硫代米氏酮与1-取代-1, 3-丁二烯的环加成反应

研究了硫代米代酮与反-1-苯基-1, 3-丁二烯(2a), 反-2, 4-戊二烯酸甲酯(2b), 反-1, 3-戊二烯(2c)的环加成反应, 硫酮与这些双烯在50-70℃下反应, 反应的区域选择性为生成的主要加成物位阻较小, 并用前线分子轨道理论及立体化学进行了解释。     

Wittig-Horner 反应合成维A酸酯的改进方法

改进了Wittig-Horner反应合成维A酸酯的方法,利用3-甲基5-(2,6,6-三甲基-1-环已烯-1-基)-1,3(或1,4)-戊二烯膦酸二烷基酯直接与五碳醛反应合成目标产物,省掉了碱催化下的双键重排反应。将含有C^1末端双键的膦酸二烷基酯直接用于wittig-Horner反应。     

几种姜黄素类1,4-戊二烯-3-酮衍生物的合成及结构表征

以芳香醛和酮为原料,合成了3类姜黄素类1,5-二芳基-1,4-戊二烯-3-酮衍生物:1,5-二噻吩基-1,4-戊二烯-3-酮(Ⅰ)、1,5-二苯基-1,4-戊二烯-3-酮类(Ⅱ)和1,5-二呋喃基-1,4-戊二烯-3-酮(Ⅲ);利用元素分析、红外光谱、核磁共振谱(1 H NMR及13 C NMR)分析了产物的组成和结构,初步探讨了其反应条件和反应机理.结果表明,以无水乙醇为溶剂、8%的NaOH溶液为催化剂,反应温度为30⁵0℃时,反应产率较高.     

用IR、~1H和~(13)C-NMR研究聚戊二烯-1,3结构

用IR、~1H和~(13)C-NMR方法研究了环烷酸钕催化聚戊二烯-1,3的链节结构和序列分布。结果表明,聚合物含有约70％顺-1,4,25％反-1,2和5％反-1,4结构。确定了计算脂肪碳~(13)C-NMR化学位移的一组经验参数,对各峰做了归属。~(13)C-NMR能很好地辨别顺-1,4,反-1,4和反-1,2等各种结构,发现稀土催化聚戊二烯-1,3单体链节是以头-尾相联,不存在反结,并发现了1,4-1,2联结的序列。     

3-羟基-1-(2,6,6-三甲基-3-环己烯基)-1-丁酮的合成及其向卷烟烟气释放δ-突厥酮的研究

以亚异丙基丙酮,1,3-戊二烯为原料经Diets-Alder反应合成了4-乙酰基-3,5,5-三甲基环己烯(4),4再与乙酸乙酯在乙醇钠的存在下缩合得到1-(2,6,6-三甲基-3-环己烯-基)-1,3-丁二酮(5),5用硼氢化钠还原合成了3-羟基-1．(2,6,6-三甲基-3-环己烯基)-1-丁酮。其结构经GC—MS和^1H NMR证实。将此目标化合物用作香料成分加入卷烟,用GC—MS检测其烟气成分,发现此化合物在卷烟燃吸时能发生裂解反应,向烟气释放具有致香作用的δ-突厥酮。     

1,3-丙二硫醇替代试剂1-（1,3-二噻-2-亚基）丙酮的缩硫醛/酮化反应

通过易制备的3-(1,3-二噻-2-亚基)-2,4-戊二酮(1b)在酸性条件下的脱乙酰化反应制得1-(1,3-二噻-2-亚基)丙酮(1f),产率为86%. 在MeCOCl/MeOH体系中,常温或回流条件下,化合物1f能作为有效的1,3-丙二硫醇替代试剂与醛和酮进行缩硫醛/酮化反应,高产率(86%～99%)合成1,3-二噻烷衍生物. 与已报道的替代试剂2-(2,4-二氯-1,4-戊二烯-3-亚基)-1,3-二噻烷(1a)、3-(1,3-二噻-2-亚基)-2,4-戊二酮(1b)、2-(1,3-二噻-2-亚基)-3-羰基丁酸甲酯(1c)、2-(1,3-二噻-2-亚基)-3-羰基丁酰胺(1d)和2-(1,3-二噻-2-亚基)-3-羰基丁酸(1e)相比,化合物1f是活性最好的1,3-丙二硫醇替代试剂.     

