Porphyrin gels reinforced by sol-gel reaction via the organogel phase

Porphyrins bearing four urea-linked dodecyl groups (3a) or four urea-linked triethoxysilylpropyl groups (3TEOS) at their peripheral positions were synthesized. 3a tends to assemble into a sheetlike two-dimensional structure due to the predominant hydrogen-bonding interaction among the urea groups and acts as a moderate gelator of organic solvents. On the other hand, its Cu(II) compelx (3a.Cu) tends to assemble into a fibrous one-dimensional structure due to the predominant porphyrin-porphyrin pi-pi stacking interaction and acts as an excellent gelator of many organic solvents. 3TEOS and 3TEOS.Cu, which also act as gelators, afforded similar superstructures as those of 3a and 3a.Cu, respectively, and as evidenced by SEM and TEM observations and XRD measurements, the original superstructures could be precisely immobilized by in situ sol-gel polycondensation of the triethoxysilyl groups. The TEM images of 3a gels and 3TEOS gels after sol-gel polycondensation showed a fine striped structure, the periodical distance of which was either 2 or 4 nm. X-ray crystallographic analysis of a single crystal obtained from a reference porphyrin bearing four urea-linked butyl groups revealed that there are two different porphyrin-stacked columns in the crystal and both the 2 nm distance and the 4 nm distance can appear, depending on the observation tilting angle. The hybrid gel prepared from 3TEOS.Cu by sol-gel polycondensation showed unique physicochemical properties such as a high sol-gel phase-transition temperature (>160 degrees C), sufficient elasticity, high mechanical strength, etc. Thus, the present study has established new concepts for molecular design of porphyrin-based gelators on the basis of cooperative and/or competitive actions of hydrogen-bonding and pi-pi stacking interactions and for immobilization of their superstructures leading to development of new functional organic/inorganic hybrid materials.     

Porphyrin-based organogels: control of the aggregation mode by a pyridine-carboxylic acid interaction

To find a new strategy for designing porphyrin-based organogelators, hydrogen-bond-donating (carboxylic acid)/accepting (pyridine) substituents or electron-donating (dialkylamino)/withdrawing (pyridine) substituents were introduced into peripheral positions of a porphyrin (1cp or 1ep, respectively), and the gelation properties were compared with those of symmetrical reference compounds bearing two pyridyl substituents or two ester groups (1pp or 1ee, respectively). It was found that the symmetrical molecules show a solubility that is quite inferior to that of 1cp and 1ep having a dipole moment and precipitate from most organic solvents. 1cp, 1ep, and 1ee formed gels with cyclohexane, methylcyclohexane, and several alcoholic solvents, but scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations revealed that their superstructures constructed in the organogels are very different. In cyclohexane, 1cp resulted in a sheetlike structure, whereas 1ep and 1ee resulted in a fiberlike structure. The difference is attributed to the two-dimensional interactive forces in 1cp consisting of the porphyrin-porphyrin pi-pi stacking and the carboxylic acid-pyridine hydrogen bonding. In fact, when the hydrogen-bonding interaction was weakened by alcoholic solvents or by adding pyridine or N,N-(dimethylamino)pyridine, the sheetlike structure was transfigured to the fiberlike structure. Further detailed analyses of their aggregation modes were conducted by spectroscopic methods such as ultraviolet-visible (UV-vis) absorption, Fourier transform infrared (FT-IR), and X-ray diffraction (XRD). On the basis of these findings, the influence of these peripheral substituents on the gel formation and the aggregation mode was discussed.     

