Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

Micellar enhanced ultrafiltration of phenol in synthetic wastewater using polysulfone spiral membrane

The micellar enhanced ultrafiltration (MEUF) of phenol in synthetic wastewater using two polysulfone spiral membranes of 6- and 10-kDa molecule weight cut-off (MWCO) and cetylpyridinium chloride (CPC) as cationic surfactant was studied. The effects on the permeate flux, permeate and retentate concentrations of phenol and CPC of various factors in the practical application of MEUF were studied, including surfactant and phenol concentrations, retentate flux, operating pressure, temperature and electrolyte. It was found that these two membranes could adsorb free phenol so the concentration of permeate phenol was lower than that of free phenol. The retentate phenol concentration kept increasing, then decreased slightly with the increase of the feed CPC concentration. Retentate flux and temperature had great effect on the performance of MEUF, and operating pressure did not. The addition of sodium carbonate (Na₂CO₃) could increase the retentate phenol concentration and decrease the permeate concentrations of phenol and CPC significantly.     

Effect of operating parameters on selective separation of heavy metals from binary mixtures via polymer enhanced ultrafiltration

Performance of continuous polymer enhanced ultrafiltration (PEUF) method was investigated for removal of mercury and cadmium from binary mixtures. This method includes the addition of polyethyleneimine (PEI) as a water soluble polymer to bind the metals, which was followed by ultrafiltration operation performed on both laboratory and pilot scale systems. The influence of various operating parameters such as temperature, metal/polymer ratio, presence of calcium ions and pH on retention of metals and permeate flux was investigated. To investigate the possibility of selective separation of mercury and cadmium, experiments were conducted for binary solutions at different pH and loading ratios. It was seen that the retention of mercury decreased and permeate flux increased when the temperature increased. The increased pH and decreased metal/polymer ratio, loading (L), resulted in higher retention of both metals. Shapes of retention vs. pH or L curves were very similar for both metals. Retentions stay almost constant at a value very close to unity until a critical L or pH value was reached, then, R decreases almost linearly with L or pH. However, retention of cadmium was affected more than that of mercury as the pH decreased and L increased. This leads to the selective separation of mercury and cadmium. At low pH values (about 5) and at high L values (about 0.3), mercury was removed by ultrafiltration operation while almost all cadmium passed through the membrane. At pH 5.5 and cadmium/polymer ratio about 0.35 and mercury/polymer ratio about 0.39, the highest separation factor was obtained as 49.     

Micellar enhanced analytical fluorimetry

Fluorescence measurements can be enhanced by the judicious use of micelles in the analytical scheme. This new approach to fluorescence provides increased sensitivity, reduces the number of potential interferences, and offers greater experimental convenience.     

Micellar enhanced microfiltration of strontium

Gamma-ray spectroscopy has been widely used in many areas of applied science. We have used the method to compare the¹³⁷Cs contamination in fungi collected in central Sweden, Ukraine (Kiev region) and southern Ontario, Canada. Mean activities were comparable for Sweden and Ukraine, but were much lower in the North American samples. Many European mushroom species which are considered as prized edibles, contained unacceptably high levels of¹³⁷Cs (1 kBq/kg) and should not be sold for human consumption. By contrast, no activity in mushrooms collected in Ontario or northern Michigan exceed 1 kBq/kg. The excessive contamination in European mushrooms is primarily due to the Chemobyl reactor accident of 1986. However, our observations suggest that about 20% of the¹³⁷Cs contamination in the Ukraine is not due to this accident.     

Micellar ultrafiltration preconcentration of strontium by anionic micellar solution

Th anionic micellar system of the sodium dodecylsulphate (SDS) with di-2-ethylhexylphosphoric acid (D2EHPA) chelating ligand reagent in acctate buffer solutions was studied. The influence of the concentration and the composition of the micellar system for strontium preconcentration was determined. Different pH values of solutions as well as different concentration ratios of the ligand to the surfactant were used.     

Micellar enhanced cyanide ion determination in samples from synthetic organic processes

A method was developed for the recovery and determination of cyanide ion in organic sample matrices. To facilitate the solubilization of cyanide ions, cetyltrimethylammonium bromide (CTAB) was added at concentrations above the critical micelle concentration. Sample cyanation reaction products consisted of solvent mixtures of a hydroxynitrile in DMF-toluene or DMF-isopropylacetate (IPAC). Spectrophotometric determination of cyanide ion at 578 nm by the pyridine-barbituric acid method was automated by flow injection analysis. Recovery of cyanide ion from spiked samples was 93.2% in DMF-IPAC solvent matrix and 93.9% in DMF-toluene. Low alkali concentration was observed to favor solubilization of cyanide ion in the micellar solution.     

