Determination of UV filters in packaging by focused ultrasonic solid-liquid extraction and liquid chromatography

A focused ultrasonic solid-liquid extraction (FUSLE) and high performance liquid chromatography (HPLC) with a diode array detector (DAD) is proposed for the determination of ten fat-soluble UV filters in packaging. FUSLE technique is relatively new and has been used for the extraction of a few analytes; such as polycyclic aromatic hydrocarbons and other organic pollutants. In this work, it has been demonstrated that FUSLE is a useful, fast and simple extraction methodology for UV filters because the complete extraction was carried out with just 6ml of tetrahydrofuran and in only one cycle of 30s. The developed method has been validated and applied to the analysis of polyethylene-based multilayer packaging samples. The FUSLE-based method allows the sensitive detection of most of the UV-filters in polyethylene, with limits of detection between 0.4 and 8.5ngmg(-1) (except for BDM). Intra and inter-day relative standard deviation values were below 5 and 14%, respectively, except for MBP. In addition, the proposed method was more efficient than tetrahydrofuran extraction under reflux for 2.5h for all the analytes except for EMT and BDM. Therefore, the developed method can be used to establish the absorption capability of different types of packaging and this information will be very useful in packaging selection.     

Analysis of 51 persistent organic pollutants in soil by means of ultrasonic solvent extraction and stir bar sorptive extraction GC-MS

A novel method based on ultrasonic solvent extraction and stir bar sorptive extraction (SBSE) for the analysis of 51 persistent organic pollutants including organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and polybrominated diphenylethers (PBDEs) in soil samples was developed. The different parameters that affect both the extraction of analytes from the soil samples, such as solvent selection, solvent volume, mass of soil, and extraction time, and the partitioning from the solvent/water mixture to the PDMS were studied. The final selected conditions consisted of the extraction of 1 g of soil with 15 mL methanol by sonication for 30 min. The methanol extract was mixed with 85 mL of Milli-Q water and extracted by means of SBSE for 14 h at 900 rpm. The stir bars were analyzed by thermal desorption-GC-mass spectometry (TD-GC-MS). The effects of the matrix on the recovery of the various pollutants under the developed method were studied using two soils with very different physicochemical properties. Method sensitivity, linearity, repeatability, and reproducibility were also studied. Validation and accuracy of the method were conducted by analyzing two commercial certified reference materials (CRMs). The main advantage of this method resides in the fact that a small amount of a nontoxic solvent (methanol) is needed for the extraction of only 1 g of solid sample allowing LODs ranging from 0.01 to 2.0 microg/kg. Repeatability and reproducibility variations were lower than 20% for all investigated compounds. Results of the CRMs verify the high accuracy of this method.     

Separation and preconcentration of persistent organic pollutants by cloud point extraction

Persistent organic pollutants (POPs) are recognized as a class of poisonous compounds which pose risks of causing adverse effects to human health and the environment. Thus, it is very important to detect POPs in environmental and biological samples. The identification and determination of very low levels of POPs in complex matrices is extremely difficult. Recently a promising environmentally benign extraction and preconcentration methodology based on cloud point extraction (CPE) has emerged as an efficient sample pretreatment technique for the determination of trace/ultra-trace POPs in complex matrices. The purpose of this paper is to review the past and latest use of CPE for preconcentrating POPs and its coupling to different contemporary instrumental methods of analysis. First, the comparison of various extraction techniques for POPs is described. Next, the general concept, influence factors and other methods associated with CPE technique are outlined and described. Last, the hyphenations of CPE to various instrumental methods for their determination are summarized and discussed.     

Application of micro-solid-phase extraction for the determination of persistent organic pollutants in tissue samples

A novel, simple and efficient method for determining persistent organic pollutants (POPs) in tissue samples has been developed. This technique involves the use of simultaneous microwave-assisted digestion (MAD) and micro-solid-phase extraction (micro-SPE), in which the sorbent is held within a propylene membrane envelope, with gas chromatographic-mass spectrometric (GC-MS) analysis. The POPs studied included eleven organochlorine pesticides and five polychlorinated biphenyl congeners. Optimization of the MAD-micro-SPE parameters was performed. The relative standard deviations (RSDs) of the method ranged from 0.14 to 12.7%. Correlation coefficients up to 0.9999 were obtained across a concentration range of 1.25-50 ng g(-1). The method detection limits for POPs ranged from 0.002 to 0.009 ng g(-1). A preliminary study applying the MAD-micro-SPE procedure to human ovarian cancer tissue showed that it was capable of detecting the presence of a wide spectrum of different POPs in benign and malignant tumors.     