Supramolecular polymerization and polymorphs of oligo(p-phenylene vinylene)-functionalized bis- and monoureas

Bis- and monoureas hybridized with the oligo(p-phenylene vinylene) (OPV) pi-electronic segment and 3,4,5-tridodecyloxyphenyl wedge were synthesized and their supramolecular polymerization in diluted solution, gel formation in concentrated solution, and liquid crystallinity in bulk state were investigated. Bisurea 1a featuring a hexamethylene linker showed the highest supramolecular polymerization ability and formed tapelike nanofibers that can gelate various organic solvents. On the other hand, bisurea 1b featuring a dodecamethylene linker and monourea 2 showed a lower degree of supramolecular polymerization, resulting in gel formations in a smaller variety of solvents. These results clearly reflect a high level of cooperativity between the two urea sites and the two OPV segments of 1a upon hydrogen-bonding and pi-pi stacking interactions, respectively. When the gels of 1a, 1b, and 2 were dried, all the compounds self-organized into multilamellar superstructures. Thermal treatment of these lamellae at high temperatures induces columnar liquid-crystalline mesophases as a result of microsegregation between the rigid OPV parts and the molten aliphatic wedges. These results demonstrate that the present molecular constituent is very useful for fabricating dye-based functional assemblies providing nanoscale pi-electronic fibers, and solvent-incorporated and bulk soft materials.     

Anion-responsive supramolecular gels

Supramolecular gels that change their state or structure in response to anion stimuli have been highlighted. Only a few examples exist of such supramolecular gels, the structures and properties of which can be controlled and modulated by interactions with anions. To form anion-responsive dimensionally-controlled organized structures, the constituent low-molecular-weight gelator molecules must act as anion receptors by possessing one or more of van der Waals interaction units (aliphatic chains), stacking pi planes, hydrogen-bonding sites, and metal-coordination units. This Concept focuses on the gelation and transition behaviors of amide- and urea-based anion-stimulated systems, metal-coordinated systems, and novel acyclic pi-conjugated oligopyrroles that act as "molecular flippers."     

New gelators of urea-containing triazine derivatives: effects of aggregation and optical features in different organic solvents

New gelators for urea-containing triazine derivatives were synthesised, and their gelation potential was examined using different organic solvents. These compounds were found to form the organogels with a variety of organic solvents, such as hexane and other solvents. The elongated alkyl tails of the gelators displayed an obvious decrease in the critical gelation concentrations of apolar solvents and an increase in the compatibility of gelation in polar solvents. The resulting thermo-reversible gels were characterised by using the dropping ball method and a number of other instruments. The melting temperature (Tm) of the gels in decalin and CCl₄ increased with the gelator concentrations. The intermolecular hydrogen bonding of gelation in different organic solvents was observed using an FT-IR spectrometer. Temperature-dependent UV–vis and fluorescence analysis showed that the organogels displayed diverse aggregations and various fluorescence effects in different organic solvents. Blue fluorescence and J-aggregation in decalin and the quenched effect and π–π stacking in CCl₄ were observed. Further, the morphological self-assembled feature in different organic solvents was studied with a scanning electron microscope, and the morphological features demonstrated that there were different aggregations in different solvents. In conductivity electrolyte experiments, the organogel electrolytes exhibited high conductivity (σ) compared with the corresponding tetrabutylammonium perchlorate (TBAP)/THF solution. The conductivity of the gel electrolytes increased with the concentration of the electrolyte salts and temperature. When the sol–gel temperature was achieved, a high ion conductivity was observed compared with the corresponding TBAP/THF solution. When the ratio of the added electrolyte salts exceeded 5%, gelation was inhibited. Furthermore, the effect of the electrolyte salts on the Tm of the gel was confirmed. The added electrolyte salts affected the gelation ability, but did not affect the sol–gel temperature.     

Role of nitrogen atom in aromatic stacking

Aromatic stacking of 9,9'-(alpha,omega-alkanediyl)bis[adenine] (1), 1,1'-(alpha,omega-alkanediyl)bis[benzimidazole] (2), and 9-[omega-(benzimidazol-1-yl)alkyl]adenine (3) were studied at low concentrations of these compounds by means of UV and NMR spectroscopies. The UV hypochromic effect at T degrees C was determined as the ratio of the integration strength B at T degrees C (T = 27, 40, and 50) to that at 60 degrees C. The UV hypochromic effects of 1 and 3 were remarkable in water, suggesting a formation of intramolecular aromatic stacking, while the UV data of 2 did not present unambiguous evidence supporting aromatic stacking. A difference of chemical shift of each aromatic ring proton between 27 and 80 degrees C, that is Deltadelta = delta(80 degrees C) - delta(27 degrees C), was given as an indication of the aromatic stacking in the NMR study. On the basis the data of Deltadelta, 1 and 3 were stabilized by a stacking interaction in the buffer solution at pD 7.0 but not in the organic solvents. On the other hand, the NMR data did not indicate the formation of aromatic stacking of 2 either in the organic solvents or in the aqueous solution. The thermodynamic parameters of the intramolecular aromatic stacking of 3 were determined by means of NMR spectroscopy.     