C_5馏分及其羰化产物的毛细管气相色谱分析

石油裂解副产物C5馏分及其羰化产物是成分较为复杂的混合物,尤其是C5馏分中1,3-环戊二烯和顺-1,3-戊二烯的物性更为接近。用SE－54弹性石英毛细管柱和角鲨烷玻璃毛细管柱分别对C5馏分及其羰化产物进行了分析,使各组分达到了很好的分离。     

(±)-脱落酸的合成

以β-紫罗兰酮为起始原料,经环氧化、开环、烯丙位氧化、Wittig反应、碱性水解5步反应,以39％的总收率合成了植物激素3-甲基-5-(1-羟基-4-氧代-2,6,6-三甲基-2-环己烯基)-2,4-戊二烯酸(脱落酸),用IR、¹H NMR、MS及元素分析等测试技术表征了产物的结构。     

查尔酮共轭体系紫外光谱的取代基效应

本文以取代查尔酮为标准系列,提出了一组新的取代基参数αP,并用αP研究了1,5-二取代芳基-1,3-戊二烯-5-酮系列化合物紫外光谱的取代基效应, 并初步探讨了 P与αP之间的关系。     

6-取代-l,4-环辛二烯的单重态氧反应——合成顺式-5,8-和反式-5,6-二取代-1,3-环辛二烯含氧衍生物的方便途径

以竹红菌甲素作敏化剂匹配高压钠灯产生单重态氧,在甲醇溶液中,氧化6-取代-1,4-环辛二烯(1),(2),并经亚硫酸钠还原,得到顺-5,8-二取代-1,3-环辛二烯和反-5,6-二取代-1,3-环辛二烯发。化合物(3)是在三氯乙烷溶液中,未经还原得到过氧化氢基取代-1,3-环辛二烯。基态分子的稳定构象决定了反应产物的立体选择性。这类反应为用光氧化方法合成顺-5,8-二取代和反-5,6-二取代-1,3-环辛二烯含氧衍生物提供了方便的途径。     

Synthesis and characterisation of mixed ligand Pt(II) and Pt(IV) oxadiazoline complexes

The nitrile ligands in trans-[PtX2(PhCN)2] (X = Cl, Br, I) undergo sequential 1,3 dipolar cycloadditions with nitrones R1R2C=N+(Me)-O(-) (R1 = H, R2 = Ph; R1 = CO2Et, R2 = CH2CO2Et) to selectively form the Delta4-1,2,4-oxadiazoline complexes trans-[PtX2(PhCN) (N=C(Ph)-O-N(Me)-CR1R2)] or trans-[PtX2(N=C(Ph)-O-N(Me)-CR1R2)2] in high yields. The reactivity of the mixed ligand complexes trans-[PtX2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] towards oxidation and ligand substitution was studied in more detail. Oxidation with Cl2 or Br2 provides the Pt(IV) species trans-[PtX2Y2(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] (X, Y = Cl, Br). The mixed halide complex (X = Cl, Y = Br) undergoes halide scrambling in solution to form trans-[PtX(4-n)Yn(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] as a statistical mixture. Ligand substitution in trans-[PtCl2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] allows for selective replacement of the coordinated nitrile by nitrogen heterocycles such as pyridine, DMAP or 1-benzyl-2-methylimidazole to produce mixed ligand Pt(II) complexes of the type trans- [PtX2(heterocycle)(N=C(Ph)-O-N(Me)-CR1R2)]. All compounds were characterised by elemental analysis, mass spectrometry, IR and 1H, 13C and 195Pt NMR spectroscopy. Single-crystal X-ray structural analysis of (R,S)-trans-[PtBr2(N=C(Ph)-O-N(Me)-CH(Ph))2] and trans-[PtCl2(C5H5N)(N=C(Ph)-O-N(Me)-CH(Ph))] confirms the molecular structure and the trans configuration of the heterocycles relative to each other.     

