Philosophical aspects of chemometrical strategy in Analytical Chemistry

Summary This paper discusses the philosophical aspects of the three main chemometrical strategies in analytical chemistry: statistical data treatment, optimization and modelling, pattern recognition. It is possible by a more general consideration of these approaches to find a proper place of different philosophical categories such as form and content, induction and deduction, concrete and general in analytical chemistry. The philosophical aspect of the considerations allows a deeper penetration into the theoretical basis of chemical analysis.

---

Philosophische Betrachtungen zu chemometrischen Strategien in der Analytischen Chemie

---

Presented at the First International Symposium on History and Philosophy in Analytical Chemistry, Vienna, November 22–23, 1985     

Determination of total,and bound Se in sera by INAA

In this study we report on the comparison between the total selenium in serum (total Se) with that which is apparently bound to high molecular weight (>12,000 D) species, presumably proteins (bound Se). Nine hundred seventy seven (977) serum samples arising out of a population-based epidemiological study were prepared in duplicate for the determination of total Se by pipeting directly into irradiation vials; and separate duplicate aliquots were dialyzed against DI water for the determination of bound Se. All samples were analyzed by neutron activation analysis via^77mSe (17.4 s). A small dialyzable Se component (6%) (free Se), defined as the difference between the total Se minus the bound Se, was identified.     

Tautomerism and stereochemistry of isohypericin,bromohypericines, and gymnochromes: Force field investigations

Summary Using an MM2 derived force field the stereochemistry and tautomerism of isohypericin and several bromohypericines, including gymnochrome D and isogymnochrome D, were investigated. The geometries of the propeller and double butterfly conformers of isohypericin were similar to those of hypericin. However, an interconversion barrier between the enantiomeric propeller conformers was found, which was 53 kJ/mol lower in isohypericin. From the ten tautomers of isohypericin the 7,14-dioxo tautomer was calculated to be the most stable one by about 50 kJ/mol. In the bromo derivatives and the gymnochromes the bromine substituents caused a ruffling of the biaryl fragments. The buttressing effect of the bromine led to an enhancement of the interconversion barriers between enantiomeric conformers. The double butterfly conformer was found to be more stable than the propeller conformer for tetrabromohypericin and the gymnochromes.

---

Tautomerie und Stereochemie von Isohypericin und Bromhypericinen: Untersuchungen mit Hilfe der Kraftfeld-Methodik

Zusammenfassung Die Stereochemie von Isohypericin und einiger Bromhypericine sowie von Gymnochrom D und Isogymnochrom D wurden mit Hilfe eines von MM2 abgeleiteten Kraftfeldes untersucht. Die Geometrien der Propeller- und Doppelschmetterlings-Konformeren sind vergleichbar mit jenen des Hypericins. Die Interkonversionsbarriere zwischen den enantiomeren Propeller-Konformeren ist jedoch um etwa 53 kJ/mol niederer als im Hypericin. Von den zehn Isohypericin-Tautomeren ist das 7,14-Dioxotautomere das um etwa 50kJ/mol stabilste. In den Bromderivaten und den Gymnochromen bewirken die Bromsubstituenten eine Wellung der Biarylfragmente, wobei der Buttressing-Effekt der Bromsubstituenten zu einer Erhöhung der Interkonversionsbarrieren zwischen enantiomeren Konformeren führt. Das Doppelschmetterlings-Konformere ist beim Tetrabromhypericin und bei den Gymnochromen stabiler als das Propeller-Konformere.

     

The time evolution of the pair distribution function of polymeric systems

Summary The stress tensor of a polymeric system, solution or melt, is the sum of single molecule terms which may be expressed as integrals involving the distribution function in the phase space of a single molecule and intermolecular terms which involve the distribution function in the configuration space of pairs of molecules. The evaluation of the single molecule terms is usually based on the solution of the diffusion equation in the configuration space of a single molecule. In the present development, an analogous diffusion equation in the configuration space of a pair of molecules is developed. The development is based on a generalization of the time-smoothing ideas introduced by Kirkwood. Expressions are obtained for the various friction coefficients as time correlation functions.     