基于豆甾醇衍生物的超分子凝胶的合成与性能

设计合成出两种含有不同结构单元的新型豆甾醇衍生物凝胶因子（化合物1和2）。通过扫描电子显微镜（SEM）、傅里叶变换红外光谱（FT-IR）和紫外-可见光谱（UV-Vis）等技术手段对形成凝胶的结构和性能进行研究。结果表明,两种凝胶因子可分别在二甲基亚砜及甲醇溶剂中形成稳定的凝胶。其中化合物1还可在二甲基亚砜/水混合溶液体积比分别为9∶1、8∶2和7∶3中形成稳定的凝胶。当化合物1和2在DMSO溶剂中以质量浓度均为12 mg/mL形成凝胶时,二者的凝胶-溶胶相转变温度（T_gel）分别为51和46 ℃,表明随着凝胶因子中甾体结构单元的增加,其形成凝胶的热稳定性显著下降。在此基础上,以化合物1制备的凝胶为载体,通过紫外-可见光谱对罗丹明B、亚甲基蓝和阿霉素的包封与释放应用进行了研究。结果表明,制备的凝胶可以作为药物载体,并在240 min时在水中达到的最大释放值为84％。本文为豆甾醇衍生物凝胶的制备,及将其作为药物载体在药物输送领域的应用提供了有益的思路。     

Dual-component cholesterol-based gelators bearing complementary hydrogen-bonding sites

Cholesterol derivatives with an isocyanuric acid moiety 1 or a triaminopyrimidine moiety 2 were synthesized expecting a co-operative action between the hydrogen-bonding interaction and the cholesterol-cholesterol interaction to provide the reinforced aggregation property. Although 1 could gelatinize several organic solvents by itself, 2 always resulted in precipitates from these solvents. In contrast, a 1:1 1 + 2 mixture gave reinforced organic gels because of the action of their complementary hydrogen-bonding sites. IR spectroscopic studies showed, however, that the 1 + 2 gel does not employ a neat tape structure but a partially disordered, kinetically stable structure.     

A favorable, narrow, δ(h) Hansen-parameter domain for gelation of low-molecular-weight amino acid derivatives

In recent years, the design of new low-molecular-weight gelators (LMWGs) has attracted considerable attention because of the interesting supramolecular architectures as well as industrial applications. In this context, the role of the organic solvent in determining the organogelation behavior is a central question. Herein we report the results of a systematic study of the organogelation behavior of amino acid derivatives in a wide range of solvents to establish a relationship between the nature of the solvent and the formation of the gel. We highlight that the majority of the gelified solvents are aromatic, except for carbon tetrachloride and tetrachloroethylene. In addition, different parameters related to the nature of the solvent were considered and their influence on the physical properties of gelation was evaluated. The hydrogen-bonding Hansen parameter (δ(h)) allows us to draw a narrow favorable δ(h) domain for gelation in the range of 0.2-1.4 (cal cm(-3))(1/2). Furthermore, a general increase of the Hildebrand parameter (δ) leads to the formation of poor gels (small gelation numbers, GNs) in aromatic solvents. Scanning electron microscopy (SEM) revealed that the gels prepared from (l)-phenylalanine and (l)-leucine derivatives in different solvents are composed of an entangled 3D fibrillar network, the diameter of which is only slightly influenced by the nature of the solvent.     

