Theoretical study of light-metal tetrahydroaluminates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroaluminates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the molecular characteristics have been analyzed in various related series of these compounds. The results are compared with the data on analogous light-metal tetrahydroborates calculated at the same levels of theory. The differences in structure and stability between analogous hydroborate and alanate complexes are examined. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** has been shown to adequately reproduce the results obtained at the higher level of theory CCSD(T)/6-311++G**//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

吡啶-BH~3相互作用复合物的理论研究

对吡啶-BH~3复合物分别用MP2/6-31+G^*和B3LYP/6-31+G^*进行理论计算以预测该复合物的构型及解离能，得到四种构型，在MP2优化构型基础上作CCSD/6-31+G^*单点能量计算以验证MP2与B3LYP结果的可靠性，然后用B3LYP作振动频率分析，计算了各构型的垂直电离势，最后用更大基组作单点能量计算和自然键轨道(NBO)分析。结果表明，N-B直接相连的构型最稳定，其解离能为141.50kJ/mol,MP2和B3LYP对N-H接近的构型结果相关较大，另外两种构型稳定性介于二者之间，解离能分别为15.18kJ/mol,14.06kJ/mol(MP2/6-31+G^*)。     

Theoretical study of light-metal tetrahydroborates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroborates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the structural parameters, the energies of different decomposition pathways, barriers to internal rotation of BH₄ groups, normal mode frequencies, magnetic shielding constants, and spin density distribution (in radicals) have been analyzed in various related series of these compounds. The results obtained by ab initio methods and at the DFT level are compared. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** adequately reproduces the results obtained at the higher level of theory CCSD(T)/6-311++G*s*//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

Structural studies on ethyl isovalerate by microwave spectroscopy and quantum chemical calculations

We observed the microwave spectrum of ethyl isovalerate by molecular beam Fourier transform microwave spectroscopy. The rotational and centrifugal distortion constants of the most abundant conformer were determined. Its structure was investigated by comparison of the experimental rotational constants with those obtained by ab initio methods. In a first step, the rotational constants of various conformers were calculated at the MP2/6-311++G** level of theory. Surprisingly, no agreement with the experimental results was found. Therefore, we concluded that in the case of ethyl isovalerate more advanced quantum chemical methods are required to obtain a reliable molecular geometry. Ab initio calculations carried out at MP3/6-311++G**, MP4/6-311++G**, and CCSD/6-311++G** levels and also density functional theory calculations using the B3LYP/6-311++G** method gave similar results for the rotational constants, but they were clearly distinct from those obtained at the MP2/6-311++G** level. With use of these more advanced methods, the rotational constants of the lowest energy conformer were in good agreement with those obtained from the microwave spectrum.     

Ab initio studies of aspartic acid conformers in gas phase and in solution

Systematic and extensive conformational searches of aspartic acid in gas phase and in solution have been performed. For the gaseous aspartic acid, a total of 1296 trial canonical structures and 216 trial zwitterionic structures were generated by allowing for all combinations of internal single-bond rotamers. All the trial structures were optimized at the B3LYP/6-311G* level and then subjected to further optimization at the B3LYP/6-311++G** level. A total of 139 canonical conformers were found, but no stable zwitterionic structure was found. The rotational constants, dipole moments, zero-point vibrational energies, harmonic frequencies, and vertical ionization energies of the canonical conformers were determined. Single-point energies were also calculated at the MP2/6-311++G** and CCSD/6-311++G** levels. The equilibrium distributions of the gaseous conformers at various temperatures were calculated. The proton affinity and gas phase basicity were calculated and the results are in excellent agreement with the experiments. The conformations in the solution were studied with different solvation models. The 216 trial zwitterionic structures were first optimized at the B3LYP/6-311G* level using the Onsager self-consistent reaction field model (SCRF) and then optimized at the B3LYP/6-311++G** level using the conductorlike polarized continuum model (CPCM) SCRF theory. A total of 22 zwitterions conformers were found. The gaseous canonical conformers were combined with the CPCM model and optimized at the B3LYP/6-311++G** level. The solvated zwitterionic and canonical structures were further examined by the discrete/SCRF model with one and two water molecules. The incremental solvation of the canonical and zwitterionic structures with up to six water molecules in gas phase was systematically examined. The studies show that combining aspartic acid with at least six water molecules in the gas phase or two water molecules and a SCRF solution model is required to provide qualitatively correct results in the solution.     