Unexpectedly efficient activation of push-pull nitriles by a Pt(II) center toward dipolar cycloaddition of Z-nitrones

Pt(II)-coordinated NCNR'(2) species are so highly activated towards 1,3-dipolar cycloaddition (DCA) that they react smoothly with the acyclic nitrones ArCH=N(+)(O(-))R' (Ar/R' = C(6)H(4)Me-p/Me; C(6)H(4)OMe-p/CH(2)Ph) in the Z-form. Competitive reactivity study of DCA between trans-[PtCl(2)(NCR)(2)] (R = Ph and NR'(2)) species and the acyclic nitrone 4-MeC(6)H(4)CH=N(+)(O(-))Me demonstrates comparable reactivity of the coordinated NCPh and NCNR'(2), while alkylnitrile ligands do not react with the dipole. The reaction between trans-[PtCl(2)(NCNR'(2))(2)] (R'(2) = Me(2), Et(2), C(5)H(10)) and the nitrones proceed as consecutive two-step intermolecular cycloaddition to give mono-(1a-d) and bis-2,3-dihydro-1,2,4-oxadiazole (2a-d) complexes (Ar/R' = p-tol/Me: R'(2) = Me(2)a, R'(2) = Et(2)b, R'(2) = C(5)H(10)c; Ar/R' = p-MeOC(6)H(4)/CH(2)Ph: R'(2) = Me(2)d). All complexes were characterized by elemental analyses (C, H, N), high resolution ESI-MS, IR, (1)H and (13)C{(1)H} NMR spectroscopy. The structures of trans-1b, trans-2a, trans-2c, and trans-2d were determined by single-crystal X-ray diffraction. Metal-free 5-NR'(2)-2,3-dihydro-1,2,4-oxadiazoles 3a-3d were liberated from the corresponding (dihydrooxadiazole)(2)Pt(II) complexes by treatment with excess NaCN and the heterocycles were characterized by high resolution ESI(+)-MS, (1)H and (13)C{(1)H} spectroscopy.     

Syntheses, structures, and electrochemical properties of inclusion compounds of cucurbit[8]uril with cobalt(III) and nickel(II) complexes

Inclusion compounds of a macrocyclic cavitand cucurbit[8]uril (CB[8]) with cobalt(III) and nickel(II) complexes of 1,3-diaminopropane (tn) and 1,3-diamino-2-propanol (tmOH) { trans-[Co(tn) 2Cl 2]@CB[8]}Cl.14H 2O ( 1), { trans-[Co(tmOH)(tmO)]@CB[8]}Cl 2.22H 2O ( 2), and { trans-[Ni(tmOH) 2]@CB[8]}Cl 2.22H 2O ( 3) were synthesized and characterized by X-ray single crystal analysis, IR spectroscopy, ESI-MS, and by solid-state stripping voltammetry. The encapsulation of trans-[Co(tn) 2Cl 2] (+) within the cavity of CB[8] stabilizes the complex toward ligand substitution reactions in aqueous solution. The electrochemical study demonstrates that CB[8] prefers the oxidized species in trans-[Co(tn) 2Cl 2] (+)/ trans-[Co(tn) 2Cl 2] (0) and trans-[Co(tmO)(tmOH) 2] (2+)/ trans-[Co(tmO)(tmOH) 2] (+) redox couples, but stabilizes the reduced form trans-[Ni(tmOH) 2] (2+) against the oxidized species. The reversibility of voltammogram shapes evidence that for the inclusion compounds 1- 3 electron transfer reactions proceed within the cavity of the host.     

