混合工质用于单级压缩制冷回热循环的理论研究与分析

主要利用NIST8.0软件,针对R23/R134 a,R23/R600 a,R23/R125,R23/R14等二元混合工质在Linde-Hampson循环下进行了理论分析,设计一套可制得-60℃的单级压缩节流回热循环系统。通过对工质成分特性分析对比,研究其对循环的热力学性能的影响规律,得到了最佳制冷剂组合。     

R11/R134a混合工质管束外沸腾传热的EHD强化试验研究

采用EHD强化技术对R11/R134a混合工质进行管束外沸腾传热的试验研究,以试验所获得的大量数据为基础,分析了电场电压、热流密度与换热系数、强化系数之间的关系,并重点分析了不同工质组分对EHD强化效果的影响,为探索EHD强化沸腾换热的机理以及将其推广到工程应用提供了一定依据。     

多组份混合工质掺混机理数值研究

本文采用高分辨率的数值算法,分析了热解炉内多组份湍流流场。在冷态掺混实验以前对其进行了数值模拟以指导实验,数值模拟的结果定性上得到了冷态掺混实验的证实。为研究旋焰乙炔热解炉喷油联产乙烯的化学反应机理及工程放大问题提供了依据。     

R125/R600a二元混合物的热力学性质

基于制冷剂物性计算软件NIST REFPROP 7.0及R125/R600a气液相平衡实验数据,使用MBWR状态方程结合Lemmon-Jacobsen混合物模型,对R125/R600a(50/50 mass%)混合替代工质的热力学性质进行了计算,并制作给出了其压焓图(p-h)、温熵图(T-s)和比定压热容图(c<,p>-T)及饱和性质表.最后理论计算分析了其空调制冷工况的性能,结果表明该混合工质具有与R22相当的压缩比和COP值,比R22较低的排气温度和较高的单位质量制冷量.     

Cr/Ti掺杂石墨烯活化CO2分解的理论研究

为筛选更高效的CO2分解还原的催化材料,采用密度泛函理论中的B3LYP方法结合6-31G(d)基组,研究了Cr、Ti掺杂石墨烯对CO2分子的吸附与催化分解的机理.研究结果表明：CO2分子在Cr元素和Ti元素掺杂石墨烯表面的吸附为放热过程,吸附能分别为28.3kcal/mol和7.7kcal/mol,两种元素掺杂石墨烯催化CO2分子中C-O断裂的活化能分别为15.5kcal/mol和7.8kcal/mol,反应过程遵循插入-消除原理,计算结果为CO2还原的催化剂设计提供理论指导.     

二元混合工质的节流最大转变温度状态方程计算

基于对 Joule- Thomson系数αh 及转变曲线计算公式的推导 ,计算了二元混合工质的最大转变温度 Tkm ,所得结果对节流制冷机的性能分析及工质选择具有重要的意义     

Pd@C2N单原子催化剂用于HCOOH分解制氢的第一性原理研究

用于HCOOH分解制氢的贵金属催化剂存在着反应选择性差和资源稀缺等问题. 单原子催化可以有效改善催化剂性能并降低成本,C2N作为一种新型二维材料可为过渡金属原子提供良好的结合位点. 本文利用密度泛函理论,设计了Pd@C2N 单原子催化剂,研究了HCOOH在Pd@C2N表面上的吸附和分解制氢反应机理. 结果表明,HCOOH可在Pd原子顶位吸附,并在C2N表面N原子的协同作用下通过甲酸盐路径生成氢气. 通过比较,Pd@C2N具有比Pd (111)表面更好的催化反应活性与选择性.     

平行板间方势阱偶极流体的结构性质研究

在密度泛函理论(DFT)框架下, 应用改进的基本度量理论(MFMT)表达硬球作用对自由能泛函的贡献, 根据统计力学理论结合加权密度近似(WDA)表达偶极作用对自由能泛函的贡献,得到了方势阱偶极流体在平行板间的密度分布表达式, 计算了偶极流体在两平行板间的密度分布, 并探讨了方势阱深度和宽度对体系密度分布的影响. 此外, 通过体系密度分布, 进一步分析了方势阱宽度和深度以及板间尺度与溶剂化力的关系.     

平行板间方势阱偶极流体的结构性质研究

在密度泛函理论(DFT)框架下, 应用改进的基本度量理论(MFMT)表达硬球作用对自由能泛函的贡献, 根据统计力学理论结合加权密度近似(WDA)表达偶极作用对自由能泛函的贡献,得到了方势阱偶极流体在平行板间的密度分布表达式, 计算了偶极流体在两平行板间的密度分布, 并探讨了方势阱深度和宽度对体系密度分布的影响. 此外, 通过体系密度分布, 进一步分析了方势阱宽度和深度以及板间尺度与溶剂化力的关系.     

基于密度泛函理论的叶绿素A性质的研究

在液相环境中,采用密度泛函理论(DFT)、含时密度泛函理论(TD-DFT)、Multiwfn波函数分析软件,在pbepbe/6-311g(d)基组水平上,计算并分析了叶绿素A的结构、紫外光谱和电子—空穴分布,结果表明:pbepbe/6-311g(d)方法是计算叶绿素A紫外吸收光谱更精确的方法;叶绿素A分子的吡咯环与取代基相互作用的过程中,吡咯环Ⅳ受侧链\"尾巴\"的影响最大;理论计算的紫外光谱与实验数据吻合较好,其中635.71 nm和446.87 nm处的两个吸收峰可认为是叶绿素A的特征吸收峰;侧链或取代基团在叶绿素A激发过程中是给电子体,卟啉\"头\"既是电子供体,也是电子受体.     

