Facile Green Synthesis of NiO/NiCo2O4 Nanocomposite as an Efficient Electrochemical Platform for Determination of Dopamine

The synthesis of NiO/NiCo₂O₄ nanoparticles by an eco-friendly, fast, simple and cost-effective approach employing Urtica extract is reported in this study. The NiO/NiCo₂O₄ nanocomposite were characterized using VSM, FTIR, XRD, and SEM techniques. Moreover, to construct a modified carbon paste electrode, NiO/NiCo₂O₄ were employed and this sensor was used for dopamine (DA) detection. Using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques, the electrochemical behavior of dopamine at the NiO/NiCo₂O₄/CPE was investigated. Analysis of dopamine, with a limit of detection (LOD) equal to 0.04 μM, in the concentration range of 0.1–100.0 μM, was facilitated by NiO/NiCo₂O₄/CPE. Moreover, the satisfactory selectivity for DA determination in the presence of uric acid (UA) and ascorbic acid (AA), was obtained. The suggested new sensor displayed a good reproducibility, sensitivity, and stability for determination of DA in drug and biological samples.     

Novel Fe2O3@CeO2 Coreshell‐based Electrochemical Nanosensor for the Voltammetric Determination of Norepinephrine

A new selective carbon paste electrode (CPE), was applied as an electrochemical sensor for the detection of norepinephrine (NOE). The sensor was modified with 6‐amino‐4‐(3,4‐dihydroxyphenyl)‐3‐methyl‐1,4‐dihydropyrano[2,3‐c],pyrazole‐5‐carbonitrile (ADPC) assisted Fe₂O₃@CeO₂ coreshell nanoparticles (CNs) synthesized by simple method. To identify the redox properties of the modified electrode, and to examine its electrochemical properties, cyclic voltammetry (CV), chronoamperometry and differential pulse voltammetry (DPV) were conducted. Through electrochemical investigations, the coefficient of electron transfer between ADPC and the CNs/CPE (i. e. carbon paste electrode which was modified with CNs), the apparent charge transfer rate constant (k_s), and the diffusion coefficient (D) were calculated. The NOE oxidation occurred at the optimum pH of 7.0 and a potential that was about 235 mV less positive than that of the unmodified carbon paste electrode. The interaction between the two metals in the Fe₂O₃@CeO₂ coreshell led to an increase in the surface area and, consequently a sharp increase in the current. The differential pulse voltammogram of NOE showed two linear dynamic ranges an excellent detection limit (3σ) of 40 nM. In addition, NOE, AC and Trp were simultaneously determined at the modified electrode. Finally, NOE was quantitated in a number of real samples.     

OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

Determination of Anti-Parkinson Drug Pramipexole Using a Label-free Biosensor and Evaluation of its Interaction with ds-DNA

In this study, we fabricated an effective and sensitive DNA biosensor based on flower-like Pt/NiCo₂O₄ modified carbon paste electrode (FL-Pt/NiCo₂O₄/CPE) for detection of pramipexole (PPX). Spectrophotometry, differential pulse voltammetry (DPV) and docking methods were employed to evaluate the interaction of DNA-PPX. Moreover, the DPV technique was chosen to monitor the electrochemical response of guanine on the DNA biosensor. The relationship between the concentration of PPX and the oxidation signal of guanine was linear in the range of 0.4 to 310.0 μM and a limit of detection (LOD) of 0.09 μM was calculated.     

An electrochemical biosensor for α-fetoprotein based on carbon paste electrode constructed of room temperature ionic liquid and gold nanoparticles

A novel and effective electrochemical immunosensor for the rapid determination of α-fetoprotein (AFP) based on carbon paste electrode (CPE) consisting of room temperature ionic liquid (RTIL) N-butylpyridinium hexafluorophosphate (BPPF₆) and graphite. The surface of the CPE was modified with gold nanoparticles for the immobilization of the α-fetoprotein antibody (anti-AFP). By sandwiching the antigen between anti-AFP on the CPE modified with gold nanoparticles and the secondary antibody, polyclonal anti-human-AFP labeled with horseradish peroxidase (HRP-labeled anti-AFP), the immunoassay was established. The concentration of AFP was determined based on differential pulse voltammetry (DPV) signal, which was generated in the reaction between O-aminophenol (OAP) and H₂O₂ catalyzed by HRP labeled on the sandwich immunosensor. AFP concentration could be measured in a linear range of 0.50-80.00 ng mL⁻¹ with a detection limit of 0.25 ng mL⁻¹. The immunosensor exhibited high sensitivity and good stability, and would be valuable for clinical assay of AFP.     

