Copper(II) oxide solubility behavior in aqueous sodium phosphate solutions at elevated temperatures

A platinum-lined, flowing autoclave facility is used to investigate the solubility behavior of copper(II) oxide (CuO) in aqueous sodium phosphate solutions at temperatures between 19 and 262°C. Copper solubilities are observed to increase continuously with temperature and phosphate concentration. The measured solubility behavior is examined via a Cu(II) ion hydrolysis/complexing model and thermodynamic functions for the hydrolysis/complexing reactions are obtained from a leastsquares analysis of the data. Altogether, thermochemical properties are established for five anionic complexes: Cu(OH) ₃ ^– , Cu(OH) ₄ ^2– , Cu(OH) ₂ (HPO ₄ ) ^2– , Cu(OH) ₃ (H ₂ PO ₄ ) ^2– , and Cu(OH) ₂ (PO ₄ ) ^3– . Precise thermochemical parameters are also derived for the Cu(OH)⁺ hydroxocomplex based on CuO solubility behavior previously observed (Ref. 3) for pure water at elevated temperatures. The relative ease of Cu(II) ion hydrolysis is such that Cu(OH) ₃ ^– species become the preferred hydroxocomplex for pH9.4.Prepared for presentation at the Fourth International Symposium on solubility Phenomena, Rensselaer Polytechnic Institute, August 1990.     

Comparative studies on hydrolysis of bis(p-nitrophenyl) phosphate catalyzed by short- and long-alkyl-multiamine metallomicelles

Four short- and long-alkyl-multiamine ligands L¹–L⁴ have been synthesized and characterized. The catalytic efficiency of complex CuL¹ and functional metallomicelles CuL²–CuL⁴ were comparatively investigated for the hydrolysis of bis(p-nitrophenyl) phosphate (BNPP) in buffered solution at 30 °C. The ternary kinetic model for metallomicellar catalysis was suggested to analyze the experimental data. The kinetic and thermodynamic parameters k^′_N, K_T and pK_a were obtained. The results indicated that the complexes with 1:1 ratio of ligands L²–L⁴ to copper(II) ion were the kinetic active catalysts, and the deprotonized Cu(II) complex formed by activated water molecule was the real active species for BNPP catalytic hydrolysis. The real rate constant of the reaction catalyzed by CuL¹–CuL⁴ was 4.00 × 10⁻⁶, 7.44 × 10⁻⁵, 1.42 × 10⁻⁴ and 4.10 × 10⁻⁴ s⁻¹, respectively. The effects of ligand and microenvironment on the hydrolytic reaction of BNPP have been discussed in detail.     

Synthesis,structures and properties of two novel copper(II) complexes with hydrogen bonding supramolecular networks

Two novel complexes, [Cu(HL)₂(H₂O)]₂(OH)₂(ClO₄)₂·1.5H₂O (1) and [Cu(HL)₂]Cl₂·4H₂O (2), have been prepared by reacting copper salts with the 4-amino-3-ethyl-1,2,4-triazole-5-thione (HL) ligand in neutral solution and in HCl (6 mol L^–1) medium, respectively. They were characterized by FT-IR and u.v.–vis. spectra, and the structures were determined by single crystal X-ray diffraction techniques. In both complexes, the triazole ligand chelated the metal ions through the amine and thione substituents on the five-membered ring. Complex (1) has a square-pyramidal copper(II) ion coordinated by two triazole ligands and one water molecule. Unlike (1), the Cu²⁺ ion in (2) displays its characteristic Jahn–Teller distortion with the distance of the Cl^– anions to metal ion further away than that of the triazole ligands. The most intriguing structural features of the title complexes are that the HL ligands chelate copper(II) ions through the N(1) and S(1) atoms, in a cis mode in (1) and a trans mode in (2). In both cases, self-assembled crystals, by supramolecular contacts simultaneously, form two multi-dimensional frameworks.     

