丙烯酸及其接枝物对纳米CaCO3/PP结晶与熔融行为的影响

制备了丙烯酸(AA)及其接枝聚丙烯(PP—g-AA)改性的纳米CaC03／PP复合材料。用DSC研究了纳米CaCO3对PP、PP-g-A和AA对纳米CaCO3／PP中PP结晶与熔融行为的影响。结果表明：随纳米CaCO3用量增加，PP结晶与熔融温度提高，PP—g—AA加入使PP结晶温度进一步提高，PP的结晶温度也随从用量增加而提高；在过氧化二异丙苯(DCP)存在下，少量AA能明显提高PP的结晶温度，但增加从用量对结晶温度的影响较小；WAXD证实纳米CaCO3／PP复合材料中存在β晶。     

硅氧烷液晶共聚物作为β晶成核剂对等规聚丙烯结晶结构与形态的影响

采用广角X射线衍射(WAXD)与偏光显微镜(POM)等手段研究了硅氧烷液晶共聚物(LCP-O2)作为新型成核剂对聚丙烯(PP)共混样品结晶结构与形态的影响.结果表明,低浓度的LCP-O2在PP共混体系中起到异相成核的作用,使PP的晶核数目增多,球晶细化,并提高了结晶速度,同时也诱导出了β晶的形成.LCP-O2的成核效果主要依赖于其在PP中的相对含量、液晶的分子结构与结晶的热处理过程,且随着结晶温度或成核剂含量的增加,对应PP试样的β晶含量(Kβ)呈现先增加,后降低的趋势.当LCP-O2质量分数为1.0%,在130℃等温结晶1h,对应PP试样的Kβ最大,为58%.此外,属于单斜晶的α球晶呈现黑白颜色,晶束呈放射状生长,边界清晰;而属于三方晶的β球晶亮度要高于α球晶,其颜色艳丽多彩,束状晶片聚集体呈支化生长,内部排列比α晶疏散,边界相对模糊,且β晶与α晶的形态分别在157和171℃完全消失.     

聚丙烯合金PP-c的晶相结构及形态

用偏光显微镜和广角X射线衍射研究了聚丙烯合金PP c的结晶形态.发现PP -c的晶相结构中不仅存在α-晶型聚丙烯(α- PP ) ,也存在着β-晶型聚丙烯(β-PP) .计算了不同乙烯含量PP c的结晶度和β- PP含量.表明随着乙烯含量的增加,β- PP的含量增加,而PP- c的结晶度下降.通过与同等熔融结晶条件下等规聚丙烯(iPP)的结晶形态相比较,发现乙烯组分含量的增加,改变了球晶的生长状况,降低了PP- c晶相的晶体完整性.     

大分子相容剂改性Mg(OH)2/PP阻燃材料的性能

用双螺杆挤出机熔融挤出法制备了相容剂改性氢氧化镁/聚丙烯[Mg(OH)2/PP]阻燃材料。研究了马来酸酐接枝聚丙烯(PP-g-MA),马来酸酐接枝(乙烯/辛烯)共聚物(POE-g-MA)和马来酸酐接枝聚醋酸乙烯酯(EVA-g-MA)3种大分子相容剂对阻燃材料的熔体流动性、结晶行为、力学性能和断口形态的影响。结果表明:相容剂PP-g-MA和POE-g-MA的加入使阻燃材料的熔体流动速率降低,PP结晶温度提高,EVA-g-MA的加入使阻燃材料熔体流动速率数提高;Mg(OH)2对PP结晶存在异相成核作用,Mg(OH)2的加入使PP的冲击强度、拉伸强度和断裂伸长率降低,杨氏模量提高;相容剂改性后Mg(OH)2/PP阻燃材料的拉伸强度提高,其中以PP-g-MA最为明显,而POE-g-MA则提高了阻燃材料的冲击强度。     

官能团化聚丙烯对Mg(OH)2/PP结晶与熔融行为的影响

制备了官能团化聚丙烯改性Mg(OH)2/PP复合材料，并用DSC研究了改性PP，Mg(OH)2/PP和改性Mg/(OH)2/PP中PP的结晶与熔融行为，官能团化PP（FPP），丙烯酸（AA）和Mg(OH)2都能提高PP的结晶温度，归结于异相成核作用，AA和FPP加入进一步使Mg(OH)/PP中PP结晶温度提高，但AA用量增加对PP结晶温度无影响。     

聚丙烯—聚对苯二甲酸乙二酯共混物的扫描电镜观察(Ⅱ)