Micellar behavior of tetradecyldimethylbenzylammonium chloride in water-alcohol mixtures

The effect of butanol and benzyl alcohol on the critical micelle concentration and the degree of ionization of micelles of tetradecyldimethylbenzylammonium chloride has been studied conductometrically in the temperature range of 5 to 40 degrees C at 5 degrees C intervals. The results indicate that some self-association process of benzyl alcohol in the aqueous phase commences when its concentration amounts to ca 0.05 m. By applying the theoretical treatment suggested by Motomura for binary surfactant systems, the molar fraction of alcohol in the micelle and the standard free energy of solubilization were estimated from the dependence of cmc on temperature and alcohol concentration. For comparative purposes the micellar properties of tetradecyltrimethylammonium bromide in water-alcohol systems at 25 degrees C have also been studied.     

Micellar solutions of ionic surfactants and their mixtures with nonionic surfactants: Theoretical modeling vs. Experiment

Here, we review two recent theoretical models in the field of ionic surfactant micelles and discuss the comparison of their predictions with experimental data. The first approach is based on the analysis of the stepwise thinning (stratification) of liquid films formed from micellar solutions. From the experimental step-wise dependence of the film thickness on time, it is possible to determine the micelle aggregation number and charge. The second approach is based on a complete system of equations (a generalized phase separation model), which describes the chemical and mechanical equilibrium of ionic micelles, including the effects of electrostatic and non-electrostatic interactions, and counterion binding. The parameters of this model can be determined by fitting a given set of experimental data, for example, the dependence of the critical micellization concentration on the salt concentration. The model is generalized to mixed solutions of ionic and nonionic surfactants. It quantitatively describes the dependencies of the critical micellization concentration on the composition of the surfactant mixture and on the electrolyte concentration, and predicts the concentrations of the monomers that are in equilibrium with the micelles, as well as the solution’s electrolytic conductivity; the micelle composition, aggregation number, ionization degree and surface electric potential. These predictions are in very good agreement with experimental data, including data from stratifying films. The model can find applications for the analysis and quantitative interpretation of the properties of various micellar solutions of ionic surfactants and mixed solutions of ionic and nonionic surfactants.     

Synthesis of sterically hindered phenolic compounds from indole and its derivatives

Reactions of 3,5-di-tert-butyl-4-hydroxybenzyl acetate with indole and its derivatives gave a series of sterically hindered phenolic compounds having various functional groups. The products are potentially capable of inhibiting radical chain oxidation processes according to different mechanisms.     

Influence of common ions during ultrafiltration of mixtures: Part I. Common anions mixtures

A lot of experiments were investigated to show the behaviour of an ultrafiltration membrane during the filtration of pure salt solutions. What happens when the filtered solution contains several ions?

In this paper, results are given concerning the filtration of mixtures of two salts solutions, salts with a common anion: NaCl + CaCl₂ and Na₂SO₄ + CaSO₄.

The surface charge of the membrane is characterized by streaming potential measurements and rejection rates by means of chromatography. These results confirm the adsorption of divalent ions on the surface and a good selectivity for divalent cations.     

Removal of heavy metals from wastewater using micellar enhanced ultrafiltration technique: a review

Application of Micellar enhanced ultrafiltration (MEUF) for the removal of different heavy metals has been reviewed. It is considered an economical alternative available to the conventional membrane separation process, because it reduces the requirement of higher pressure and high membrane costs. MEUF is a separation processes which uses surfactants and ultrafiltration membranes to remove multivalent ions from wastewater with high percent rejection using electrostatic attraction between metals and micelles.     

Magnetic susceptibility of some derivatives of cellulose and their mixtures: Theory and experiment

The calculations of the magnetic susceptibility (χ) of the selected derivatives of cellulose have been performed using the localized molecular orbitals with the basis set of Gaussian functions. The advantages of the variational procedure in the framework of the approximation of the additivity of the localized molecular fragments for the evaluation of the magnetic susceptibility and nuclear magnetic shielding (σ) and the comparison with the NMR of high-resolution data have been discussed. Theoretical values for χ of the 50 sizable organic molecules have been presented. © 1992 John Wiley & Sons, Inc.     

克拉霉素酚性糖苷衍生物的合成

以克拉霉素为起始原料,经脱克拉定性糖、2′-OH选择性酰化和脱乙酰基反应得到2′-O-对羟基苯甲酰基-3-羟基-克拉霉素中间体,继续在相转移催化的条件下,通过酚羟基Koenigs-Knorr糖苷化反应,合成了克拉霉素2-氨基葡萄糖糖苷化衍生物、半乳糖苷化衍生物和葡萄糖苷化衍生物,总收率为50～60％.所有产物结构经NM...     

