The influence of different variables on the electrochemical behavior of mild steel in circulating cooling water containing aggressive anionic species

Cyclic voltammetric, potentiodynamic anodic polarization and current–time transient studies were carried out on mild steel in circulating cooling water containing Cl⁻ and SO₄⁻² ions under the effect of different variables such as coolant flow, the availability of oxygen, cooling system temperature, and cooling system pH. The anodic excursion span of mild steel in cooling corrosive solution was characterized by the occurrence of a well-defined anodic peak (A1), while the reverse sweep was characterized by the appearance of two cathodic peaks (C1 and C2). The presence of Cl⁻ and SO₄⁻² ions in cooling water enhance the active dissolution of mild steel and tend to breakdown the passive film and induce pitting attack. The data reveal that increasing flow rate and temperature of cooling solution enhances the anodic peak current density (j _A1) and shifts the pitting potential (E _pit) towards more active values. It is seen that the peak current density of the anodic peak A1 increases and the pitting potential (E _pit) displaced in the noble direction in the aerated solution compared that in de-aerated solution. The pitting corrosion of mild steel by Cl⁻ and SO₄⁻² ions initiates more readily in acidic medium (pH 2.0). It was found that the incubation time (t _i) increase and in turn the pitting corrosion decrease in the order: pH 10 > pH 6.8 > pH 2.0.     

The inhibition mechanism of pitting corrosion of pure aluminum by nitrate and sulfate ions in neutral chloride solution

The inhibition mechanism of pitting corrosion of natural oxide film-covered pure aluminum by NO⁻ ₃ and SO²⁻ ₄ ions has been examined in 0.1 M NaCl solution using potentiodynamic polarization experiments, a.c. impedance spectroscopy, Auger electron spectroscopy and a combination of the potentiostatic current transient method and optical microscopy. It was found that NO⁻ ₃ ions can be incorporated into the natural oxide film on pure aluminum at open-circuit potential, but the incorporation of SO²⁻ ₄ ions into the film hardly occurs. The incorporation of NO⁻ ₃ ions lowered the pitting susceptibility of pure aluminum in 0.1 M NaCl solution. Based upon the experimental results, it is suggested that the pitting corrosion inhibition mechanism by anions can be classified into two different groups: inhibition by competitive adsorption of anions (SO²⁻ ₄) with Cl⁻ ions and inhibition by the incorporation of anions (NO⁻ ₃) into the film rather than competitive adsorption. Both cases may impede the incorporation of Cl⁻ ions into the film, thus inhibiting pitting corrosion of natural oxide film-covered pure aluminum in chloride solutions. Received: 16 October 1998 / Accepted: 6 January 1999     

Electrochemical behaviour of a lead electrode in phosphoric acid

 A lead electrode was studied in 6 and 12 M H₃PO₄. Oxidation of a freshly polished electrode occurred in the −0.5 to −0.3 V vs. SCE range, and led to PbHPO₄ growth on the electrode surface. The dissolution of this layer by electrochemical reduction occurred between −0.5 and −0.7 V. The influence of temperature (20 °C and 65 °C) was investigated and showed that the anodic and the cathodic peaks were increasing, and more markedly for the 12 M H₃PO₄. The ratio Q _cathodic/Q _anodic (Q=electrical charge flowing through the electrode) was equal or close to the unity at 20 °C and decreased as the temperature was increased. The influence of Cl⁻, Br⁻ and I⁻ ions was also evaluated. The addition of Cl⁻ and Br⁻ predominantly led to Pb₅(PO₄)₃Cl and Pb₅(PO₄)₃Br, respectively, while I⁻ led to a mixture of PbI₂ and PbHPO₄. Received: 18 July 1999 / Accepted: 2 November 1999     

Thermal expansion and heat capacity measurements on Ba10?xCsx(PO4)6Cl2?δ, (x?=?0, 0.5) chloroapatites synthesized by sonochemical process