Thermochemical properties of molecules and cations of MgNnHm (n=1,2 and m=1–6): enthalpies of formation, proton affinities and ionization energies

Ab initio molecular orbital calculations are reported for small neutral molecules and cations containing magnesium, nitrogen and hydrogen. Structures have been optimized using gradient techniques at B3LYP/6-31+G(d) and at MP2(full)/6-311++G(d,p). Single-point calculations are reported at QCISD(T)(full)/6-311++G(2df,p) and at CCSD(T)(full)/6-311++G(2df,p) levels using geometries optimized at MP2(full)/6-311++G(d,p). Standard enthalpies of formation at 298 K have been calculated at these two higher levels of theory. Other thermochemical properties calculated include ionization energies and proton affinities. The binding enthalpies of ammonia to Mg⁺, MgNH₂⁺ and MgNH₃⁺ are also reported.     

A coupled-cluster study of the structure and vibrational spectra of pyrazole and imidazole

Harmonic force fields were calculated at the corresponding optimized geometries for pyrazole and imidazole at the HF, B3LYP, MP2, CCSD and CCSD(T) levels using the 6-31G* basis set and at the HF and B3LYP levels using the cc-pVTZ basis set. The agreement between the calculated and experimental geometries by the CCSD and CCSD(T) methods was generally similar to that obtained with the B3LYP and MP2 methods. The force fields were scaled using one-scale-factor (1SF), 3SF and 7SF scaling schemes. The scale factors were varied with respect to the experimental frequencies. Using 7SF scaling, the root-mean-square (RMS) deviation of the calculated frequencies from the experimental frequencies by the HF, B3LYP, MP2, CCSD and CCSD(T) methods and the 6-31G* basis set was 16, 7, 13, 11 and 11 cm(-1), respectively. This shows that the B3LYP method is preferred for force field calculations over the perturbative MP2, CCSD and CCSD(T) methods. Using 1SF scaling, the CCSD(T) scale factor was 0.931, the highest among the five methods used but close to that obtained with the B3LYP method and the cc-pVTZ basis set with lower RMS deviation.     

Structure of the boronic acid dimer and the relative stabilities of its conformers

Despite the widespread use of boronic acids in materials science and as pharmaceutical agents, many aspects of their structure and reactivity are not well understood. In this research the boronic acid dimer, [HB(OH)(2)](2), was studied by second-order M?ller-Plesset (MP2) perturbation theory and coupled cluster methodology with single and double excitations (CCSD). Pople split-valence 6-31+G*, 6-311G**, and 6-311++G** and Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the calculations. A doubly hydrogen-bonded conformer (1) of the dimer was consistently found to be lowest in energy; the structure of 1 was planar (C(2h)) at most computational levels employed but was significantly nonplanar (C(2)) at the MP2/6-311++G** and CCSD/6-311++G** levels, the result of an intrinsic problem with Pople-type sp-diffuse basis functions on heavy atoms. The dimerization energy, enthalpy, and free energy for the formation of (1) from the exo-endo conformer of the monomer were -10.8, -9.2, and +1.2 kcal/mol, respectively, at the MP2/aug-cc-pVTZ level. Several other hydrogen-bonded conformers of the dimer were local minima on the potential energy surface (PES) and ranged from 2 to 5 kcal/mol higher in energy than 1. Nine doubly OH-bridged conformers, in which the boron atoms were tetracoordinated, were also local minima on the PES, but they were all greater than 13 kcal/mol higher in energy than 1; doubly H-bridged structures proved to be transition states. MP2 and CCSD results were compared to those from the BLYP, B3LYP, OLYP, O3LYP, PBE1PBE, and TPSS functionals with the 6-311++G** and aug-cc-pVTZ basis sets; the PBE1PBE functional performed best relative to the MP2 and CCSD results. Self-consistent reaction field (SCRF) calculations predict that boronic acid dimerization is less favorable in solution than in vacuo.     

Diketoacid HIV-1 integrase inhibitors: An ab initio study

The stable tautomeric forms of two representative arene-substituted diketoacid HIV-1 integrase inhibitors, 5-ClTEP and L-731,988, were investigated by B3LYP with 6-31G*, 6-31G(d,p), and 6-31+G(d,p) basis sets. Optimization with MP2/6-31G* was also performed for 5-ClTEP. The solvation effect was considered using a conductor-like screening model. With the density functional theory method, the trans diketo conformations are more stable than the cis conformers. The difference is 14 kJ mol(-1) for 5-ClTEP and 33 kJ mol(-1) for L-731,988. Two trans diketo structures were obtained. The difference between these two trans diketo structures is less than 4 kJ mol(-1) calculated at the B3LYP/6-311+G(3df,2p) level. Two enol forms prevail over the diketo tautomers and are calculated to have the same free energy. Because there is no barrier observed between these two enol forms, they can interchange easily such that a delocalized transition state is suggested to be the observed form. Contradictory to the results of the MP2 method that predicts a preference for the trans diketo forms, the B3LYP method predicts a preference for the enol tautomers, which is in agreement with the experimental results.     

