranes that are used as solid support for the growth of Streptomyces coelicolor, a model streptomycete used to produce various antibiotics including the blue colored actinorhodin (ACT). Thereafter, the effect of the devices' characteristics on the bacterial growth and on the production ACT is evaluated. The results showed that ACT production is strongly dependent on the pore size distribution of the device. Moreover, membranes with pores ranging from 90 to 110 μm are able to offer a potential improvement in volumetric productivity of ACT if compared to conventional submerged liquid culture.
The aim of this study is to design a polymeric nanogel system with tailorable degradation behavior. To this end, hydroxyethyl methacrylate‐oligoglycolates‐derivatized poly(hydroxypropyl methacrylamide) (pHPMAm‐Gly‐HEMA) and hydroxyethyl methacrylamide‐oligoglycolates‐derivatized poly(hydroxyethyl methacrylamide) (pHEMAm‐Gly‐HEMAm) are synthesized and characterized. pHEMAm‐Gly‐HEMAm shows faster hydrolysis rates of both carbonate and glycolate esters than the same ester groups of pHPMAm‐Gly‐HEMA. pHEMAm‐Gly‐HEMAm nanogels have tailorable degradation kinetics from 24 h to more than 4 d by varying their crosslink densities. It is shown that the release of a loaded macromolecular model drug is controlled by degradation of nanogels. The nanogels show similar cytocompatibility as PLGA nanoparticles and are therefore considered to be attractive systems for drug delivery.
Complementary nucleobase‐functionalized polymeric micelles, a combination of adenine‐thymine (A‐U) base pairs and a blend of hydrophilic–hydrophobic polymer pairs, can be used to construct 3D supramolecular polymer networks; these micelles exhibit excellent self‐assembly ability in aqueous solution, rapid pH‐responsiveness, high drug loading capacity, and triggerable drug release. In this study, a multi‐uracil functionalized poly(ε‐caprolactone) (U‐PCL) and adenine end‐capped difunctional oligomeric poly(ethylene glycol) (BA‐PEG) are successfully developed and show high affinity and specific recognition in solution owing to dynamically reversible A‐U‐induced formation of physical cross‐links. The U‐PCL/BA‐PEG blend system produces supramolecular micelles that can be readily adjusted to provide the desired critical micellization concentration, particle size, and stability. Importantly, in vitro release studies show that doxorubicin (DOX)‐loaded micelles exhibit excellent DOX‐encapsulated stability under physiological conditions. When the pH value of the solution is reduced from 7.4 to 5.0, DOX‐loaded micelles can be rapidly triggered to release encapsulated DOX, suggesting these polymeric micelles represent promising candidate pH‐responsive nanocarriers for controlled‐release drug delivery and pharmaceutical applications.
Healing of tendon ruptures represents a major challenge in musculoskeletal injuries and combinations of biomaterials with biological factors are suggested as viable option for improved healing. The standard approach of repair by conventional suture leads to incomplete healing or rerupture. Here, a new elastic type of DegraPol® (DP), a polyester urethane, is explored as a delivery device for platelet‐derived growth factor—BB (PDGF‐BB) to promote tendon healing. Using emulsion electrospinning as an easy method for incorporation of biomolecules within polymers, DegraPol® supports loading and release of PDGF‐BB. Morphological, mechanical and delivery device properties of the bioactive DP scaffolds, as well as differences arising due to different electrospinning parameters are studied. Emulsion electrospun DP scaffolds result in thinner fibers than pure DP scaffolds and experience decreased strain at break [%], but high enough for successful surgeon handling. PDGF‐BB is released in a sustained manner from emulsion electrospun DP, but not completely, with still large amount of it being inside the polymeric fibers after 30 d. In vitro studies show that the bioactive scaffolds promote tenocyte proliferation in serum free and serum+ conditions, demonstrating the potential of this surgeon‐friendly bioactive delivery device to be used for tendon repair.