Extraktion von Lanthaniden aus einer Lösung des Dinatriumsalzes der Äthylendiamintetraessigsäure mit Benzollösung des Methyl-tri-n-octylammoniumchlorids

The extraction of Pr, Eu and Yb from a solution of Komplexon III (a disodium salt of ethylenediamine-tetraacetic acid) at constant ionic strength with a solution of Aliquat-336 (tri-n-octyl-methylammonium chloride) in benzene has been investigated. The dependence of the distribution coefficient on the pH of the aqueous phase was studied. The formation of the following kinds of extractable complexes was established: for Eu and Yb:LnY(OH)^2–, for Pr:LnY(OH)₂ ^3– at pH=ca. 9 andLnY ^– at pH lower than 7.

---

---

Mit 4 Abbildungen     

Copper(II) Cyanoacetate Polymer: Synthesis and Structure

A new copper carboxylate polymer with cyanoacetate anion as a ligand was synthesized and studied using X-ray diffraction, IR, and EPR spectroscopy. The crystal is tetragonal: a= 14.702(2) Å, c= 13.470(3) Å, Z= 8, space group I4₁/a, and R= 0.0634. The copper atoms in the centrosymmetric dimeric fragment have a square-pyramidal surrounding with the CuO₄N coordination core and are joined through four bidentate bridging anions of cyanoacetic acid Cu(1)"–O(1A) 1.931(4) Å, Cu(1)"–O(1B) 1.926(4) Å, Cu(1)–O(2B) 2.018(3) Å, Cu(1)–O(2A) 2.036(4) Å, and Cu(1)–N(1A)" 2.206(5) Å). The Cu···Cu" distance in the dimer is 2.709 Å. The copper atom is extended from the mean equatorial plane toward the axial nitrogen atom by 0.23 Å. EPR data confirm strong antiferromagnetic interaction (2J –275 cm^–1) between the copper(II) ions of the dimeric fragment, whereas the interaction between the dimers is significantly weaker (J< 0.3 cm^–1).     

Kinetics of the Dissolution of Silver in Thiocarbamide Solutions

The dependence of the rate of solution of silver on the pH of the solution, the ratio of the iron(III) and thiocarbamide concentrations, and the temperature has been determined. The rate constants for the solution of silver (k _i = 2.3·10^–4 to 9.6·10^–4s^–1) at temperatures from 283-298 K have been calculated and from the temperature dependence of the rate constant the activation energies have been calculated: 68.84 kJ/mol for kinetic control of the rate of solution and 26.06 kJ/mol in the adsorption inhibition region.     

The interaction of alkaline solutions of potassium borohydride with LaNi4.5M0.5 (M = Ni,Mn, Cr,Co, Fe,Cu, Al) intermetallic compounds

The behavior of LaNi_4.5M_0.5 (M = Ni, Mn, Cc Co, Fe, Cu, Al) interinctallic compounds (IMC) in alkaline solutions of KBH₄ (0.1; 1.0; 4.0 mol L^–1 KOH) Was investigated in the temperature range 298–318 K. The catalytic hydrolysis of KBH₄ is zero order with respect to KBH₄ and not order with respect to IMC. Activation energies of the catalytic hydrolysis of KBH₄ in the presence of' IMC are in the range of 60–65 U mol^–1. The rate of hydrolysis of KBH₄ increases with the concentration of the KOH solution. The hydrogenation of LaNi_4.5M_0.5 in alkaline solutions of KBH₄ yields -hybride phases for M = Min, Cr, Co, Cu, Al and -hybride phases for M = Ni, Fe.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1632–1635, July, 1996.     

Mode of formation of some rare copper(II) and lead(II) minerals from aqueous solution,with particular reference to deposits at tiger,Arizona