An exploration of conformational search of leucine molecule and their vibrational spectra in gas phase using ab initio methods

An extensive exploration of the conformational space has been carried out to characterize all possible gas phase structures of leucine. A total of 324 unique trial structures for canonical leucine were generated by considering all possible combinations of single bond rotamers. All trial structures were optimized at the B3LYP/6-311G* level of the DFT method. A total of 77 unique and stationary canonical conformers were found. Further, 15 most stable conformers were reoptimized at B3LYP/6-311++G** level and their respective relative energies, vertical ionization energies, hydrogen bonding patterns, rotational constants and dipole moments were calculated. A single point energy calculations for leucine conformers have also been done at both B3LYP/6-311++G(2df, p) and MP2/6-311++G(2df, p) levels. The good agreement between our estimates of rotational constants for two most stable conformers and available experimental measurements supports the reliability of the B3LYP/6-311++G** level of theory for describing the conformational behavior of leucine molecule. The proton affinity and gas phase basicity were also determined. Using the statistical approach, conformational distributions at various temperatures have also been performed and analyzed. Vibrational spectra were also calculated. It is also observed that zwitterions of leucine are not stable in gas phase.     

Protonated acetylene revisited

The potential energy surface for protonated acetylene has been re-examined with large basis sets and highly correlated methods. The energy difference of 3.6–3.8 kcal/mol between the classical structure and non-classical (bridged) structure computed with CCSD (T)/cc-pVQZ, CCSD(T)/6-311+G(3df,2pd), BD(T)/cc- pVQZ, BD(T)/6-311+G(3df,2pd) and CBS-APNO methods is in very good agreement with the best previous calculations, 3.7–4.0 kcal/mol. In contrast, BLYP, B3LYP, PW91, PBE and TPSS density functional methods do rather poorly, yielding −0.52. 0.29, 1.81, 2.16 and 0.62 kcal/mol, respectively, with the 6-311+G(3df,2pd) basis. MP2 calculations predict the classical structure to be a transition state; however, frequency calculations at the CCSD/6-311+G(3df,2pd) level of theory show that the classical structure is a local minimum. CCSD(T), BD(T) and CBS-APNO energy calculations along the MP2/6-311+G(3df,2pd) reaction path indicate that the classical structure is a shallow local minimum separated from the non-classical structure by a very small barrier of 0.11–0.13 kcal/mol. Because the barrier for proton exchange between the non-classical isomers via the classical structure is broad and nearly flat at the top, the tunneling splitting should be reduced, possibly accounting for the 15% difference between the calculated and experimental barrier heights. Contribution to the Fernando Bernardi Memorial Issue.     

Structure and conformational stability of CH2CHCH2X (X=F, Cl and Br) molecules—post Hartree–Fock and density functional theory methods

The molecular structure and conformational stability of CH₂CHCH₂X (X=F, Cl and Br) molecules were studied using ab initio and density functional theory (DFT) methods. The molecular geometries of 3-fluoropropene were optimized employing BLYP and B3LYP levels of theory of DFT method implementing 6-311+G(d,p) basis set. The MP2/6-31G^*, BLYP and B3LYP levels of theory of ab initio and DFT methods were used to optimize the 3-chloropropene and 3-bromopropene molecules. The structural and physical parameters of the molecules are discussed with the available experimental values. The rotational potential energy surface of the above molecules were obtained at MP2/6-31G^* and B3LYP/6-311+G(d,p) levels of theory. The Fourier decomposition of the rotational potentials were analyzed. The HF/6-31G^* and MP2/6-31G^* levels of theory have predicted the cis conformer as the minimum energy structure for 3-fluoropropene, which is in agreement with the experimental values, whereas the BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory reverses the order of conformation. The ΔE values calculated for 3-chloropropene at MP2/6-31G^*, BLYP/6-311+G(d,p) and B3LYP/6-311+G(d,p) levels of theory show that the gauche form is more stable than the cis form, which is in agreement with the experimental value. The same levels of theory have also predicted that the gauche form is stable than cis for 3-bromopropene molecule. The maximum hardness principle has been able to predict the stable conformer of 3-fluoropropene at HF/6-31G^* level of theory, but the same level of theory reverses the conformational stability of 3-chloropropene and 3-bromopropene molecules and MP2/6-31G^* level of theory predicted the stable conformer correctly.     

