Biochar derived from waste bamboo shoots for the biosorptive removal of ferrous ions from aqueous solution

With the ongoing global demands for modern commodities, anthropogenic activities by industries and humans have brought a colossal pressure to the natural water bodies. Though numerous scientific interventions or treatment techniques have been proposed, the need for a viable low-cost method has been a quest for many researchers. Adsorption as such has been in the limelight as an effective method in recent times using various feedstock biomass waste. Our present piece of research aims to use the non-edible biomass waste generated from bamboo shoots as a sustainable low-cost biochar adsorbent and examine its efficiency in the removal of ferrous (Fe²⁺) ions from an aqueous solution. The batch adsorption study was conducted and the optimum dose and concentration were found to be 0.2 g and 7 mg L^?1 with the Langmuir isotherm model best describing the experimental data. Furthermore, kinetic study suggests that the overall sorption rate predominantly follows the chemisorption pathway. Multiple studies suggest bamboo is an excellent adsorbent for treating various inorganic & organic contaminants; here we have highlighted the multifaceted applications of waste bamboo shoots as an effective adsorbing material. The obtained results can lead to additional benefits and usage of bamboo shoots (waste) with future research prospects.     

Microwave-assisted extraction: Application to the determination of emerging pollutants in solid samples

Flame retardants, surfactants, pharmaceutical and personal care products, among other compounds, have been the object of numerous environmental studies. In this chapter, the application of microwave-assisted extraction (MAE) in the development of analytical methods for several groups of organic compounds with growing concern as emerging pollutants has been considered. Compared to other extraction techniques, optimization of MAE experimental conditions is rather easy owing to the low number of influential parameters (i.e. matrix moisture, nature of the solvent, time, power, and temperature in closed vessels). The great reduction in the extraction time and solvent consumption, as well as the possibility of performing multiple extractions, increasing the sample throughput, can also be highlighted among MAE advantages. In summary, the study of several applications of MAE to environmental problems demonstrates that this technique constitutes a good alternative for the determination of organic compounds in environmental samples. It can be used as a rapid screening tool, and also to obtain detailed information on the sources, behaviour and fate of emerging pollutants in environmental matrices.     

Phenol removal from aqueous solution by carbon xerogel

Carbon xerogel (CX) was used for phenol adsorption from aqueous solution. CX was synthesized by sol?Cgel polycondensation of resorcinol with formaldehyde using sodium carbonate (Na₂CO₃) as catalyst. Then, it was dried by convective drying technique and pyrolyzed under inert atmosphere. Phenol adsorption kinetics was very fast, what was attributed to the presence of open pore structure. The kinetic studies showed that the adsorption process could be fitted to a pseudo-second-order model and the particle diffusion process is the rate-limiting step of the adsorption. The phenol removal was maximum and unaffected by pH changes when the initial pH of the phenol solution was in the range of 3?C8. The optimum adsorbent dose obtained for phenol adsorption onto CX was 0.075?g/50?cm³ solution. The Langmuir model described the adsorption process better than the Freundlich isotherm model and the monolayer adsorption capacity is 32?mg?g^?1. Among the desorbing solutions used in this study, the most efficient desorbent was EtOH (100?%) which released about 87?% of phenol bound with the CX.     

苯胺在碳纳米管上的吸附特征

苯胺是一种重要的有机化工原料,能通过皮肤和呼吸道进入人体而引起中毒,还会严重污染环境。目前,国内外处理含苯胺废水的方法主要有氧化法、萃取法、生化法、吸附法等。本文使用碳纳米管进行液相吸附除去苯胺。     

CoFe2O4@Methylcellulose/AC as a New,Green, and Eco-friendly Nano-magnetic adsorbent for removal of Reactive Red 198 from aqueous solution