Summary Free energies of formation of the rare copper(II) secondary minerals linarite, (Pb,Cu)₂SO₄(OH)₂, caledonite, Pb₅Cu₂CO₃(SO₄)₃(OH)₆, and wherryite, Pb₄CuCO₃(SO₄)₂O(OH,Cl)₂, and of the complex lead(II) species leadhillite, Pb₄SO₄(CO₃)₂(OH)₂, have been estimated using solution techniques. Values derived are: –1212(1), –4328(2), –2871(1), and –2525(4) kJ mol^–1 at 298.2K respectively, and have been used to construct stability field diagrams involving these, and related species. They are anomalous in the sense that they are not the usually found sulphates and carbonates of copper(II) and lead(II) in the natural environment. The data, together with field observations of mineral associations, has been used to reconstruct part of the chemical paragenetic sequence of the oxidized zone of the Mammoth —St. Anthony Mine, Tiger, Arizona, U.S.A. Many of the rare species above and other complex halides of copper(II), silver(I) and lead(II) formed under conditions where and a_{SO 4} ^2– were comparatively low, and around neutral values of pH. Several trends in the chemistry of the development of the anomalous oxidized zone at Tiger are apparent, and these are discussed in the light of the above findings.     

Studies on the Hydrolytic Behavior of Zirconium(IV)

The stability constants of zirconium(IV) hydrolysis species have been measured at 15, 25, and 35 °C [in 1.0 mol-dm^–3 (H,Na)ClO₄] using both potentiometry and solvent extraction. In addition, the solubility of [Zr(OH)₄(am)] has been investigated in a 1 mol-dm^–3 (Na,H)(ClO₄,OH) medium at 25 °C over a wide range of –log [H⁺] (0-15). The results indicate the presence of the monomeric species Zr(OH)³⁺, Zr(OH)₂ ²⁺, Zr(OH)₃ ⁺, and Zr(OH)₄ ⁰(aq) as well as the polymeric species Zr₄(OH)₈ ⁸⁺ and Zr₂(OH)₆ ²⁺. The solvent extraction measurements required the use of acetylacetone. As such, the stability constants of zirconium(IV) with acetylacetone were also measured using solvent extraction. All stability constants were found to be linear functions of the reciprocal of temperature (in kelvin) indicating that H ^o and S ^o are both independent of temperature (over the temperature range examined in the study). The results of the solubility experiments have shown four distinctly different solubility regions. In strongly acidic solutions, the solubility is controlled by the formation of polynuclear hydrolysis species in solution whereas in less acidic solution the formation of mononuclear hydrolysis species becomes dominant. The largest portion of the solubility curve is controlled by equilibrium with aqueous Zr(OH)₄ ⁰(aq) where the solubility is independent of the proton concentration. In alkaline solutions, the solubility increases due to formation of the zirconate ion. The middle region was used to determine the solubility constant (log *K _s10) of Zr(OH)₄(s). From the data in the alkaline region, a value of the stability of the zirconate ion has been determined. This is the first time that the possible evidence for the zirconate ion has been identified in aqueous solution that has previously been found only in the solid phase.     

A selective and sensitive spot-test for gold

Summary A new spot test for gold has been developed, based on the oxidation of colourless phenolphthalin to red phenolphthalein in alkaline medium. The sensitivity is 0.2g of gold on a spot-plate and 0.15g on filter paper. Ce(IV) interferes seriously, and Pt(IV) at high concentrations, but Pd(II), Cu(II), Fe(III), Cr(III), Ni(II), UO₂(II), ClO₄ ^–, CrO₄ ^2–, BrO₃ ^–, IO₃ ^–, MoO₄ ^2–, and WO₄ ^2– do not.

---

Zusammenfassung Eine neue Tüpfelreaktion für Gold wurde entwickelt, die auf der Oxydation des farblosen Phenolphthalins zu rotem Phenolphthalein in alkalischem Milieu beruht. Die Empfindlichkeit beträgt auf der Tüpfelplatte 0,2g Gold, auf Filterpapier 0,15g. Cer(IV) stört stark, Pt(IV) in hoher Konzentration; hingegen stören Pd(II), Cu(II), Fe(III), Cr(III), Ni(II), UO₂(II), ClO₄ ^–, CrO₄ ^2–, BrO₃ ^–, JO₃ ^–, MoO₄ ^2– und WO₄ ^2– nicht.