Kinetics of the multichannel reaction of methanethiyl radical (CH3S*) with 3O2

The CH3S* + O2 reaction system is considered an important process in atmospheric chemistry and in combustion as a pathway for the exothermic conversion of methane-thiyl radical, CH3S*. Several density functional and ab initio computational methods are used in this study to determine thermochemical parameters, reaction paths, and kinetic barriers in the CH3S* + O2 reaction system. The data are also used to evaluate feasibility of the DFT methods for higher molecular weight oxy-sulfur hydrocarbons, where sulfur presents added complexity from its many valence states. The methods include: B3LYP/6-311++G(d,p), B3LYP/6-311++G(3df,2p), CCSD(T)/6-311G(d,p)//MP2/6-31G(d,p), B3P86/6-311G(2d,2p)//B3P86/6-31G(d), B3PW91/6-311++G(3df,2p), G3MP2, and CBS-QB3. The well depth for the CH3S* + 3O2 reaction to the syn-CH3SOO* adduct is found to be 9.7 kcal/mol. Low barrier exit channels from the syn-CH3SOO* adduct include: CH2S + HO2, (TS6, E(a) is 12.5 kcal/mol), CH3 + SO2 via CH3SO2 (TS2', E(a) is 17.8) and CH3SO + O (TS17, E(a) is 24.7) where the activation energy is relative to the syn-CH3SOO* stabilized adduct. The transition state (TS5) for formation of the CH3SOO adduct from CH3S* + O2 and the reverse dissociation of CH3SOO to CH3S* + O2 is relatively tight compared to typical association and simple bond dissociation reactions; this is a result of the very weak interaction. Reverse reaction is the dominant dissociation path due to enthalpy and entropy considerations. The rate constants from the chemical activation reaction and from the stabilized adduct to these products are estimated as functions of temperature and pressure. Our forward rate constant and CH3S loss profile are in agreement with the experiments under similar conditions. Of the methods above, the G3MP2 and CBS-QB3 composite methods are recommended for thermochemical determinations on these carbon-sulfur-oxygen systems, when they are feasible.     

Comparison of levels of electronic structure theory in direct dynamics simulations of C2H5F --> HF + C2H4 product energy partitioning

Direct dynamics simulations at the MP2/6-311++G** level of theory were performed to study C(2)H(5)F --> HF + C(2)H(4) product energy partitioning. The simulation results are compared with experiment and a previous MP2/6-31G* simulation. The current simulation with the larger basis set releases more energy to HF vibration and less to HF + C(2)H(4) relative translation as compared to the previous simulation with the 6-31G* basis set. The HF rotation and vibration energy distributions determined from the current simulation are in overall very good agreement with previous experimental studies of C(2)H(5)F dissociation by chemical activation and IRMPA. A comparison of the simulations with experiments suggests there may be important mass effects for energy partitioning in HX elimination from haloalkanes. The transition state (TS) structures and energies calculated with MP2 and the 6-31G* and 6-311++G** basis sets are compared with those calculated using CCD, CCSD, CCSD(T), and the 6-311++G** basis set.     

Peptide models. XXXIII. Extrapolation of low-level Hartree-Fock data of peptide conformation to large basis set SCF,MP2, DFT,and CCSD(T) results. The Ramachandran surface of alanine dipeptide computed at various levels of theory

At the dawn of the new millenium, new concepts are required for a more profound understanding of protein structures. Together with NMR and X-ray-based 3D-structure determinations in silico methods are now widely accepted. Homology-based modeling studies, molecular dynamics methods, and quantum mechanical approaches are more commonly used. Despite the steady and exponential increase in computational power, high level ab initio methods will not be in common use for studying the structure and dynamics of large peptides and proteins in the near future. We are presenting here a novel approach, in which low- and medium-level ab initio energy results are scaled, thus extrapolating to a higher level of information. This scaling is of special significance, because we observed previously on molecular properties such as energy, chemical shielding data, etc., determined at a higher theoretical level, do correlate better with experimental data, than those originating from lower theoretical treatments. The Ramachandran surface of an alanine dipeptide now determined at six different levels of theory [RHF and B3LYP 3-21G, 6-31+G(d) and 6-311++G(d,p)] serves as a suitable test. Minima, first-order critical points and partially optimized structures, determined at different levels of theory (SCF, DFT), were completed with high level energy calculations such as MP2, MP4D, and CCSD(T). For the first time three different CCSD(T) sets of energies were determined for all stable B3LYP/6-311++G(d,p) minima of an alanine dipeptide. From the simplest ab initio data (e.g., RHF/3-21G) to more complex results [CCSD(T)/6-311+G(d,p)//B3LYP/6-311++G(d,p)] all data sets were compared, analyzed in a comprehensive manner, and evaluated by means of statistics.     