Density functional study of the reaction of O2 with a single site on the zigzag edge of graphene

The reaction between molecular oxygen and an isolated zigzag graphene edge has been studied using density functional theory at the B3LYP/6-31G(d) level of theory. The initial reaction forms a peroxide, ΔH = −135 kJ mol⁻¹. If the graphene edge is pre-oxidised, the dangling peroxy atom can (E_a = 91 kJ mol⁻¹) migrate across contiguous ketone groups until finding another vacant site and stabilizing as a ketone. However, if no further vacant sites are available, the peroxy oxygen has a number of other possibilities open to it, including desorption of an oxygen atom (E_a = 140 kJ mol⁻¹), migration via the basal plane to form a lactone (E_a = 147 kJ mol⁻¹), and direct interaction with an adjacent oxide to form the lactone or a carbonate (E_a = 146 kJ mol⁻¹). The combination of thermal energy and the heat released in the initial formation of the peroxy adduct is likely to be sufficient to overcome these secondary barriers at modest temperatures.Transfer of the dangling peroxy O to the basal plane produces an epoxide that is mobile on the basal surface (E_a = 40–80 kJ mol⁻¹) but that is transferred back to the edge upon coming into proximity of either a vacant edge site or ketone. The instability of the edge epoxide structure implies that it cannot play a significant role in carbon gasification through promoting the reactivity of ketones, contrary to earlier suggestions.The desorption of an oxygen atom creates a very active species capable of reacting with basal or edge sites as well as with oxygen complexes. The reaction of ketone + O has been reported to yield a five-membered ring + CO₂, leading to an overall stoichiometry which is consistent with the observed oxyreactivity of carbon surface oxides identified in isotopic labelling studies in which one O atom is gasified and the other forms a new surface oxide.     

Hybrid-DFT study for the initial oxidation steps on silicon cluster surface

We performed a hybrid density functional theory calculation for the successive adsorption of nitrous oxide (N₂O) on Si(1 0 0)-Si₉H₁₂O_x (x = 0 and 1) cluster surfaces to elucidate N₂O decomposition and the subsequent surface oxidation processes. N₂O decomposed into N₂ and O fragments, and the latter fragment inserted into either surface-dimer bonds or back-bonds with similar activation barriers on both the clean and partially oxidized Si surfaces. The Si₉H₁₂ cluster surface was eventually oxidized to five distinct structures of Si₉H₁₂O₂.     

Quantum Computing without Magic,by Zdzislaw Meglicki

We will discuss the key concepts in density functional theory (DFT), how it can be used to model experimental data, and consider how the synergy between DFT and experiment can give significant insights. The discussion will centre on the scanning tunnelling microscope (STM) and surface problems, tracking the author's personal interest, though the general principles are widely applicable.     

A density functional theory study of formaldehyde adsorption and oxidation on CeO2(1 1 1) surface

The effects of different oxygen species and vacancies on the adsorption and oxidation of formaldehyde over CeO₂(1 1 1) surface were systematically investigated by using density functional theory (DFT) method. On the stoichiometric CeO₂(1 1 1) surface, the C-H bond rupture barriers of chemisorbed formaldehyde are much higher than that of formaldehyde desorption. On the reduced CeO₂(1 1 1) surface, the energy barriers of C-H bond ruptures are less than those on the stoichiometric CeO₂(1 1 1) surface. If the C-H bond rupture occurs, CO and H₂ form quickly with low energy barriers. When O₂ adsorbs on the reduced (1 1 1) surface (O₂/O_v species), the C-H bond rupture barriers of formaldehyde are greatly reduced in comparison with those on the stoichiometric CeO₂(1 1 1) surface. If O₂ adsorbs on oxygen vacancy at sub-layer surface, its oxidative roles on formaldehyde are much similar to that of O₂/O_v species.     

食品色素日落黄与诱惑红荧光特性的研究

应用英国Edinburgh FLS920P型稳态和时间分辨荧光光谱仪,对日落黄与诱惑红溶液进行荧光光谱的实验测量,得到日落黄荧光峰在420 nm,诱惑红荧光峰在432 nm。进一步,应用Gaussian 09W软件构建日落黄分子与诱惑红分子的基态和激发态的几何构型,基于密度泛函理论和含时密度泛函理论,完成对两种分子基态和激发态的优化和计算。优化过程中,采用MPWK泛函和6-31g(d)基组;计算过程中,采用B3LYP泛函和6-311g(d,p)基组。考虑到溶剂效应对计算结果的影响,因此在计算过程中引入了极化连续介质模型,最后计算得到日落黄的荧光峰在435 nm,与实验所得有3.57%的相对误差;计算得到诱惑红荧光峰在443 nm,与实验所得有2.55%的相对误差,两种分子荧光峰的相对误差都在允许范围之内,说明计算合理。在分析光谱特性时,发现两种分子荧光峰的产生与分子内电荷转移有关。