聚苯乙烯基N-甲基-N-酰基磺酰胺树脂的制备及其作为酰基转移试剂在酰胺合成中的应用

聚苯乙烯基磺酰氯树脂(树脂1)与甲胺水溶液在吡啶的催化作用下反应，制备了N—甲基磺酰胺树脂(树脂2)．用酰氯在吡啶中与树脂2反应，得到N—酰基—N—甲基磺酰胺树脂(树脂3)．树脂3作为胺底物的酰基转移试剂，用来制备N—取代的酰胺，收率14～81％．树脂3可以有选择性地酰化乙醇胺中的氨基而不会使羟基酰化。     

5-Bromobarbituric Acid : A Mild and Selective Monobrominating Agent Employed in the Synthesis of the Gastrin Antagonist GR174152

5-Bromobarbituric acid (5) is a convenient reagent for the selective bromination of cyclic imine 3. A facile, in situ synthesis of this reagent involving a disproportionation reaction between barbituric acid and dibromobarbituric acid is described.     

UPS on Weinreb resin: a facile solid-phase route to aldehyde and ketone derivatives of "unnatural" amino acids and peptides

The solid-phase synthesis of "unnatural" amino aldehydes, amino ketones, peptide aldehydes, and peptide ketones was accomplished from commercially available resin in a series of room temperature reactions. The initial step involved addition of an "unnatural" side chain to the N-terminus of a benzophenone imine-activated Weinreb resin-bound amino acid or peptide derivative. The alkylated imine was hydrolyzed, and the amine was converted to the Boc-, Cbz-, or naphthoyl derivative. The resin-bound substrate was then cleaved with DIBAL-H or a Grignard reagent to give the amino aldehyde, amino ketone, peptide aldehyde, or peptide ketone products. Twenty-four reactions were carried out simultaneously using a "Billboard" reaction apparatus to give products in 27-87% (59% average) isolated yield.     

Asymmetric total synthesis of antileukemic sesquiterpene (+)-ivalin

The one-pot double alkylation reaction of a chiral α,β-unsaturated imine (6) with isopropenyl Grignard reagent followed by methyl iodide has been shown to proceed highly asymmetrically. Subsequent stereoselective transformation of the derived adduct (10) has culminated in a first asymmetric total synthesis of the optically pure eudesmane sesquiterpene (+)-ivalin (1).     

Practical enantioselective synthesis of beta-substituted-beta-amino esters

[reaction: see text] A practical, large-scale synthesis of a beta-amino ester 1 was developed. A chiral imine derived from (S)-phenylglycinol and 3-trimethylsilylpropanal was coupled with the Reformatsky reagent 3 with high diastereoselectivity (de > 98%) to give (SS)-4a as the major isomer. The amino alcohol residue of the coupling product 4 was oxidatively cleaved with sodium periodate in the presence of methylamine. An unusual selective oxidative cleavage of the (SS)-isomer was observed and the imine 6 was obtained with ee > 99% while the (RS)-4b isomer was not cleaved. Reaction with p-toluenesulfonic acid monohydrate allowed for the hydrolysis of the imine and the isolation of the amine as its salt. The title compound 1 was then obtained by transesterification, desilylation, and hydrochloride salt formation in a one-pot process. The method was successfully applied toward the synthesis of a wide variety of beta-amino esters.     

Role of cyclic dithiocarbonate as a promoter in the reaction of epoxide and imine in the presence of water

It was demonstrated that the reaction of epoxide and imine as a latent initiator under highly humid conditions was accelerated by addition of 5‐phenoxymethyl‐1,3‐oxathiolane‐2‐thione ( 1 ). When 1 was added to a mixture of glycidyl phenyl ether and an imine, the reaction of the epoxide with an amine released from the imine became faster than was the case without 1 , that is, 1 worked as a promoter of the reaction. The curing rate and initial adhesive strength of epoxy resin increased compared with that without 1 . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4276–4283, 2004     

基于可逆动态共价化学的新型可修复、可回收、可加工环氧树脂

利用生物来源的二聚脂肪酸为原料,合成了二聚酸酰肼和二聚酸酰腙两种衍生物,并进一步以其作为环氧E-44树脂固化剂,得到了新型的含动态共价连接的热固性环氧树脂。采用傅里叶红外光谱(FT-IR)、差式扫描量热(DSC)、扫描电子显微镜(SEM)、热重(TG)和动态力学分析(DMA)等多种测试手段对环氧树脂固化过程以及固化后材料的结构与性能关系进行了详细表征,特别研究了动态亚胺键对热固性环氧树脂性能的独特影响。结果表明:与传统环氧树脂相比,改性后的环氧树脂有更好的韧性,且其玻璃化转变温度及热稳定性没有明显下降。在升温和加压的条件下,酸可催化亚胺键的动态交换反应,赋予传统环氧树脂以全新的可修复、可回收与可多次加工性能。     

Carbon-carbon bond formation via a tandem cationic 2-aza-Cope rearrangement-Lewis acid promoted Petasis reaction

Potassium alkynyltrifluoroborates and potassium (2-phenyl)vinyltrifluoroborates react with N-3-butenyl-(2,2-dichloro-1-propylidene)amine in the presence of BF₃·Et₂O as a Lewis acid to synthesize rearranged Mannich products. The reaction starts with a cationic 2-aza-Cope rearrangement of the imine, followed by the Lewis acid promoted borono-Mannich-type reaction on the rearranged imine to result in a new class of functionalized N-homoallylamines.     

