Platinum-catalyzed synthesis of water-soluble gold-platinum nanoparticles

The ability to control composition and size in the synthesis of bimetallic nanoparticles is important for the exploitation of the bimetallic catalytic properties. This paper reports findings of an investigation of a new approach to the synthesis of gold-platinum (AuPt) bimetallic nanoparticles in aqueous solution via one-phase reduction of AuCl(4-) and PtCl(4)(2-) using a combination of reducing and capping agents. Hydrogen served as a reducing agent for the reduction of Pt(II), whereas acrylate was used as a reducing agent for the reduction of Au(III). The latter reaction was found to be catalyzed by the formation of Pt as a result of the reduction of Pt(II). Acrylate also functioned as capping agent on the resulting nanocrystals. By controlling the feed ratios of AuCl(4-) and PtCl(4)(2-) and the relative concentrations of acrylate, an effective route for the preparation of AuPt nanoparticles with bimetallic compositions ranging from approximately 4 to 90% Au and particle sizes ranging from 2 to 8 nm has been demonstrated. The composition, size, and shell properties were characterized using transmission electron microscopy, direct current plasma-atomic emission spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. Implications of the results to the exploration of bifunctional catalysts are also briefly discussed.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.     

Ion-exchange properties of imidazolium-grafted SBA-15 toward AuCl4(-) anions and their conversion into supported gold nanoparticles

Imidazolium groups were successfully prepared and grafted on the surface of SBA-15 mesoporous silica. The ion-exchange properties of the functionalized porous solid (SBA-15/R(+)Cl(-)) toward AuCl(4)(-) anions were evaluated through an ion-exchange isotherm. The calculated values of the equilibrium constant (log β = 4.47) and the effective ion-exchange capacity (t(Q) = 0.79 mmol g(-1)) indicate that the AuCl(4)(-) species can be loaded and strongly retained on the functionalized surface as counterions of the imidazolium groups. Subsequently, solids containing different amounts of AuCl(4)(-) ions were submitted to a chemical reduction process with NaBH(4), converting the anionic gold species into supported gold nanoparticles. The plasmon resonance bands, the X-ray diffraction patterns, and transmission electron microscopy images of the supported gold nanoparticles before and after thermal treatment at 973 K indicate that the metal nanostructures are highly dispersed and stabilized by the host environment.     

Keggin ions as UV-switchable reducing agents in the synthesis of Au core-Ag shell nanoparticles

Keggin ion-mediated synthesis of Au core-Ag shell bimetallic nanoparticles is described. Exposure of photochemically reduced aqueous (PW12O40)3- Keggin ions to AuCl4- ions leads to the formation of stable gold nanoparticles capped by the Keggin ions. The surface-bound Keggin ions may then be activated by UV irradiation and, upon exposure to Ag+ ions, reduce the metal ions to form a silver shell around the gold core. That the capping agent not only stabilizes the metal nanoparticles but also plays the role of a switchable reducing agent is a highlight of this approach with important implications in nanomaterials synthesis and catalysis.     

Kinetics of hydrogen production upon reduction of aqueous TiO2 nanoparticles catalyzed by Pd(0), Pt(0), or Au(0) coatings and an unusual hydrogen abstraction; steady state and pulse radiolysis study

Reduction of H(+) by TiO(2) electrons (e(TiO)(2)(-)) in aqueous colloidal solution takes place in the presence of surface metal catalysts. The catalytic reduction gives rise to adsorbed hydrogen atoms. In the presence of Pd(0) or Pt(0), material balance shows that most of the adsorbed H atoms combine to molecular hydrogen. When the TiO(2) nanoparticles are partially coated with Au(0) instead of Pd(0) or Pt(0), a higher than expected molecular hydrogen level is observed, attributed to a short chain reaction involving hydrogen abstraction from 2-propanol. This unusual hydrogen abstraction reaction has not been reported before. The mechanism and energy balance are discussed. The surface modification of TiO(2) nanoparticles was carried out by reduction of K(2)PdCl(4), H(2)PtCl(6), or HAuCl(4) with e(TiO)(2)(-). The latter had been generated through electron injection from hydrated electrons, hydrogen atoms, or 2-propanol radicals, produced by gamma or pulse radiolysis prior to the addition of the metal compounds. Upon addition of the metal compounds, immediate reactions take place producing metals clusters (M(0)) by multistep reductions reactions on the TiO(2) surface. The chemical kinetics involving the different metals and the reaction rate constant of e(aq)(-) and e(TiO)(2)(-) with AuCl(4)(-) is also reported.     

