邻甲酚醛环氧树脂/聚氨酯互穿聚合物网络的形态与性能

邻甲酚醛环氧树脂/聚氨酯互穿聚合物网络的形态与性能;互穿聚合物网络; 邻甲酚醛环氧树脂; 聚氨酯; 力学性能; 玻璃化转变温度     

聚氨酯/环氧树脂互穿网络聚合物的性能研究

互穿聚合物网络（Interpenetrating polymer net-work,简称IPN）广泛应用的为聚氨酯基的互穿网络聚合物。其合成多集中在弹性体方面。本文用同步法合成的聚氨酯／环氧树脂互穿网络硬质泡沫塑料材料（简称PU／ERIPNF）,机械性能较好,并研究了其动态力学性能及形态变化。     

聚碳酸酯型聚氨酯互穿网络聚合物的研究概况

简述了聚磷酸酯型聚氨酯（PCU）互穿网络聚合物（IPN）的发展及最新研究动态。介绍了其制备、表征、结构与性能的关系。预示了聚碳酸酯型聚氨酯互穿网络聚合物材料的开发前景。     

聚氨酯/乙烯基酯树脂互穿聚合物网络阻尼性能的研究

采用二步法制备了聚氨酯／乙烯基酯树脂互穿聚合物网络,动态力学分析法研究了ＩＰＮ的阻尼性能。结果表明,聚氨酯／乙烯基酯树脂互穿聚合物网络出现宽温度阻尼范围。当聚氨酯／乙烯基酯树脂＝４０／６０时,材料的宽温度范围的阻尼性能最好。在体系中引入柔性链可改善低温阻尼性能,而引入刚性链则降低阻尼值、提高阻尼温度、阻尼温度范围变窄。在体系中引入大侧基能显著提高聚氨酯／乙烯基酯树脂互穿聚合物网络的阻尼性能,提高交     

不饱和聚酯／聚氨酯互穿网络聚合物的合成

以醋酸酐封端的不饱和聚酯（ＦＵＰＲ）与交联聚氨酯预聚物制备了具有互穿聚合物网络（ＩＰＮ）的不饱和聚酯／聚氨酯，通过红外，ＤＳＣ和扫描电镜等分析了ＦＵＰＲ／ＰＵＩＰＮ网络形成的动力学，微相分离行为及力学性能，结果表明，当ＦＵＰＲ／ＰＵ达到某一比值时，产生网络互穿效应，可改善聚氨酯的刚性，提高不饱和聚酯的抗冲性。     

蓖麻油TDI聚氨酯互穿网络的热降解

互穿网络聚合物;蓖麻油;聚氨酯;甲苯二异氰酸酯;热降解     

聚环氧氯丙烷聚氨酯／聚甲基丙烯酸甲酯IPN力学性能

利用改变组成比、聚氨酯ＰＵ软段的分子量、Ｒ值、异氰酸酯和两网络各自交联剂含量合成出５个系列的聚环氧丙烷聚氨酯／聚甲基丙烯酸甲酯互穿聚合物网络，利用ＩＰＮ中交联、互穿、缠结程度的不同，并结合ＤＣＳ、ＴＥＭ、动态粘弹谱讨论了ＩＰＮ力学性能。     

反应注射成型聚氨酯互穿聚合物网络研究：刚性网络对于体系形…

用微型反应注射成型机制备了以聚氨酯（ＰＵ）为弹性相的两类同步互穿聚合物网络（ＳＩＮ），其刚性相分别采用保留仲羟基的乙烯基酯树脂（ＶＥＲＨ）以及封闭仲羟基的乙烯基酯树脂（ＶＥＲＡ）。用傅里叶变换红外光谱在线跟踪了这类互穿网络的生成过程，发现刚性网络抑制了ＰＵＣ网络中硬段有序结构的形成，两个网络间有一定程度的互穿，而两个网络间的化学键作用进一步削弱氢键强度。自旋－自旋驰豫时间的测定进一步表明网络间存在     

蓖麻油聚氨酯／聚甲基丙烯酸甲酯交联共聚物的溶胀

蓖麻油聚氨酯／聚甲基丙烯酸甲酯交联共聚物的溶胀刘和文，蔡宇东，施文芳，周永龙（中国科学技术大学应用化学系合肥２３００２６）（广西分析测试研究中心南宁）关键词蓖麻油聚氨酯，聚甲基丙烯酸甲酯，交联共聚物，溶胀，相逆转互穿网络聚合物（ＩＰＮ）的平衡溶胀度及...     

