A new calix[4]arene based nucleobase for cation recognition

A novel calix[4]arene linked nucleobase molecular receptor bearing two adenine moieties has been synthesized and characterized by UV, IR, NMR and ESI–MS analyses. The synthesized receptor can recognize biologically important Zn²⁺ and Mn²⁺ ions through 1:1 binding stoichiometry. The evaluation of binding constants suggests that adenine alone, in an appropriate supramolecular network, can exhibit efficient binding for Zn²⁺ ions without the presence of any phosphate or sugar unit.     

Nanoencapsulation of calix[4]arene inclusion complexes

A hexameric resorcinarene nanocapsule in wet CDCl3 forms inclusion complexes of calix[4]arene with tetramethylammonium and trimethylsulfoxonium cations to give highly stable Russian-doll-type multicomponent assemblies. The 2D NOESY experiments revealed the size of the assembly, the close proximity of the encapsulated calix[4]arene molecule to the resorcinarene molecules of the capsule, and the inclusion of the tetramethylammonium cation in the calix[4]arene cavity.     

Luminescent lanthanoid complexes of a tetrazole-functionalised calix[4]arene

p-t-Butylcalix[4]arene functionalised at the lower rim with two tetrazole moieties is found to be a useful receptor for lanthanoid cations. The luminescence of the resulting complexes can be controlled by addition of base, with emission achieved in the visible and infrared regions.     

Metallic macrocycle with a 1,3-alternate calix[4]arene phosphorus ligand

The preparation of an 1,3-alternate calix[4]arene phosphorus ligand, 25,27-bis(2-(diphenylphosphino)ethoxy)-26,28-bis(1-propyloxy)calix[4]arene (3), is presented. Ligand 3 is obtained in three steps in 64% overall yield. Reaction of 3 with [Rh(cot)2]BF4 produced the encapsulated rhodium complex [Rh[(P,P)-diphen-calix[4]arene]]BF4 (4). As revealed by a single-crystal X-ray diffraction study, the rhodium center has a bent coordination environment with a P-Rh-P angle of 135.66(3) degrees. Palladation of 3 employing [Pd(MeCN)4](BF4)2 yielded the chelate palladium complex 7 in which the palladium center has a slightly bent configuration. Treatment of the ligand with Pd(cod)Cl2 and [Pd(eta3-C4H7)(THF)2]BF4 leads to the isolation of the monometallic complex. Full characterization includes X-ray structural studies of compounds 3, 4, and 6.     

Metallic macrocycle with a 1,3-alternate calix[4]arene salicylideneamine ligand

The calix[4]arene-based podand which incorporates two salicylideneamine units in 1,3-alternate positions of the lower rim has been prepared and subjected to complexation studies with transition metal ions. The nickel and copper complexes form a 2 : 2 stoichiometric metallic macrocyclic framework.     

Calcium-selective electrode based on a calix[4]arene tetraphosphine oxide

A new ligand capable of producing calcium-selective electrodes with excellent characteristics is presented. The ligand (1) is a calix[4]arene bearing phosphine oxide ligating groups on the lower rim and this is the first report that such ligands can discriminate in favour of calcium ions against magnesium ions and the alkali metal ions. This calcium selectivity is in complete contrast to the behaviour of the well-known calix[4]arene tetraester derivatives (such as 2) which are selective for sodium against other alkali metal ions and group II ions. Electrodes based on PVC membranes incorporating ligand 1 display almost nernstian slopes and excellent selectivity against common interferants, including magnesium (log K(Ca,Mg)(pot)). The electrodes have demonstrated effective lifetimes of at least 7 weeks (duration of the study) and very fast response times.     

Two triethylammonium ion complexes of monoanionic calix[4]arene

Two complexes between mono‐deprotonated calix­[4]­arene and Et₃HN⁺ are reported. The first, triethylammonium 26,27,28‐tri­hydroxy­penta­cyclo­[19.3.1.1^3,7.1^9,13.1^15,19]­octacosa‐1(25),3,5,7(28),9,11,13(27),15,17,19(26),21,23‐dodecaen‐25‐olate, C₆H₁₆N⁺·C₂₈H₂₃O₄^?, comprises only the cationic and anionic species, whereas the second, tris­(triethyl­ammonium) tris[26,27,28‐tri­hydroxy­penta­cyclo­[19.3.1.1^3,7.1^9,13.1^15,19]­octacosa‐1(25),3,5,7(28),9,11,13(27),15,17,19(26),21,23‐dodecaen‐25‐olate] aceto­nitrile solvate, 3C₆H₁₆N⁺·3C₂₈H₂₃O₄^?·C₂H₃N, comprises one aceto­nitrile solvent mol­ecule for three such units. In both cases, the units are stacked in columns so that the ammonium cation is hydrogen bonded to a phenolic or phenolate O atom of one mol­ecule and included in the hydro­phobic cavity of another neighbouring calixarene. The short contacts present indicate that cation?π and C—H?π interactions are likely to be involved in the inclusion phenomena.     

Novel tungsten calix[8]arene complexes

p-tert-Butylcalix[8]areneH8 reacts with WCl6 forming a number of new metallocalix[8]arenes, one of which is reduced to give the first example of a metal-metal triple bond supported by a large calixarene ligand; the degree of metallation and conformations adopted by the newly generated metallocalix[8]arene systems are determined by single crystal X-ray diffraction.     