Pt(II)-mediated nitrile-tetramethylguanidine coupling as a key step for a novel synthesis of 1,6-dihydro-1,3,5-dihydrotriazines

The coupling between tetramethylguanidine, HN=C(NMe2)2, and coordinated organonitriles in the platinum(II) complexes cis/trans-[PtCl2(RCN)2] (R = Me, Et, Ph) proceeds rapidly under mild conditions to afford the diimino compounds containing two N-bound monodentate 1,3-diaza-1,3-diene ligands [PtCl2{NH=C(R)N=C(NMe2)2}2] (R = Et, trans-1; R = Ph, trans-2; R = Me, cis-3; R = Et, cis-4), and this reaction is the first observation of metal-mediated nucleophilic addition of a guanidine to ligated nitrile. Complexes 1-4 were characterized by elemental analyses (C, H, N), X-ray diffraction, FAB mass spectrometry, IR, and 1H and 13C{1H} NMR spectroscopies; assignment of signals from E/Z-forms of 1,3-diaza-1,3-diene ligands and verification of routes for their Z right harpoon over left harpoon E isomerization in solution were performed using 2D 1H,1H-COSY, 1H,13C-HETCOR, and 1D NOE NMR experiments. The newly formed and previously unknown 1,3-diaza-1,3-dienes NH=C(R)N=C(NMe2)2 were liberated from the platinum(II) complexes [PtCl2{NH=C(R)N=C(NMe2)2}2] (1-3) by substitution with 2 equiv of 1,2-bis-(diphenylphosphino)ethane (dppe) to give the uncomplexed HN=C(R)N=C(NMe2)2 species (5-7) in solution and the solid [Pt(dppe)2](Cl)2. The former were utilized in situ, after filtration of the latter, in the reaction with 1,3-di-p-tolylcarbodiimide, (p-tol)N=C=N(tol-p), in CDCl3 to generate (6E)-N,N-dimethyl-1-(4-methylphenyl)-6-[(4-methylphenyl)imino]-1,6-dihydro-1,3,5-triazin-2-amines) (8-10) due to the [4 + 2]-cycloaddition accompanying elimination of HNMe2. The formulation of 8-10 is based on ESI-MS, 1H, 13C{1H} NMR, and X-ray crystal structures determined for 9 and 10. The reaction of 1,3-diaza-1,3-dienes with 1,3-di-p-tolylcarbodiimide, described in this article, constitutes a novel synthetic approach to a useful class of heterocyclic species like 1,6-dihydro-1,3,5-triazines.     

On the mechanism of formation of isotactic and syndiotactic polydiolefins

The mode of formation of isotactic and syndiotactic polymers from 1,3-dienes is examined in the light of the most recent results. An interpretation is given for the formation of trans-1,4 isotactic polymers from CH₂=CH-CH=CHR (R = Me, Et, Pr, etc.) type monomers with heterogeneous VCl₃-based catalysts. Evidence is reported showing that stereoregular 1,2 or cis-1,4 polymers derive from a growing polymer chain anti-η³-bonded to the transition metal and a cis-η⁴ coordinated monomer. The influence on stereoselectivity of the substituents at the central carbon atoms of the monomer is discussed. The peculiar behavior of (Z)-1,3-pentadiene and 4-methyl-1,3-pentadiene, which give 1,2 polymers with catalysts that give 1,4 polymers from other monomers, is attributable to the fact that they can coordinate trans-η², in addition to cis-η⁴.     

Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

Ligand substitution behavior of a simple model for coenzyme B12

The ligand substitution reactions of trans-[CoIII(en)2(Me)H2O]2+, a simple model for coenzyme B12, were studied for cyanide and imidazole as entering nucleophiles. It was found that these nucleophiles displace the coordinated water molecule trans to the methyl group and form the six-coordinate complex trans-[Co(en)2(Me)L]. The complex-formation constants for cyanide and imidazole were found to be (8.3 +/- 0.7) x 10(4) and 24.5 +/- 2.2 M-1 at 10 and 12 degrees C, respectively. The second-order rate constants for the substitution of water were found to be (3.3 +/- 0.1) x 10(3) and 198 +/- 13 M-1 s-1 at 25 degrees C for cyanide and imidazole, respectively. From temperature and pressure dependence studies, the activation parameters delta H++, delta S++, and delta V++ for the reaction of trans-[CoIII(en)2(Me)H2O]2+ with cyanide were found to be 50 +/- 4 kJ mol-1, 0 +/- 16 J K-1 mol-1, and +7.0 +/- 0.6 cm3 mol-1, respectively, compared to 53 +/- 2 kJ mol-1, -22 +/- 7 J K-1 mol-1, and +4.7 +/- 0.1 cm3 mol-1 for the reaction with imidazole. On the basis of reported activation volumes, these reactions follow a dissociative mechanism in which the entering nucleophile could be weakly bound in the transition state.     

