Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

The acceleration of decomposition of potassium persulfate in the presence of sodium dodecyl sulfate and polymer particles as a model of emulsion polymerization system

The decomposition rates of potassium persulfate (KPS) in aqueous solutions containing sodium dodecyl sulfate (SDS) in the presence of polystyrene or poly(methyl methacrylate) particles as models of emulsion polymerization systems were measured by isotachophoresis. Free SDS molecules dispersed in the monomolecular state had an ability to accelerate the KPS decomposition, but SDS molecules adsorbed onto the polymer particles did not accelerate it.Part CXX of the series of Studies on Suspension and Emulsion     

Production of anomalously shaped carboxylated polymer particles by seeded emulsion polymerization

Anomalous polymer particles with a partial protuberance like octopus ocellatus were produced under alkaline conditions by seeded emulsion copolymerization for styrene and butyl acrylate, with styrene-butyl acrylate-methacrylic acid terpolymer emulsion as seed. The mechanism of production of the polymer particles was studied. By transmission electron microscopic observation of the particles at each conversion, it was observed that the anomalous polymer particles were produced by partial growth of each of the individual seed particles throughout polymerization. Ionization of the carboxyl groups and low viscosity in the growing particles during the process of polymerization were important factors for partial growth.Part CIII of the series Studies on Suspension and Emulsion.     

An investigation of micro-brownian motions in polydimethylsiloxane by complementary incoherent-neutron-scattering and nuclear-magnetic-resonance experiments below room temperature

Two different experimental methods, neutron scattering and nuclear magnetic resonance are used to investigate the random methyl group and segmental rotational jump motions in polydimethylsiloxane. It is shown that nuclear magnetic relaxation and line width experiments are complementary to incoherent neutron scattering fixed-window experiments, the principle of the fixed-window experiments being discussed in somewhat detail. Satisfactory agreement of these experimental techniques is achieved as to the determination of the two model parameters of the motional processes in question, i. e. the activation energy and the preexponential factor of the Arrhenius ansatz made for the correlation time or jump time, respectively.Contribution partly presented during the meeting of the Macromolecular Club, June 8–10, 1983 in Uppsala, the spring conference of the Deutsche Physikalische Gesellschaft, March 12–17, 1984 in Münster and the Fourth International Seminar on Polymer Physics, October 22–26, 1984 in Eyba (GDR).     

SAXS study of core-shell colloids

Polymeric core-shell systems were produced by a two-stage emulsion polymerization technique under fixed conditions: i) monodisperse seed latex with a sufficiently high particle number; ii) starved monomer-II addition; iii) water-soluble initiator; iv) incompatibility of core and shell polymer. From electron micrographs, it is not possible to determine where the second polymer is located within these two-stage emulsion polymers. The internal structure of the particles can be detected by small-angle x-ray scattering. The results indicate that; i) the emulsion polymerization process takes place in a small surface layer region of the seed particles, and ii) a small interfacial layer exists between the core and shell polymer.Part 6 of Polymerizations in the Presence of Seeds     

Covalent immobilization of trypsin onto poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres by cyanogen bromide method and its enzymatic activity

Covalent immobilization of trypsin onto poly(2-hydroxyethyl methacrylate)/ polystyrene composite microspheres, produced by emulsifier-free seeded emulsion polymerization technique, was carried out using the cyanogen bromide method under various conditions. The highest enzymatic activities of the trypsin immobilized in this study against N--benzoyl-L-arginine ethyl ester and N--benzoyl-L-arginine-p-nitroanilide, as low-molecular substrates and casein as a high-molecular substrate, were high, as corresponding to 80%, 85% and 50% of those of free trypsin, respectively.Part C of the series Studies on Suspension and Emulsion.     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Production of anomalous polymer microspheres having uneven surfaces by “stepwise” heterocoagulation technique

Anomalous polymer microspheres having uneven surfaces were produced by stepwise heterocoagulation technique of small polymer particles (SPs) onto large polymer particles (LPs).SPs andLPs have surface charges opposite to each other in the emulsion states.SPs were produced by emulsion copolymerization of styrene and methacryloyloxyethyltrimethylammonium chloride, andLPs by emulsion terpolymerization of styrene, butyl acrylate and methacrylic acid, with nonionic emulsifier being used in both cases. Maximum covering ofLP bySPs was obtained under the conditions that both emulsions were blended without the coagulation at pH 3 at room temperature and then left stand to coagulate with each other at 70 °C for 4 h at pH 9.Part CXI of the series Studies on Suspension and Emulsion.     