蓖麻油及其衍生物在聚氨酯中的应用研究进展

蓖麻油是一种重要的可再生生物资源,在许多精细化学品以及聚合物方面有广泛的应用,介绍了蓖麻油及其衍生物在聚氨酯,互穿网络聚合物,聚氨酯弹性体,以及功能聚合物等方面的应用研究进展.指出以蓖麻油为原料改性和制备的聚合物材料不仅可以解决日趋紧缺的石油资源,加快聚合物工业的发展,而且改善了传统聚氨酯的耐热性,耐化学品性和力学性能等,拓宽了聚合物的应用领域.     

8—羟基喹啉树脂的制备及应用研究进展

本文总结了国内外关于8－羟基喹啉螯合树脂的制备方法,树脂性能及其应用。     

Recent development on bio-based thermosetting resins

Due to the rapid depletion of crude oil and serious environmental pollution, the synthesis of polymers from renewable resource is becoming more and more important. Up to now, a great variety of biomass and bio-based platform compounds have been taken to prepare the polymers. However, as two representative thermosetting resins, epoxy and benzoxazine resin derived from renewable feedstocks only obtain limited attention compared with the popular bio-based plastics, including PLA, PBAT and PHBV etc. The reason might be that the properties of previously reported thermosetting resins directly obtained from biomass are usually unsatisfied, and their application fields are limited. In this paper, the latest development on the synthesis of high-performance bio-based epoxy and polybenzoxazine resins are reviewed. In addition, to further broaden their applications, the functionalization strategies are also summarized. The objective of this work is to help us fully aware the present situation of bio-based thermosetting resins and then promote their faster development, especially practical application.     

Polyacrolein-isonicotinic acid hydrazone and polyacrylic acid-thiohydrazide resins-synthesis and sorption properties for precious and base metals

This investigation carries on previous studies on polyacrolein-styrene resins. Further attempts were made to convert the reactive aldehyde groups of the polymeric support to functional acrolein-isonicotinic acid hydrazone (P-NHZ) or acrylic acid-thiohydrazide derivatives (P-THZD). The conditions of synthesis and the basic sorption and desorption properties of the polymers synthesized are described. For gold and platinum group metals the resins show differences in loading capacities, rates of simultaneous sorption in static conditions and efficiencies in column tests. The elution by thiourea solution was utilized to separate Au, Pd and Pt from an excess of base metals. The P-NHZ resin seems to be more advantageous than the sulfur containing P-THZD resin.     

磺化三聚氰胺甲醛树脂与金属钙离子的复合物对水泥的作用

研究了磺化三聚氰胺甲醛树脂（SMF）与金属钙离子的复合物SMF-Ca^2 对水泥的作用,从对水泥吸附、水化等研究结果表明,SMF和Ca^2 间存在着一定的化学作用。在水泥砂浆中加入SMF-Ca^2 复合物比加入纯的SMF树脂能使减水率、抗压强度、抗折强度获得更大的提高。     

苯氧树脂增韧双酚A环氧树脂的研究

以双官能团环氧树脂和双酚Ａ为单体，制备高分子量苯氧树脂，通过ＦＴＩＲ对其分子结构进行分析后，将１０ｗｔ％苯氧树脂加入到Ｅ－４４环氧树脂中，用ＤＳＣ冲击仪和ＳＥＭ等对增韧效果的分析测定，固化反应活化能降低９％，冲击强度提高６３．２％，玻璃化温度提高了２８℃。     