Analysis of persistent organic pollutants in marine sediments using a novel microwave assisted solvent extraction and liquid-phase microextraction technique

A simple and novel analytical method for quantifying persistent organic pollutants (POPs) in marine sediments has been developed using microwave assisted solvent extraction (MASE) and liquid-phase microextraction (LPME) using hollow fibre membrane (HFM). POPs studied included twelve organochlorine pesticides (OCP) and eight polychlorinated biphenyl (PCB) congeners. MASE was used for the extraction of POPs from 1 g of sediment using 10 ml of ultrapure water at 600 W for 20 min at 80 degrees C. The extract was subsequently subjected to a single step LPME-HFM cleanup and enrichment procedure. Recovery varied between 73 and 111% for OCPs; and 86-110% for PCBs, and exceeded levels achieved for conventional multi-step Soxhlet extraction coupled with solid-phase extraction. The method detection limit for each POP analyte ranged from 0.07 to 0.70 ng g(-1), and peak areas were proportional to analyte concentrations in the range of 5-500 ng g(-1). Relative standard deviations of less than 20% was obtained, based on triplicate sample analysis. The optimized technique was successfully applied to POP analysis of marine sediments collected from the northeastern and southwestern areas of Singapore's coastal environment.     

Novel facile detection of persistent organic pollutants using highly sensitive gas sensor

Persistent organic pollutants (POPs) are greatly noxious chemicals in environment, and they can cumulate in organisms and transfer between different species. Therefore, it is significant to detect POPs for both environmental evaluation and further treatment. However, developing facile approach for the detection of POPs still remains a challenge so far. In this paper, we report an innovative method for facile detection of POPs using gas sensor for the first time. Porous SnO₂ nanostructures with a special tri-walled structure prepared via hydrothermal route and annealing process, were employed as gas-sensing materials. Through gas measurements, it was revealed that the as-fabricated gas sensor exhibited highly sensitive performance towards target POPs, including methoxychlor, mirex, p,p′-DDT, and aldrin. Moreover, we found that target POPs were distinguishable by extracting characteristics in kinetic curves of gas adsorption-desorption. As the presented detecting approach is facile without the requirements of complex operations, expensive and bulky instruments, it is expected that it would be developed as a promising method for the detection of POPs, and thereby showing its significance for environmental monitoring.     

Prediction of the behaviour of organic pollutants using cloud point extraction

A preconcentration study based on the cloud point phenomenon was carried out for a set of triazine herbicides, three of them chloro-substituted and three of them methylthio-substituted. Concentration factors and recoveries were calculated as function of the percentage of the non-ionic surfactant Triton X-114 employed. From these values, obtained from a cloud point extraction (CPE) procedure, the distribution coefficient between the Triton X-114 micelles and water, Kc, prior to CPE was calculated for each triazine and related to the corresponding octanol-water partition coefficient, Kow. In order to confirm the results obtained with the triazine herbicides, two sets of data from chemically different organic pollutants--organophosporous and chlorophenols--obtained from the literature were assessed, concluding that they display a similar behaviour to that of the triazine herbicides. This can be used to predict the CPE behaviour of other organic pollutants from their octanol-water partition coefficients. The Kc values were compared with the analyte concentration ratio in the surfactant-rich phase and aqueous phase (Ksa) with a view to obtaining a link between the analyte behaviour prior to and after cloud point extraction procedures.     

New home-made assembly for hollow-fibre membrane extraction of persistent organic pollutants from real world samples

Nowadays, hollow fibre membrane extraction techniques are widely used but they are usually applied to water or very simple matrices such as water. In this paper, we propose a new assembly that allows the extraction of forty persistent organic pollutants in real world samples, namely orange juice, porcine plasma and tomatoes. The limits of detection obtained are very low even in the analysis of real samples (9-182 ng L(-1)). The relative standard deviations vary from 1 to 18% and the averaged recoveries in the spike experiments are very high (65-120%) in the different types of samples studied. The new assembly allows a very good precision overcoming in one of the most important shortcomings of membrane extraction techniques. A central composite design has been performed to get optimal extraction conditions for the analytes and also the combined response of all the analytes has been obtained to attain the simultaneous optimum.     