Immunoactivity of polymer microspheres with their hydrophilic/hydrophobic heterogeneous surface sensitized with an antibody

Styrene/2-hydroxyethyl methacrylate polymer microspheres consisting of various polymer compositions were produced by emulsifier-free seeded emulsion polymerization technique. Using these microspheres, which should have hydrophilic/hydrophobic heterogeneous surface, the effects of surface hydrophilicity on the main, fundamental requirements for an immunomicrosphere — high colloidal stability, sensitive immunologic agglutinability and insensitive non-specific agglutinability — were studied in detail. There was a region of the surface hydrophilicity that satisfied the three requirements simultaneously.Part CII of the series Studies on Suspension and Emulsion.     

Electrokinetic study on concentrated suspensions using colloid vibration potential measurements

-potentials of a silica suspension and three types of polystyrene latex suspensions with different surface charge groups were measured, as a function of the particle concentration () in the suspension over a wide range, using the colloid vibration potential (CVP) technique. The concentration dependence of the-potential in silica suspension is explained well by Levine et al.s [1] cell model theory, verifying the applicability of the cell model to the CVP in silica suspension. However, the-potential of latex suspensions ordinarily decreases as the particle concentration increases, even after being corrected by the term of (1-). This tendency is especially noticeable in the systems that have particles with high surface charge densities. Furthermore, the conductivity measurements of these suspensions reveal that the conductivity of these systems, especially in their highly charged state, increases as the particle concentration is increased; opposite in tendency to silica suspensions. These new findings can be explained as follows: on the highly charged surface of a latex particle, a polyelectrolyte-like (hairy) layer is present, which overlaps at some point. This permits interparticle surface conduction and results in the abnormal behavior of CVP in these systems.     

Water self-diffusion in micellar solutions and in lyotropic mesophases of the system water/Triton TX-100

Studies by Pulsed Field Gradient NMR (PFG-NMR) methods and other physico-chemical experiments have been used to clarify the processes connected with water self-diffusion in mixtures formed by water and Triton TX-100. In micellar solutions the solvent diffusive trend is related to micelle hydration and, to a much less extent, to micelle size and shape. Hydration numbers from PFG-NMR are close to those obtained by viscosity experiments. In solution phases of the reversed kind, water in oil, water self-diffusion data suggest that aqueous domains are large and bicontinuous. Water self-diffusion in the hexagonal lyotropic mesophase has been interpreted by introducing a geometrydependent contraint, , termed structural factor, which is related to the parameters of the phase.     

Torsional potential and strain energy distribution in an extended chain under stress

Torsional potentialV() for the single bond transformation in an extended hexadecane, subjected to elongation, has been determined by molecular mechanics calculations. The stored elastic energy significantly modifies the potentialV(), the conformational energies and the barriers of transition. Apart from the soft torsional coordinate, elastic energy is also dissipated considerably by bond stretching and angle bending. Maximal variations of the valence coordinates occur in the vicinity of the torsional defect and dampen along the chain. At higher elongation, the gauche minimum on the potentialV() disappears and the calculations predict the abrupt gauche to trans transition. The energetics of torsion of a deformed chain are compared with the experimental data on the hydrodynamic extension of polymers in dilute solution by elongational flow. The calculations also provide details of a single bond transformation mechanism at conformational interconversions in a long chain, proposed by Helfand.     

Potential theory in the problems of interfraction at small gap widths. A solid sphere and a droplet

A solid sphere approaches a spherical droplet at small gap widths. The radii of the particles are identical. Potential theory is applied and the problem of interaction brought to the solution of an integrodifferential equation for radial velocity at the droplet/ thin layer interface. Asymptotic formulae are reported for interface velocity and drag force for small and large viscosity ratios. The results are compared with the solutions for a solid sphere and flat tangentially mobile interface. Thus, two major effects may be distinguished: opening of the gap and curving of the streamlines inside the droplets. The latter is shown to cause a relative increase in the drag force.     

Analysis of ″stepwise″ heterocoagulation process of small cationic polymer particles onto large anionic polymer particles using dynamic light scattering

In order to clarify in detail the process of the stepwise heterocoagulation of small polymer particles (SP) onto large polymer particles (LP), which we proposed to prepare anomalous polymer particles, the particle-size distribution in each step was estimated using dynamic light scattering.SP andLP have surface charges opposite to each other in emulsion states.SP were produced by emulsion copolymerization of styrene and methacryloyloxyethyltrimethylammonium chloride, andLP by emulsion terpolymerization of styrene, butyl acrylate, and methacrylic acid. Both emulsions in which nonionic emulsifier had been added were blended without coagulation and then the heterocoagulation was carried out by adjusting of the pH and heating.Part CXVII of the series Studies on Suspension and Emulsion.     

