Strain-Induced Ring Expansion Reactions of Calix[3]pyrrole-Related Macrocycles

The recent discovery of calix[3]pyrrole, a porphyrinogen-like tripyrrolic macrocycle, has provided an unprecedented strain-induced ring expansion reaction into calix[6]pyrrole. Here, we synthesized calix[n]furan[3-n]pyrrole (n=1∼3) macrocycles to investigate the reaction scope and mechanism of the ring expansion. Single crystal X-ray analysis and theoretical calculations revealed that macrocyclic ring strain increases as the number of inner NH sites increases. While calix[1]furan[2]pyrrole exhibited almost quantitative conversion into calix[2]furan[4]pyrrole within 5 minutes, less-strained calix[2]furan[1]pyrrole and calix[3]furan were inert. However, N-methylation of calix[2]furan[1]pyrrole induced a ring-expansion reaction that enabled the isolation of a linear reaction intermediate. The mechanism analysis revealed that the ring expansion consists of regioselective ring cleavage and subsequent cyclodimerization. This reaction was further utilized for synthesis of calix[6]-type macrocycles.     

The first synthesis of a methano[60]fullerene with an electron-donating group at the methano-bridge carbon: synthesis and reaction of aminomethano[60]fullerene

[reaction: see text] Aminomethano[60]fullerene was synthesized for the first time as a trifluoromethanesulfonic acid salt by applying the Curtius rearrangement of azidocarbonylmethano[60]fullerene as the key reaction. Aminomethano[60]fullerene thus obtained was found to be able to react with various acyl chlorides to afford the corresponding amides.     

合成文拉法星的2-氮杂-1,3-丁二烯杂Diels-Alder反应与其 单分子环合竞争反应的研究

研究了不同的Lewis酸催化剂、温度、微波等条件下, 4-(4-甲氧苯基)-1-苯基-3-三甲基硅氧基-2-氮杂-1,3-丁二烯(2-ABDE)和亲二烯体环己酮发生杂Diels-Alder反应生成[4＋2]的六元环合产物噁嗪酮衍生物, 伴随的2-ABDE的 [2＋2]单分子环合, 生成单环β-内酰胺衍生物. 结果表明: 在低温条件下如(－78 ℃)[4＋2]反应占主导; 而在高温条件下(如135 ℃)仅进行[2＋2]反应. 微波加热方式可显著提高[2＋2]反应的速率和产率. 不同的Lewis酸催化剂对[2＋2]反应和[4＋2]反应的催化效率不同. Lewis酸的酸性强弱、软硬对2-ABDE的[2＋2]反应的催化能力起决定性作用.     

Mechanistic twist of the [8+2] cycloadditions of dienylisobenzofurans and dimethyl acetylenedicarboxylate: stepwise [8+2] versus [4+2]/[1,5]-vinyl shift mechanisms revealed through a theoretical and experimental study

Recently, it was reported that both dienylfurans and dienylisobenzofurans could react with dimethyl acetylenedicarboxylate (DMAD) to give [8+2] cycloadducts. Understanding these [8+2] reactions will aid the design of additional [8+2] reactions, which have the potential for the synthesis of 10-membered and larger carbocycles. The present Article is aimed to understand the detailed mechanisms of the originally reported [8+2] cycloaddition reaction between dienylisobenzofurans and alkynes at the molecular level through the joint forces of computation and experiment. Density functional theory calculations at the (U)B3LYP/6-31+G(d) level suggest that the concerted [8+2] pathway between dienylisobenzofurans and alkynes is not favored. A stepwise reaction pathway involving formation of a zwitterionic intermediate for the [8+2] reactions between dienylisobenzofurans that contain electron-donating methoxy groups present in their diene moieties and DMAD has been predicted computationally. This pathway is in competition with a Diels-Alder [4+2] reaction between the furan moieties of dienylisobenzofurans and DMAD. When there is no electron-donating group present in the diene moieties of dienylisobenzofurans, the [8+2] reaction occurs through an alternative mechanism involving a [4+2] reaction between the furan moiety of the tetraene and DMAD, followed by a [1,5]-vinyl shift. This computationally predicted novel mechanism was supported experimentally.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

Synthesis of the [5-7-6] tricyclic core of guanacastepene A via an intramolecular Mukaiyama aldol reaction

[reaction: see text] A synthesis of the tricyclic [5-7-6] skeleton of guanacastepene A is described. The six-membered ring of guanacastepene A was constructed by a Diels-Alder reaction. After several functional group transformations, it was coupled to beta-iodocyclopentenone. Lithium dimethylcuprate conjugate addition followed by an intramolecular Mukaiyama aldol reaction furnished the desired [5-7-6] tricyclic ring system.     