Development of a stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry method for the simultaneous determination of several persistent organic pollutants in water samples

Stir bar sorptive extraction (SBSE) and thermal desorption followed by capillary gas chromatography coupled to mass spectrometry (SBSE-TD-GC-MS) was applied to the simultaneous determination of ultra-traces of 16 polycyclic aromatic hydrocarbons (PAHs), 12 polychlorinated biphenyls (PCBs), 6 phthalate esters (PEs) and 3 nonylphenols (NPs) in water samples. The parameters that could affect the sorption-desorption efficiency were studied. A Plackett-Burman design was used for the screening of the main effects of the experimental parameters related to the desorption step (desorption time, desorption temperature, desorption flow, cryo-focusing temperature and vent pressure). Afterwards, two central composite designs were used to find the optimal process settings for the extraction and desorption steps. The best analytical compromise conditions for the simultaneous determination of analytes from spiked water samples were found to be: sample volume (20 mL), sodium chloride addition (30%), methanol addition (20%), desorption time (10 min), desorption temperature (300 degrees C), desorption flow (23 mL min(-1)), cryo-focusing temperature (-50 degrees C) and vent pressure (7 psi). Remarkable recovery, repeatability and reproducibility were attained. Furthermore, excellent linearities (r(2) = 0.959-0.999) and low detection limits (0.1-10 ng L(-1)) were also achieved for the congeners studied. The proposed methodology was applied for the simultaneous determination of PAHs, PCBs, PEs and NPs in sea and estuarine waters. The influence of humic acids on the recovery was also studied.     

持久性有机污染物的分析检测研究进展

持久性有机污染物(POPs)可以通过各种环境介质(大气、水、生物体等)长距离迁移并长期存在于环境中,具有生物富集性、毒性、致畸、致癌性,对人类健康和环境具有严重的危害.用于此类物质的分析方法很多,主要可分为仪器联用分析方法和快速分析方法,如:色谱-质谱分析、光谱分析、生物分析、光/电分析、传感分析等.这些方法各有优缺点,互为补充.本文将按照分析方法,重点介绍2000年至今在POPs分析技术上的最新进展.     

持久性有机化学污染物(POPs)的定性与定量分析

目前在持久性有机污染物研究方面出现了许多新的研究动向、研究计划相关环境条约以及新的名词.例如:POPs(Persistent Organic Pollutants)持久性有机污染物;PBT(Persistent Bioaccumulative& Toxic Chemicals);持久性生物可积累性毒性化合物;BFRs(Brominated Flame Retardants)溴化阻燃剂;EEDs(Environmental Endocrine Disruptors)环境内分泌干扰物,PTS(Persistent Toxic Substances)等.     

Dechlorination of persistent organic pollutants polychlorobiphenyls by catalytic carbonylation

A new approach to dechlorination of “dioxin-like” ecotoxicants, polychlorinated biphenyls, based on carbonylation, was suggested. The weakly reactive aryl halides are activated by effective catalytic systems based on epoxide-modified cobalt carbonyl in alcoholic alkali solutions.     

Fractionation of chlorinated and brominated persistent organic pollutants in several food samples by pyrenyl-silica liquid chromatography prior to GC-MS determination

A high-performance liquid chromatography (HPLC) method using a column of 2-(1-pyrenyl) ethyldimethylsilylated silica was developed in this work in order to achieve satisfactory and reproducible fractionation of polychlorinated biphenyls (PCBs) from brominated flame retardants (BFRs) (polybrominated diphenylethers, PBDEs; and polybrominated biphenyls, PBBs). After the study of different chromatographic parameters (mobile phase composition and separation temperature were the most important) an isocratic elution with isooctane:toluene (98:2, v/v) at a flow-rate of 1 mL/min, a temperature of 45 °C, and UV-detection at 225 nm was selected for fractionation of PCBs (time region, 4.0-5.8 min) from PBDEs (5.8-9.0 min) and from PBBs (5.8-11.0 min). The applicability of this method to food samples was demonstrated by fractionating PCBs from PBDEs in three food samples (cheese, milk, and fish). Interferences from PCBs (present in real samples at much higher concentrations than PBDEs) were removed in this way. In addition, by analysing these samples by gas chromatography-mass spectrometry (GC-MS) with and without previous fractionation we were able to observe an improvement in detection sensitivity for PBDEs after HPLC fractionation.     