Deposition of continuous platinum shells on gold nanoparticles by chemical precipitation

Continuous platinum shells consisting of ~5 atomic layers were deposited onto preformed gold seeds in aqueous medium by reducing hexachloroplatinic acid with ascorbic acid. By controlling the reduction kinetics of Pt(IV) species and the properties of the substrate, it was possible to ensure a slow and controlled deposition of platinum atoms onto the gold cores. Electrochemical evaluations revealed the presence of a compact platinum shell. The mass specific oxygen reduction activity of platinum in the AuPt core-shell nanoparticles was found to be four times higher than that of platinum black and comparable to that of polycrystalline bulk metal.     

Green synthesis of well-dispersed gold nanoparticles using Macrotyloma uniflorum

The synthesis of metal nanoparticles of different sizes, shapes, chemical composition and controlled monodispersity is an important area of research in nanotechnology because of their interesting physical properties and technological applications. Present work describes an eco-friendly method for the synthesis of spherical gold nanoparticles using aqueous extract of Macrotyloma uniflorum. The effects of quantity of extract, temperature and pH on the formation of nanoparticles are studied. The nanoparticles are characterized by UV-visible spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and FTIR analysis. The high crystallinity of nanoparticles with fcc phase is evident from HRTEM images, SAED and XRD patterns. Synthesized nanoparticles have size in the range 14-17nm. FTIR spectrum indicates the presence of different functional groups present in the bio-molecule capping the nanoparticles. The possible mechanism leading to the formation of gold nanoparticles is suggested.     

Mechanism of gold metal ion reduction, nanoparticle growth and size control in aqueous amphiphilic block copolymer solutions at ambient conditions

Spontaneous formation and efficient stabilization of gold nanoparticles with an average diameter of 7 approximately 20 nm from hydrogen tetrachloroaureate(III) hydrate (HAuCl4.3H2O) were achieved in air-saturated aqueous poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer solutions at ambient temperature in the absence of any other reducing agent. The particle formation mechanism is considered here on the basis of the block copolymer concentration dependence of absorption spectra, the time dependence (kinetics) of AuCl4- reduction, and the block copolymer concentration dependence of particle size. The effects of block copolymer characteristics such as molecular weight (MW), PEO block length, PPO block length, and critical micelle concentration (cmc) are explored by examining several PEO-PPO-PEO block copolymers. Our observations suggest that the formation of gold nanoparticles from AuCl4- comprises three main steps: (1) reduction of metal ions by block copolymer in solution, (2) absorption of block copolymer on gold clusters and reduction of metal ions on the surface of these gold clusters, and (3) growth of metal particles stabilized by block copolymers. While both PEO and PPO blocks contribute to the AuCl4- reduction (step 1), the PEO contribution appears to be dominant. In step 2, the adsorption of block copolymers on the surface of gold clusters takes place because of the amphiphilic character of the block copolymer (hydrophobicity of PPO). The much higher efficiency of particle formation attained in the PEO-PPO-PEO block copolymer systems as compared to PEO homopolymer systems can be attributed to the adsorption and growth processes (steps 2 and 3) facilitated by the block copolymers. The size of the gold nanoparticles produced is dictated by the above mechanism; the size increases with increasing reaction activity induced by the block copolymer overall molecular weight and is limited by adsorption due to the amphiphilic character of the block copolymers.     

Formation process of two-dimensional networked gold nanowires by citrate reduction of AuCl4- and the shape stabilization

Gold nanowires with a two-dimensional (2-D) network structure were formed by citrate reduction of AuCl4- with a low concentration of citrate. The structure change during the growth processes was observed by transmission electron microscopy (TEM) and the variation in concentrations of gold species in the aqueous solution was monitored by UV-vis spectra and Inductively Coupled Argon Plasma Emission Spectrophotometer (ICAP). The formation of 2-D gold nanowires was induced by the small amount of reducing agent because the preliminary gold nanoparticles formed by reduction of AuCl4- were thermodynamically unstable in the aqueous solution due to the insufficient capping of citrate. One of the key points of nanowire formation is the preferential adsorption of AuCl4- instead of citrate ions on the surface of the preliminary gold particles, which results in an attracting force between gold nanoparticles. We propose a hit-to-stick-to-fusion model, in which gold nanoparticles adhere by the attraction force and stick together, causing selective deposition of reduced gold metallic species on the concave surface of the two sticking particles, followed by fusion into nanowires. Nanowires then connect with each other, forming a network structure. The evidence obtained from TEM observation of transformation from gold nanowires on a TEM grid to large nanoparticles by hydrogen gas reduction and time-resolved measurements of gold ions suggest that gold ions not only are crucial for the growth of gold nanowires but also play an important role in stabilizing the shape of gold nanowires during the formation process. This method for synthesizing 2-D gold nanowires is simple and relatively easy application to the synthesis of other metallic nanowires such as silver or platinum is expected.     