Convenient preparation of O-linked polymer-bound N-substituted hydroxylamines, intermediates for synthesis of N-substituted hydroxamic acids

[reaction: see text] An efficient procedure for preparation of O-linked polymer-bound N-substituted hydroxylamines by reduction of resin-bound oximes with borane.pyridine complex in the presence of dichloroacetic acid is reported. Other reducing systems commonly used for imine or oxime reduction were ineffective, including borane.pyridine in the presence of acetic acid. Oximes derived from a variety of aromatic and aliphatic aldehydes and ketones were successfully reduced. The N-substituted products were acylated and cleaved from resin to afford N-substituted hydroxamic acids.     

Synthesis and characterization of chiral iron carbonyl complexes from imine ligands with carbohydrates and amino acids as substituents

Imine ligands derived from 6-amino-6-desoxy-1,2,3-O-trimethyl--d-glucopyranose or from various amino acid esters react with Fe₂(CO)₉ to give chiral iron carbonyl complexes. Derivatives produced from benzaldehyde react via a C–H activation reaction in ortho-position with respect to the exocyclic imine substituent followed by an intramolecular hydrogen transfer reaction of the activated hydrogen towards the former imine carbon atom. The molecular structure of the diiron hexacarbonyl complexes of benzylideneamino-l-phenylalanine ethyl ester and benzylideneamino-l-methionine methyl ester were characterized by means of X-ray structure determinations. Imines produced from cinnamaldehyde upon reaction with Fe₂(CO)₉ produce mononuclear iron tricarbonyl complexes with the imine ligand being coordinated in a η⁴-fashion.     

Synthesis of Stannylated Aryl Imines and Amines via Aryne Insertion Reactions into Sn−N Bonds

The reaction of in situ generated arynes with stannylated imines to provide ortho-stannyl-aniline derivatives is reported. The readily prepared trimethylstannyl benzophenone imine is introduced as an efficient reagent to realize the aryne σ-insertion reaction. The imine functionality is an established N-protecting group and insertions proceed with good yields and good to excellent regioselectivities. The product anilines are valuable starting materials for follow-up chemistry thanks to the rich chemistry offered by the trimethylstannyl moiety.     

Kinetics of Neutralization of Weak Electrolyte Ion-Exchange Resins

The adsorption of acids and alkalis by weak electrolyte resins is described by diffusion of the ions through the resin bead, with an accompanying neutralization reaction. A model proposed by Helfferich has been extended to account for the situation where the solution concentration of the reagent is changing during the rate experiment. Two mechanisms are necessary, depending on the concentration of the reagent. The rate expression for systems where the reagent concentration is greater than 0.01 M is given. It predicts that the adsorption rate is dependent on the solution hydrogen ion concentration in the case of weakly basic resins, and that it varies inversely with the square of the particle radius. The rate should also be unchanged by the resin of added salt.

Experimental evidence in the form of rate data for the uptake of hydrochloric acid by a commercial weakly basic resin support the derived equation, which can be modified further to account for the diffusional resistance of the liquid film around the resin particle.     

Synthesis of cyclo-PLAI using a combination of solid- and solution-phase methods

Cyclo-PLAI was successfully synthesized using a combination of solid- and solution-phase methods. This current synthesis was found to be faster than the previously reported synthesis for the cyclic peptide. The linear precursor was synthesized on 2-chlorotrityl resin with Fmoc/t-Bu strategy. HATU/HOAt was employed as the coupling reagent in the amide bond formation on the resin. Cyclization of the linear precursor was experimented with HATU/HOAt reagents with different conditions. However, the linear precursor was best cyclized using HATU reagent in DIPEA by stirring the reaction mixture at 0?°C for 1?h and followed by stirring the reaction mixture at room temperature for 30?min, giving the cyclic product in 70% yield (calculated from the linear peptide). Both linear and cyclic products were characterized using HR-TOF-ESMS, ¹H-NMR, ¹³C-NMR, and compared with previously reported spectral data for the cyclic product.     