     

Die kinetische polarographische Stufe des Urans in Gegenwart von Chlorat-Ionen

An increase of the 2nd polarographic uranium(VI) wave has been observed in the presence of chlorate ions in HClO₄–NaClO₄, or HClO₄–NaClO₄–NaCl supporting electrolyte, resp. The polarographic measurements at different temperatures and at various perchloric acid concentrations show that this increase is due to a kinetic U(III)-U(IV) current. The activation parameters of the U(III)-U(IV) oxidation reaction with ClO₃ ^– have been calculated usingKautecky's method.The approximately 5fold increase of the 2nd polarographic wave allows the determination of small amounts of uranium (10^–5–10^–6 mole/l).

---

---

Mit 2 Abbildungen     

Crystal Structure of a New Modification of <Emphasis Type="Italic">cis</Emphasis>-Bis(pivalyltrifluoroacetonato)copper(II)

Powder and single-crystal X-ray diffraction study of cis-bis(pivalyltrifluoro-acetonato)copper(II) has been performed (Bruker AXS P4 automatic diffractometer, MoK _β radiation, t = −25°C). Crystal data for C₁₆H₂₀CuF₆O₄: a= 9.980(7) Å, b = 19.236(13) Å, c = 20. 771(14) Å, space group Pbca, V = 3987(5) ų, Z = 8, d _calc = 1.512 g/cm³. The square-planar environment of the Cu atom (Cu-O_av 1.904 Å, =O-Cu-O_av 92.4°) is completed to bipyramidal by the atoms of the neighboring molecules, Cu...F 2.78 Å and Cu...C_γ 3.30 Å. The complex forms centrosymmetric pseudo dimers with Cu...Cu distances of 4.59 Å.Original Russian Text Copyright © 2004 by S. A. Gromilov, I. A. Baidina, P. A. Stabnikov, and G. V. Romanenko__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 893–898, September–October, 2004.     

Electrochemical synthesis and magnetic studies of neutral transition metal imidazolates and pyrazolates

Summary The single-step electrochemical synthesis of neutral transition metal complexes of imidazole, pyrazole and their derivatives has been achieved at ambient temperature. The metal was oxidized in an Me₂CO solution of the diazole to yield complexes of the general formula: [M(Iz)₂] (where M = Co, Ni, Cu, Zn; Iz = imidazolate); [M(MeIz)₂] (where M = Co, Ni, Cu, Zn; MeIz = 4-methylimidazolate); [M(PrⁱIz)₂] (where M = Co, Ni, Cu, Zn; PrⁱIz = 2-isopropylimidazolate); [M(pyIz)_n] (where M = Co^III, Cu^II, Zn^II; pyIz = 2-(2-pyridyl)imidazolate); [M(Pz)_n] (where M = Co^III, Ni^II, Cu^II, Zn^II; Pz = pyrazolate); [M(ClPz)_n] and [M(IPz)_n] (where M = Co^III, Ni^II, Cu^II, Zn^II; ClPz = 4-chloropyrazolate; IPz = 4-iodopyrazolate); [M(Me₂Pz)_n] (where M = Co^II, Cu^I, Zn^II; Me₂Pz = 3,5-dimethylpyrazolate) and [M(BrMe₂Pz)_n] (where M = Co^II, Ni^II, Cu^I, Zn^II; BrMe₂Pz = 3,5-dimethyl-4-bromopyrazolate). Vibrational spectra verified the presence of the anionic diazole and electronic spectra confirmed the stereochemistry about the metal centre. Variable temperature (360-90 K) magnetic measurements of the cobalt and copper chelates revealed strong antiferromagnetic interaction between the metal ions in the lattice. Data for the copper complexes were fitted to a Heisenberg (S= ) model for an infinite one-dimensional linear chain, yielding best fit values of J=–62––65cm^–1 andg = 2.02–2.18. Data for the cobalt complexes were fitted to an Ising (S= ) model with J=–4.62––11.7cm^–1 andg = 2.06–2.49.     