Multi-residue analysis of emerging pollutants in sediment using QuEChERS-based extraction followed by LC-MS/MS analysis

Emerging contaminants are suspected to cause adverse effects in humans and wildlife. Aquatic ecosystems are continuously contaminated by agricultural and industrial sources. To establish a causality relationship between the occurrence of contaminants in the environment and disease, experiments including all environmental matrices must be performed. Consequently, the current analytical tools must be improved. A new multi-residue method for analysing 15 emerging pollutants in sediments based on the Quick, Easy, Cheap, Effective, Rugged and Safe approach is reported. The development of such a multirisque, inter-family method for sediment including pharmaceuticals, pesticides, personal care products and plasticizers is reported for the first time. The procedure involves salting-out liquid–liquid extraction using acetonitrile and clean-up with dispersive solid phase extraction, followed by liquid chromatography coupled with tandem mass spectrometry. The validated analytical procedure exhibited recoveries between 40 and 98 % for every target compound. This methodology facilitated the determination of pollutant contents at nanogram-per-gram concentrations.

Catalytic electrochemical pre-treatment for the degradation of persistent organic pollutants

1. Download : Download high-res image (92KB)
2. Download : Download full-size image

     

新型持久性有机污染物分析方法研究进展

多溴联苯醚、多溴联苯、全氟辛基羧酸/磺酸、十氯酮和溴代二(口恶)英等属于"斯德哥尔摩公约"2009年新增列和潜在的持久性有机污染物,近年来受到环境研究者的广泛关注.其在环境中的残留特征、污染来源、演变趋势、迁移传输、生物累积和毒理效应方面的研究依赖于分析技术的发展.多溴联苯醚和多溴联苯与传统持久性有机污染物具有类似的理化性质,采样和分析测定过程同有机氯农药和多氯联苯相近,可使用索氏提取、自动索氏提取、超声萃取、微波辅助萃取、压力溶剂萃取等多种提取方法,酸洗、多层复合层析柱和凝胶渗透色谱是最常用的净化手段,分析时采用GC/MS-EI或GC/MS-NCI对指示性单体进行定性定量.由于环境背景中的残留很低,使用高分辨质谱和串联质谱可降低方法检出限.对于水环境和沉积物中的全氟烷基羧酸、磺酸及其盐,目前主要采用固相萃取HPLC/MS/MS测定.亲水亲油平衡的萃取柱对全氟辛基羧酸和磺酸有良好的回收,弱阴离子交换萃取柱对短链和长链全氟烷基羧酸和磺酸都有满意的回收.十氯酮有一定极性,采用含有丙酮的萃取体系具有较高的回收率,GC/ECD和GC/MS分析时对色谱系统的清洁性有较高的要求,否则容易导致色谱峰拖尾影响定性和定量.溴代二(口恶)英与二(口恶)英的分析技术路线类似,需要更严格的净化过程分离多溴联苯醚,并在分析时控制热脱溴.此外,方法的应用还依靠溴代二(口恶)英标准物质的完善.     

Analysis of organic pollutants in sewage by supercritical fluid extraction

Summary Analytical methods have been developed for the determination of organic pollutants of intermediate polarity in sewage. Water samples are first passed through a solid phase adsorption cartridge. The analytes are then extracted from the absorbent with supercritical CO₂ into a small volume of trapping solvent. Finally, the extracts are analyzed directly by capillary gas chromatography and gas chromatography-mass spectrometer. The various parameters (pressure, temperature, type and concentration of modifiers, trapping solvent, flow rate and volume of supercritical fluid and equilibrium time) influencing the efficiency of extraction were studied. Extraction efficiencies for the test compounds are >70%, and relative standard deviations are <4.6% (n=3). The methods established were applied to the analysis of sewage at the Lanzhou Wastewater Treatment Plant, China. 66 organic pollutants were detected, of which 15 compounds appeared in the list of priority pollutants suggested by the US EPA.     