Preparation of Polystyrene-supported N-phenyl-N-acyl Sulfonamide Resin and its Application in Solution-phase Synthesis of Amides

Polystyrene-supported N-phenyl-N-acyl sulfonamide resin was prepared by reacting polystyrene sulfonyl chloride resin with aniline and acylating in pyridine with either acid chlorides or anhydrides. Then, this resin was utilized as a new type of acyl transfer reagent to synthesize the amide library. It was approved to be a more effective acyl transfer reagent with higher amide yields than the polystyrene-supported N-methyl-N-acyl sulfonamide resin and N-benzyl-N-acyl sulfonamide resin. When the phenyl group bonded to the N atom on N-phenyl-N-acyl sulfonamide resin was substituted by the electron withdrawing group or electron donating group, a decreasing amide yield was obtained. N-phenyl-N-acyl sulfonamide resin could be regenerated many times.     

保幼激素类似物11-甲氧基-3,7,11-三甲基-2,4-十二碳二烯酸异丙酯的简便全合成

从价廉的丙酮出发,首先经羟醛缩合、脱水、氧化、酯化、溴代反应合成了4-溴-3-甲基-2-丁烯酸异丙酯,继而与亚磷酸三乙酯反应得到了Wittig-Homer试剂,随后与香茅醛发生Wittig-Horner反应,最后在阳离子树脂催化作用下与甲醇醚化,成功地全合成了具有保幼激素活性的昆虫生长调节剂11-甲氧基-3,7,11-三甲基-2,4-十二碳二烯酸异丙酯.所得标题化合物的四种异构体中,具有较高生物活性的(2E,4E)-异构体的含量达66%.各步所合成化合物的结构经1H NMR,IR,MS分析确证.     

Towards a selective Boc deprotection on acid cleavable Wang resin

Deprotection of the Boc group of an amino acid attached to the Wang resin has been investigated. Several conditions, including bases, solvents and reaction time, were studied. Quantitative yield of Boc deprotection was achieved with less than 10% loss of resin loading with trimethylsilyltriflate. This reagent allows the replacement of tert-butyl to TMS group, leading to a new temporary urethane protection readily hydrolyzed.     

Fragmentation of peptides with N-terminal dimethylation and imine/methylol adduction at the tryptophan side-chain

The reaction between formaldehyde and the side-chain of tryptophan results in a methylol adduct. This methylol adduct formation also occurs during reductive methylation reactions. In the current study, we investigate the fragmentation pattern of peptides with N-terminal dimethylation and methylol adduction at the tryptophan side-chain. Once formed, the methylol group can easily undergo water loss to form an imine. The peptides with imine or methylol adduct on tryptophan exhibit similar MS/MS fragmentation patterns. We observed ions resulting from an intramolecular reaction between the dimethylamino group at the peptide N-terminus or the lysine side-chain and the imine group. This reaction reduces the imine to a methyl group. We also observed the loss of the imine adduct on tryptophan. This reaction is likely to occur through the reaction of an amino or hydroxyl group with the imine adduct followed by subsequent loss of methylenimine or formaldehyde.     

Pattern formation using polystyrene benzaldimine self-assembled monolayer by soft X-ray

A nanopatterning fabrication by soft X-ray generated chemical construction of a polystyrene benzaldehydeimine monolayer has been carried out from the polystyrenebezaldehyde resin with (3-aminopropyl) triethoxysilane for the first time. The molecular layer was exposed to soft X-rays; the involved chemical modification on the monolayer was analyzed by using Fourier transform infrared spectroscopy-attenuated total internal reflectance and contact angle measurement. As a result, we could confirm that the imine monolayer was cleaved upon the soft X-ray irradiation, leaving the hydrophobic part, the imine functionality was changed into a new nonhydrolysable, and the hydrophilic amine functionality was established from the unexposed imine monolayer through acid hydrolysis. This above phenomenon is used for the patterning of self-assembled monolayers. The microscope images revealed patterns as small as ≤52.4 nm with regular height and phase variations.     

Synthesis of julolidines via one-pot cascade three component Povarov reaction in the presence of silica sulfuric acid

In this report, synthesis of julolidines via one-pot cascade reaction of aniline derivatives with a mixture of styrene and formaldehyde in the presence of silica sulfuric acid as an efficient catalyst has been studied under aerobic condition. By presented method, various julolidines are obtained under mild and transition metal-free conditions. The reaction is proceeded with imine formation and followed by an Aza-Diels-Alder cycloaddition with styrene gave julolidine derivatives. The catalyst can be recycled and reused multiple times to catalyze the reaction.     

Titanium-mediated reductive cross-coupling reactions of imines with nitriles: an efficient route for the synthesis of α-aminoketones or 1,2-diketones

The reaction of imines with low-valent titanium species, generated in situ by using Ti(OⁱPr)₄/2 c-C₅H₉MgCl reagent, affords titanium–imine complex, which can couple with nitriles to provide 2,5-diazatitanacyclopentenes. α-Aminoketones are obtained in good yields by quenching the corresponding 2,5-diazatitanacyclopentenes with aqueous HCl solution. However, when the reaction is first quenched with MeOH in air followed by addition of aqueous HCl solution, 1,2-diketones are formed in good to high yields.