Mineral formation from aqueous solution. Part III. The stability of aurichalcite, (Zn,Cu)5(CO3)2(OH)6, and rosasite (Cu,Zn)2(CO3)(OH)2

Summary The stabilities of rosasite, (Cu, Zn)₂ (CO₃)(OH)₂, and aurichalcite, (Zn, Cu)₅(CO₃)₂(OH)₆, have been determined by solution experiments with computer calculations of aqueous species in equilibrium with the solid phases. G _f ^o values for rosasite and aurichalcite have been calculated as –1100 and –2766 kJ mol^–1 respectively for specific samples of the two minerals. Most of the difference between the free energies of the compounds and those of malachite, Cu₂(CO₃)(OH)₂, and hydrozincite, Zn₅(CO₃)₂(OH)₆ arises from substitution of the minor cation in the crystal lattice. Malachite, zincian malachite and rosasite should be considered as a single isomorphous series.Part II: A. K. Alwan and P. A. Williams,Transition Acct. Chem., 4, 319 (1979).     

Indirekte Quecksilberbestimmung mit dem Nickelsalz der Antipyrin-4-Dithiocarbonsäure

Zusammenfassung Eine indirekte, extraktionsphotometrische Methode zur Bestimmung kleiner Quecksilbermengen wurde angegeben. Sie beruht auf der Verdrängung des Nickels aus farbigen, chloroformischen Lösungen von antipyrin-4-dithiocarbonsaurem Nickel. Die Herabsetzung der Lichtabsorption solcher Lösungen bei 575 nm ist der jeweiligen Quecksilbermenge proportional. Gold, Silber, Kupfer, Quecksilber(I), Cyanid und ÄDTA verhindern die Bestimmung. Der Einfluß sonstiger Fremdionen wurde untersucht.

---

Summary An indirect extraction-photometric method of determining small quantities of mercury has been worked out; it is based on the displacement of nickel from (4-DTA)₂Ni. A fall of the absorption of the color of this solution after extraction with the test specimen is measured at=575 nm. The determination is not possible in the presence of Au(III), Ag(I), Cu(I), Cu(II), Hg(I) and S₂O₃ ^2–, SO₃ ^2–, CN_– ions and Complexon III. Therefore a study was made of the influence of Tl(I), Pb(II), Cd(II), Ni(II), Co(II), Cr(III), Mn(II), Fe(II), Fe(III), Zn(II), Bi(III), Al(III), as well as of C₂O₄ ^2–, C₄H₄O₆ ^2–, Cl^–, I^–, SCN^–, SO₄ ^2–.

---

Résumé On a mis au point un dosage photométrique indirect, par extraction, de petites quantités de mercure; il repose sur le déplacement du nickel du composé (4-DTA)₂Ni. On mesure la diminution de l'absorption de la coloration de cette solution après l'extraction par l'échantillon étudié à = 575 nm. La présence des ions Au-III, Ag-I, Cu-I, Cu-II, Hg-I et S₂O₃ ^2–, SO₃ ^2–, CN^–, complexone-III rend le dosage impossible. On a étudié également l'influence de Tl-I, Pb-II, Cd-II, Ni-II, Co-II, Cr-III, Mn-II, Fe-II, Fe-III, Zn-II, Bi-III, Al-III, ainsi que de C₂O₄ ^2–, C₄H₄O₆ ^2–, Cl^–, I^–, SCN^–, SO₄ ^2–.

     

Thermodynamic Model for the Solubility of Cr(OH)3(am) in Concentrated NaOH and NaOH–NaNO3 Solutions

