Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.     

Uniform AMoO4:Ln (A=Sr, Ba; Ln=Eu, Tb) submicron particles: Solvothermal synthesis and luminescent properties

Rare-earth ions (Eu³⁺, Tb³⁺) doped AMoO₄ (A=Sr, Ba) particles with uniform morphologies were successfully prepared through a facile solvothermal process using ethylene glycol (EG) as protecting agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are of high purity and crystallinity and assigned to the tetragonal scheelite-type structure of the AMoO₄ phase. It has been shown that the as-synthesized SrMoO₄:Ln and BaMoO₄:Ln samples show respective uniform peanut-like and oval morphologies with narrow size distribution. The possible growth process of the AMoO₄:Ln has been investigated in detail. The EG/H₂O volume ratio, reaction temperature and time have obvious effect on the morphologies and sizes of the as-synthesized products. Upon excitation by ultraviolet radiation, the AMoO₄:Eu³⁺ phosphors show the characteristic ⁵D₀–⁷F_1–4 emission lines of Eu³⁺, while the AMoO₄:Tb³⁺ phosphors exhibit the characteristic ⁵D₄–⁷F_3–6 emission lines of Tb³⁺. These phosphors exhibit potential applications in the fields of fluorescent lamps and light emitting diodes (LEDs).     

Chitosan–iron oxide nanobiocomposite based immunosensor for ochratoxin-A

The rabbit immunoglobulin antibodies (IgGs) have been immobilized onto nanobiocomposite film of chitosan (CH)–iron oxide (Fe₃O₄₎ nanoparticles prepared onto indium–tin oxide (ITO) electrode for detection of ochratoxin-A (OTA). Excellent film forming ability and availability of –NH₂ group in CH and affinity of surface charged Fe₃O₄ nanoparticles for oxygen support the immobilization of IgGs. Differential pulse voltammettry (DPV) studies indicate that Fe₃O₄ nanoparticles provide increased electroactive surface area for loading of IgGs and improved electron transport between IgGs and electrode. IgGs/CH–Fe₃O₄ nanobiocomposite/ITO immunoelectrode exhibits improved characteristics such as low detection limit (0.5 ng dL⁻¹), fast response time (18 s) and high sensitivity (36 μA/ng dL⁻¹ cm⁻²) with respect to IgGs/CH/ITO immunoelectrode.     

MoO3-C3N4复合光催化剂的可见光下高效催化降解甲基橙

以钼酸铵和C₃N₄为前驱体,利用浸渍法成功制备了高性能MoO₃-C₃N₄复合光催化剂,利用X射线衍射（XRD）、傅里叶红外（FT-IR）、高分辨电镜（HRTEM）及N₂吸附-脱附曲线等测试手段对所得MoO₃-C₃N₄光催化剂进行了结构和形貌表征。以可见光下光催化降解甲基橙反应表征MoO₃-C₃N₄的光催化活性。实验结果表明,MoO₃-C₃N₄光催化剂具有非常好的光催化降解性能,且MoO₃含量对反应活性产生显著影响。当MoO₃含量为1.6%（w/w）时光催化活性最好,其速率常数达到C₃N₄的50倍。通过研究发现该复合催化剂的高活性来自于其Z型光生载流子传输过程,抑制了光生电子空穴对的复合并延长了引入MoO₃产生的载流子的寿命。     

Hydrogen bond strength in chromates with kröhnkite-type chains, K2Me(CrO4)2·2H2O (Me = Mg, Co, Ni, Zn, Cd)

Infrared spectra of the title compounds with kröhnkite-type infinite octahedral–tetrahedral chains, K₂Me(CrO₄)₂·2H₂O (Me = Mg, Co, Ni, Zn, Cd), are presented in the regions of the uncoupled O–D stretching modes of matrix-isolated HDO molecules (isotopically dilute samples) and water librations. The strengths of the hydrogen bonds are discussed in terms of the respective O_wO bond distances, the Me–water interactions (synergetic effect), the proton acceptor capability of the chromate oxygen atoms as deduced from Brown's bond valence sum of the oxygen atoms. The spectroscopic experiments reveal that hydrogen bonds of medium strength are formed in the chromates. The hydrogen bond strengths decrease in the order Cd > Zn > Ni > Co in agreement with the decreasing covalency of the respective Me–OH₂ bonds in the same order, i.e. decreasing acidity of the water molecules. The infrared band positions corresponding to the water librations confirm the claim that the hydrogen bonds in K₂Cd(CrO₄)₂·2H₂O are stronger than those formed in K₂Mg(CrO₄)₂·2H₂O on one hand, and on the other—the hydrogen bonds in K₂Ni(CrO₄)₂·2H₂O are stronger than those in K₂Co(CrO₄)₂·2H₂O.     