Chondrocyte‐seeded, photo‐cross‐linked hydrogels prepared from solutions containing 50% mass fractions of methacrylated glycol chitosan or methacrylated hyaluronic acid (MHA) with methacrylated chondroitin sulfate (MCS) are cultured in vitro under static conditions over 35 d to assess their suitability for load‐bearing soft tissue repair. The photo‐cross‐linked hydrogels have initial equilibrium moduli between 100 and 300 kPa, but only the MHAMCS hydrogels retain an approximately constant modulus (264 ± 5 kPa) throughout the culture period. Visually, the seeded chondrocytes in the MHAMCS hydrogels are well distributed with an apparent constant viability in culture. Multicellular aggregates are surrounded by cartilaginous matrix, which contain aggrecan and collagen II. Thus, co‐cross‐linked MCS and MHA hydrogels may be suited for use in an articular cartilage or nucleus pulposus repair applications.
Cell‐free approaches to in situ tissue engineering require materials that are mechanically stable and are able to control cell‐adhesive behavior upon implantation. Here, the development of mechanically stable grafts with non‐cell adhesive properties via a mix‐and‐match approach using ureido‐pyrimidinone (UPy)‐modified supramolecular polymers is reported. Cell adhesion is prevented in vitro through mixing of end‐functionalized or chain‐extended UPy‐polycaprolactone (UPy‐PCL or CE‐UPy‐PCL, respectively) with end‐functionalized UPy‐poly(ethylene glycol) (UPy‐PEG) at a ratio of 90:10. Further characterization reveals intimate mixing behavior of UPy‐PCL with UPy‐PEG, but poor mechanical properties, whereas CE‐UPy‐PCL scaffolds are mechanically stable. As a proof‐of‐concept for the use of non‐cell adhesive supramolecular materials in vivo, electrospun vascular scaffolds are applied in an aortic interposition rat model, showing reduced cell infiltration in the presence of only 10% of UPy‐PEG. Together, these results provide the first steps toward advanced supramolecular biomaterials for in situ vascular tissue engineering with control over selective cell capturing.
A bioinspired adhesive material, polydopamine (pDA), was employed as an interfacial glue to stably immobilize human neural stem cells (hNSCs) on the external surface of biodegradable polycaprolactone (PCL) microspheres, thereby serving as versatile key systems that can be used for cell carriers. The pDA decoration on the PCL microspheres has been resulted in robust hNSC immobilization as well as proliferation on their curved surfaces. The pDA coating has transformed the hydrophobic PCL systems toward water‐friendly and sticky characteristics, thereby resulting in full dispersion in aqueous solution and stable adherence onto a wet biological surface. Adeno‐associated virus, a safe gene vector capable of effectively regulating cell behaviors, can be decorated on the PCL surfaces and delivered efficiently to hNSCs adhered to the microsphere exteriors. These distinctive multiple benefits of the sticky pDA microspheres can provide core technologies that can boost the therapeutic effects of cell therapy approaches.
A polyzwitterion is synthesized by regioselective functionalization of cellulose possessing a uniform charge distribution. The positively charged ammonium group is present at position 6, while the negative charge of carboxylate is located at positions 2 and 3 of the repeating unit. The molecular structure of the biopolymer derivative is proved by NMR spectroscopy. This cellulose‐based zwitterion is applied to several support materials by spin‐coating and characterized by means of atomic force microscope, contact angle measurements, ellipsometry, and X‐ray photoelectron spectroscopy. The coatings possess antimicrobial activity depending on the support materials (glass, titanium, tissue culture poly(styrene)) as revealed by confocal laser scanning microscopy and live/dead staining.
Despite the biocompatibility and osteoinductive properties of calcium phosphate (CaP) cements their low biodegradability hampers full bone regeneration. Herein the incorporation of CaP cement with hyaluronic acid (HAc) microparticles loaded with platelet lysate (PL) to improve the degradability and biological performance of the cements is proposed. Cement formulations incorporating increasing weight ratios of either empty HAc microparticles or microparticles loaded with PL (10 and 20 wt%) are developed as well as cements directly incorporating PL. The direct incorporation of PL improves the mechanical properties of the plain cement, reaching values similar to native bone. Morphological analysis shows homogeneous particle distribution and high interconnectivity between the HAc microparticles. The cements incorporating PL (with or without the HAc microparticles) present a sustained release of PL proteins for up to 8 d. The sustained release of PL modulates the expression of osteogenic markers in seeded human adipose tissue derived stem cells, thus suggesting the stimulatory role of this hybrid system toward osteogenic commitment and bone regeneration applications.