Morphology of gold nanoparticles synthesized by filamentous cyanobacteria from gold(I)-thiosulfate and gold(III)--chloride complexes

Plectonema boryanum UTEX 485, a filamentous cyanobacterium, has been reacted with aqueous Au(S(2)O(3))(2)(3)(-) and AuCl(4)(-) solutions ( approximately 400-550 mg/L Au) at 25-100 degrees C for up to 1 month and at 200 degrees C for 1 day. The interaction of cyanobacteria with aqueous Au(S(2)O(3))(2)(3)(-) promoted the precipitation of cubic (100) gold nanoparticles (<10-25 nm) at membrane vesicles and admixed with gold sulfide within cells and encrusted on the cyanobacteria, whereas reaction with AuCl(4)(-) resulted in the precipitation of octahedral (111) gold platelets ( approximately 1-10 microm) in solutions and nanoparticles of gold (<10 nm) within bacterial cells. Functional groups imaged by negative ion TOF-SIMS on (111) faces of the octahedral platelets were predominantly Cl and CN, with smaller amounts of C(2)H and CNO.     

Electrochemical synthesis of gold nanocrystals and their 1D and 2D organization

Size-controlled gold nanocrystals were conveniently synthesized through direct electroreduction of bulk AuCl(4)(-) ions in the presence of poly(N-vinylpyrrolidone) (PVP). PVP greatly enhanced the gold particle formation process and also significantly retarded the gold electrodeposition process, allowing the electrochemical synthesis of gold nanocrystals to be carried out in the form of simple electroreduction. This novel electrochemical method may be extended to synthesis of other noble metal nanoparticles with controllable size on a large scale. The PVPK90-protected gold nanocrystals spontaneously self-assembled into nearly ordered 2D close-packed arrays and interesting 1D nanostructures. The aggregation of unstable PVPK17-protected gold nanocrystals resulted in the formation of ultrathin single-crystalline films. PVP plays multifunctional roles in controlling the size and shape of gold nanocrystals and in inducing individual gold nanocrystals to construct 1D nanostructures. The nanoparticle self-assembling technique based on PVP offers a simple, but effective, path to organize individual gold nanoparticles into various 1D and 2D nanostructured materials.     

Spontaneous formation of gold nanoparticles in poly(ethylene oxide)-poly(propylene oxide) solutions: solvent quality and polymer structure effects

We report here on the effects that the solution properties of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers have on the reduction of hydrogen tetrachloroaurate(III) hydrate (HAuCl4.3H2O) and the size of gold nanoparticles produced. The amphiphilic block copolymer solution properties were modulated by varying the temperature and solvent quality (water, formamide, and their mixtures). We identified two main factors, (i) block copolymer conformation or structure (e.g., loops vs entanglements, nonassociated polymers vs micelles) and (ii) interactions between AuCl4- ions and block copolymers (attractive ion-dipole interactions vs repulsive interactions due to hydrophobicity), to be important for controlling the competition between the reactivities of AuCl4- reduction in the bulk solution to form gold seeds and on the surface of gold seeds (particles) and the particle size determination. The particle size increase observed with increased temperature in aqueous solutions is attributed to enhanced hydrophobicity of the block copolymer, which favors AuCl4- reduction on the surface of seeds. The lower reactivity and higher particle sizes observed in formamide solutions are attributed to the shielding of ion-dipole interaction between AuCl4- ions and block copolymers by formamide, which overcomes the beneficial effects of formamide on the block copolymer conformation (lower micelle concentration).     