Metallurgical factors determining the coercivity of ND-FE-B magnets

In Nd-Fe-B based permanent magnets a high magnetocrystalline anisotropy of the hardmagnetic phase is necessary for a high intrinsic coercivity. In fact, metallurgical parameters (distribution of phases, chemical composition and crystal structures of phases) and processing parameters (alloy preparation, size and shape of particles, sintering and annealing treatments) determine the value of the coercive force of each sintered Nd-Fe-B magnet. Our analytical electron microscope study shows that melt-spun and sintered Nd-Fe-B based magnets contain more or less a distribution of nucleation centres for reversed domains, such as iron-rich phases and-iron precipitates within the hardrnagnetic 2141-grains. A continuous non-magnetic layer phase between the hardrnagnetic 2141-grains increases the expansion field of reversed domains and increase the coercivity. In melt-spun magnets the contribution of the pinning of magnetic domain walls becomes effective during the magnetization reversal process.     

Der o-Effekt in den Massenspektren aromatischer Verbindungen

Zusammenfassung Das Massenspektrum des O-Äthylsalicylsäureamides VII b ist von dem seiner m- und p-isomeren Verbindung völlig verschieden und zeigt einen typischen massenspektrometrischen o-Effekt.Die bisher aufgefundenen Verbindungen mit massenspektro-metrischem o-Effekt gehören einem relativ kleinen Kreis von Aromaten mit ganz bestimmten Strukturmerkmalen an. Die Bildung der für den o-Effekt charakteristischen Bruchstücke kann in allen diesen Fällen nach einem vonMcLafferty aufgestellten Mechanismus zwanglos erklärt werden. Verbindung VIIb hätte unter der Voraussetzung, daß eine Entstehung der für den o-Effekt typischen Fragmente nur nach diesem Mechanismus möglich ist, keinen o-Effekt zeigen dürfen.Das Auftreten des o-Effektes im Massenspektrum von VIIb läßt erkennen, daß die Bedingung zur Bildung der für den o-Effekt charakteristischen Bruchstücke lediglich in der Möglichkeit zur Ausbildung stabiler Spaltprodukte zu suchen ist, und daß daher weit mehr Verbindungen einen o-Effekt zeigen sollten als bisher anzunehmen war.Mit 1 Abbildung     

Thermal analysis of macromolecules

This review traces the development of thermal analysis over the last 40 years as it was experienced and contributed to by the author. The article touches upon the beginning of calorimetry and thermal analysis of polymers, the development of differential scanning calorimetry (DSC), single run DSC and other special instrumentations, up to the recent addition of modulation to calorimetry. Many new words and phrases have been introduced to the field by the author and his students, leaving a trail of the varied interests one can have over 40 years. It began with cold crystallization and most recently the term oriented, intermediate phase was coined, creating in-between: extended chain crystals, the irreversible thermodynamics of melting of polymer crystals, dynamic differential thermal analysis (DDTA), the rule of constant increase ofC _p per mobile bead within a molecule at the glass transition temperature, superheating of polymer crystals, melting kinetics, crystallization during polymerization, the chain-folding principle, molecular nucleation, rigid amorphous phase, a system of classifying molecules, macroconformations, amorphous defects, rules for the entropy of fusion based on molecular shape and flexibility, single-molecule single-crystals, a system of classifying phases and mesophases, and condis phase.First and foremost I would like to acknowledge the unwavering support through my wife, Heidel, without whom many of the projects simply could not have been completed. Similarly, our children had to grow up knowing that often research and teaching had to take precedence. Without coworkers, little could have been accomplished. Of the about 120 postdoctoral fellows, graduate students, and technicians, most of whom contributed to the listed references, and many have participated on their own in this issue, goes my thanks for the bulk of the scientific work. Many friends and colleagues contributed with discussion and constructive criticism, some of them have also contributed in this collection of papers related to thermal analysis. Little work can be done without this interplay of ideas. The limited space has not permitted to give a full appreciation of the importance of the ideas drawn from the literature. These thousands of additional references can be found in the initial papers and reviews of the subjects treated.Material support was received from the three major instrument companies for thermal analysis equipment: TA Instruments, Inc.; Perkin-Elmer Corp.; and Mettler-Toledo, Inc. Without this help we would not always have been able to be at the forefront of instrumentation. Major financial support for the research came from outside the universities. I estimate that over the 40 years about 4 Megadollars were spent by government agencies, companies, and private foundations to support coworkers, myself during the summers, research equipment, expenses, and travel. A large amount of money, but not too much if one compares it to typical expenditures in the field of athletics (about 10 k$ per paper). Major sustained funding came from the Advanced Projects Agency (ARPA), the Office of Naval Research (ONR), the National Aeronautics and Space Agency (NASA), the Department of Energy (DOE), and, most prominently, the National Science Foundation (NSF). At present our work is supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U.S. Department of Energy, under Contract DE-AC05-84OR21400 with Lockheed Martin Energy Systems, Inc. Industrial support is presently given by TA Instruments, Inc; ICI Paints; Exxon Res. and Eng. Co.; Shell Development Co.; Toray Research Center; and Mettler-Toledo, Inc.Last, but by no means least, I would like to thank Dr. E. Turi for the invitation to write this paper and for her untiring effort to entice so many of my students and friends to contribute to this issue of the Journal of Thermal Analysis.     

