Characterization of polycyclic aromatic hydrocarbons and carbonyl compounds in diesel exhaust emissions

Exhaust emissions from a recent model heavy-duty diesel vehicle (city bus) in a chassis dynamometer were measured during a transient driving cycle. Particle-bound polycyclic aromatic hydrocarbons (PAHs) and gaseous carbonyls, substances that create health hazards and are, as yet, unregulated were collected, the former on filters and the latter on dinitrophenylhydrazine (DNPH)-coated silica cartridges and analysed by GC-MS and HPLC, respectively. PAH emission rates decreased with the number of benzene fused rings. They averaged 0.2 mg km(-1) for a total of 11 PAHs ranging from fluoranthene to benzo(ghi)perylene. Fluoranthene and pyrene accounted for 90% of total PAHs. The sum of emission rates of C1 approximately C6 carbonyls averaged 174 mg km(-1), even if formaldehyde alone represented approximately 70% of the total carbonyl mass, followed by acetaldehyde (13%). Results obtained were compared with emission data reported in previous studies.     

Quantification of 21 metabolites of methylnaphthalenes and polycyclic aromatic hydrocarbons in human urine

Polycyclic aromatic hydrocarbons (PAHs) and their alkylated derivatives, such as methylnaphthalenes (MeNs), are harmful pollutants ubiquitously present in the environment. Exposure to PAHs has been linked to a variety of adverse health effects and outcomes, including cancer. Alkyl PAHs have been proposed as petrogenic source indicators because of their relatively high abundance in unburned petroleum products. We report a method to quantify 11 urinary methylnaphthols (Me-OHNs), metabolites of 1- and 2-methylnaphthalenes, and 10 monohydroxy PAH metabolites (OH-PAHs), using automated liquid-liquid extraction and isotope dilution gas chromatography tandem mass spectrometry (GC-MS/MS). After spiking urine (1 mL) with ¹³C-labeled internal standards, the conjugated target analytes were hydrolyzed enzymatically in the presence of ascorbic acid. Then, their free species were preconcentrated into 20 % toluene in pentane, derivatized and quantified by GC-MS/MS. The 11 Me-OHNs eluted as 6 distinct chromatographic peaks, each representing 1???3 isomers. Method detection limits were 1.0? 41 pg/mL and the coefficients of variation in quality control materials were 4.7???19 %. The method was used to analyze two National Institute of Standards and Technology’s Standard Reference Materials® and samples from 30 smokers and 30 non-smokers. Geometric mean concentrations were on average 37 (Me-OHNs) and 9.0 (OH-PAHs) fold higher in smokers than in non-smokers. These findings support the usefulness of Me-OHNs as potential biomarkers of non-occupational exposure to MeNs and sources containing MeNs.

Quantification of several monohydroxylated metabolites of polycyclic aromatic hydrocarbons in urine by high-performance liquid chromatography with fluorescence detection

A high-performance liquid chromatographic method with fluorescence detection has been developed to determine the urinary polycyclic aromatic hydrocarbon metabolites 2-hydroxynaphthalene, 2-hydroxyfluorene, 9-hydroxyphenanthrene, 1-hydroxypyrene and 3-hydroxybenz[a]pyrene. Solid phase extraction (SPE) was used to clean up the samples, and washing with 30% methanol was found to be the best way to remove interferences in the matrix. The method detection limits ranged from 0.044 μg/L for 1-hydroxypyrene to 1.615 μg/L for 3-hydroxybenz[a]pyrene, and the recoveries ranged between 40% for 3-hydroxybenz[a]pyrene and 99% for 2-hydroxynaphthalene. The within-day relative standard deviation was lowest for 2-hydroxynaphthalene at 0.67% and went up to 2.42% for 3-hydroxybenz[a]pyrene, and the between-day relative standard deviation ranged from 3.84% for 9-hydroxyphenanthrene to 10.42% for 2-hydroxyfluorene. The correlation coefficients were between 0.9962 and 0.9998. The developed method was successfully used to analyze samples from student volunteers in a high school.     

Determination of polycyclic aromatic hydrocarbons in limpet samples

Summary An HPLC method with UV and programmed fluorescence detection has been optimized and used to evaluate the levels of contamination of PAHs in lightly contaminated biota samples. A specific stationary phase was used that offers high selectivity for PAH separation. The proposed method was applied to limpet samples from Fuerteventura (Canary Island) with good results.     