Self-assembly of pyrazine-containing tetrachloroacenes

In this paper, we report self-assembly of tetrachloroacenes containing pyrazine moieties. The title compounds, phenazine and bisphenazine substituted with four chlorine atoms for increased electron deficiency and alkyloxy side groups for solubility, demonstrated excellent gelation ability in select organic solvents. The assembled structure of these two series of compounds exhibited a morphological difference. Tetrachlorophenazine containing hexadecyloxy side groups induced rigid microbelts, while more extensive entanglement of thinner, more flexible fibers was observed from tetrachlorobisphenazine compounds, characterized by scanning electron microscopy. Tetrachlorophenazine and tetrachlorobisphenazine gels showed quite different emission behavior compared to their solution state. A strong, red-shifted emission compared to that of its diluted solution state was observed from the gel of tetrachlorophenazine. We have ascertained this is a result of J-aggregate formation. From the crystal structure of a model compound, it was found that tetrachlorophenazine cores adopt π-π stacking with a short stacking distance of 3.38 ?, enabling significant intermolecular π-orbital overlap. In addition, the π-cores were displaced longitudinally, indicative of J-aggregate formation. Surprisingly, the gel of tetrachlorobisphenazine showed fluorescence comparable to that of its dilute solution, suggesting that such a close packing of the π-cores may not be possible due to the bulky tert-butyl substituents.     

Urea and thiourea derivatives as low molecular-mass organogelators

The properties of a series of organogels consisting of a urea or thiourea derivative with one or two n-alkyl substitutuents at the nitrogen atoms (a low molecular-mass organogelator (LMOG)) and an organic liquid are described. They include N,N'-dimethylurea, the LMOG of lowest molecular mass (M(W) 88) we are aware of. The efficiencies of the LMOGs, based the diversity of liquids gelated, the minimum amount required for gelation of a liquid at room temperature, and the temporal and thermal stabilities of the gels formed, have been investigated as a function of the number, length, and substitution pattern of their n-alkyl chains. The gels are thermally reversible and require generally very low concentrations (<2 wt %) of an LMOG. Some of the LMOGs with shorter chains are more efficient than their longer chained analogues. The structural and thermodynamic properties of the gels have been examined by IR, DSC, and X-ray diffraction techniques. Polarizing optical microscopic analyses of the gels show that the nature of gelator aggregates depends mainly on the alkyl chain length. Changes in the aggregation ability have been examined systematically by perturbing the molecular structure.     

Design, synthesis and stimuli responsive gelation of novel stigmasterol-amino acid conjugates

An efficient synthesis of three novel stigmasterol-amino acid (glycine, L-leucine and L-phenylalanine) conjugates as stimuli responsive gelators is reported. The gelation properties of the prepared compounds were investigated in a variety of organic as well as aqueous solvents. The most striking finding of our investigation was that the hydrochloride salts of the prepared conjugates acted as gelators, whereas the neutral conjugates were either non-gelators or formed only a weak gel in anisole. The hydrochloride salts of stigmasteryl glycinate and L-leucinate form gels in n-alcohols (n=4-10) and in ethane-1,2-diol, and that of stigmasteryl L-phenylalaninate forms gels in aromatic solvents and in tetrachloromethane. These unique properties of the gelators were explored to prepare stimuli responsive, "acid-base" triggered reversible sol-gel transitions. The gelators and their gels were characterized by liquid and solid-state NMR as well as FT-IR. The morphology of their corresponding xerogels was investigated by SEM.     

Water-induced physical gelation of organic solvents by N-(n-alkylcarbamoyl)-L-alanine amphiphiles