Determination of trace element concentrations of Libyan chewing and cigarette tobacco by instrumental neutron activation analysis

The concentration of 12 trace elements in the chewing tobacco and two different brands of Libyan cigarette Atlas and Sport has been measured by instrumental neutron activation analysis and compared to the results of cigarette tobacco from India, USA, Iran and Yugoslavia. These elements are Co, Cr, Cu, Fe, Hf, Mn, Rb, Sc, Th, U, V and Zn.     

Similarity and dissimilarity in posets

The relevance of partially ordered sets (or posets) in a wide diversity of contexts in chemistry is emphasized, and the utility of distance functions (or metrics) on such posets is noted. First a notion of scale similarity is introduced to make comparisons within certain so-called scaled posets, for which there is formulated natural comparators, which in turn lead to associated distance functions. Beyond taking note of several chemically relevant examples of these scaled posets and their consequent associated similarity measures, a second chemically relevant class of so-called shifted posets is similarly developed, with examples. Even further extension of some aspects of the current approach is indicated, and finally the multi-posetic character of chemical periodic law is suggested.     

Zur Literaturdokumentation in der Analytischen Chemie

Zusammenfassung Der in den Referatezeitschriften Chemical Abstracts, Analytical Abstracts und Fresenius Zeitschrift für Analytische Chemie erkennbare alphabetischsystematische Aufbau der Indexregister wird dargestellt und beurteilt. Die Beispiele stammen aus den Indexabschnitten Atomabsorptionsspektrometrie (Methode), Phenole (Stoff) und Boden (Material). Unter Berücksichtigung der Ergebnisse werden Vorschläge zur benutzerfreundlichen Gestaltung eines analytisch-chemischen Indexsystems nach einer 3-W-Regel (Fragen nach WAS, WIE und WORIN, WOZU?) gemacht und diese Anforderungen an einer Stichprobe von 47 Referaten von Veröffentlichungen aus 21 verschiedenen Zeitschriften in den Indices der Referatzeitschriften überprüft. Die Recall-Raten nach den vorgegebenen Schlüsselwörtern für jede Teilfrage der 3-W-Regel liegen zwischen 3 und 51% und für die Frage nach der Methode mit 3–14% am niedrigsten.

---

Literature documentation in analytical chemistryIII. Structure and valuation of index systems

Summary The recognizable alphabetic-sytematic structure of the indices in the abstract journals Chemical Abstracts, Analytical Abstracts and Fresenius Zeitschrift für Analytische Chemie is described and criticized. The examples are taken from the index sections atomic absorption spectrometry (method), phenols (substance) and soil (material). In consideration of the results and taking into account the needs of the user suggestions for the construction of an analytical-chemical index system according to a 3-Wprinciple (questions for what, in what way and wherein, whereto) are given, and these requirements are proved by a random sample of 47 abstracts from publications of 21 diverse journals taken from the indices of the abstract journals. The recall ratios resulting from the pretended key words for every sectional question of the 3-W-priciple are between 3 and 51%; for the question as to the method they are most inferior with 3–14%.