Methylcellulose (MC) is the most common commercial cellulose ether and the most attractive biopolymer due to its cheap cost of biodegradability, biocompatibility, hydrophilicity, and lack of toxicity. In this study, CoFe₂O₄@MC/activated carbon (AC) was synthesized as a unique magnetic nano-adsorbent in the presence of MC biopolymer for Reactive Red 198 (RR198) dye removal. The nano-magnetic adsorbent was characterized by FESEM (Field emission scanning electron microscopy), EDS (Energy-dispersive X-ray spectroscopy), Mapping, Linescan, BET (Brunauer–Emmett–Teller), FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-Ray Diffraction), and VSM (Vibrating-Sample magnetometer). For simple separation by external magnetic fields, the Ms value was 57.91 emu/g. According to XRD analysis, the nano-adsorbent maintains its crystal structure, with an average crystal size of 11 nm. The maximum removal efficiencies of RR198 for synthetic and real wastewater samples under optimal conditions (an initial concentration of 10 mg/L, pH 3, contact time of 10 min, nanocomposite dose of 1.5 g/L, and a temperature of 25 °C) were 92.2% and 78%, respectively. The adsorption experiments were fitted well with the Freundlich isotherm (R² = 0.989) and pseudo-second-order kinetic (R² = 0.995). The values of entropy changes (ΔS = 35.087 kJ/mol.k), enthalpy changes (ΔH = -9.862 kJ/mol), and negative Gibbs free energy changes (ΔG) showed that the adsorption process was exothermic. Finally, the reusability findings showed that after six recovery cycles, the efficiency decreased slightly (90.1%). In the end, it can be concluded that the prepared CoFe₂O₄@Methylcellulose/AC can be used as an efficient adsorbent for the removal of RR198 from an aqueous solution.     

The aggregation behavior of O-carboxymethylchitosan in dilute aqueous solution

O-Carboxymethylchitosan (OCMCS) is a kind of biocompatible derivatives of chitosan whose water solubility is strongly dependent on the degree of carboxymethylation. The OCMCS with 100 carboxymethyl groups and 75 amino groups per 100 anhydroglucosamine units of OCMCS was synthesized by the reaction of chitosan and monochloroacetic. When OCMCS was dissolved in water, its solution was neutral and OCMCS behaved like a weak polyanionic polyeclectrolyte because most of carboxylic groups were not dissociated in neutral aqueous solution. The aggregation behavior of OCMCS in aqueous solution was studied by surface tensiometry, steady-state fluorescence spectroscopy and viscometry. The critical aggregation concentration (cac) of OCMCS was determined to be between 0.042 mg/ml and 0.050 mg/ml. The possible aggregation mechanism of OCMCS in water was elucidated.     

Thiocyanate removal from aqueous solution by a synthetic hydrotalcite sol

The use of a chloride-containing synthetic hydrotalcite sol (LDHC) as adsorbent to remove thiocyanate from aqueous solution was investigated. LDHC was prepared by coprecipitation and was characterized by HRTEM, particle size, XRD, and FTIR. The experiments showed that LDHC was particularly effective in removing thiocyanate due to its small particle size and high zeta potential. The adsorption of thiocyanate on LDHC was favored when the initial solution pH was in the range 3-10, though the most effective pH range was between 4.0 and 8.0. The adsorption reached equilibrium within 150 min. The interaction between the surface sites of LDHC and thiocyanate ions may be a combination of both anion exchange and surface complexation. The pseudo-second-order model best described the adsorption kinetics of thiocyanate onto LDHC. The equilibrium isotherm showed that the adsorption of thiocyanate on LDHC was consistent with the Langmuir equation and the saturated adsorption capacity of LDHC for thiocyanate was 98.3 mg/g at 20°C. The regenerated LDHC in FeCl(3) solution can be used repeatedly in adsorption-regeneration cycles. The results showed that LDHC can be used as a new adsorbent for thiocyanate removal from aqueous solution because of its high adsorption capacity and rapid adsorption rate.     

Adsorption removal of methyl violet from aqueous solution by chromium phosphovanadate

An effective adsorbent for methyl violet (MV), chromium phosphovanadate (named as Cr‐PV) nanomaterials, was prepared by a simple coprecipitation strategy. The microstructure and morphology of as‐synthesized Cr‐PV were characterized by SEM, X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR), respectively, which was confirmed as nanosheet shapes. The adsorption behavior for MV from aqueous solutions was systematically investigated. The kinetic and equilibrium results indicate that the adsorption process follows pseudo‐second‐order kinetic model and Langmuir isotherm, respectively. Compared with PV and commercially available activated carbon, Cr‐PV has preferable adsorption property to MV. The maximum adsorption capacity can reach 123.81 mg g^?1 at room temperature. The thermodynamic parameters such as Gibbs free energy (ΔG^ο), enthalpy (ΔH^ο), and entropy change (ΔS^ο) show that the adsorption of MV is an endothermic and spontaneous process. Moreover, the adsorptive behavior between Cr‐PV and MV is monolayer adsorption and electrostatic interaction mechanism. Cr‐PV, as a promising adsorbent with high adsorption capacity and fast adsorption rate, shows great potential for the removal of MV from wastewater.     