含金属基团的四价锡化合物的合成和取代反应动力学

通式为[Fe(CO)~2Cp]~2Sn(Ar)Cl的化合物为一组新的化合物,由[Fe(CO)~2Cp]~2SnCl2与AgMgX反应合成.[Fe(CO)~2Cp]~2Sn(Ar)Cl与各种亲核试剂Y发生取代反应给出另一组新的化合物[Fe(CO)~2Cp]~2Sn(Ar)Y,其中[Fe(CO)~2Sn(p-MeC~6H~4)Br经X射线衍射分析确定结构.[Fe(CO)~2Cp]~2Sn(1,3,5-Me~3C~6H~3)Cl与NAS~2CNMe~2或KSCN在不同溶剂中的反应动力学表明,由于锡易形成高配位中间体,尽管锡上两个较大的金属基团带来一定空间障碍,反应仍主要按SN2机理进行.     

杯芳烃与NO2硝化反应的研究

系统地研究了羟基杯[n]芳烃、甲氧基杯[n]芳烃和对特丁基杯[n]芳烃(n＝4, 6, 8)与NO₂气体的硝化反应, 发现可以成功地得到25,26,27,28-四羟基杯[4]芳烃、37,38,39,40,41,42-六羟基杯[6]芳烃以及25,26,27,28-四甲氧基杯[4]芳烃的对位全硝化产物, 产率分别为90%, 70%和40%; 尤其是25,26,27,28-四羟基杯[4]芳烃与NO₂的反应20 min即可完成. 认为共振式酚氧负离子结构是影响该类硝化反应的关键, 并对反应机理进行了探讨.     

Sequential pericyclic reaction of ene-diallenes: an efficient approach to the steroid skeleton

[reaction: see text] The one-pot construction of polycyclic aromatic systems from acyclic ene-bis(propargyl alcohols) was achieved through a tandem dual [2,3]-sigmatropic rearrangement/6pi-electrocyclic reaction/intramolecular [4 + 2] cycloaddition sequence. A steroidal compound was conveniently synthesized using the present method.     

One-pot synthesis of oxygen and nitrogen-bridged calix[2]arene[2]triazines

A simple and powerful one-pot reaction method was developed for the synthesis of heteracalixaromatics. In the presence of a base, one-pot macrocyclic condensation reaction between cyanuric chloride and 1,3-phenylene diols and diamines proceeded effectively under very mild conditions to afford a number of functionalised oxygen and nitrogen-bridged calix[2]arene[2]triazines in 33–54% yields. The method was applied in a multigram-scale (14.4 g) preparation of tetraoxacalix[2]arene[2]triazine.     

Thermolysis of benzannulated enyne-carbodiimides. Application in the synthesis of pyrido[1',2':1,2]pyrimido[4,5-b]indoles and related heteroaromatic compounds

Several derivatives of the pyrido[1',2':1,2]pyrimido[4,5-b]indoles 4 and the pyrazino[1',2':1,2]pyrimido[4,5-b]indoles 14 were synthesized by treatment of the benzannulated enyne-isocyanates 8 with the iminophosphoranes 9 and 13, respectively, for the aza-Wittig reaction followed by thermolysis. The reaction presumably proceeds through an initial formation of the corresponding benzannulated enyne-carbodiimides, such as 10, followed by a formal intramolecular hetero Diels-Alder reaction. Surprisingly, when the iminophosphorane 17 was used for condensation with 8, the expected pyrimido[1',6':1,2]pyrimido[4,5-b]indoles 16 were not obtained. Instead, the isomeric pyrimido[6',1':2,3]pyrimido[4,5-b]indoles 21 were isolated. Presumably, an alternative reaction pathway involving an initial [2 + 2] cycloaddition reaction to form 19 followed by ring opening could lead to 20 and, after an intramolecular radical-radical coupling, 21. Treatment of the urea derivatives 24 with dibromotriphenylphosphorane also produced in situ the benzannulated enyne-carbodiimides 25, which on thermolysis gave the isoquinolino[2',1':1,2]pyrimido[4,5-b]indoles 26. Methylation of 4a, 14a, and 26a with methyl iodide occurred exclusively at the site of the indolo nitrogen. The planar geometry of those novel heteroaromatic compounds, resembling many DNA-binding agents, makes them potential candidates as DNA intercalators.     