Stereospecific synthesis of polysubstituted E-olefins by reaction of acyclic nitrones with free and platinum(II) coordinated organonitriles

Free nitriles NCCH2R (1a R = CO2Me, 1b R = SO2Ph, and 1c R = COPh) with an acidic alpha-methylene react with acyclic nitrones -O+N(Me)=C(H)R' (2a R' = 4-MeC6H4 and 2b R' = 2,4,6-Me3C6H2), in refluxing CH2Cl2, to afford stereoselectively the E-olefins (NC)(R)C=C(H)R' (3a-3c and 3a'-3c'), whereas, when coordinated at the platinum(II) trans-[PtCl2(NCCH2R)2] complexes (4a R = CO2Me and 4b R = Cl), they undergo cycloaddition to give the (oxadiazoline)-PtII complexes trans-[PtCl2{N=C(CH2R)ON(Me)C(H)R'}2] (R = CO2Me, Cl and R' = 4-MeC6H4, 2,4,6-Me3C6H2) (5a-5d). Upon heating in CH2Cl2, 5a affords the corresponding alkene 3a. The reactions are greatly accelerated when carried out under focused microwave irradiation, particularly in the solid phase (SiO2), without solvent, a substantial increase of the yields being also observed. The compounds were characterized by IR and 1H, 13C, and 195Pt NMR spectroscopies, FAB+-MS, elemental analyses and, in the cases of the alkene (NC)(CO2Me)C=C(H)(4-MeC6H4) 3a and of the oxadiazoline complex trans-[PtCl2{N=C(CH2Cl)ON(Me)C(H)(4-C6H4Me)}2] 5c, also by X-ray diffraction analyses.     

Direct synthesis of (imine)platinum(II) complexes by iminoacylation of ketoximes with activated organonitrile ligands

The metal-mediated iminoacylation of ketoximes R1R2C=NOH (1a R1 = R2 = Me; 1b R1 = Me, R2 = Et; 1c R1R2 = C4H8; 1d R1R2 = C5H10) upon treatment with the platinum(II) complex trans-[PtCl2(NCCH2CO2Me)2] 2a with an organonitrile bearing an acceptor group proceeds under mild conditions in dry CH2Cl2 to give the trans-[PtCl2{NH=C(CH2CO2Me)ON=CR1R2}2] 3a-d isomers in moderate yield. The reaction of those ketoximes with trans-[PtCl2(NCCH2Cl)2] 2b under the same experimental conditions gives a 1 : 1 mixture of the isomers trans/cis-[PtCl2{NH=C(CH2Cl)ON=CR1R2}2] 3e-h and 4e-h in moderate to good yield. These reactions are greatly accelerated by microwave irradiation to give, with higher yields (ca. 75%), the same products which were characterized by IR and 1H, 13C and 195Pt NMR spectroscopies, FAB-MS, elemental analysis for the stable trans isomers, and X-ray diffraction analysis (3f). The diiminoester ligand in 3a was liberated upon reaction of the complex with a diphosphine.     

Isolation and characterization of nongeminal cyclic methylphenylphosphazene tetramers

Heating pure samples of the cyclic phosphazenes, cis- or trans-[Me(Ph)PN](3), yielded mixtures of the cis and trans isomers of the cyclic phosphazene trimers, [Me(Ph)PN](3), and all four geometric isomers of the tetramers, [Me(Ph)PN](4). Varying the temperature and heating times changes the ratio of these components. Following the thermolysis by NMR spectroscopy indicated that only a mixture of the two isomeric trimers occurred initially. Longer heating times produced mixtures of the isomers of the tetramer. Column chromatography and solubility differences were used to separate each of the isomers of the tetramer. Spectroscopic and X-ray crystallographic studies suggest that the four different geometrical isomers of the tetramer can be described as cone, partial cone, 1,2-alternate, and 1,3-alternate by analogy to calix[4]arene.