Effective removal of anionic dyes from aqueous solutions by novel polyethylenimine-ozone oxidized hydrochar (PEI-OzHC) adsorbent

The adsorption behavior of the anionic dyes Remazol Brilliant Blue R (RBBR) and Reactive Black 5 (RB5) from aqueous solutions by polyethylenimine ozone oxidized hydrochar (PEI-OzHC) was investigated. The adsorption capacities of both dyes increased with functionalization of PEI in the hydrochar adsorbent. The results of surface characterization (FTIR, BET, TGA, elemental analysis, and SEM) showed that PEI modification greatly enhanced the adsorbent surface chemistry with a slight improvement of adsorbent textural properties. In addition, the adsorption kinetics data showed an excellent adsorption efficiency as reflected in the high removal percentages of the anionic dyes. The Isotherm results indicated that RBBR and RB5 dye adsorption occurred via monolayer adsorption, and chemisorption was the rate-controlling step. The PEI-OzHC adsorbent possesses higher maximum Langmuir adsorption capacity towards RBBR (218.3 mg/g) than RB5 (182.7 mg/g). This increase in adsorption capacity is attributed to the higher number of functional groups in RBBR that interact with the adsorbent. This study reveals the potential use of adsorbents derived from pine wood hydrochar in municipal as well as industrial wastewater treatment. Furthermore, surface chemistry modification is proven as an effective strategy to enhance the performance of biomass-derived adsorbents.     

Adsorption and removal of tetracycline antibiotics from aqueous solution by graphene oxide

Significant concerns have been raised over pollution of antibiotics including tetracyclines in aquatic environments in recent years. Graphene oxide (GO) is a potential effective absorbent for tetracycline antibiotics and can be used to remove them from aqueous solution. Tetracycline strongly deposited on the GO surface via π-π interaction and cation-π bonding. The adsorption isotherm fits Langmuir and Temkin models well, and the theoretical maximum of adsorption capacity calculated by Langmuir model is 313 mg g(-1), which is approximately in a close agreement with the measured data. The kinetics of adsorption fits pseudo-second-order model perfectly, and it has a better rate constant of sorption (k), 0.065 g mg(-1) h(-1), than other adsorbents. The adsorption capacities of tetracycline on GO decreased with the increase in pH or Na(+) concentration. The adsorption isotherms of oxytetracycline and doxycycline on GO were discussed and compared.     

The starch modified montmorillonite for the removal of Pb(II), Cd(II) and Ni(II) ions from aqueous solutions

In the present study, we attempted to synthesize a novel sorbent from the starch modified montmorillonite for the removal of Pb(II), Cd(II), and Ni(II) ions from aqueous solutions. Structure and properties of the adsorbent were characterized by Fourier-transformed infrared(FT-IR) spectroscopy, X-ray diffraction (XRD), and Field emission scanning electron microscopic (FE-SEM) techniques. Batch experiments were confirmed through the effect of different conditions including pH, contact time, initial metal concentration and adsorbent dose. Specifically, the optimum value of adsorbent dose was achieved as 20 g/l for the removal of almost metal ions. The adsorption data was fitted with the optimum pH value as 5 for all experiments. The contact time at which the uptake of maximum metal adsorption was observed within 45 min for Pb(II), 90 min for Cd(II), and 60 min for Ni(II). In addition, it was revealed in our study that the equilibrium data obeyed the Langmuir model, and the adsorption kinetic followed a pseudo second-order rate model. Obtained results were noticeable for a modified phyllosilicate adsorbent, and with such a simple and low-cost modification for montmorillonite, the potential of this material as an economical and effective adsorbent for the removal of metal ions from aqueous solution was considerably elevated.     

Dye and its removal from aqueous solution by adsorption: A review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.     