Preparation and characterization of metal-chitosan nanocomposites

Various metal-chitosan nanocomposites were synthesized, including silver (Ag), gold (Au), platinum (Pt), and palladium (Pd) in aqueous solutions. Metal nanoparticles were formed by reduction of corresponding metal salts with NaBH4 in the presence of chitosan. And chitosan molecules adsorbing onto the surface of as-prepared metal nanoparticles formed the corresponding metal-chitosan nanocomposites. Transmission electron microscopy (TEM) images and UV-vis spectra of the nanocomposites revealed the presence of metal nanoparticles. Comparison of all the resulting particles size, it shows that silver nanoparticles are much larger than others (Au, Pt and Pd). In addition, the difference in particles size leads to develop different morphologies in the films cast from prepared metal-chitosan nanocomposites. Polarized optical microscopy (POM) images show a batonet-like structure for Ag-chitosan nanocomposites film, while for the films cast from other metal (Au, Pt, and Pd)-chitosan nanocomposites, some branched-like structures with a few differences among them were observed under POM observation.     

Design of oxide nanoparticles by aqueous chemistry

The elaboration of nanoparticles designed for technological applications in various fields such as catalysis, optics, magnetism, electronics… needs the strict control of their characteristics, especially chemical composition, crystalline structure, size, and shape. These characteristics bring the physical properties (color, magnetism, band gap…) of the material, and also the surface to volume ratio of particles which is of high importance when they are used as a chemically active or reactive support, in catalysis for instance. The nanoparticles may have also to be surface functionalized by various species, and/or dispersed in aqueous or non aqueous media. We will show that the aqueous chemistry of metal cations is a very versatile and attractive way for the design of oxide nanomaterials, allowing the control of size, shape, and crystalline structure for polymorphic materials. Aqueous surface chemistry, including adsorption of various species, may be used to modify the morphology of nanoparticles. In some cases, redox processes can be involved to control the morphology of nanoparticles. Technologically important nanomaterials such as titania, alumina, and iron oxides are studied.     

Galvanic replacement reactions of active-metal nanoparticles

We present a systemic investigation of a galvanic replacement technique in which active-metal nanoparticles are used as sacrificial seeds. We found that different nanostructures can be controllably synthesized by varying the type of more noble-metal ions and liquid medium. Specifically, nano-heterostructures of noble metal (Ag, Au) or Cu nanocrystals on active-metal (Mg, Zn) cores were obtained by the reaction of active-metal nanoparticles with more noble-metal ions in ethanol; Ag nanocrystal arrays were produced by the reaction of active-metal nanoparticles with Ag(+) ions in water; spongy Au nanospheres were generated by the reaction of active-metal nanoparticles with AuCl(4)(-) ions in water; and SnO(2) nanoparticles were prepared when Sn(2+) were used as the oxidant ions. The key factors determining the product morphology are shown to be the reactivity of the liquid medium and the nature of the oxidant-reductant couple, whereas Mg and Zn nanoparticles played similar roles in achieving various nanostructures. When microsized Mg and Zn particles were used as seeds in similar reactions, the products were mainly noble-metal dendrites. The new approach proposed in this study expands the capability of the conventional nanoscale galvanic replacement method and provides new avenues to various structures, which are expected to have many potential applications in catalysis, optoelectronics, and biomedicine.     

Nucleation and aggregative growth process of platinum nanoparticles studied by in situ quick XAFS spectroscopy

The early stage in the nucleation and subsequent aggregative particle growth of the colloidal platinum (Pt) dispersions produced by photoreduction in an aqueous ethanol solution of poly(N-vinyl-2-pyrrolidone) (PVP) was quantitatively investigated by means of in situ quick XAFS (QXAFS) measurements. The stages of the reduction-nucleation and the association process (aggregative particle growth and Ostwald ripening) of Pt atoms to produce Pt nanoparticles was successfully discriminated in course of the photoreduction time. The present QXAFS analysis indicated that Pt nuclei (i.e., (Pt(0))(m) nucleates approximately m = 4) were continuously produced in the reduction-nucleation process at the early time, followed by the aggregative particle growth with the autocatalytic reduction of Pt ionic species on the surface of Pt nuclei to produce Pt nanoparticles. Subsequently the particle growth proceeded via Ostwald ripening, resulting in the production of larger Pt nanoparticles at a later time. It was also found that the aggregative particle growth follows a sigmoidal profile well described either by the solid-state kinetic model or by the chemical-mechanism-based kinetic model, specifically the Avrami-Erofe'ev or Finke-Watzky models. The difference in terms of the formation mechanism was observed between the reduction of Pt(IV)Cl(6)(2-) and Pt(II)Cl(4)(2-) as a source material. Also presented is that the addition of the photoactivator such as benzoin, benzophenone, and acetophenone in the system is very effective to enhance the rate for the formation of Pt nanoparticles.     