A series of amino acid-based gelators N-(n-alkylcarbamoyl)-L-alanine were synthesized, and their gelation abilities in a series of organic solvents were tested. No gelation was observed in pure solvents employed. All the amphiphilic molecules were found to form stable organogels in the solvents in the presence of a small amount of water, methanol, or urea. The volume of solvent gelled by a given amount of the gelator was observed to depend upon the volume of added water. The gelation behavior of the amphiphiles in a given solvent containing a known volume of water was compared. The effects of chirality and substitution on the acid group on the gelation ability were examined. Although the corresponding N-(n-tetradecylcarbamoyl)-DL-alanine was found to form only weak organogel in pure solvents, the achiral amphiphilic compound N-(n-tetradecylcarbamoyl)-β-alanine, however, did not form gel in the absence of water. The methyl ester of N-(n-tetradecylcarbamoyl)-L-alanine was also observed to form gels in the same solvents, but only in the presence of water. The organogels were characterized by several techniques, including (1)H NMR, Fourier transform IR, X-ray diffraction, and field emission scanning electron microscopy. The thermal and rheological properties of the organogels were studied. The mechanical strength of the organogel formed by N-(n-tetradecylcarbamoyl)-DL-alanine was observed to increase upon the addition of water. It was concluded that water-mediated intermolecular hydrogen-bonding interaction between amphiphiles caused formation of supramolecular self-assemblies.     

Geminal bis-ureas as gelators for organic solvents: gelation properties and structural studies in solution and in the gel state

Several geminal bis-urea compounds were synthesised by means of an acid-catalysed condensation of various benzaldehydes with different monoalkylureas. Many of these compounds form thermoreversible gels with a number of organic solvents at very low concentrations (<3mM) and which are stable to temperatures higher than 100 degrees C. Electron microscopy revealed a three-dimensional (3D) network of intertwined fibres, which are several tens of micrometers long and have a width ranging from approximately 30 to 300 nm. The possible aggregate forms and aggregate symmetries were evaluated by means of molecular mechanics calculations. 1H NMR, 2D NMR, 13C NMR and 13C-CP/MAS NMR techniques were used to obtain information about the aggregation and possible aggregate symmetry of geminal bis-ureas in solution, in the gel state, and in the solid state.     

Assembly and characterization of novel hydrogen-bond-induced nanoscale rods

A class of bis-urea compounds with perylene bisimide was synthesized and characterized successfully. (1)H NMR and fluorescence spectra confirmed that strong hydrogen-bonding interactions between neighboring urea groups were formed. Interestingly, the photocurrent measurement showed that the self-assembled films of bis-urea compounds could produce steady and rapid anodic photocurrent responses. The TEM images indicated that well-defined nanoscale rods with uniform diameter distribution could be fabricated by self-assembly of hydrogen-bonding interactions and pi-pi stacking interactions of perylene rings.     

Supramolecular nanoribbons and nanoropes generated from hydrogen-bonded supramolecular polymers containing perylene bisimide chromophores

A perylene bisimide anchored with melamine hydrogen-bonding units has been prepared, and its supramolecular polymerization upon binding with N-dodecylcyanurate (CA) was examined. The resulting flexible supramolecular polymers self-organized via a pi-pi stacking interaction between perylene chromophores, affording ribbonlike aggregates in cyclic alkanes and ropelike aggregates in acyclic alkanes to form gels. [structure: see text]     

Organic solvent high-field amplified stacking for basic compounds in capillary electrophoresis

Many water-miscible organic solvents, especially acetonitrile and acetone, bring along significant degrees (approximately 30 times) of stacking by electroinjection through high-field amplified injection for the basic compounds compared to that for aqueous buffers or water. The relative stacking of different compounds in acetonitrile or acetone is different compared to that for water. Stacking by electroinjection in organic solvents is less stringent and easier to accomplish in practice. Acids and salts, in aqueous solutions, can ruin the stacking for both organic and aqueous solvents; however, this effect can be better tolerated by diluting the sample in acetonitrile. Thus, this stacking is termed "organic solvent high-field amplified injection". This stacking by electroinjection is enhanced by increasing the electrophoresis buffer concentration and can be better than that by pressure injection. From the practical aspects, some cationic drugs present in serum such as amiodarone can be detected at the therapeutic levels by electroinjection on the capillary after protein precipitation by acetonitrile.     