Preparation and hydrogen permeation of SrCe0.95Y0.05O3−δ asymmetrical membranes

Asymmetrical thin membranes of SrCe_0.95Y_0.05O_3−δ (SCY) were prepared by a conventional and cost-effective dry pressing method. The substrate consisted of SCY, NiO and soluble starch (SS), and the top layer was the SCY. NiO was used as a pore former and soluble starch was used to control the shrinkage of the substrate to match that of the top layer. Crack-free asymmetrical thin membranes with thicknesses of about 50 μm and grain sizes of 5–10 μm were successfully pressed on to the substrates. Hydrogen permeation fluxes (J_H2) of these thin membranes were measured under different operating conditions. At 950 °C, J_H2 of the 50 μm SCY asymmetrical membrane towards a mixture of 80% H₂/He was as high as 7.6 × 10⁻⁸ mol/cm² s, which was about 7 times higher than that of the symmetrical membranes with a thickness of about 620 μm. The hydrogen permeation properties of SCY asymmetrical membranes were investigated and activation energies for hydrogen permeation fluxes were calculated. The slope of the relationship between the hydrogen permeation fluxes and the thickness of the membranes was −0.72, indicating that permeation in SCY asymmetric membranes was controlled by both bulk diffusion and surface reaction in the range investigated.     

Hydrothermal synthesis of yttria stabilized ZrO2 nanoparticles in subcritical and supercritical water using a flow reaction system

Yttria stabilized zirconia nanoparticles have been prepared by hydrothermal flow reaction system under subcritical and supercritical conditions. ZrO(NO₃)₂/Y(NO₃)₃ mixed solutions were used as starting materials. Reaction temperature was 300–400 °C. Reaction time was adjusted to 0.17–0.35 s. Based on the residual Zr and Y concentrations, the complete conversion of zirconium was achieved irrespective of pH and hydrothermal temperature, whereas the conversion of yttrium increased with an increase in pH and hydrothermal temperature. Stoichiometric solid solution was achieved at pH>8. XRD results revealed that tetragonal zirconia can be formed regardless of yttrium content, where the tetragonality was confirmed by Raman spectroscopy. The average particle size estimated from BET surface area was around 4–6 nm. Dynamic light scattering particle size increased with the solution pH owing to the aggregation of primary particles. TG-DTA analyses revealed that weight losses for adsorbed water and hydroxyl groups decreased with hydrothermal temperature.     

Au-TiO2/Chit modified sensor for electrochemical detection of trace organophosphates insecticides

In this paper, Au–TiO₂/Chit modified electrode was prepared with Au–TiO₂ nanocomposite (Au–TiO₂) and Chitosan (Chit) as a conjunct. The Au–TiO₂ nanocomposite and the films were characterized by electrochemical and spectroscopy methods. A set of experimental conditions was also optimized for the film's fabrication. The electrochemical and electrocatalytic behaviors of Au–TiO₂/Chit modified electrode to trace organophosphates (OPs) insecticides such as parathion were discussed in this work. By differential pulse voltammetry (DPV) measurement, the current responses of Au–TiO₂/Chit modified electrode were linear with parathion concentration ranging from 1.0 ng/ml to 7.0 × 10³ ng/ml with the detection limit of 0.5 ng/ml. In order to evaluate the performance of the detection system, we also examined the real samples successfully in this work. It exhibited a sensitive, rapid and easy-to-use method for the fast determination of trace OPs insecticides.     