Self-organization of Gold Nanoparticles Protected by 9-(5-Thiopentyl)-carbazole

Introduction During the past decade, nanometer-sized metal clusters, special the gold clusters, possessing unusual physical and chemical properties have been extensively investigated1-5. In recent years, a new effort has been focused on fabricating ordered metal nanoparticles with well-defined two or three dimensions using nanometer-sized metal clusters as building blocks6-9. This will provide a new horizon to develop novel optical and nanoelectronic devices. Ordered nanoparticle assemblie…     

Facile synthesis of highly biocompatible poly(2-(methacryloyloxy)ethyl phosphorylcholine)-coated gold nanoparticles in aqueous solution

Diblock copolymers comprising a highly biocompatible poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) block and a poly(2-(dimethylamino)ethyl methacrylate) (PDMA) block were evaluated for the synthesis of sterically stabilized gold nanoparticles in aqueous solution. The PDMA block becomes partially protonated on addition of HAuCl4, and the remaining nonprotonated tertiary amine groups reduce the AuCl4- counterion to zerovalent gold in situ. This approach results in the adsorption of the PDMA block onto the gold nanoparticle surface while the PMPC chains serve as a stabilizing block, producing highly biocompatible gold sols in aqueous solution at ambient temperature without any external reducing agent. The size and shape of gold nanoparticles could be readily controlled by tuning synthesis parameters such as the block composition and the relative and absolute concentrations of the PMPC-PDMA diblock copolymer and HAuCl4. These highly biocompatible gold sols have potential biomedical applications.     

Preparation of silver nanoparticles with controlled particle size

Silver colloids show different colors due to light absorption and scattering in the visible region based on plasmon resonance. The resonance wavelength depends on particle size and shape. Here we report chemical reduction methods for preparation of silver nanoparticles exhibiting multicolor in aqueous solutions. Depending on chemical conditions the obtained nanoparticles are different regarding size and morphology.In order to investigate the relationship between size, stability and color of silver colloids we obtained silver nanoparticles in aqueous solutions using different reducing agents. The effect of polyvinyl pyrrolidone (PVP) and polyvinyl alcohol (PVA) on stabilization of obtained silver colloids was investigated. We have also studied the effect of silver precursor and its concentration on the formation of stable silver colloids.UV-VIS spectrum for silver colloids contains a strong plasmon band near 410 nm, which confirms silver ions reduction to Ag° in the aqueous phase. The formation of metal silver was also confirmed by powder X-ray diffraction (XRD) analysis. The diameter size of silver nanoparticles was in the range from 5 nm to 100 nm     

A facile synthesis and characterization of Ag, Au and Pt nanoparticles using a natural hydrocolloid gum kondagogu (Cochlospermum gossypium)

An environmentally benign method for the synthesis of noble metal nanoparticles has been reported using aqueous solution of gum kondagogu (Cochlospermum gossypium). Both the synthesis, as well as stabilization of colloidal Ag, Au and Pt nanoparticles has been accomplished in an aqueous medium containing gum kondagogu. The colloidal suspensions so obtained were found to be highly stable for prolonged period, without undergoing any oxidation. SEM-EDXA, UV-vis spectroscopy, XRD, FTIR and TEM techniques were used to characterize the Ag, Au and Pt nanoparticles. FTIR analysis indicates that -OH groups present in the gum matrix were responsible for the reduction of metal cations into nanoparticles. UV-vis studies showed a distinct surface plasmon resonance at 412 and 525 nm due to the formation of Au and Ag nanoparticles, respectively, within the gum network. XRD studies indicated that the nanoparticles were crystalline in nature with face centered cubic geometry. The noble metal nanoparticles prepared in the present study appears to be homogeneous with the particle size ranging between 2 and 10 nm, as evidenced by TEM analysis. The Ag and Au nanoparticles formed were in the average size range of 5.5±2.5 nm and 7.8±2.3 nm; while Pt nanoparticles were in the size range of 2.4±0.7 nm, which were considerably smaller than Ag and Au nanoparticles. The present approach exemplifies a totally green synthesis using the plant derived natural product (gum kondagogu) for the production of noble metal nanoparticles and the process can also be extended to the synthesis of other metal oxide nanoparticles.