Computational comparison of the stacking interactions between the aromatic amino acids and the natural or (cationic) methylated nucleobases

The strongest gas-phase MP2/6-31G*(0.25) stacking energies between the aromatic amino acids and the natural or methylated nucleobases were considered. The potential energy surfaces of dimers were searched as a function of the vertical separation, angle of rotation and horizontal displacement between monomers stacked according to their centers of mass. Our calculations reveal that the stacking interactions of adducts for a given nucleobase are dependent on the methylation site (by up to 20 kJ mol(-1)), where the relative magnitudes of the interactions are determined by the dipole moments of the adducts and the proton affinities of nucleobase methylation sites. Nevertheless, the differences in the (gas-phase) stacking of methylated adducts are small compared with the differences between the stacking of the corresponding natural and methylated nucleobases. Indeed, methylation increases the stacking energy by up to 40 kJ mol(-1) (or 135%). Although immersing the dimers in different solvents decreases the gas-phase stacking energies with an increase in the polarity of the environment, base methylation still has a significant effect on the nucleobase stacking ability in solvents with large dipole moments, and, perhaps more importantly, environments that mimic enzyme active sites. Our results shed light on the workings of DNA repairs enzymes that selectively remove a wide variety of alkylated nucleobases over the natural bases.     

Dipeptide-based low-molecular-weight efficient organogelators and their application in water purification

The development of new low-molecular-weight gelators for organic solvents is motivated by several potential applications of gels as advanced functional materials. In the present study, we developed simple dipeptide-based organogelators with a minimum gelation concentration (MGC) of 6-0.15 %, w/v in aromatic solvents. The organogelators were synthesized using different L-amino acids with nonpolar aliphatic/aromatic residues and by varying alkyl-chain length (C-12 to C-16). The self-aggregation behavior of these thermoreversible organogels was investigated through several spectroscopic and microscopic techniques. A balanced participation of the hydrogen bonding and van der Waals interactions is crucial for efficient organogelation, which can be largely modulated by the structural modification at the hydrogen-bonding unit as well as by varying the alkyl-chain length in both sides of the hydrophilic residue. Interestingly, these organogelators could selectively gelate aromatic solvents from their mixtures with water. Furthermore, the xerogels prepared from the organogels showed a striking property of adsorbing dyes such as crystal violet, rhodamine 6G from water. This dye-adsorption ability of gelators can be utilized in water purification by removing toxic dyes from wastewater.     

Optically transparent hydrogels from an auxin-amino-acid conjugate super hydrogelator and its interactions with an entrapped dye

Low-molecular-weight organic hydrogelators (LMHGs) that can rigidify water into soft materials are desirable in various applications. Herein, we report the excellent hydrogelating properties of a simple synthetic auxin-amino-acid conjugate, naphthalene-1-acetamide of L-phenylalanine (1-NapF, M(w)=333.38?Da), which gelated water even at 0.025?wt?%, thereby making it the most-efficient LMHG known. Optically transparent gels that exhibited negligible scattering in the range 350-900?nm were obtained. A large shift from the theoretical pK(a) value of the gelator was observed. The dependence of the minimum gelator concentration (MGC) and the gel-melting temperatures on the pH value indicated the importance of H-bonding between the carboxylate groups on adjacent phenylalanine molecules in the gelator assembly. FTIR spectroscopy of the xerogels showed a β-sheet-like assembly of the gelator. Variable-temperature (1)H?NMR spectroscopy demonstrated that π stacking of the aromatic residues was also partly involved in the gelator assembly. TEM of the xerogel showed the presence of a dense network of thin, high-aspect-ratio fibrillar assemblies with diameters of about 5?nm and lengths that exceeded a few microns. Rheology studies showed the formation of stable gels. The entrapment of water-soluble dyes afforded extremely fluorescent gels that involved the formation of J-aggregates by the dye within gel. A strong induced-CD band established that the RhoB molecules were interacting closely with the chiral gelator aggregates. H-bonding and electrostatic interactions, rather than intercalation, seemed to be involved in RhoB binding. The addition of chaotropic reagents, as well as increasing the pH value, disassembled the gel and promoted the release of the entrapped dye with zero-order kinetics.