Liquid crystals based on calix[4]arene Schiff bases

New liquid crystals based on calix[4]arene Schiff base were prepared by the reaction of tetraamino-calix[4]arene with aldehydes (4-hydroxy benzaldehyde, 2-vanillin, 4-vanillin and 2-hydroxy naphthaldehyde). Dielectric investigations on a magnetically oriented sample forming N, SmA, and SmC phases were carried out. The dielectric constant (ε’ and ε”) and dielectric loss (tan δ) have been determined as a function of frequency (20 Hz–2 MHz). The synthesized derivatives were purified and characterized by FT-IR, ¹H-NMR, ¹³C-NMR and MALDI-TOF MS. All the synthesized compounds were investigated for liquid crystalline properties using DSC (Differential Scanning Calorimetry), DTA (Differential Thermal Analysis) and POM (Polarizing Optical Microscopy) attached with a hot stage. They generally exhibited nematic and typical fanlike or mosaic texture, which suggest the ordered smectic mesophases. Compounds were found to adopt a specific molecular structure due to the rigid bowl like calix[4]arene core, i.e., a cone-like structure with mesogenic units aligned within the molecule.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

A chloride selective sensor based on a calix[4]arene possessing a urea moiety

New calix[4]arene derivative 1 of 1,3-alternate conformation with a ureido moiety has been synthesized in high yield and examined for its anion recognition abilities towards anions such as fluoride, chloride, bromide, iodide, nitrate and acetate by ¹H NMR and UV-vis spectroscopy. The results show that receptor has strong binding affinity for chloride ions. A chloride ion selective electrode (ISE) was also formed which showed excellent selectivity over all the other anions tested. The limit of detection is 2.51 × 10⁻⁵ mol dm⁻³.     

Polymeric membrane sodium-selective electrodes based on calix[4]arene ionophores

Six kinds of tetra alkylester type calix[4]arene derivatives, (R₁=R₂=CH₃1, C₂H₅2, C₃H₇3,n-C₄H₉4,t-C₄H₉5,n-C₁₀H₂₁6), a diethyl-didecyl mixed ester type (R₁=C₂H₅, R₂ =C₁₀H₂₁7), and three kinds of lower rim bridged types (R₁=C₂H₅, R₂–R₂=(CH₂)₁₀8, (CH₂)₁₂9, (CH₂)₂(OCH₂CH₂)₃10) were characterized by electrochemical measurement to elucidate the effect of the length of the alkyl group of alkoxycarbonyl substituents on Na⁺ selectivity. To obtain excellent Na⁺ selective ionophores, introduction of short chain alkyl groups rather than long chain ones, such as a decyl group, and maintenance of sufficient solubility of the calix[4]arene derivatives in the membrane solvent are required concurrently. Among the calix[4]arenes tested, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-tert-butylcalix[4]arene2, and the diethyl-didecyl mixed ester type derivative7 are the best ionophores for a Na⁺ selective electrode. On the other hand, sodium selectivity of the bridged type derivative9 is comparable or even superior to that of the known bis(12-crown-4).This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

New organized systems based on amphiphilic oxyethylated calix[4]arene

The aggregation of amphiphilic oxyethylated calix[4]arene is studied in the absence and presence of polyethyleneimine. At low calixarene concentrations, large ensembles with a hydrodynamic diameter of about 100 nm are formed and coexist with small (smaller than 10 nm) aggregates, which are observed in the entire concentration range. It is established that calixarene-based systems catalyze the neutral hydrolysis of bis(chloromethyl)phosphinic acid p-nitrophenyl ester, with the catalytic effect being as high as two orders of magnitude in the presence of La(III) ions. The rate of hydrolysis of phosphonates depends on the composition of the supramolecular system. The maximum acceleration exceeds three orders of magnitude in comparison with alkaline hydrolysis of the substrates.     

Study on thermal decomposition of calix[6]arene and calix[8]arene

Thermal decomposition kinetics of calix[6]arene (C6) and calix[8]arene (C8) were studied by Thermogravimetry analysis (TG) and Differential thermal analysis (DTA). TG was done under static air atmosphere with dynamic heating rates of 1.0, 2.5, 5.0, and 10.0 K min⁻¹. Model-free methods such as Friedman and Ozawa–Flynn–Wall were used to evaluate the kinetic parameters such as activation energy (E _a) and pre-exponential factors (ln A). Model-fitting method such as linear regression was used for the evaluation of optimum kinetic triplets. The kinetic parameters obtained are comparable with both the model-free and model-fitting methods. Within the tested models, the thermal decomposition of C6 and C8 are best described by a three dimensional Jander’s type diffusion. The antioxidant efficiency of C6 and C8 was tested for the decomposition of polypropylene (PP).     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Fullerene sensors based on calix[5]arene

A new class of fullerene sensors based on calix[5]arenes has produced the highly sensitive detection of C60 and C70.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.     

Thermodynamics of sublimation of calix[4]arene complexes with solvent molecules

The inclusion of small neutral organic guests (C₆H₁₄, CH₂Cl₂, CH₃OH) by calix[4]arene receptors was found by ¹H NMR spectroscopy and microanalysis. The studied calix[4]arenes can form stable intramolecular complexes with solvent molecules which keep the stoichiometric composition without changing under conditions of the sublimation experiment. The saturated vapour pressures of calix[4]arenes and complexes of calix[4]arenes with solvent molecules were determinated for the first time by the Knudsen’s effusion method in the wide temperature range. The changing of standard thermodynamic parameters of complexation by transfer process from condensed state to vapour phase was estimated. It was shown that the large flexibility of the calixarene ligand structure corresponds to a strongly negative entropic contribution as well as negative enthalpy term to the Gibbs energy of formation of host–guest complexes in the gas phase.