Fluidized-bed extraction of polycyclic aromatic hydrocarbons from contaminated soil samples

Summary Due to the carcinogenity and ubiquity of polycyclic aromatic hydrocarbons in the environment they are of ongoing interest to analytical chemistry. In this study, a comparison of the classic Soxhlet extraction and, fluidized-bed extraction, has been conducted. The extraction of polycyclic aromatic hydrocarbons by this technique has been optimized considering as experimental variables the variation of the number of extraction cycles and the holding time after reaching the heating temperature by means of a surface response design. The significance of the operational parameters of the fluidized-bed extraction on the performance characteristics has been investigated. For the determination of the analytes a selective clean-up of the extracts followed by a fast gas chromatography method with mass spectrometric detection was used, resulting in low limits of detection (0.2 pg μL⁻¹). The accuracy of the complete analytical method was established by extraction and analysis of reference materials.     

Microwave assisted extraction of polycyclic aromatic hydrocarbons from atmospheric particulate samples

For several years, microwave assisted extraction (MAE) was applied to extract organic compounds such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls, etc., from soils, sediments and standard reference materials. Very few authors applied this methodology for the extraction of PAHs from atmospheric particulate matter. In the present study, MAE of polycyclic aromatic hydrocarbons with hexane/acetone (1:1) from real atmospheric particulate samples was investigated and the effect of microwave energy and irradiation time studied. The yields of extracted compounds obtained by microwave irradiation were compared with those obtained using traditional Soxhlet extraction. MAE was evaluated using spiked real atmospheric particulate samples and two standard reference materials. Analytical determinations of PAHs were carried out by high performance liquid chromatography (HPLC) with ultraviolet and fluorescence detection. The best recoveries were achieved with a microwave energy of 400 W and an irradiation time of 20 min.     

Determination of polycyclic aromatic hydrocarbons in water samples using high-performance liquid chromatography with amperometric detection

The determination of polycyclic aromatic hydrocarbons (PAHs) using high-performance liquid chromatography (HPLC) with UV and fluorescence detection has been well established. Although most of the PAHs can be detected by these methods, some environmentally important polyaromatic compounds, such as acenaphthylene, do not show fluorescence and can only be determined by UV detection at higher concentrations. A sensitive and selective determination of acenaphthylene, acenaphthene and the six PAHs listed in the TVO, the German drinking water standard, is also possible by amperometric detection following HPLC separation. The method was applied to the determination of PAHs in different water samples after solid-phase extraction (SPE). The efficiency of the amperometric determination was found to be superior to UV detection (λ = 300 nm).     

Coupled-column high-performance liquid chromatographic method for the determination of 1-hydroxypyrene in urine of subjects exposed to polycyclic aromatic hydrocarbons

A coupled-column high-performance liquid chromatographic system for integrated, on-line sample processing and the determination of free and conjugated 1-hydroxypyrene in urine has been developed. The method is based on a “tailor-made” copper phthalocyanine-modified porous-glass precolumn packing material, which allows a direct and repeated injection of urine samples and a selective enrichment of trace amounts of particular components. The fully automated method has a low detection limit (0.01 pmol), a quantitative and matrix-independent recovery and a highly reliability, as shown by an interlaboratory comparison of methods.     

Integration of the cleanup process: pretreatment of polycyclic aromatic hydrocarbons from diesel exhaust particles on silica gel beads in a microchannel.

This paper presents an integrated microfluidic system that performs cleanup for polycyclic aromatic hydrocarbons (PAHs) from diesel exhaust particles on silica gel beads in a microchip. A column chromatography phase was constructed by filling the silica gel beads into a microchannel that had a dam structure 25 microm high. The height of the dam structure was determined according to the rate of the wet etching. This work on the cleanup of PAHs from diesel exhaust particles showed that the microchip-based system has the same performance as the conventional method on the solid phase extraction column and has some advantages, such as less reagent consumption and shorter pretreatment time, over the conventional method.     

HPLC analysis of the large polycyclic aromatic hydrocarbons in a diesel particulate

Summary High performace liquid chromatography (HPLC) was used to separate the large polycyclic aromatic hydrocarbons in a diesel particulate extract. Identification of individual peaks was made using a photodiode array UV/visible detector to collect their absorbance spectra. Comparisons between standard compounds and the peaks were made using both retention times and spectra. Compounds of up to 10 rings were identified.     