丁烯和丁烷自由基阳离子的分子结构和超精细结构的 理论研究

用密度函数理论B3LYP方法和6-31G(d,p),6-311G(d,p)及6-311+G(d,p)基组，分别对1-C4H^+~8,2-C4H^+~8和C4H^+~10进行了构型优化和频率分析计算，预言1-C4H^+~8具有非平面构型，与以往报道的从头算和密度函数理论计算结果不同。在各自由基阳离子的B3LYP构型上，进行了B3LYP、MP2及MRSDCI方法的超精细偶合常数计算，得到了比以往更好的结果，特别是MP2/B3LYP计算值是至今与实验值符合得最好的理论计算结果。     

A theoretical study on the origin of pi-facial stereoselectivity in the alkylation of enolates derived from 4-substituted gamma-butyrolactones

The alkylation of 4-methoxymethyl-gamma-butyrolactone enolate with methyl chloride was studied at the B3LYP/6-31+G* level. Conformer search of the free enolate gave 15 unique conformers within 5.39 kcal/mol. The transition structures for both anti- and syn-attacks of methyl chloride on these 15 conformers were located. In all cases, the anti-transition structures are more stable than the corresponding syn-ones. The alkylation of gamma-valerolactone was studied at the MP2, B3LYP, and HF levels of theory with the 6-31+G* basis set in the presence of Li+ and dimethyl ether molecules. Basis set effects were also examined by the comparison of the MP2 results with the 6-31+G*, 6-31+G**, and 6-311+G** basis sets in one case. This study shows that the main source of the anti-selectivity of 4-substituted gamma-butyrolactones is eclipsing strain in the syn-transition structures.     

Intramolecular hydrogen bond in the push–pull CF3-aminoenones: DFT and FTIR study,NBO analysis

Postulated conformers of trifluoromethylated β-aminoenones stabilized by intramolecular NH?O and N?HO bonds were studied by IR and NMR spectroscopy and evaluated with quantum chemical calculations (B3LYP/6-311+G(d,p), MP2/6-311+G(d,p)//B3LYP/6-311+G(d,p) and MP2/6-31G(d,p)) and NBO analysis. The influence of the nature of EWG, substituents at the nitrogen atom and double bond, and of orbital interactions of heteroatoms and double bonds in these structures on the proton affinity of basic and acid centers, strength of hydrogen bonds, and the energy of tautomeric transfers is discussed. The theoretical results agree satisfactorily with the experimental observations.     

COS与O2反应的密度泛函理论研究

用量子化学密度泛函理论（DFT）方法，对COS与O2的反应进行了理论研究．在UB3LYP／6—31G^＊，UB3LYP／6—311＋＋G^＊＊水平上，优化了反应势能面上各驻点（反应物、产物、中间体和过渡态）的几何构型，在UB3LYP／6—31G^＊水平上通过内禀反应坐标（IRC）计算和振动分析，对过渡态进行了确认．在CCSD（T）／6—311＋＋G（2d，2p）水平上进行了单点能量计算，并确定了反应机理．研究结果表明，反应主要产物为CO2和SO.     

A new scheme for determining the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies of glycine and alanine peptides

In this paper a new scheme was proposed to calculate the intramolecular hydrogen-bonding energies in peptides and was applied to calculate the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies of the glycine and alanine peptides. The density-functional theory B3LYP6-31G(d) and B3LYP6-311G(d,p) methods and the second-order Moller-Plesset perturbation theory MP26-31G(d) method were used to calculate the optimal geometries and frequencies of glycine and alanine peptides and related structures. MP26-311++G(d,p), MP26-311++G(3df,2p), and MP2/aug-cc-pVTZ methods were then used to evaluate the single-point energies. It was found that the B3LYP6-31G(d), MP26-31G(d), and B3LYP6-311G(d,p) methods yield almost similar structural parameters for the conformers of the glycine and alanine dipeptides. MP2/aug-cc-pVTZ predicts that the intramolecular seven-membered ring N-H...O=C hydrogen-bonding strength has a value of 5.54 kcal/mol in glycine dipeptide and 5.73 and 5.19 kcal/mol in alanine dipeptides, while the steric repulsive interactions of the seven-membered ring conformers are 4.13 kcal/mol in glycine dipeptide and 6.62 and 3.71 kcal/mol in alanine dipeptides. It was also found that MP26-311++G(3df,2p) gives as accurate intramolecular N-H...O=C hydrogen-bonding energies and steric repulsive interactions as the much more costly MP2/aug-cc-pVTZ does.