---

---

Teil II siehe Fresenius Z Anal Chem 304:28 (1980)     

Analytical Chemistry — today''s definition and interpretation

Conclusion Although this multidisciplinary branch of science is growing rapidly today, yet two main points remain unchanged. On the one hand, it is analytical in essence; on the other, the information which it aims to acquire is chemical in nature, i.e. within the domain of chemistry. Accordingly it seems pertinent to reserve the term Analytical Chemistry for it. Other terms like analytical physics and chemical characterization are one-sided, with the aim or essence missing. The same is true of analytics and analytical science. Moreover, they should, literally speaking, include analytic geometry, analytical mechanics and so on.     

Structural Transformations in Polydisperse Ferrofluids

Real polydisperse ferrofluid is modeled by a bidispersed magnetic colloid composed of large and small particles. It is assumed that the energy of magnetodipole interaction for small particles is much lower and that of large particles is substantially higher than their thermal energy. Therefore, large particles can combine into the chain and droplet aggregates that are present in a sea of small particles. The influence of small particles on the structurization in the ensemble of large particles is studied. It is shown that small particles can either prevent or stimulate these structural transformations depending on the parameters of a medium.     

State-of-the-art in organic elemental micro and ultramicro analysis

Summary Nernst developed a quartz torsion microbalance in 1903. In consequence of this pioneering work, Emich in the Technical University of Graz, Austria, had systematized a series of chemical operations in microscale as well as a microchemical analysis. Further advances in technique and method of organic microanalysis had been accomplished by Pregl in Graz in 1912. His work had been strongly supported by a new microbalance which was known as Kuhlmann microbalance. Pregl's original methods of analysis were arranged and published in 1916 as Die quantitative organische Mikroanalyse. It is still noteable that the Nobel prize of 1933 had been presented to Dr. Pregl. In accordance with a combination of electronic microbalance and computer techniques, organic elemental microanalysis has grown to include advanced instrumentation and on-line computation. Successful adaptation of microchemical analysis has expanded today not only to pure organic compounds, but on industrial intermediates, polymers, food additives and many other compositions. The paper includes a discussion of the relative merits of traditional and modern analytical techniques together with the progression of microbalances. Recent developments in organic micro and ultramicro analysis in Japan are also described.     

Multivariate Statistical Assessment of Air Quality: A Case Study

The present paper deals with the application of several chemometrical methods (cluster and principal components analysis, source apportioning on absolute principal components scores) to an aerosol data collection from Unterloibach, Austria. It is shown that seven latent factors explaining almost 80% of the total variance are responsible for the data structure and are conditionally identified as secondary aerosol, mineral dust, oil burning, lead smelter, coal burning, salt and fertilizer emission sources. Furthermore, the contribution of each identified source to the formation of the particle total mass and chemical compounds total concentration is calculated. Thus, a reliable assessment of the air quality in the region is performed. The requirements of the sustainability concept for ecological indicators in this case is easily transformed into a multivariate statistical problem taking into account not separate indicators but the specific multivariate nature of aerosol pollution.     

Chemical algebra. II: Discriminating pairing products

The algebra of stereogenic pairing equlibria is presented in a very general context. Starting from the notions of fuzzy subgroup and conjugacy link, chemical pairing constants between molecular speciesu andv having a skeletal symmetry groupG are formulated as pairing products on aG-Hilbert space. Discriminating pairing productsK are defined by the conditions: K 1 and K = 1 the representative vectors of the paired species areG-equivalent. WhenG has only two elements, the pairing product is always discriminating. For several skeletal symmetries, if the vectors are enantiomorphic (v = u, ² =e, G), thenK is greater than 1 and reaches 1 only ifu is achiral: chirality indexes and general permutational indexes are then defined fromK(u u). The general model is illustrated by some examples.     