Application of QuEChERS method for extraction of selected persistent organic pollutants in fish tissue and analysis by gas chromatography mass spectrometry

The QuEChERS method developed for 22 organochlorine pesticides (OCPs) and 7-polychlorinated biphenyls (PCBs) in fish tissue involves a simple and efficient freezing technique for removal of lipids. The equipment developed consists of disposable syringes and a freezing block constructed from simple materials found in most laboratories. The freezing block keeps the temperature in the extract at -20.5°C up to 10 min after being exposed to room temperature. After the freezing step 69% of the lipids in tilapia and 61% in salmon are removed. Further reduction of co-extractives up to 96% in tilapia and 87% in salmon can be made by treatment with CaCl(2) and primary secondary amino sorbent (PSA) which removes the fatty acids. Spiking experiments in tilapia at 5 and 50 ng/g and extracted with acetonitrile show recovery range from 70 to 115% for all compounds. In salmon the recoveries are in the range 43-118% for the OCPs and 26-65% for the PCBs. Analysis of a standard reference material shows acceptable results for most of the pesticides but low results for the PCBs. The estimated LOQs were in the range 1-5 ng/g for tilapia and 2-10 ng/g for salmon. The method has been applied to analyse fish samples from Lake Koka in Ethiopia. It was investigated if addition of a less polar water miscible solvent than acetonitrile could increase the recovery of OCPs and PCBs. The results show that a mixture of 75% acetonitrile and 25% tetrahydrofurane (ACN/THF 75/25) clearly enhances the recoveries for most OCPs (47-101%) and PCBs (42-79%) from salmon. The recovery of aldrin increases significantly from 55% to over 80%. The method using ACN/THF 75/25 is applicable to the extraction of OCPs and PCBs from fish tissue having a lipid content of up to about 11% (salmon) with recoveries ≥70% for most of the OCPs and ≥42% for the PCBs.     

Determination of selected persistent organochlorine pollutants in human milk using solid phase disk extraction and narrow bore capillary GC-MS

Summary A simple and rapid procedure based on solid phase disk extraction (SPDE), adsorption chromatography on acidified silica gel and GC-MS analysis was developed for the determination of 8 organochlorine pesticides and 19 PCB congeners in human milk. By using the SPDE procedure, a high throughput and parallel sample processing could be achieved. Method variables were optimized on whole cow's milk (3.5% fat) fortified at levels close to concentrations found in human milk. Recoveries of target analytes were acceptable and ranged from 69 to 102% and 86 to 120% for whole and skimmed milk, respectively. By the use of two stage clean-up and narrow bore capillary columns, detection limits as low as 20 pg mL⁻¹ could be obtained. The method was used for the determination of organochlorine pollutants in human milk from 19 individuals from Romania. The concentrations of PCBs were low, whereas those of organochlorine pesticides were higher than the values reported from other European countries.     

Photocatalytic remediation of persistent organic pollutants (POPs): A review

The release of persistent organic pollutants (POPs) into the environment is an issue of global concern, as the chemicals are stable over a prolonged period resulting in their accumulation in many animals and plants. Although POPs are banned in several countries, many chemicals have been proposed as POP candidates to be added to the existing compounds as defined by the United Nations Stockholm Convention committee. To address the safe disposal and clean-up of such chemicals, new, and especially cost-effective, remediation technologies for POPs are urgently required. This review focuses on existing POPs and the types of remediation processes available for their removal. Particular attention is paid towards photocatalysis using nanocatalysts in this review, due to their effectiveness towards POP degradation, technological feasibility, and energy and cost-efficiency. The underlying principles and the key mechanisms of the photocatalysts based on TiO₂ based materials, metal oxides, light-assisted Fenton systems, framework materials e.g. metal-organic frameworks and polyoxometalates, including metal-free and hybrid photocatalysts for POPs cleanup are described for advance applications in solving the POPs contamination in the environment. The improvements of photocatalytic performance especially the POPs removal mechanism using the conventional and modified process, the design and optimization of photoreactors, and the integration technology are the critical challenges for the emerging pollutants and require intensive research for the forthcoming future.