Self-powdering and nonlinear optical domain structures in ferroelastic β′-Gd2(MoO4)3 crystals formed in glass

Ferroelastic β′-Gd₂(MoO₄)₃, (GMO), crystals are formed through the crystallization of 21.25Gd₂O₃–63.75MoO₃–15B₂O₃ glass (mol%), and two scientific curious phenomena are observed. (1) GMO crystals formed in the crystallization break into small pieces with a triangular prism or pyramid shape having a length of 50–500 μm spontaneously during the crystallizations in the inside of an electric furnace, not during the cooling in air after the crystallization. This phenomenon is called “self-powdering phenomenon during crystallization” in this paper. (2) Each self-powdered GMO crystal grain shows a periodic domain structure with different refractive indices, and a spatially periodic second harmonic generation (SHG) depending on the domain structure is observed. It is proposed from polarized micro-Raman scattering spectra and the azimuthal dependence of second harmonic intensities that GMO crystals are oriented in each crystal grain and the orientation of (MoO₄)²⁻ tetrahedra in GMO crystals changes periodically due to spontaneous strains in ferroelastic GMO crystals.     

Molybdenum‐tungsten Oxide Nanowires Rich in Oxygen Vacancies as An Advanced Electrocatalyst for Hydrogen Evolution

Electrolysis of water is a promising way to produce hydrogen fuel in large scale. The commercialization of this technology requires highly efficient non‐noble metal electrocatalysts to decease the energy input for the hydrogen evolution reaction (HER). In this work, a novel nanowire structured molybdenum‐tungsten bimetallic oxide (CTAB‐D‐W₄MoO₃) is synthesized by a simple hydrothermal method followed with post annealing treatment. The obtained metal oxides feature with enhanced conductivity, rich oxygen vacancies and customized electronic structure. As such, the composite electrocatalyst exhibits excellent electrocatalytic performance for HER in an acidic environment, achieving a large current density of 100 mA cm^?2 at overpotential of only 286 mV and a small Tafel slope of 71.2 mV dec^?1. The excellent electrocatalytic HER performance of CTAB‐D‐W₄MoO₃ is attributed to the unique nanowire structure, rich catalytic active sites and promoted electron transfer rate.     

Liquid chromatography with and of platinum complexes

Summary Reversed-phase, high-performance liquid chromatography (HPLC) on chemically bonded C₁₈-phases with acetonitrile-water mobile phases, contianing platinum complexes like Zeise's salt C₂H₄PtCl₃, the amine derivative C₂H₄–PtCl₂–NH₂–CH(CH₃)–C₆H₅ or the amino acid compound C₂H₄–PtCl–OOC–CH(N(CH₃)₂)–C₆H₅ by analogy with argentation chromatography, was used to increase selectivity for the separation of various types of olefins, amines and heterocyclic compounds. On the other hand, normal-phase adsorption chromatography on silica with n-heptane, dichloromethane and n-propanol mobile phases proves to be an ideal tool for the analytical and preparative separation of diastereomeric platinum complexes of olefins, introduced by Gil-Av, that can be easily preparedin vitro, by the reaction of C₂H₄–PtCl–OOC–CH(N(CH₃)₂)–C₆H₅ with optically active olefins in CH₂Cl₂. The preparation of the intitial complex as well as its application to the separation of several interesting types of enantiomeric olefins is described and discussed. The number and amount of separable diastereomers formed by the above reaction is strongly influenced by sterical effects. By comparison of the chromatographic pattern of either racemic or partly racemic mixtures, it is possible to decide, which peaks belong to one or the other enantiomeric form of the olefin.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

Hydrothermal synthesis of mesostructured nanocrystalline TiO2 in an ionic liquid–water mixture and its photocatalytic performance

Anatase mesostructured TiO₂ nanocrystalline was prepared in a mixture of 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIM⁺BF₄⁻) ionic liquid and water by a low temperature hydrothermal method. The obtained materials were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption–desorption. The existence of BMIM⁺BF₄⁻ enhanced the polycondensation and crystallization rate, which encouraged the formation of anatase crystal. The TiO₂ particles were thermally very stable and thus resistant to anatase-rutile phase transformation during calcination at high temperatures. The anatase TiO₂ showed high photocatalytic activity in the degradation of p-chlorophenol than that of the commercially available TiO₂, Degussa P25. After 2 h reaction under the UV-irradiation of 250 W, the removing rate of p-chlorophenol was up to 96.3%.     