Zero-Dimensional Nanodots on One-Dimensional Nanowires: Reductive Deposition of Metal Nanoparticles on Silicon Nanowires

We review herein the surface chemical properties of silicon nanowires (SiNWs) and show how SiNWs can be used as platforms in doing chemistry in the nanorealm. In particular, the surfaces of HF-treated SiNWs (which are H-terminated) exhibit interesting chemical reactivities towards reductive deposition of metal ions such as silver, copper, palladium, etc., giving rise to metal particles or aggregates on the SiNW surfaces. By varying the concentration of the metal ions in solution, nanostructures of these metals of different shapes, sizes, and morphologies can be fabricated. The reductive growth of ligated Au–Ag clusters of single size, shape, composition, and structure, on the SiNWs was also investigated. Two interesting phenomena, the sinking cluster and the cluster fusion processes, were observed by TEM. These assemblies of metal nanoparticles on silicon nanowires may be considered as zero-dimensional nanodots, on one-dimensional nanowires. It is hoped that fabrication of these metallic nanodots on silicon nanowires will lead to new and novel composite materials of importance in nanotechnology.     

An augmented ribbon model of protein structure

In this paper, work on a new model,an augmented ribbon model, for describing a number of features of primary, secondary, and super-secondary protein structure in a qualitative but mathematically rigorous way is discussed. The structural features that can be treated by the model include connectivity, directionality, chirality, orientation, and proximity which, in many cases, are difficult to deal with using more traditional structural representations (e.g. wireframe, ball-and-stick, or space-filling CPK). In practice, the information encoded in the augmented ribbon model is represented by a labelled, directed graph (digraph) which provides an efficient means for storing and analyzing the information on computers. This opens the way to computer-based analyses of proteins and for the application of similarity methods that have been shown to be quite useful in treating small molecules.     

Natural flavours of wine: correlation between instrumental analysis and sensory perception

Summary The aroma of wine consists of 600 to 800 aroma compounds from which especially those, typical for the variety, are already present in the grapes. The aroma extracts — received by extraction with trichlorofluoromethane — are separated by gas chromatography. There are significant varietal differences between the aromagrams (fingerprint pattern). Thus the amount of some flavour compounds (key substances) shows typical dependence on the variety. Especially monoterpene compounds play an important role in the differentiation of wine varieties.The German white wines can be differentiated into three groups only by quantitative determination of 12 monoterpenes (terpene profile). These groups are: Riesling type, Muscat type and Silvaner-Weißburgunder type. Such terpene profiles are also useful for the separation of real Riesling wines from others called Riesling (e.g. Welschriesling, Kap Riesling, Emerald Riesling) but not produced from grapes of the variety Riesling. Including further components and by means of statistical methods as for example linear discriminant analysis even the different varieties within the mentioned groups (for instance the Riesling-group: Riesling, Kerner, Ehrenfelser, Bacchus, Müller-Thurgau) can be separated from each other.To identify compounds causing off-flavours the sniffing technique is the method of choice. The off-flavour is pinpointed during gas chromatography separation of the complex aroma mixture by effluent sniffing. Once allocated, the chemical nature of the off-flavours is elucidated by spectroscopic methods. Substances contributing to the green pepper taint, the strawberry note, mousiness, corkiness etc. in wine could be found in this way.     

Understanding the properties of isospectral points and pairs in graphs: The concept of orthogonal relation

The mathematical property orthogonal relationship is used in proving the fact that isospectrality, isocodality and isocoefficiency of vertices within a graph are all equivalent. The same is true for isospectrality, strict isocodality and strict isocoefficiency of pairs (including edges) within a graph, whereas the weak versions of the latter properties are necessary but not sufficient for isospectrality of pairs. Similarly, necessary and sufficient conditions for isospectrality of vertices and pairs in different graphs are derived. In all these proofs, the concept of orthogonal relation plays a major role in that it allows the use of tools of elementary linear algebra.     

A new computational microscope for molecules: High resolution MEDLA images of taxol and HIV-1 protease,using additive electron density fragmentation principles and fuzzy set methods

Based on the molecular electron density lego assembler (MEDLA) method, a computational microscope was developed that generates accurate images of bodies of large molecules at a resolution far exceeding current experimental techniques. The MEDLA microscope can be tuned to display the high electron density regions of formal chemical bonds; or to show the low density regions of hydrogen bonds and secondary interactions, or to display local shape requirements important in molecular recognition. The power of the method is illustrated by examples of detailed images of taxol, an important anti-cancer agent, and HIV-1 protease, a protein of 1564 atoms. A mathematical framework of the approach, based on fuzzy sets, and the fundamentals of several additional applications of the additive, fuzzy fragmentation principle are presented.