使用扫描电镜和化学蚀刻的方法研究了聚丙烯(PP)和聚对苯二甲酸乙二酯(PET)共混物(PP:PET:9:1)在不同温度结晶时的形态结构,并与在相应条件下结晶的纯PP样品作比较。结果表明:(1)纯PP在0℃结晶时没有观察到明显的球晶,部分区域呈树枝晶,在30℃以上结晶时呈三类不同形态球晶;在0—140℃范围结晶的PP—PET共混物中都没有观察到第三类球晶和树枝晶。(2)在0—140℃温度下结晶的共混物中两组份互不相溶,PET都是以直径为1—5μ的小球分散在PP连续相的球晶内和球晶之间;PET的加入使PP球晶的尺寸比在相应条件结晶的纯PP球晶小,同时球晶的大小也随结晶温度降低而变小;PET小球与PP连续相之间存在着易受蚀刻的界面层。     

聚丙烯的结晶形态调控与高性能化

聚丙烯作为目前最重要的通用塑料之一,对其进行高质化改性具有重大的现实意义.基于聚丙烯的同质多晶态行为,加入成核剂进行β结晶改性是改善聚丙烯韧性和热稳定性的有效方式.过去的研究主要关注结晶度、β晶含量等对性能的影响.而近年来我们提出通过调控聚丙烯的β结晶形态来实现其高性能化的新思路,并开展了卓有成效的研究工作:(1)利用小分子成核剂的溶解性及自组装影响聚丙烯的结晶行为,获得了如球晶、横晶、花瓣状晶等形态,实现了对β结晶形态的有效调控;(2)特定的结晶形态能够使聚丙烯的韧性显著增加,并且热变形温度进一步提高,证实结晶形态会对宏观性能发挥重要作用;(3)β结晶形态调控有利于获得更佳的成孔均匀性与高的孔隙率,对制备高品质锂电池隔膜有明显的指导意义.结晶形态调控可望成为实现结晶性聚合物高性能化与功能化通行的、高效的策略.     

向列相液晶共聚物作为β晶成核剂对等规聚丙烯结晶结构与热性能的影响

采用接枝聚合的方法,合成了一种新型聚硅氧烷类向列相液晶共聚物(LCP-H4),然后将LCP-H4与PP在一定工艺条件下密炼共混,得到了一系列的共混样品,采用WAXD、POM与DSC等研究了LCP-H4作为成核剂对PP样品结晶结构、形态与热性能的影响.结果表明,具有独特"液晶"性能的LCP-H4为PP结晶提供了更多的带自由能的晶核与较多的活性点,起到了异相成核的作用,既提高了PP的结晶速度、结晶温度和结晶度,又减小了球晶的尺寸,同时也改变了PP的结晶结构、形态及热力学与动力学,诱导出了β晶.此外,随着增加LCP-H4的含量及结晶温度,对应PP试样的β晶含量(Kβ)呈现先增加后降低的趋势,当LCP-H4含量为0.9%,在128℃等温结晶1h,对应成核PP的Kβ最大,为54%.     

纳米碳酸钙/庚二酸复合成核剂对热致相分离法制备聚丙烯微孔膜的影响

以大豆油/邻苯二甲酸二丁酯(DBP)为混合稀释剂,采用热致相分离法(TIPS)制备聚丙烯(PP)微孔膜.研究了纳米碳酸钙成核剂、纳米碳酸钙/庚二酸复合成核剂对PP/大豆油/DBP(30/42/28,质量比)混合体系中PP结晶、熔融性能和PP微孔膜微观结构的影响.结果表明,单一纳米碳酸钙成核剂加入量为PP的0%~4%(质量百分率)时,PP/DBP/大豆油体系中PP熔融曲线上对应的峰值温度(Tpm)降到150.7~151.3℃,而纯PP的熔融峰值温度为165℃;DSC实验结果还显示加入1%~4%纳米碳酸钙和0.5%庚二酸后,导致PP的熔融曲线上出现了熔融双峰,说明纳米碳酸钙/庚二酸复合成核剂与单一成核剂相比有明显地促进β晶生成的作用,宽角X射线衍射(WAXD)实验进一步证实了β晶的存在.单一纳米碳酸钙成核剂对PP微孔膜的球晶结构和微观孔结构影响不大;加入纳米碳酸钙/庚二酸复合成核剂明显影响PP微孔膜的球晶结构和微观孔结构,其中0.5%庚二酸和1%纳米碳酸钙组成的复合成核剂制得的PP微孔膜的球晶结构明显,微孔膜孔径小且分布均匀;进一步增加纳米碳酸钙用量,PP微孔膜生成了许多细小的边界模糊的不规则结晶,微孔膜孔径不规则且尺寸较大,这与此时PP形成β晶结构有关.     

β成核剂修饰多壁碳纳米管增强聚丙烯纳米复合材料的分散及结晶行为

利用非共价键改性方法,用芳香二羧酸酰胺类的β成核剂(β-NA)改性多壁碳纳米管(MWCNTs),采用溶液法制备了聚丙烯(PP)/β-NA-MWCNTs复合材料.通过广角X射线衍射(WAXD)分析了复合材料的结晶形态,结果表明β-NA-MWCNTs诱导聚丙烯生成大量β晶,同时提高了复合材料的结晶度.含5.0 wt％β-N...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.