A series of pH‐triggered charge‐reversal polyurethane copolymers (PS‐PUs) containing methoxyl‐poly(ethylene glycol) (mPEG), carboxylic acid groups, and piperazine groups is presented in this work. The obtained PS‐PUs copolymers can form into stable micelles at pH 7.4, which response to a narrow pH change (5.5–7.5) and show a tunable pH‐triggered charge‐reversal property. Doxorubicin (DOX) is encapsulated into the PS‐PU micelles as a model drug. The drug release of DOX‐loaded PS‐PU micelles shows an obviously stepped‐up with reducing the pH. Meanwhile, it is found that the charge‐reversal property can improve the cellular uptake behavior and intracellular drug release in both HeLa cells and MCF‐7 cells. Additionally, the time‐dependent cytotoxicity of the DOX‐loaded PS‐PU micelles is confirmed by MTT assay. Attributed to the tunable charge‐reversal property through changing the molar ratio of piperazine/carboxyl, the PS‐PU micelles will be a potential candidate as an intelligent drug delivery system in future studies.
Polymicrobial biofilm‐associated implant infections present a challenging clinical problem. Through modifications of lyophilized chitosan sponges, degradable drug delivery devices for antibiotic solution have been fabricated for prevention and treatment of contaminated musculoskeletal wounds. Elution of amikacin, vancomycin, or a combination of both follows a burst release pattern with vancomycin released above minimum inhibitory concentration for Staphylococcus aureus for 72 h and amikacin released above inhibitory concentrations for Pseudomonas aeruginosa for 3 h. Delivery of a vancomycin, amikacin, or a combination of both reduces biofilm formation on polytetrafluoroethylene catheters in an in vivo model of contamination. Release of dual antibiotics from sponges is more effective at preventing biofilm formation than single‐loaded chitosan sponges. Treatment of pre‐formed biofilm with high‐dose antibiotic release from chitosan sponges shows minimal reduction after 48 h. These results demonstrate infection‐preventive efficacy for antibiotic‐loaded sponges, as well as the need for modifications in the development of advanced materials to enhance treatment efficacy in removing established biofilm.
The repair of large crushed or sectioned segments of peripheral nerves remains a challenge in regenerative medicine due to the complexity of the biological environment and the lack of proper biomaterials and architecture to foster reconstruction. Traditionally such reconstruction is only achieved by using fresh human tissue as a surrogate for the absence of the nerve. However, recent focus in the field has been on new polymer structures and specific biofunctionalization to achieve the goal of peripheral nerve regeneration by developing artificial nerve prostheses. This review presents various tested approaches as well their effectiveness for nerve regrowth and functional recovery.
Although biodegradable amphiphilic block copolymer micelles have been widely applied in the clinical applications as drug delivery nanocarriers, low‐efficiency cellular internalization frequently reduces therapeutic efficacy of the loaded drugs. Here, photothermal effect‐promoted cellular internalization of finely tuned thermo‐responsive amphiphilic biodegradable block copolymer nanocarriers via noninvasive stimuli of near‐infrared (NIR) light irradiation is demonstrated. Amphiphilic block copolymers, poly(ε‐caprolactone)‐block‐poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide) (PCL‐b‐P(NIPAM‐co‐DMA)), are prepared with finely tuned compositions of P(NIPAM‐co‐DMA) for desirable lower critical solution temperature of the block copolymer micelles in aqueous solution. The block copolymers are then used to co‐encapsulate doxorubicin and indocyanine green, which show high encapsulation efficiency and significant photothermal effect upon exposure to NIR light irradiation. The photothermal effect‐induced collapse and hydrophilic‐to‐hydrophobic transition of P(NIPAM‐co‐DMA) shells significantly enhance the interactions between drug‐loaded micelles and cell membranes, which dramatically promote the cellular internalization of the micelles and therapeutic efficacy of loaded anticancer drugs.
A visible light and pH responsive anticancer drug delivery system based on polymer‐coated mesoporous silica nanoparticles (MSNs) has been developed. Perylene‐functionalized poly(dimethylaminoethyl methacrylates) sensitive to visible light and pH are electrostatically attached on the surface of MSNs to seal the nanopores. Stimulation of visible light and acid can unseal the nanopores to induce controlled drug release from the MSNs. More interestingly, the release can be enhanced under the combined stimulation of the dual‐stimuli. The synergistic effect of visible light and acid stimulation on the efficient release of anticancer drugs from the nanohybrids endows the system with great potential for cancer therapy.
下载免费PDF全文