硅炔杂化树脂改性有机硅树脂及其复合材料的性能

用一种硅炔杂化树脂聚（甲基硅烷-二乙炔基苯）（PSP）改性有机硅树脂（HS）,通过FT—IR和TGA研究了树脂体系的固化反应及耐热性,并对制备的复合材料进行力学性能、耐热性能和介电性能研究。结果表明：当HS与PSP的质量比为5：5时综合性能最优,树脂体系在氮气氛围下质量损失5％时的温度（T幽）为691℃,1000℃时质量保留率为88％;HS—PSP树脂短切玻纤复合材料冲击强度为21kJ／m^2,弯曲强度为65MPa,200℃时的弯曲强度高温保留率为78％,介电常数为4．6,介电损耗因数为7．9×10,体积电阻为6．7×10^13Ω。改性后的复合材料具有优异的力学、耐热和介电性能。     

Studies on the synthesis and curing of epoxidized novolac vinyl ester resin from renewable resource material

Cardanol-based epoxidized novolac vinyl ester resin (CNEVER) was synthesized by reacting cardanol-based epoxidized novolac (CNE) resin and methacrylic acid (MA) (CNE:MA molar ratio 1:0.9) in presence of triphenylphosphine as catalyst at 90 °C. The CNE resin was prepared by the reaction of cardanol-based novolac-type phenolic (CFN) resin and epichlorohydrin, in basic medium, at 120 °C. The CFN resin was synthesized by reacting cardanol (C) and formaldehyde (F) (C/F ratio = 1:0.7) with p-toluene sulphonic acid (PTSA) as catalyst (0.5 wt.%) at 120 °C for 7 h. The resin products were analyzed by Fourier-transform infra-red (FTIR) and nuclear magnetic resonance (NMR) spectroscopic analysis. The number-average molecular weight of the prepared CNEVER was found to be 859 gmol⁻¹ as determined by gel permeation chromatographic (GPC) analysis. The resin was cured by using the mixture of resin, benzoyl peroxide, and styrene at 120 °C. The CNEVER resin was found to be cured in 60 min at 120 °C. Differential scanning calorimetric (DSC) technique was used to investigate the curing behaviour. Single step mass loss in dynamic thermogravimetric (TG) trace of CNEVER was observed. Thermal stability of the vinyl ester sample containing 40 wt.% styrene was the highest amongst all other prepared systems.     

硼酸盐固化酚醛树脂

硼酸与多元醇的络合反应已被用于硼酸浓度的滴定分析、硼选择性树脂等[1 ] 。Ecolotec树脂是一种用硼酸盐固化的碱性酚醛树脂 ,制备时以KOH溶液为溶剂 ,以硼砂为交联剂 ,通入CO2 降低溶液 pH值而交联 ,因其固化快、无污染 ,可用作铸造用冷芯盒树脂砂粘结剂。加入硅烷偶联剂与增塑剂能大幅度提高树脂砂固化后的抗拉强度[2 ] ,以碱金属氧化物与氢氧化物作为促硬剂 ,也可以提高树脂砂强度[3] 。赵鹏等[4] 合成了G盐改性酚醛树脂 ,由该树脂得到的树脂砂固化后 2 4h强度高于Ecolotec树脂。谭晓明等[5 ,6] 发现 ,树脂与硼酸根离子的配位反应是…     

耐高温耐烧灼热固性硼酚醛树脂的合成

用硼酸改性酚醛树脂得耐高温耐烧灼热固性硼酚醛树脂,其结构经IR,DSC,TGA等表征。反应条件：苯酚500mmol,n(苯酚)：n(甲醛)：n(硼酸)=1：1．5：0．4,氨水(pH=8—9)作催化剂,缩合反应温度60℃-70℃,硼酯化反应温度105℃-120℃,同时在控制反应时间下脱水两次。所得产物在700．8℃下仍有75．3％的固体残余物。     

蛇笼树脂

蛇笼树脂作为一种有特异性能的离子交换树脂,发展较快。本文就该树脂的定义、特点、类型、合成方法及应用实例等的近期发展进行了较详细的分析和综述。