A Newly Competitive Electrochemical Sensor for Sensitive Determination of Chrysin Based on Electrochemically Activated Ta2O5 Particles Modified Carbon Paste Electrode

A novel electrochemically activated doped Ta₂O₅ particles modified carbon paste electrode (EA‐Ta₂O₅‐CPE) was prepared and applied for selective and sensitive determination of chrysin. X‐ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) techniques and cyclic voltammetry (CV) were used to characterize the Ta₂O₅ particles and investigate the electrochemical response of the sensor. Compared with bare CPE, the doped Ta₂O₅ modified electrode got much more porous by electrochemical treatment and exhibited larger effective surface area, more reactive site and excellent electrochemical catalytic activity toward the oxidation of chrysin. Under optimum conditions by LSV, the oxidation peak currents responded to chrysin linearly over a concentration range from 5.0×10⁻⁸ to 7.0×10⁻⁶ mol L⁻¹ with a detection limit of 2.0×10⁻⁸ mol L⁻¹ (5.08 ng mL⁻¹). The fabricated sensor showed anti‐interference ability against the biological common interferents (i.e. baicalein, baicalin) and provided to be reliable for the determination of chrysin in Chinese medicinal herb Oroxylum indicum and chrysin capsules samples with satisfactory results.     

Electrochemical Biosensor for the Detection of Interaction Between Arsenic Trioxide and DNA Based on Guanine Signal

The interaction of arsenic trioxide (As₂O₃) with calf thymus double‐stranded DNA (dsDNA), calf thymus single‐stranded DNA (ssDNA) and also 17‐mer short oligonucleotide (Probe A) was studied electrochemically by using differential pulse voltammetry (DPV) with carbon paste electrode (CPE) at the surface and also in solution. Potentiometric stripping analysis (PSA) was employed to monitor the interaction of As₂O₃ with dsDNA in solution phase by using a renewable pencil graphite electrode (PGE). The changes in the experimental parameters such as the concentration of As₂O₃, and the accumulation time of As₂O₃ were studied by using DPV; in addition, the reproducibility data for the interaction between DNA and As₂O₃ was determined by using both electrochemical techniques. After the interaction of As₂O₃ with dsDNA, the DPV signal of guanine was found to be decreasing when the accumulation time and the concentration of As₂O₃ were increased. Similar DPV results were also found with ssDNA and oligonucleotide. PSA results observed at a low DNA concentration such as 1 ppm and a different working electrode such as PGE showed that there could be damage to guanine bases. The partition coefficients of As₂O₃ after interaction with dsDNA and ssDNA in solution by using CPE were calculated. Similarly, the partition coefficients (PC) of As₂O₃ after interaction with dsDNA in solution was also calculated by PSA at PGE. The features of this proposed method for the detection of DNA damage by As₂O₃ are discussed and compared with those methods previously reported for the other type of DNA targeted agents in the literature.     

Voltammetric Determination of Metronidazole Using a Sensor Based on Electropolymerization of α‐Cyclodextrin over a Carbon Paste Electrode

An electrochemical sensor for metronidazole (MTZ) was built via the surface modification of a carbon paste electrode (CPE) by a film obtained through electropolymerization of α‐cyclodextrin (CPE_α‐CD). The CPE_α‐CD was characterized by cyclic voltammetry (CV) and atomic force microscopy (AFM), by both techniques was demonstrated that the polymer film is coating the electrode surface. The electroreduction behaviour of MTZ in HClO₄ media as a supporting electrolyte was studied by differential‐pulse voltammetric (DPV) technique. The DPV electrochemical process was observed to be diffusion controlled and irreversible. Under optimal conditions, the peak current was proportional to MTZ concentration in the range of 0.5 to 103.0 μM with a detection limit of 0.28±0.02 μM. The method was successfully applied to quantify of MTZ in pharmaceutical formulations. In addition, this proposed MTZ sensor exhibited good reproducibility, long‐term stability and fast current response.     

