纳米稀土氧化物/硫酸酯化壳聚糖杂化材料的制备及其抗凝血性能研究

利用接枝的方法制备了4 种纳米RE₂O₃/硫酸酯化壳聚糖杂化材料(Nd₂O₃-TDI-CS, Eu₂O₃-TDI-CS, La₂O₃-TDI-CS, Sc₂O₃-TDI-CS, TDI=甲苯二异氰酸酯, CS=壳聚糖), 用红外光谱、热重分析和扫描电镜表征了产物, 结果表明壳聚糖接枝于经过活化后的纳米氧化物表面. 抗凝血实验结果和复钙实验结果说明制备的4种杂化材料比纳米稀土氧化物具有更好的抗凝血性能.     

开链冠醚席夫碱-稀土配合物的合成、表征及抑菌活性研究

合成了三个新型开链冠醚席夫碱-稀土离子三元配合物RE(H2L)(Mq)(NO3)3,其中RE=Nd3 、Er3 、Yb3 ,配体H2L=N,N′-双(邻羟苯亚甲基)-3,6-二氧杂-1,8-二氨基辛烷,Mq为8-羟基喹哪啶。采用元素分析、IR、UV-Vis、热重-差热分析(TG-DTG)等手段对配合物的组成结构进行了表征。抑菌活性实验表明,三种配合物对大肠杆菌有很好的抑菌效果,对金黄色葡萄球菌的抑菌效果较弱。     

纳米氧化鏑/壳聚糖杂化材料的制备和抑菌性研究

用甲苯-2,4-二异氰酸酯(TDI)为功能化试剂,经过一定的物理﹑化学方法处理,使纳米氧化鏑和壳聚糖(CS)以TDI作为桥梁合成新材料DTC(Dy2O3-TDI-CS).重点研究了该材料对金黄色葡萄球菌和大肠杆菌的抑菌性能以及最低抑菌浓度(MIC),并且与壳聚糖的抑菌性进行了对比.实验表明该材料比壳聚糖有更好的抑菌性,...     

功能化高分子磁性载体的制备及选择性吸附稀土离子

悬浮聚合法制备含四氧化三铁微粒的甲基丙烯酸羟乙酯聚合物, 再由环氧化和氨基化反应得到功能化高分子磁性载体(FPMC), 采用酸渗实验、红外光谱和X-光电子能谱(XPS)等对产物进行性能表征;研究FPMC对RE3+离子( RE=La, Eu, Y)的选择性吸附作用, 进而探讨稀土离子浓度对载体FPMC吸附效果的影响.     

纳米Eu2O3/硫酸酯化壳聚糖杂化材料的制备及其抗凝血性能研究

利用表面接枝的方法制备了纳米Eu2 O3/硫酸酯化壳聚糖杂化材料,并用IR,TG和SEM等方法对产物进行了表征,结果表明硫酸酯化壳聚糖接枝在了经过活化后的纳米氧化物表面,细胞毒性实验证明材料具有较低的细胞毒性和较好的细胞相容性.抗凝血实验说明材料具有良好的抗凝血性能.表面接枝方法提高了壳聚糖类化合物的抗凝作用,弥补了比...     

聚喹啉/十八胺/稀土杂多阴离子杂化LB膜的制备、结构及电性质

将聚喹啉(PQ)、十八胺(OA)和含稀土元素的1;11钨系双系列杂多阴离子RE(PW₁₁O₃₉)₂^11-(RE=Ce^Ⅲ,Eu^Ⅲ,Gd^Ⅲ)通过LB技术掺杂,成功地制备了三种PQ/OA/稀土杂多阴离子杂化LB膜,通过π-A曲线、荧光、吸收光谱和原子力显微镜等手段对PQ/OA/稀土杂多阴离子杂化LB膜的成膜方式、性能、结构及形貌进行了表征;扫描隧道显微镜研究表明,将稀土杂多化合物掺杂到聚喹啉中可使聚喹啉的导电性明显增强.     