Ba_10−x Cs _x (PO₄)₆Cl₂, (x = 0, 0.5) chloroapatite ceramics were prepared by sonochemical method of synthesis. The measured room temperature lattice parameters of Ba₁₀ (PO₄)₆Cl₂ and Ba_9.5Cs_0.5 (PO₄)₆Cl_2−δ are practically the same; that is, a = 10.26 (8), c = 7.65 (7) and a = 10.27 (7), c = 7.65 (5), respectively. Heat capacity measurements were carried out on these materials by differential scanning calorimetry (DSC) in the temperature range 298–800 K. The heat capacity values of Ba_9.5Cs_0.5(PO₄)₆Cl_2−δ are found to be slightly higher at all temperatures than those of Ba₁₀(PO₄)₆Cl₂. From the heat capacity data, other thermodynamic functions such as enthalpy and entropy increments were computed. The heat capacity values of Ba₁₀(PO₄)₆Cl₂ and Ba_9.5Cs_0.5(PO₄)₆Cl_2−δ at 298 K are 0.3912 and 0.4310 J K⁻¹ g⁻¹, respectively. Thermal expansion property of the doped and undoped barium chloroapatites was measured by using a home built dilatometer which uses LVDT as displacement sensor. The bulk thermal expansion of Ba₁₀(PO₄)Cl₂ and Ba_9.5Cs_0.5(PO₄)Cl_2−δ is observed to be about 0.9% in the temperature range of 298–973 K.     

Liquid-phase isobutane alkylation with butenes over aluminum chloride complexes synthesized in situ from activated aluminum and <Emphasis Type="Italic">tert</Emphasis>-butyl chloride

The liquid-phase interaction between isobutane and butenes at 303 K and 2.5–3.0 MPa has been investigated using activated aluminum (Al*)-tert-butyl chloride (TBC) model system (TBC: Al* = 0.35−4 mol/mol). It has been demonstrated by attenuated total reflection FT-IR (ATR-FT-IR) spectroscopy that the catalytically active aluminum chloride complexes forming in situ in the hydrocarbon medium vary in composition. Alkylation as such takes place at equimolar proportions of the reactants (TBC: Al* = 1: 1) and butenes feed 1mass flow rate of 5 h⁻¹ per gram of Al*. According to ATR-FT-IR data, the most abundant aluminum complexes resulting under these conditions are the AlCl₄⁻ and Al₂Cl₇⁻ ions and, probably, the molecular complex AlCl₃ · sec-C₄H₉Cl. In a fourfold excess of TBC over Al* at butenes mass feed rate of 2.5 h⁻¹, isobutane undergoes self-alkylation. In this case, the Al₂Cl₇⁻ ion is not detected and the most abundant complexes are AlCl₄⁻, Al₃Cl₁₀⁻ and the molecular species AlCl₃ · tert-C₄H₉Cl. It is hypothesized that the Al₂Cl₇⁻ ion plays the key role in the liquid-phase alkylation of isobutane with butenes.     

Efficient fluoride-selective receptor: experiment and theory

A novel artificial receptor, (3′-nitrobenzo)[2,3-d]-(3′′-nitrobenzo)[9,10-d]-1,4,8,11-tetraazacyclotetradecane-5,7,12,14-tetraone, has been synthesized and shows high selective and recognitive ability for F^- among F⁻, Cl⁻, Br⁻, AcO⁻, H₂PO₄⁻ by UV-vis and ¹H NMR titration experiments. Theoretical investigations suggest that the fluoride selectivity among various anions comes from the fact that the fluoride approaches much closer to the amide protons than other anions located above the cavity. The interaction energies support the large binding ability difference between F⁻ and Cl⁻/Br⁻/AcO⁻/H₂PO₄⁻.     

Molecular dynamics calculation of spectral characteristics of water clusters in the presence of ozone molecules and chlorine ions

Simultaneous interaction of the (H₂O)₅₀ cluster with O₃ molecules and Cl⁻ ions was studied by the molecular dynamics method. Six O₃ molecules located near the cluster were absorbed by the aqueous aggregate, and Cl⁻ ions in turn left the zone of the interaction with the cluster. Some of Cl⁻ ions penetrated inside the formed (O₃)₆(H₂O)₅₀ cluster and come into collision with O₃ molecules that split the ozone molecule into atoms. When Cl⁻ ions were removed sufficiently far away from the cluster, the water cluster with absorbed O₃ molecules and O atoms was observed for 15.6 ps. The interaction of water molecules with Cl⁻ ions gives rise to an increase in the integral intensity of absorption and emission IR spectra, and also to an essential decrease in the analogous characteristics of the Raman spectrum in the frequency range of 0 ≤ ω ≤ 1000 cm⁻¹. The presence of Cl⁻ ions did not affect essentially the location of the main band in the IR spectra, but considerably changed the shape of the bands in the Raman spectrum.     