Introduction of Ketamine as a G‐Quadruplex‐Binding Ligand Using Platinum Nanoparticle Modified Carbon Paste Electrode

We designed an electrochemical platform by modifying a carbon paste electrode (CPE) with platinum nanoparticles to study the interaction between ketamine and the G‐quadruplex structure of human telomeric DNA (G₄HTD). The drug ketamine (Kt) was used as the model ligand and its ability for stabilizing the G‐quadruplex structure was examined. The modified CPE (NPtCPE) was characterized by differential pulse voltammetry (DPV) and atomic force microscopy (AFM). The interaction of Kt with G₄HTD was studied by DPV and the DPV current decreased with increasing Kt concentration. The results from UV‐vis and circular dichroism (CD) spectroscopy showed a prominent intercalation mode between G₄HTD and Kt.     

Synthesis of Ferrocene Based Naphthoquinones and its Application as Novel Non‐enzymatic Hydrogen Peroxide

At present, a highly sensitive hydrogen peroxide (H₂O₂) sensor is fabricated by ferrocene based naphthaquinone derivatives as 2,3‐Diferrocenyl‐1,4‐naphthoquinone and 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone. These ferrocene based naphthaquinone derivatives are characterized by H‐NMR and C‐NMR. The electrochemical properties of these ferrocene based naphthaquinone are investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) on modified glassy carbon electrode (GCE). The modified electrode with ferrocene based naphthaquinone derivatives exhibits an improved voltammetric response to the H₂O₂ redox reaction. 2‐bromo‐3‐ferrocenyl‐1,4‐naphthoquinone show excellent non‐enzymatic sensing ability towards H₂O₂ response with a detection limitation of 2.7 μmol/L a wide detection range from 10 μM to 400 μM in H₂O₂ detection. The sensor also exhibits short response time (1 s) and good sensitivity of 71.4 μA mM^?1 cm^?2 and stability. Furthermore, the DPV method exhibited very high sensitivity (18999 μA mM^?1 cm^?2) and low detection limit (0.66 μM) compared to the CA method. Ferrocene based naphthaquinone derivative based sensors have a lower cost and high stability. Thus, this novel non‐enzyme sensor has potential application in H₂O₂ detection.     

Electrochemical detection of benzo(a)pyrene and related DNA damage using DNA/hemin/nafion–graphene biosensor

A novel electrochemical biosensor, DNA/hemin/nafion–graphene/GCE, was constructed for the analysis of the benzo(a)pyrene PAH, which can produce DNA damage induced by a benzo(a)pyrene (BaP) enzyme-catalytic product. This biosensor was assembled layer-by-layer, and was characterized with the use of cyclic voltammetry, electrochemical impedance spectroscopy (EIS) and atomic force microscopy. Ultimately, it was demonstrated that the hemin/nafion–graphene/GCE was a viable platform for the immobilization of DNA. This DNA biosensor was treated separately in benzo(a)pyrene, hydrogen peroxide (H₂O₂) and in their mixture, respectively, and differential pulse voltammetry (DPV) analysis showed that an oxidation peak was apparent after the electrode was immersed in H₂O₂. Such experiments indicated that in the presence of H₂O₂, hemin could mimic cytochrome P450 to metabolize benzo(a)pyrene, and a voltammogram of its metabolite was recorded. The DNA damage induced by this metabolite was also detected by electrochemical impedance and ultraviolet spectroscopy. Finally, a novel, indirect DPV analytical method for BaP in aqueous solution was developed based on the linear metabolite versus BaP concentration plot; this method provided a new, indirect, quantitative estimate of DNA damage.     

The synthesis and electrochemistry of 2,5-dimethylazaferrocenes with heteroaryl bridges

We report on the synthesis of complexes having two equivalent redox active 2,5-dimethylazaferrocenyl entities connected by heteroaryl (heteroaryl = thiophenyl, bithiophenyl and pyridyl) bridges. The new compounds have been investigated by various electrochemical techniques including cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square wave voltammetry (SW) and were found to exhibit two consecutive reversible or partially reversible one-electron oxidations. Comproportionation constants (K_c) calculated from ΔE_1/2 values indicate that the thermodynamic stability of their monoxidized forms exceeds those of analogous ferrocenes. In this paper we also report the X-ray crystal structure and UV–Vis spectroelectrochemistry of parent 2,5-dimethylazaferrocene.     