The main objective of this study was to develop a thermodynamic model for predicting Cr(III) behavior in concentrated NaOH and in mixed NaOH–NaNO₃ solutions for application to developing effective caustic leaching strategies for high-level nuclear waste sludges. To meet this objective, the solubility of Cr(OH)₃(am) was measured in 0.003 to 10.5 m NaOH, 3.0 m NaOH with NaNO₃ varying from 0.1 to 7.5 m, and 4.6 m NaNO₃ with NaOH varying from 0.1 to 3.5 m at room temperature (22 ± 2°C). A combination of techniques, X-ray absorption spectroscopy (XAS) and absorptive stripping voltammetry analyses, were used to determine the oxidation state and nature of aqueous Cr. A thermodynamic model, based on the Pitzer equations, was developed from the solubility measurements to account for dramatic increases in aqueous Cr with increases in NaOH concentration. The model includes only two aqueous Cr species, Cr(OH) ₄ ^– and Cr₂O₂(OH) ₄ ^– (although the possible presence of a small percentage of higher oligomers at >5.0 m NaOH cannot be discounted) and their ion–interaction parameters with Na⁺. The logarithms of the equilibrium constants for the reactions involving Cr(OH) ₄ ^– [Cr(OH)₃(am) + OH^– Cr(OH) ₄ ^– ] and Cr₂O₂(OH) ₄ ^2– [2Cr(OH)₃(am) + 2OH^– Cr₂O₂(OH) ₄ ^2– + 2H₂O] were determined to be –4.36 ± 0.24 and –5.24 ± 0.24, respectively. This model was further tested and provided close agreement between the observed Cr concentrations in equilibrium with Cr(OH)₃(am) in mixed NaOH–NaNO₃ solutions and with high-level tank sludges leached with and primarily containing NaOH as the major electrolyte.     

Crystal structures and spectroscopic properties of copper(II) pseudohalide complexes with two sparteine epimers, having a CuN4 chromophore

Tetrahedrally distorted copper(II) sparteine pseudohalide complexes having a CuN₄ chromophore were prepared and characterized by various spectroscopic techniques and X-ray crystallography. Among them, the crystal structures of copper(II) isothiocyanate complexes with two sparteine epimers, (−)-l-sparteine (Sp) and (−)-α-isosparteine (α-Sp), were determined. The N_Sp–Cu–N_Sp plane in copper(II) (−)-l-sparteine isothiocyanate [Cu(Sp)(NCS)₂] and copper(II) (−)-α-isosparteine isothiocyanate [Cu(α-Sp)(NCS)₂] is twisted by 58.2(6)° and 52.2(9)°, respectively, from the N_NCS–Cu–N_NCS plane. Based on the values of the dihedral angles and tilted distances of these two complexes, the geometry around Cu(II) in Cu(α-Sp)(NCS)₂ is more distorted from the perfect tetrahedron than that in Cu(Sp)(NCS)₂. For copper(II) sparteine pseudohalide (NCS⁻ and N₃⁻) complexes having a CuN₄ chromophore, the EPR and the optical spectral data were collected. The results of X-ray crystallography and ESR spectroscopy are in a good agreement with the assumption that the degree of distortion from planarity to tetrahedron will reduce the A_|| value of four-coordinate copper(II) sparteine pseudohalide complexes.     

Square-planar copper(II) complexes with a novel tetradentate amido-carboxylate ligand. Crystal structure of [Co(H2O)6][Cu(mda)] · 2H2O

A novel O—N—N—O-type tetradentate ligand H₄mda (H₄mda = malamido-N,N-diacetic acid) and the corresponding square-planar copper(II) complexes have been prepared and characterized. The mda^4– ligand coordinates to the copper(II) ion via two pairs of deprotonated ligating atoms (two carboxylate oxygens and two deprotonated amide nitrogens) with in-plane square chelation. A four-coordinate, square-planar geometry has been established crystallographically for the [Co(H₂O)₆][Cu(mda)] · 2H₂O complex. Structural data correlating the square-planar geometry of the [Cu(mda)]^2– unit are discussed in relation to information obtained for similar complexes. The i.r., electronic, absorption and reflectance spectra of the complexes are analysed in comparison with related complexes of known geometries.     

Copper(II) complexes with derivatives of salen and tetrahydrosalen: a spectroscopic, electrochemical and structural study