Spectral characteristics of water clusters upon interaction with oxygen molecules and chlorine ions

The interactions of a 6O₂ + (H₂O)₅₀ system with two, four, or six Cl⁻ ions are studied by the molecular dynamics method. The integral intensity of IR and Raman spectra decreases with an increase in the number of Cl⁻ ions surrounding the system. The values of real and imaginary parts of dielectric permittivity increase with the rise in the frequency reaching maxima in the 850 ≤ ω ≤ 950 cm⁻¹. As a result of interactions between ions and the formed (O₂)₆ (H₂O)₅₀ cluster, the pattern of the reflection spectrum of IR radiation becomes smoother. The interaction between 6O₂ + (H₂O)₅₀ system and Cl⁻ ions leads to the substantial increase in the power of emitted radiation. With time, Cl⁻ ions gradually leave the interaction zone with the system. Maximum residence time of the last ion near the system boundary does not exceed 3 ps. Cl⁻ ions located closer to O₂ molecules do not penetrate into the depth of an (O₂)₆ (H₂O)₅₀ cluster.     

Synthesis and anion recognition of neutral receptors based on multiamide calix[4]arene

Two multiamide calix[4]arenes (5, 6) were synthesized and characterized by NMR, MS and elemental analysis. The binding properties of receptors with some anions (π-O₂NPhOPO₃²⁻, π-O₂NPhO⁻, H₂PO₄⁻, Ac⁻, Cl⁻, Br⁻ and I⁻) were studied by UV-Vis spectra. The results indicate that the tetraamide calix[4]arenes (5, 6) have a good selectivity to the anions containing aromatic ring (π-O₂NPhOPO₃ ²⁻, π-O₂NPhO⁻). The 1 : 1 complexes between host and guest were formed through multiple hydrogen bonding and π-π interactions. The hosts 5 and 6 also show a definite binding ability for the anions (H₂PO₄⁻, Ac⁻, Cl⁻) that have no ultraviolet absorption, which provides a simple method of spectrum detection for these anions.     

Specific adsorption of anions in the course of underpotential and bulk depositions and alloy formation of cadmium on a smooth gold support in acid medium

 The specific adsorption of ³⁶Cl-labelled Cl⁻ ions and ³⁵S-labelled HSO₄ ⁻ ions was studied in 1 mol dm⁻³ HClO₄ supporting electrolyte in the presence of Cd²⁺ ions at a gold support over a wide potential range corresponding to electrodeposition, alloy formation, underpotential deposition of Cd species and existence of an adatom-free surface. The distinct sections in the potential dependence of the adsorption of anions together with the potential versus time curves obtained under open circuit conditions reflect the changes in the state of the electrode surface, the dissolution of the bulk Cd phase and the slow elimination of Cd species from the Cd/Au alloy. Received: 16 March 1999 / Accepted: 5 May 1999     

The electrochemical behaviour of polycrystalline silver electrodes in Na2CO3 solution and the effect of ClO− 4 ions

The electrochemical behaviour of polycrystalline silver electrodes in Na₂CO₃ solutions was studied under potentiodynamic and potentiostatic conditions and complemented with X-ray diffraction analysis. Potentiodynamic E/i anodic curves exhibit active passive transition prior to an oxygen evolution reaction. The active region involves a small peak AI followed by a major peak AII before the passive region. Peak AI is assigned to the formation of an Ag₂O layer while peak AII is due to the formation of an Ag₂CO₃ layer. The height of the anodic peaks increases with increasing Na₂CO₃ concentration, scan rate and temperature. The effect of increasing additions of NaClO₄ on the electrochemical behaviour of Ag in Na₂CO₃ solutions was investigated. The perchlorate ions stimulate the active dissolution of Ag, presumably as a result of the formation of soluble AgClO₄ salt. In the passive region, ClO⁻ ₄ ions tend to break down the dual passive film, leading to pitting corrosion at a certain critical pitting potential. The pitting potential decreases with ClO⁻ ₄ concentration. Potentiostatic current/time transients showed that the formation of Ag₂O and Ag₂CO₃ layers involves a nucleation and growth mechanism under diffusion control. However, in the presence of ClO⁻ ₄ ions, the incubation time for pit initiation decreases on increasing the anodic potential step. Received: 3 July 1998 / Accepted: 10 March 1999     