Graphene Functionalized Graphite Electrode with Diphenylacetylene for Sensitive Electrochemical Determination of Adenosine‐5′‐triphosphate

In this paper a molecular wire modified carbon paste electrode (MW‐CPE) was firstly prepared by mixing graphite powder with diphenylacetylene (DPA). Then a graphene (GR) and chitosan (CTS) composite film was further modified on the surface of MW‐CPE to receive the graphene functionalized electrode (CTS‐GR/MW‐CPE), which was used for the sensitive electrochemical detection of adenosine‐5′‐triphosphate (ATP). The CTS‐GR/MW‐CPE exhibited excellent electrochemical performance and the electrochemical behavior of ATP on the CTS‐GR/MW‐CPE was carefully studied by cyclic voltammetry with an irreversible oxidation peak appearing at 1.369 V (vs. SCE). The electrochemical parameters such as charge transfer coefficient (α) and electrode reaction standard rate constant (k_s) were calculated with the results of 0.53 and 5.28×10^?6 s^?1, respectively. By using differential pulse voltammetry (DPV) as detection technique, the oxidation peak current showed good linear relationship with ATP concentration in the range from 1.0 nM to 700.0 µM with a detection limit of 0.342 nM (3σ). The common coexisting substances, such as uric acid, ascorbic acid and guanosine‐5′‐triphosphate (GTP), showed no interferences and the modified electrode was successfully applied to injection sample detection.     

A magnetic CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> nanocomposite fabricated by the sol-gel method for electrocatalytic oxidation and determination of L-cysteine

Magnetic CoFe₂O₄/SiO₂ spinel-type nanocomposites have been fabricated by a sol-gel method in the presence of various acids. Their structural, morphological and magnetic properties were characterized by XRD, SEM, TEM, FTIR, VSM and EDX which revealed that they are formed in the presence of all precursors. TEM analysis indicates homogeneous and porous spherical morphology with nanosize grains 10–20 nm in diameter in the presence of salicylic acid. Electrochemical sensor application of nanocrystalline CoFe₂O₄/SiO₂ synthesized by salicylic acid for determination of L-cysteine was investigated using differential pulse voltammetry (DPV) and cyclic voltammetry (CV). DPV indicates that the sensor shows remarkable sensitivity for the determination of L-Cys. The response of a glassy carbon electrode modified with CoFe₂O₄/SiO₂ is linear in the 0.02–425 μM L-Cys concentration range, with a 0.20 μM detection limit (at an S/N ratio of 3). The electrode produces a negligible current response for tryptophan, glutamic acid and citric acid at the working potential applied (+0.748 V vs Ag/AgCl). The electrode is reliable, simple, rapidly prepared, precise, and the method does not require extensive sample treatment.

Open image in new window

Graphical abstract A CoFe₂O₄/SiO₂ magnetic nanocomposite was synthesized by a sol-gel auto combustion method in the presence of various acids as precursors. A highly sensitive electrochemical sensor was fabricated for determination of trace amount of L-cysteine using a glassy carbon electrode modified with the nanocomposite.

     

L‐Cysteine Voltammetry at a Carbon Paste Electrode Bulk‐Modified with Ferrocenedicarboxylic Acid

The electrochemical behavior of L ‐cysteine studied at the surface of ferrocenedicarboxylic acid modified carbon paste electrode (FDCMCPE) in aqueous media using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry. It has been found that under optimum condition (pH 8.00) in cyclic voltammetry, the oxidation of L ‐cysteine occurs at a potential about 200 mV less positive than that of an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α, and catalytic reaction rate constant, k_h were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of L ‐cysteine showed a linear dependent on the L ‐cysteine concentration and linear analytical curves were obtained in the ranges of 3.0×10^?5 M–2.2×10^?3 M and 1.5×10^?5 M–3.2×10^?3 M of L ‐cysteine concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods respectively. The detection limits (3σ) were determined as 2.6×10^?5 M and 1.4×10^?6 M by CV and DPV methods.     

Fe2V4O13 Nanoparticles Based Electrochemical Sensor for the Simultaneous Determination of Guanine and Adenine at Nanomolar Concentration

A simple strategy has been proposed for the simultaneous quantification of guanine (GU) and adenine (AD) using Fe₂V₄O₁₃ nanoparticles (Fe₂V₄O₁₃ NPs) modified carbon paste electrode (Fe₂V₄O₁₃NPs/CPE) in phosphate buffer solution (PBS). The Fe₂V₄O₁₃ NPs were prepared by a simple solution combustion method where sucrose was used as a fuel. The electrochemical behavior of GU and AD at the electrochemical interface has been studied by using cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV). The results illustrate that the Fe₂V₄O₁₃ NPs shows enhanced electrocatalytic activity and voltammetric response towards GU and AD. The proposed sensor showed linearity between the concentration 0.5 and 60 μM with limit of detection (LOD) 32 and 37 nM for GU and AD respectively. The sensitivity towards GU and AD were respectively found to be 1.393 and 1.851 μA/μM. Further, the proposed electrochemical sensor has been successfully employed to determine GU and AD contents in milk powder and calf thymus DNA samples.     