Salen type complexes, CuL, the corresponding tetrahydrosalen type complexes, Cu[H₄]L, and N,N′-dimethylated tetrahydrosalen type complexes, Cu[H₂Me₂]L, were investigated using cyclic voltammetry, and electronic and ESR spectroscopy. In addition, the analogous copper(II) complexes with a derivative of the tetradentate ligand ‘salphen’ [salphen=H₂salphen=N,N′-disalicylidene-1,2-diaminobenzene] were studied. Solutions of CuL, Cu[H₄]L and Cu[H₂Me₂]L are air-stable at ambient temperature, except for the complex Cu(^tBu, Me)[H₄]salphen [H₂(^tBu, Me)[H₄]salphen=N,N′-bis(2-hydroxy-3-tert-butyl-5-methylbenzyl)-1,2-diaminobenzene]. Cu(^tBu, Me)[H₄]salphen interacts with dioxygen and the ligand is oxidatively dehydrogenated (–CH₂–NH–→–C=N–) to form Cu(^tBu, Me)[H₂]salphen and finally, in the presence of base, Cu(^tBu, Me)salphen. X-ray structure analysis of Cu(^tBu, Me)[H₂Me₂]salen confirms a slightly tetrahedrally distorted planar geometry of the CuN₂O₂ coordination core. The complexes were subjected to spectrophotometric titration with pyridine, to determine the equilibrium constants for adduct formation. It was found that the metal center in the complexes studied is only of weak Lewis acidity. In dichlormethane, the oxidation Cu(II)/Cu(III) is quasireversible for the CuL type complexes, but irreversible for the Cu[H₄]L and Cu[H₂Me₂]L type. A poorly defined wave was observed for the irreversible reduction Cu(II)/Cu(I) at potentials less than −1.0 V. The ESR spectra of CuL at both 77 K and room temperature reveal that very well resolved lines can be attributed to the interaction of an unpaired electron spin with the copper nuclear spin, ¹⁴N donor nuclei and to a distant interaction with two equivalent protons [A^Cu(iso)≈253 MHz, A^N(iso)≈43 MHz, A^N(iso)≈20 MHz]. These protons are attached to the carbon atoms adjacent to the ¹⁴N nuclei. In contrast to CuL, the number of lines in the spectra of the complexes Cu[H₄]L and Cu[H₂Me₂]L is greatly reduced. At room temperature, only a quintet with a considerably smaller nitrogen shf splitting constant [A^N(iso)≈27 MHz] is observed. Both factors, planarity and conjugation, are thus essential for the observation of distant hydrogen shf splitting in CuL. Due to the C=N bond hydrogenation, the coordination polyhedra of the complexes Cu[H₄]L and Cu[H₂Me₂]L is more flexible and more sensitive to ligand modification than that of CuL. The electron-withdrawing effect of the phenyl ring of the phenylenediamine bridge is reflected in a reduction of the copper hyperfine coupling constants in Cu(^tBu, Me)[H₄]salphen and Cu(^tBu, Me)[H₂Me₂]salphen complexes [A^Cu(iso)≈215 MHz].     

Metal complexes of 6-chloropurine

Summary Five Cu(II), Pd(II), Cd(II), Pt(IV), and Au(III) complexes of 6-chloropurine have been obtained. The complexes were characterized by elemental analysis, IR,¹H-NMR and¹³C-NMR spectroscopy. On the basis of these data the structure of the complexes and the coordination of the ligand have been proposed. Thus, the physical and chemical methods supported evidence that in acidic medium, with exception of the Cu(II) complex, 6-chloropurine acts in the monoprotonated form neutralizing the charge of [PdCl₄]^2–, [CdCl₄]^2–, [AuCl₄]^– and [PtCl₆]^2– anions. The thermal behaviour of the complexes has also been studied.

---

Metallkomplexe von 6-Chlorpurin

Zusammenfassung Es wurden fünf Komplexe von 6-Chlorpurin mit Cu(II), Pd(II), Cd(II), Pt(IV) und Au(III) erhalten. Die Komplexe wurden mittels Elementaranalysen, IR,¹H-NMR und¹³C-NMR charakterisiert. Auf der Basis dieser Daten wurde eine Komplexstruktur und eine bestimmte Koordination der Liganden vorgeschlagen. Physikalische und chemische Methoden beweisen, daß im sauren Bereich [mit der Ausnahme von Cu(II)] das 6-Chlorpurin in der monoprotonierten Form koordiniert, wobei die Ladung von [PdCl₄]^2–, [CdCl₄]^2–, [AuCl₄]^– und [PtCl₆]^2– jeweils neutralisiert wird. Das thermische Verhalten der Komplexe wurde ebenfalls untersucht.