Rhodium(I)-Catalyzed Bridged [5+2] Cycloaddition of cis-Allene-vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis-ene-vinylcyclopropanes (cis-ene-VCPs) underwent Rh-catalyzed [5+2] reaction to give 5,7-fused bicyclic products, where vinylcyclopropane (VCP) acts as five-carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis-ene-VCPs to allene moiety, the corresponding cis-allene-VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7-fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

From propargylic biscarbonate to diaryl[n]dendralenes

An efficient cross-coupling reaction using a low cost carbon-supported palladium (Pd/C) catalyst for the synthesis of cross-conjugated compounds, diaryl[n]dendralenes, has been developed. The reaction of a propargylic biscarbonate with phenylboronic acid using Pd/C and phosphine ligand (S-Phos) gave 2,3-diphenyl[2]dendralene in high yield. We found that Pd/C was an effective catalyst for the synthesis of dialyl[n]dendralenes. The synthesis of various dendralenes was successfully achieved under the optimized conditions, giving dialyl [2] and [4] dendralenes in good yields.     

Synthesis of [2]rotaxanes by the catalytic reactions of a macrocyclic copper complex

We synthesized [2]rotaxanes by the reactions catalyzed by a macrocyclic Cu(I)-phenanthroline complex. The catalytic site was located inside the ring component so that the rotaxane could be selectively formed. A C-S bond-forming reaction and oxidative dimerization of alkyne was utilized for the efficient synthesis of a new series of [2]rotaxanes. [reaction: see text]     

2 + 2] cycloaddition reaction to Sc3N@I(h)-C80. The formation of very stable [5,6]- and [6,6]-adducts

The [2 + 2] cycloaddition reaction of Sc(3)N@I(h)-C(80) with benzyne was successfully conducted for the first time. The reaction affords both the [5,6]- and [6,6]-monoadducts with a four-membered ring attached to the cage surface on 5,6- and 6,6-ring fusions, respectively. The compounds were characterized by MALDI-TOF, NMR, UV-vis-NIR spectroscopy and single-crystal X-ray structure determination. The electrochemical behavior of both monoadducts was investigated. The [5,6]-regioisomer displays reversible cathodic behavior similar to that observed for the fulleropyrrolidines with a 5,6-addition pattern. Surprisingly, the [6,6]-regioisomer also exhibits reversible cathodic behavior. The interconversion reaction of the isomers was also explored, and the results showed that both monoadducts are thermally very stable.     

Highly selective Ir-catalyzed direct sixfold borylation of peripheral aromatic substituents on hexakisaryl-substituted [28]hexaphyrin(1.1.1.1.1.1)

Direct functionalization of aromatic substituents on [28]hexaphyrin was achieved by Ir-catalyzed borylation with the Smith-Miyaura-Hartwig protocol. High para selectivity was observed in the reaction on 2,6-dichlorophenyl and 2,6-dimethoxyphenyl substituents of [28]hexaphyrin. The reaction with [26]hexaphyrin resulted only in reduction of the substrate to provide [28]hexaphyrin without borylation, thus highlighting the importance of the oxidation state of substrates in this catalytic transformation. The borylated hexaphyrin can be used for Suzuki-Miyaura cross-coupling reaction.     

Rapid access to pyrimido[5,4-c]isoquinolines via a sulfur monoxide extrusion reaction

The scope of a sulfur monoxide extrusion reaction of pyrimido[4,5-b][1,4]benzothiazepines leading to pyrimido[5,4-c]isoquinolines was investigated. Thus, selective oxidation followed by nucleophilic displacement of the oxidized side chain sulfur group and subsequent extrusion reaction of sulfur monoxide in the ring, which can be conducted in a two-step sequence or in a one-pot procedure, produced novel pyrimido[5,4-c]isoquinolines, a class of compounds with potential biological and pharmaceutical applications. [reaction: see text].     

Concise and efficient synthesis of 4-fluoro-1H-pyrrolo[2,3-b]pyridine

Two routes describing the preparation of 4-fluoro-1H-pyrrolo[2,3-b]pyridine (4a) from 1H-pyrrolo[2,3-b]pyridine N-oxide (1) are presented. Regioselective fluorination was achieved using either the Balz-Schiemann reaction or lithium-halogen exchange. [reaction: see text]     

Pyrolysis of a tubular aromatic compound

[reaction: see text] In the attempt to close the walls of a small tubular system that is a substructure of a [4,4] armchair nanotube a very unusual rearrangement reaction was observed.     

Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002