Fabrication of Hemoglobin/Ionic Liquid Modified Carbon Paste Electrode Based on the Electrodeposition of Gold Nanoparticles/CdS Quantum Dots and Its Electrochemical Application

A novel H₂O₂ amperometric biosensor based on the electrodeposition of gold nanoparticles (AuNPs) and CdS quantum dots (CdS QDs) onto a carbon paste electrode (CPE) and immobilizing hemoglobin (Hb) with ionic liquid (IL), is presented in this article. The modification process of the electrode was monitored by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Due to synergistic effects of AuNPs, CdS QDs and IL, the biosensor exhibited high stability and good bioelectrocatalytic ability to H₂O₂ with a linear concentration range from 10 to 750 µM and a detection limit of 4.35 µM (S/N=3).     

Electrochemical determination of 5-hydroxytryptamine using mesoporous SiO<Subscript>2</Subscript> modified carbon paste electrode

A mesoporous SiO₂ was synthesized according to the published work, and then used to modify the carbon paste electrode (CPE). The electrochemical behaviors of 5-hydroxytryptamine (5-HT) at the bare CPE and the mesoporous SiO₂ modified CPE were compared. Owing to the huge surface area, unique mesopores and strong adsorptive ability, the oxidation signal of 5-HT at the mesoporous SiO₂ modified CPE greatly increased, compared with that at the bare CPE. This clearly suggests that the mesoporous SiO₂ modified electrode shows efficient and remarkable enhancement effect towards 5-HT. Based on this, a sensitive, rapid and convenient electrochemical method was developed for the determination of 5-HT after optimizing the experimental parameters such as supporting electrolyte, content of mesoporous SiO₂ as well as accumulation time. The linear range is from 2.0 × 10⁻⁷ to 1.5 × 10⁻⁵ mol/l, and the limit of detection is as low as 8.0 × 10⁻⁸ mol/l after 2-min accumulation. The relative standard deviation (RSD) for 10 mesoporous SiO₂ modified CPEs is evaluated to be 6.7%. Finally, this novel method was successfully used to determine 5-HT in human blood serums.     

Catechol as an electrochemical indicator for voltammetric determination of <Emphasis Type="Italic">D</Emphasis>-penicillamine in aqueous media at the surface of carbon paste electrode

The utilization of catechol as an electrochemical indicator for the presence of D-penicillamine (D-PA) at a carbon paste electrode (CPE) has been investigated in aqueous media using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and double step potential chronoamperometry methods. The results show that D-PA participates in Michael type addition reaction with electrogenerated quinone from electrooxidation of catechol at CPE to form the corresponding thioquinone derivative. The reoxidation of the adduct leads to the increase in the oxidative current which is proportional to the concentration of D-PA. Therefore, in the optimum condition (pH 7.00) by CV, the oxidation of D-PA occur at a potential about 343 mV less positive than that in the absence of catechol at the surface of CPE. The practical utility of the method showed much reproducible responses, short response time, low detection limit and high sensitivity for determination of D-PA. The proposed method is useful for the routine analysis of D-PA in pharmaceutical formulations.     

mga Genosensor for Early Detection of Human Rheumatic Heart Disease

The 5′ amino-labeled DNA probe complementary to mga gene of Streptococcus pyogenes was immobilized on carboxylated multiwall carbon nanotubes electrode and hybridized with 0.1–100 ng/6 μl single-stranded genomic DNA (ssG-DNA) of S. pyogenes from throat swab of suspected rheumatic heart disease (RHD) patients. Electrochemical response was measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance (EI). The sensitivity of the sensor was 106.03?(μA/cm²)/ng and limit of detection (LOD) was found 0.014 ng/6 μl with regression coefficient (R ²) of 0.921 using DPV. The genosensor was characterized by FTIR and SEM, and electrode was found stable for 6 months on storage at 4 °C with 5–6 % loss in initial DPV current. mga genosensor is the first report on RHD sensor which can save life of several suspected patients by early diagnosis in 30 min.