DDTC-Na-based colorimetric chemosensor for the sensing of cyanide in water

Sodium diethyldithiocarbamate (DDTC-Na) was demonstrated to be a new colorimetric cyanide chemosensor by utilizing an indirect trick. First, some copper ions were added to the colorless aqueous solution of DDTC-Na. Then, the resultant brown solution was studied upon the addition of different anions, including Cl⁻, I⁻, IO₃⁻, SO₄²⁻, NO₂⁻, Br⁻, H₂PO₄⁻, F⁻, SCN⁻, HSO₄⁻, ClO₄⁻ and CN⁻. It was observed by naked eyes that the brown solution changed to colorless immediately after the addition of the trace cyanide, but there were no changes towards other anions, making DDTC-Na a good selective cyanide chemosensor in pure water. Supported by the National Natural Science Foundation of China (Grant Nos. 20674059 & 20402011)     

A study of ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion exchange resin Indion-830 (Type 1)

A study of the thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻ and uni-divalent Cl⁻/SO ₄ ²⁻ , Cl⁻/C₂O ₄ ²⁻ reaction systems was carried out using ion exchange resin Indion-830 (Type 1). The equilibrium constant K was calculated by taking into account the activity coefficients of ions both in solution and in the resin phase. For uni-univalent ion exchange reaction systems, the equilibrium constants K′ were also calculated from the mole fraction of ions in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems increased as the temperature grew, indicating the endothermic character of the exchange reactions with enthalpies of 38.2, 32.3, 7.6, and 11.4 kJ/mol, respectively. The article is published in the original.     

Study on ion exchange equilibrium for some uni-univalent and uni-divalent reaction systems using strongly basic anion-exchange resin Duolite A-113

The study on thermodynamics of ion exchange equilibrium for uni-univalent Cl⁻/I⁻, Cl⁻/Br⁻, and uni-divalent Cl⁻/SO₄²⁻, Cl⁻/C₂O₄²⁻ reaction systems was carried out using ion-exchange resin Duolite A-113. The equilibrium constant K was calculated by taking into account the activity coefficient of ions both in solution as well as in the resin phase. The K values calculated for uni-univalent and uni-divalent anion exchange reaction systems were observed to increase with rise in temperature, indicating the endothermic exchange reactions having enthalpy values of 17.21, 36.60, 19.50, 18.43 kJ/mol respectively.     

Some applications of positron annihilation lifetime spectroscopy to complex formation and ion association studies

The rate constants for the reactions of positronium with halogen molecules and with halide ions in methanol (I₂, Br₂, Cl⁻, Br⁻) and in dimethylsulphoxide (I₂, Cl⁻) have been measured. The variations of the ortho-positronium lifetime in mixtures of these solutes have been used for quantitative determination of the formation constants of the corresponding polyhalides. These were found to be 2.9 and 5.4 M⁻¹, respectively, for I₂Cl⁻ and I₂Br⁻ in methanol and 2.0 M⁻¹ for I₂Cl⁻ in dimethylsulphoxide. Experiments on acidified AgClO₄ solutions confirmed the formation, at molar concentrations, of the Ag₂ ClO ₄ ⁺ species, very probably a triplet ion association.     

Determination of inorganic anions in mushrooms by ion chromatography with potentiometric detection

A simple method for determination of common inorganic anions in mushroom samples has been developed by using suppressed ion chromatography with a pH detection unit. The detection unit which was constructed in such a way that practically no additional dispersion occurred consisted of a flow-through quinhydrone pH sensor and a small reference electrode. Chromatographic separation was performed in the order F⁻, Cl⁻, NO₂⁻, Br⁻, PO₄³⁻, ClO₃⁻, NO₃⁻, and SO₄²⁻, at room temperature by using Ion Pac AS 9-HC anion exchange column. Anion extracts from dried mushroom samples at room temperature were homogenized and filtered before injection. Under optimized analytical conditions, the detection limits of the method were between 2 × 10⁻⁶ and 3 × 10⁻⁴ M, depending on the anion studied. The results showed that the concentrations of fluoride and bromide in all mushroom samples were below their limit of detection. Nitrite was found to be the lowest abundant ion, while the most abundant ion was sulfate in all the mushroom samples studied.     