Preparation of Silicates Using HSi(OC2H5)3 and Their NO x -Adsorption Behavior

The preparation and NO-adsorption/desorption behavior of Li, Ca and Ba silicates were investigated aiming at the application to a NO_x-absorbent. Li silicate was prepared by reaction of HSi(OC₂H₅)₃ with aqueous lithium silicate solution (LSS). Ca and Ba silicates were prepared from gels obtained using CH₃Si(OC₂H₅)₃, Si(OC₂H₅)₄, HSi(OC₂H₅)₃ and alkaline-earth alkoxides. The surface of these silicates indicated the solid basicity of H₀ = 9 and adsorbed the acidic gas of NO. FT-IR spectra of the silicates adsorbing NO showed the absorption peaks in the range of 1300–1600 cm^{– 1} corresponding to ionic and covalent nitrate NO₃^–. The complete desorption of adsorbed NO species occurred above 500°C in the Li silicate, above 500°C in the Ca and Ba silicates prepared using CH₃Si(OC₂H₅)₃, and above 700°C in the Ba and Ca silicates prepared using Si(OC₂H₅)₄. Regarding the Ca and Ba silicates, the difference in siloxane structure is thought to cause the difference in adsorption state and desorption behavior of NO.     

Synthesis of magnetic nickel spinel ferrite nanospheres by a reverse emulsion-assisted hydrothermal process

Nickel ferrite nanospheres were successfully synthesized by a reverse emulsion-assisted hydrothermal method. The reverse emulsion was composed of water, cetyltrimethyl ammonium bromide, polyoxyethylene(10)nonyl phenyl ether, iso-amyl alcohol and hexane. During the hydrothermal process, β-FeO(OH) and Ni_0.75Fe_0.25(CO₃)_0.125(OH)₂·0.38H₂O (INCHH) nanorods formed first and then transformed into nickel spinel ferrite nanospheres. The phase transformation mechanism is proposed based on the results of X-ray powder diffraction, transmission electron microscopy and energy-dispersive X-ray spectroscopy, etc. Nickel ferrite may form at the end of the INCHH nanorods or from the solution accompanied by the dissolution of β-FeO(OH) and INCHH nanorods. The X-ray photoelectron spectroscopy analysis shows that a few Fe³⁺ ions have been reduced to Fe²⁺ ions during the formation of nickel ferrite. The maximum magnetization of the nickel ferrite nanospheres obtained after hydrothermal reaction for 30 h is 55.01 emu/g, which is close to that of bulk NiFe₂O₄.     

Influence of Pd precursors on the catalytic performance of Pd–H4SiW12O40/SiO2 in the direct oxidation of ethylene to acetic acid

The effects of palladium precursors (PdCl₂, (NH₄)₂PdCl₄, Pd(NH₃)₂Cl₂, Pd(NO₃)₂ and Pd(CH₃COO)₂) on the catalytic properties in the selective oxidation of ethylene to acetic acid have been investigated for 1.0 wt% Pd–30 wt% H₄SiW₁₂O₄₀/SiO₂. The structures of the catalysts were characterized using X-ray diffraction, N₂ adsorption, H₂-pulse chemical adsorption, infrared spectrometry of the adsorbed pyridine, H₂ temperature-programmed reduction and X-ray photoelectron spectroscopy. The present study demonstrates that the different palladium precursors can lead to the significant changes in the dispersion of palladium. It is found that Pd dispersion decreases as follows: PdCl₂ > (NH₄)₂PdCl₄ > Pd(NO₃)₂ > Pd(NH₃)₂Cl₂ > Pd(C₂H₃O₂)₂, which is nearly identical to the catalytic activity. This indicates that the dispersion of palladium plays an important role in the catalytic activity. Furthermore, density of Lewis (L) and Brönsted (B) acid sites are also strongly dependent on the palladium precursors. It is also demonstrated that an effective catalyst should possess a well combination of Brönsted acid sites with dispersion of palladium.     