Fast chromatographic determination of polycyclic aromatic hydrocarbons in aerosol samples from sugar cane burning

The influence of the pH on the complexation equilibria between (S)- or (R)-alprenolol and the cellulase Cel7A was investigated by isothermal titration calorimetry. The results obtained agree with those of previous, similar studies of the same equilibria in which the protein was immobilized on silica particles, packed in a chromatographic column. The association constant and the complexation enthalpy and entropy of the (S)-enantiomer increase with increasing pH. For (R)-alprenolol, the binding is endothermic at all pH values. Thus, for both enantiomers in the pH range 5.5-6.8, the binding is an entropically driven process.     

Shpol''skii fluorimetric determination of polycyclic aromatic hydrocarbons in complex environmental samples

Summary High-resolution fluorimetry in low-temperature n-alkane Shpol'skii matrices is a powerful technique for the analysis of rigid, non-polar compounds like polycyclic aromatic hydrocarbons. Because of the method's sensitivity and selectivity, sample clean-up, preconcentration and even chromatographic separation can often be left out. The Shpol'skii analysis of pyrene in crude extracts from marine sediments and from bird meat is demonstrated. Special attention is focussed on the extra possibilities acquired when a laser is used as excitation source (Laser Excited Shpol'skii Spectroscopy, LESS).     

Acid-induced cloud point extraction and preconcentration of polycyclic aromatic hydrocarbons from environmental solid samples

Liquid chromatography coupled to electrospray-mass spectrometry (LC-ES-MS) with positive ion detection was evaluated for the determination of tributyltin and triphenyltin in water samples using tripropyltin as internal standard. The separation was performed in the isocratic mode on a silica-based C18 column with a mobile phase containing 0.02% trifluoroacetic acid in acetonitrile-water (50:50, v/v). The optimum LC-ES-MS conditions were established and quantification was performed on the basis of the [M]+ ions. Limits of detection for standard solutions were 100 and 200 pg Sn injected for triphenyltin and tributyltin, respectively, and good reproducibility was observed. Solid-phase extraction was carried out on C18 cartridges to preconcentrate the analytes from natural water samples, with recoveries ranging from 80 to 110%. Limits of detection for SPE-LC-ES-MS were in the range of low ng l(-1), which demonstrates the suitability of the method for environmental samples.     

Liquid chromatographic method with fluorescence detection for the determination of polycyclic aromatic hydrocarbons in environmental samples

A method for the determination of some polynuclear aromatic hydrocarbons (PAHs) in water samples and air filters is presented. Samples were extracted with light petroleum-diethyl ether (85 + 15) and the extracts were concentrated before analysis. Reversed-phase liquid chromatography with fluorescence detection was applied to separate and determine the PAHs. Recoveries of individual PAHs from spiked water samples were 0.16–0.27 ng ml^?1. Detection limits in the picogram range were obtained for each compound.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from liver samples and determination by HPLC-FL

An extraction/clean-up procedure by SFE was developed for isolating PAHs from liver samples for subsequent HPLC-FL determination of ten PAHs in the enriched extract. Recoveries (90-115%) and RSD % (< or =7.7) were satisfactory. When applied to 11 samples of bird of prey (Tyto alba) protected species and classified of special interest, from the Galicia (Northwest to Spain), benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were undetectable; chrysene and benzo[a]pyrene are only detected in one sample; benzo[a]anthracene and benzo[k]fluoranthene are only quantified in one sample and benzo[b]fluoranthene in two samples. The other PAHs, anthracene, fluoranthene and pyrene are present in almost all the samples.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from liver samples and determination by HPLC-FL

An extraction/clean-up procedure by SFE was developed for isolating PAHs from liver samples for subsequent HPLC-FL determination of ten PAHs in the enriched extract. Recoveries (90–115%) and RSD % (≤ 7.7) were satisfactory. When applied to 11 samples of bird of prey (Tyto alba) protected species and classified of special interest, from the Galicia (Northwest to Spain), benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were undetectable; chrysene and benzo[a]pyrene are only detected in one sample; benzo[a]anthracene and benzo[k]fluoranthene are only quantified in one sample and benzo[b]fluoranthene in two samples. The other PAHs, anthracene, fluoranthene and pyrene are present in almost all the samples.