庆大霉素对羟基磷灰石/壳聚糖复合材料性能的影响

羟基磷灰石/壳聚糖-庆大霉素(HA/CS-G)缓释材料为骨髓炎的定点缓释给药提供了一种有效的局部药物缓释体系。为了研究抗生素对羟基磷灰石/壳聚糖材料性能的影响,采用共沉淀法制备了HA/CS-G缓释材料。利用红外光谱(IR)、X射线衍射(XRD)和扫描电子显微镜(SEM)对材料进行了表征。以不载药的羟基磷灰石/壳聚糖(HA/CS)为对照,研究了庆大霉素对HA/CS复合材料抑菌性能、力学性能和降解性能等的影响。实验结果表明,HA/CS-G有良好的抑菌效果。负载庆大霉素后HA/CS的机械强度明显增强,而材料的降解速率有所下降。本文采用的二次成型技术显著增大了材料的机械强度。     

基于壳聚糖/TiO2新型杂化材料的过氧化氢传感器

制备了一种新型有机-无机杂化材料,这种杂化材料由二氧化钛溶胶和壳聚糖组成,此杂化材料克服了普通溶胶-凝胶易脆裂的特点,可以有效地保留被包埋的 Hb 生物催化活性;而且碳纳米管和纳米铜的协同效应提高了对过氧化氢的催化性能和促进了电子的传递.研究了各种因素对传感器响应电流的影响.对过氧化氢响应线性范围 1.0×10-7～1...     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维(CNFs)作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼(MoS_2)纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS_2纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS_2/CNFs杂化材料的电催化析氢性能(HER)进行研究,研究表明近似皮芯结构的MoS_2/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110m V·dec~(-1)。     

聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料的制备与表征

采用2,2,6,6-四甲基-1-哌啶氧化物(TEMPO)的溴盐对化学共沉淀法制备的Fe3O4纳米粒子进行表面修饰,以该粒子为过氧引发剂,苯乙烯(St)、马来酸酐(MA)为单体,采用"活性"/可控自由基聚合技术在粒子表面原位引发聚合,制备了聚(苯乙烯-马来酸酐)/Fe3O4纳米杂化材料,并对纳米Fe3O4及杂化材料进行了FT-IR、XRD、TGA、TEM和GPC表征。结果表明,所制备的纳米杂化材料的平均粒径约为70 nm,磁性粒子表面的聚合物分子链随着聚合时间的增长而增长。振动样品磁强计测试结果显示,在室温、外加磁场下,该纳米杂化材料呈现超顺磁性,饱和磁化强度随着包覆聚合物量的增加而降低。     

Synthesis and structure of hydroxyisoxazolidines and derivatives of hydroxylamine and alkenals

The reactions of N-substituted hydroxylamines with alkenals serve as a method for the synthesis of the corresponding 2-substituted 3(5)-hydroxyisoxazolidines. The reaction pathway is determined by the nature of the substituent attached to the nitrogen atom. Ring-chain isomerism has been detected in these newly obtained compoundsTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1270–1276, September, 1987.     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

Mass and NMR spectra of haplophyllidine and perforine and of their derivatives

Conclusions The mass and NMR spectra of haplophyllidine, perforine, and their derivatives have been studied. The influence of the open and cyclic forms of the molecular ion on the nature of the fragmentation has been discussed. The main routes of fragmentation of the compounds considered are due to the presence of substituents at C₈ and C₄.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 4, pp. 273–279, 1969     

Investigation of adhesion and mobility of polyurethane and epoxy-rubber glues and adhesives

The values of activation parameters in uncured and cured epoxy resins, rubbers, and blends thereof are investigated. The dependences of activation energy and adhesion strength of epoxy-rubber compositions on rubber content are determined. The correlation of adhesion and activation energy values for polyurethane rubber and epoxy-rubber compositions is shown.     

Crystal and molecular structure of aroyl- and acetylhydrazones of acet- and benzaldehydes

Aroyl- and acetylhydrazones of acet- (I) and benzaldehydes (IV) and benzoylhydrazones of acet- (II) and benzaldehydes (III) were studied by x-ray structural and quantum-chemical methods in order to establish their structures. Compund (I) was the EEZ structure in the crystal. Calculations and spectral data showed that the EEE form occurs in nonpolar solvents and in the gas phase. According to crystallographic data molecules (I)–(IV) are the E-isomers (relative to the N-N bond) and the hydrazone fragments are planar. Intermolecular N-H...O H-bonds from in the crystals. The data obtained suggest that the majority of acylhydrazones are conformationally rigid on dissolution although exceptions do occur. Apparently the reasons for the difference of acetyl- and benzoylhydrazones in electrocarboxylation reactions are electronic and not steric factors.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 75–81, January, 1991.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.