Negative ion mode electrospray ionization mass spectrometry study of ammonium-counter ion clusters

Electrospray ionization mass spectrometry (ESI-MS) was used to examine clusters of protonated amine salt solutions with chloride counter ions in the negative ion mode. These ions have the general formula [(RNH₃)_xCl_x+1]⁻. Primary amines generate a wide cluster distribution with clusters up to 14 mer for methylamine hydrochloride clusters. Secondary and quaternary amines only generate the monomer ion under identical conditions. Collision induced dissociation (CID) of the cluster ions generates cluster ions of lower m/z with the next lower cluster being the most abundant. The product ions from MeNH₃Cl₂⁻, Me₂NH₂Cl₂⁻ and (MeNH₃)₂Cl₃⁻ have low threshold appearance energies of 1. 24 to 2. 22 eV center-of-mass frame. Secondary amine monomer ions have lower threshold CID energies than primary amine monomer ions. The amine threshold CID energy decreases as the carbon chain length increases. As an electrospray solvent, isopropyl alcohol (IPA) promotes the formation of counter ions and clustering.     

Fabrication of TiO2/Ti nanotube electrode and the photoelectrochemical behaviors in NaCl solutions

Titanium oxide nanotube electrodes were successfully prepared by anodic oxidation on pure Ti sheets in 0.5 wt.% NH₄F + 1 wt.% (NH₄)₂SO₄ + 90 wt.% glycerol mixed solutions. Nanotubes with diameter 40–60 nm and length 7.4 μm were observed by field emission scanning electron microscope. The electrochemical and photoelectrochemical characteristics of TiO₂ nanotube electrode were investigated using linear polarization and electrochemical impedance spectroscopy techniques. The open-circuit potential dropped markedly under irradiation and with the increase of Cl⁻ concentrations. A saturated photocurrent of approximately 1.3 mA cm⁻² was observed under 10-W low-mercury lamp irradiation in 0.1 M NaCl solution, which was much higher than film electrode. Meanwhile, the highest photocurrent in NaCl solution implied that the photogenerated holes preferred to combine with Cl⁻. Thus, a significant synergetic effect on active chlorine production was observed in photoelectrocatalytic processes. Furthermore, the generation efficiency for active chlorine was about two times that using TiO₂/Ti film electrode by sol–gel method. Finally, the effects of initial pH and Cl⁻ concentration were also discussed.     

Hg (II) extraction in a PEG-based aqueous two-phase system in the presence of halide ions. I. Liquid phase analysis

The partition behaviour of Hg (II) was studied in an aqueous polyethylene glycol (PEG) — (NH₄)₂SO₄ two-phase system as a function of halide, halide concentration, and pH. For a system prepared by mixing equal volumes of 40 % (w/w) PEG (1550) with 40 % (w/w) (NH₄)₂SO₄, Hg(II) remains almost exclusively in the salt-rich phase. The addition of NaX (X = Cl⁻, Br⁻, I⁻) enhances Hg (II) partition into the PEG-rich phase due to the formation of halide complexes. The efficiency of halide extractants increases in the order: Cl⁻ < Br⁻ < I⁻. Mercury extraction is improved at lower halide ion concentration by higher stock salt solution acidity. From the distribution coefficients determined as a function of halide ion concentration, the extracted species were identified. The Hg (II) extractability is determined by the type and stability of the Hg (II) halide species, and depends on the stock salt solution acidity. The observed behaviour is discussed and a possible extraction mechanism is proposed.     

The impedance of liquid (Ga-In)-electrode of eutectic composition in aqueous electrolyte solutions in the absence and in the presence of surface-active ions

Adsorption behavior of anions at liquid (Ga-In)-electrode at a temperature of 305 K is studied by electrochemical impedance spectroscopy and cyclic voltammetry. The above-listed methods allowed evaluating the adsorbability of different ions. Equivalent circuit describing the experimental data in the presence and in the absence of ions Br⁻ and Cl⁻ is a contour comprising a resistance connected in series to a capacitance whose value remains constant over the frequency range from ∼300 Hz to 10 kHz. Analysis of the experimental data obtained by the mixed electrolyte method with excess of surface-inactive ion Cl and constant ionic strength 0.1 M in electrolyte solutions acidified down to pH 3 gave the charge of specifically adsorbed ions Br⁻ and Cl⁻ (σ₁) at the liquid (Ga-In)-electrode surface as 5.24 and 1.67 μC/cm², respectively, at the adsorbate maximal concentration and zero-charge potential. These values are characteristic of very weak specific adsorption. The σ₁ values found for the (Ga-In)-electrode were used in the calculations of different isotherms, aiming at the determination of adsorption parameters. The results of the study were compared with literature data obtained by different researchers for different metals in the presence of specifically adsorbing bromide and chloride ions.