Phase separation in colloidal dispersions with nonadsorbing polymer

The influence of the volume restriction effect on phase separation in colloidal dispersions consisting of a nonadsorbing polymer has been studied using statistical mechanical cell models and perturbation theories in combination with Monte Carlo experiments. The attractive interparticle potential proposed by Asakura and Oosawa is used to represent the effect of polymer depletion between the particles. The equilibrium properties are determined using the cell model for the solid-like phase (with Monte Carlo simulations for the structure of the solid phase) and a perturbation theory for the liquid-like phase. Both aqueous and nonaqueous dispersions are considered, and the phase separation behavior predicted is compared with available experimental and theoretical results.     

Cubic phases in surfactant and surfactant-like lipid systems

Cubic liquid crystalline phases are common in surfactant and surfactant-like lipid systems at temperatures above the Krafft point. They are optically isotropic and very stiff. Therefore, they are often not recognized as independent phases and separated in pure state. The liquid crystalline nature is evidenced by a low-angle diffraction pattern with sharp reflections having Bragg-values above 20 Å coupled with a diffuse wide-angle reflection at 4.5 Å, proving that the hydrocarbon moiety is in a liquid state. The cubic phases occur in a variety of lipid/water systems (also with liquid organic solvents), such as simple soaps, amphiphilic lipids of biological origin, and extracts from membrane lipids. The location of the cubic phases in a phase diagram varies.The original concept of a cubic structure composed of closed globular aggregates, either of oil-in-water or water-in-oil type in face-centered array seems to be obsolete. The present structure concepts include closed anisotropic aggregates, short rod-like aggregates forming continuous networks or lamellar aggregates with zero curvature forming networks of Infinite Periodic Minimal Surfaces (IPMS). The structure is mostly primitive or body-centered cubic.     

A DSC study of PVAC-PMMA two-stage emulsion polymers

Core-shell polymer colloids were produced by a two-stage emulsion polymerization technique. The polymers thus formed were investigated by means of differential scanning calorimetry (DSC). The DSC thermograms show two separate glass transition regions of the core and the shell component with positions unchanged regardless of chemical composition. Increases in specific heat capacity at the glass transition temperature of both components are lower than theoretical values calculated from the net chemical composition. From these results, it is possible to estimate i) the chemical composition of the interfacial layer and ii) the interfacial layer thickness. This interfacial layer thickness is in the order of 2–7 nm.Part 7 of Polymerizations in the Presence of Seeds     

Estimation of distribution of vinyl groups in micron-sized monodisperse polymer microspheres by bromine titration method

The distribution of vinyl groups in polystyrene/poly(styrene-divinylbenzene) (PS/P(S-DVB)) composite microspheres produced by seeded copolymerization of S and DVB in the presence of 2.1-m monodisperse PS seed particles was estimated from the amount detected with bromine titration method as a function of the reaction time under various conditions.Part CXXIII of the series Studies on Suspension and Emulsion.     

Aufschlu? mit aktiviertem Sauerstoff bei Bestimmung extrem niedriger Spurenelementgehalte in organischem Material

Zusammenfassung Die Technik der kalten Verbrennung mit aktiviertem Sauerstoff wird für 1g-Proben organischer Matrices modifiziert, deren Spurenelementgehalte im ng-Bereich zu bestimmen sind. Die Veraschung erfolgt in einem speziellen kleinen Quarz-Gefäß mit aufgesetztem Kühlfinger; der Sauerstoff wird im Hochfrequenzfeld eines Mikrowellengenerators mit variabler Leistung angeregt. Die Methode wurde mit den Radionukliden der flüchtigen Elemente Selen, Zink und Quecksilber überprüft.

---

Decomposition with activated oxygen in the determination of extremely low contents of trace elements in organic materials

To determine elements in the ng-range in 1 g samples of organic materials the principle of low temperature ashing was modified by using microwave frequencies to excite oxygen. Thus, samples and apparatus, can be microsized. The decomposition, performed in a small quartz combustion-tube was tested with radionuclides of the volatile elements selenium, zinc and mercury.

     

Formation of monodisperse poly(1-methacryloxybenzotriazole) particles by radiation-induced dispersion polymerization

Radiation-induced dispersion polymerization of 1-methacryloxybenzotriazole (MABt) in ethyl propionate starts as homogeneous mixture and the resulting polymer precipitates as spherical particles. Formation, size, and shape of polymer particles are strongly dependent on the initial monomer concentration. Three regions can be distinguished: formation of deformed particles at concentrations of 15 w/v-% MABt; formation of spherical particles at concentrations from 18 to 35 w/v-% MABt; no precipitation of polymer at concentrations of 40 w/v-% MABt. The spherical particles at 20 w/v-% MABt had a diameter of 0.54 ± 0.31 m for 3 kGy irradiation and 2.93±0.68 m for 30 kGy. The number distribution of the microspheres shows that the spherical particles with small sizes formed at low irradiation dose (low conversion) disappears with increasing irradiation dose because of multi-coating by newly produced polymer.