Complexes of apatitic layered compound Ca8(HPO4)2(PO4)4·5H2O with dicarboxylates

Octacalcium phosphate(OCP), Ca₈(HPO₄)₂(PO₄)₄·5H₂O, consists of alternative stackings of layers with an apatitic structure and a brushite-like composition. Here we consider whether or not OCP is able to complex with organic substances. The interplanar spacing (d₁₀₀) of OCP prepared in the presence of dicarboxylates (RC₂O₄ ^2–; R=organic group) expanded from the original value of 18.7 Å to 19.2–26.1 Å depending on the length of R. Examples of R were C_nH_2n(n=1–6), CH(CH₃)CH₂, C(CH₃)=CH, CH=CH, CH₂CH=CHCH₂ and C₆H₄. Structural considerations and experimental data suggested that dicarboxylates were incorporated into the OCP structure through the replacement of HPO₄ ^2– by RC₂O₄ ^2–.     

高效析氧电催化剂Co3O4@NiMn-LDH异质结构阵列的制备

我们合理设计和制备了一种新型的高性能析氧电催化剂——泡沫镍负载Co_3O_4@NiMn-LDH(层状双金属氢氧化物)三维异质结构阵列(Co_3O_4@NiMn-LDH/NF)。这种基于泡沫镍基底的三维异质结构催化剂经简单的两步水热反应即可制得。对比Co_3O_4、NiMn-LDH及传统RuO2催化剂,所制备的Co_3O_4@NiMn-LDH/NF催化剂展示出更优异的电催化析氧性能。在1 mol·L~(-1)KOH溶液中,电流密度为50 mA·cm~(-2)时的过电势仅为282 mV,塔菲尔斜率为64 mV·dec~(-1)。通过有效的界面工程设计,使异质结构陈列Co_3O_4@NiMn-LDH发挥出Co_3O_4和NiMn-LDH各自优异的电催化性能。其中,基于泡沫镍基底生长的活性组分Co_3O_4纳米线阵列作为中间核支撑结构,保持了良好的空隙率,不仅有利于暴露更多的活性位点,而且有利于电解液的扩散和气体产物的释放;而依附于Co_3O_4纳米线阵列上的NiMn-LDH异质结构纳米片层则富有更多的亲水性基团,使得活性位点更易与水结合,从而促进氧析出反应的进行。     

Phase relations in the system K2MoO4–KPO3–MoO3–Bi2O3: A new phosphate K3Bi5(PO4)6

Phase equilibrium in the pseudo-quaternary system K₂O–MoO₃–P₂O₅–Bi₂O₃ was studied as three-component solvent K₂MoO₄–KPO₃–MoO₃ containing 15 mol% Bi₂O₃ during slow cooling and spontaneous crystallization. The results of the investigation were shown on a composition diagram, which indicates the crystallization fields of K₂Bi(PO₄)(MoO₄), K₅Bi(MoO₄)₄, BiPO₄ and K₃Bi₅(PO₄)₆. New phosphate K₃Bi₅(PO₄)₆ was characterized by single-crystal X-ray diffraction (space group C2/c, a=17.680(4), b=6.9370(14), c=18.700(4) Å, β=113.79(3)°) and FTIR spectroscopy. The possibility of lone electron pair stereoactivity of bismuth was suggested using the calculations of characteristics of the Voronoi–Dirichlet polyhedra for K₃Bi₅(PO₄)₆ and K₂Bi(PO₄)(MoO₄).     

Mesoporous MnO2 as enzyme immobilization host for amperometric glucose biosensor construction

Mesoporous MnO₂ (mesoMnO₂) is synthesized facilely through sol–gel process using nonionic surfactant polyxyethylene fatty alcohol (AEO₉) as template. Transmission electron microscopy (TEM) image and N₂ adsorption/desorption isotherm show that the obtained mesoMnO₂ material presents disordered porous structure and appropriate pore size suitable for the immobilization of glucose oxidase (GOx). An amperometric glucose biosensor based on GOx entrapped in mesoMnO₂ is fabricated, in which mesoMnO₂ also acts as a catalyst for the electrochemical oxidation of H₂O₂ produced by enzyme reaction. The biosensor shows fast and sensitive current response to glucose in the linear range of 0.0009–2.73 mM. The response time (t_95%) is less than 7 s. The sensitivity and detection limit are 24.2 μA cm⁻² mM⁻¹ and 1.8 × 10⁻⁷ M (S/N = 3), respectively. This indicates that mesoMnO₂ has promising application in enzyme immobilization and biosensor construction.