Micellar effects upon the reactions of amino acids and their derivatives with 2,6-dinitro-4-trifluoromethylbenzene sulfonate ion

In the absence of surfactants 2,6-dinitro-4-trifluoromethylbenzene sulfonate ion (1) and 2,4-dinitrofluorobenzene (DNF) have similar reactivities towards glycinate and glycylglycinate ions, but -substituents hinder reactions with 1 but not with DNF, and hydroxide ion is relatively unreactive towards 1. Cationic micelles of cetyltrimethylammonium bromide (CTABr) strongly catalyze reactions of 1 with leucinate, phenylalaninate or -phenylglycinate, but there is little catalysis of reactions of the more hydrophilic nucleophiles glycinate, and glycylglycinate ions, glycineamide and hydroxide ion, whereas the CTABr catalysis of reactions of DNF is less sensitive to the nature of the nucleophile. Rate enhancements by CTABr of the reactions of 1 are: glycinate 6(28); glycylglycinate 6(26); leucinate 93(34); phenylalaninate 740(104); -phenylglycinate 247(65); glycineamide 1(5·5); OH⁻ 3(60). (The values for DNF are in parentheses). The concentrations of CTABr necessary for catalysis of reactions of 1 are much less than for reactions of DNF. These observations suggest that 1 interacts very strongly with CTABr micelles. Added salt decreases the CTABr catalysis and anionic micelles of sodium lauryl sulfate do not affect reactions of 1 with glycinate or glycylglycinate.     

Phase separation in aqueous mixtures of hydrophobically modified cellulose derivatives with their nonmodified analogues

Mixtures of hydrophobically graft-modified cellulose derivatives and their nonmodified analogues have been studied in aqueous solution. A qualitatively similar behavior was found in the phase behavior of nonionic as well as of cationic polymer systems. Over a large range of total polymer concentrations and mixture ratios the solutions phase separated into two phases of similar polymer concentration, with one of the phases enriched in the hydrophobically modified polymer. From the manufacturing process the cellulose derivatives investigated are likely to contain polymer chains with a rather continuous distribution in degrees of substitution and, possibly, substitution patterns. This causes a complex phase behavior that cannot be adequately described by a ternary representation. The multicomponent nature became apparent from composition analyses of the phases in equilibrium. It may thus be more appropriate to view the phase separation as a fractionation. A phase of small relative volume with a highly enhanced hydrophobe content (compared to the original hydrophobically modified polymer sample) was created. This was particularly obvious in more dilute solutions. Sometimes the phase separation was difficult to observe because the phases in equilibrium had similar polymer concentrations and, therefore, similar refractive indices. The observations presented here call for the attention of producers and users of these types of polymers. Received: 6 July 2000 Accepted: 6 September 2000     

Micellar structures of poly(styrene-b-4-vinylpyridine)s in THF/toluene mixtures and their functionalization with gold

The effects of the block copolymer composition and the solvent selectivity on the micellar morphologies of poly(styrene- b-4-vinylpyridine)s (PS- b-P4VPs) and their functionalizations with gold were studied in 10 mg/mL solutions using small-angle X-ray scattering and transmission electron microscopy (TEM). The solvent selectivity for the PS block was controlled by toluene/tetrahydrofuran (THF) mixtures in which toluene and THF are selective for PS and nonselective, respectively. The micellar structure was strongly dependent on phi (wt % toluene in toluene/THF mixture) and the composition of the block copolymers. PS(12K)- b-P4VP(11.8K) (symmetric) showed spherical micelles in the entire range of phi except phi = 0 (THF, nonselective solvent). PS(3.3K)- b-P4VP(18.7K) (asymmetric, longer P4VP) showed multiple morphologies with transitions from spheres to cylinders and finally to vesicles with an increase in phi. PS(19.6K)- b-P4VP(5.1K) (asymmetric, longer PS) showed spherical micelles only at the narrow ranges of 90 wt % 相似文献   

Application of micellar enhanced ultrafiltration for the removal of sunset yellow dye from aqueous media

In this article, we report the removal of a reactive dye, viz. sunset yellow, from the aqueous solution using micellar media of two cationic surfactants, viz. cetyltrimethylammonium bromide and ethyl hexadecyldimethyl ammonium bromide (. The values of rejection coefficient (R%) and permeate flux (J) have been calculated using membranes with different pore sizes, viz. 10,000 (10k) molecular weight cutoff (MWCO) and 30,000 (30k) MWCO at 1.5 bar transmembrane pressure. The membrane of 30k MWCO was found to be more suitable in order to retain the dye molecules incorporated in the micelles.