Enhanced removal of U(VI) from aqueous solution by chitosan-modified zeolite

Journal of Radioanalytical and Nuclear Chemistry - A typical type of natural zeolite(Z) modified with chitosan was applied to remove U(VI) from aqueous solution. Batch experiments were performed to...     

Adsorptive removal of uranium from aqueous solution using chitosan-coated attapulgite

Chitosan-coated attapulgite beads were prepared by coating chitosan on naturally and abundantly available attapulgite, and made into spherical beads to adsorb uranium from aqueous solutions. The beads were characterized by SEM, EDS and FT-IR. The characteristics of beads of adsorbing uranium(VI) from aqueous solutions were studied at different conditions of pH, initial uranium concentration, contact time, biomass dosage and temperature. The pseudo-second order rate equation was used to describe the kinetic data, and isotherm data were fitted to Langmuir and Freundlich adsorption models. Thermodynamic parameters (ΔG°, ΔH°, and ΔS°) of the biosorption were also calculated. Thermodynamic parameters of the CAAB, viz., ΔG°(308 K), ΔH°, and ΔS° were determined to be −21.59, 6.29l and 90.51 J/mol K, respectively. The experimental results demonstrate that the beads of chitosan coated onto attapulgite exhibit considerable potential for application in both adsorption and removal of uranium from aqueous solutions.     

Heavy metal removal from aqueous solution by Pseudevernia furfuracea (L.) Zopf

The present study was carried out in a batch system using a lichen (Pseudevernia furfuracea (L.) Zopf) for the sorption of nickel(II) and copper(II) ions from water. Particularly, the effect of pH, contact time and temperature were considered. Pseudevernia furfuracea exhibited nickel(II) and copper(II) uptake of 49.87 and 60.83 mg/g at an initial pH of 4 and 5-6 at 35 degrees C respectively. Both the Freundlich and Langmuir adsorption models were suitable for describing the biosorption of nickel(II) and copper(II) by the biosorbent. Biosorption showed pseudo first order rate kinetics for nickel and copper ions. Using the equilibrium constant values obtained at 25 and 35 degrees C, the thermodynamics properties of the biosorption (deltaG degrees, deltaH degrees and deltaS degrees) were determined. The biosorption of nickel(II) and copper(II) onto Pseudevernia furfuracea was found to be endothermic.     

Copper and zinc removal from aqueous solution by mixed mineral systems II. The role of solution composition and aging

This study investigates Cu and Zn removal onto binary mixed mineral sorbents from simulated wastewater, relevant to streams impacted by acid mine drainage and effluents. Mixed suspensions of kaolinite/montmorillonite and kaolinite/goethite exhibited different sorption behavior from the single mineral components, reducing Cu and Zn removal (except Cu sorbed on montmorillonite/goethite) over the range of pH investigated. Cu and Zn removal by the electrolyzed systems showed a complex response to increased ionic strength, which increased solid concentration, leading to lower Cu and Zn sorption. Enhanced Cu sorption on the montmorillonite/goethite as age increased may be attributed to increased hydroxylation of the mineral surface resulting in the formation of new reactive sites.     

Diglycolamide functionalized multi-walled carbon nanotubes for removal of uranium from aqueous solution by adsorption

Diglycolamide functionalized multi-walled carbon nanotubes (DGA-MWCNTs) were synthesized by sequential chemical reactions for removal of uranium from aqueous solution. Characterization studies were carried out using FT-IR spectroscopy, XRD and SEM analysis. Adsorption of uranium from aqueous solution on this material was studied as a function of nitric acid concentration, adsorbent dose and initial uranium concentration. The uranium adsorption data on DGA-MWCNTs followed the Langmuir and Freundlich adsorption isotherms. The adsorption capacity of DGA-MWCNTs as well as adsorption isotherms and the effect of temperature on uranium ion adsorption were investigated. The standard enthalpy, entropy, and free energy of adsorption of the uranium with DGA-MWCNTs were calculated to be 6.09 kJ mole⁻¹, 0.106 kJ mole⁻¹ K⁻¹ and −25.51 kJ mole⁻¹ respectively at 298K. The results suggest that DGA-MWCNTs can be used as efficient adsorbent for uranium ion removal.     

Copper and zinc removal from aqueous solution by mixed mineral systems I. Reactivity and removal kinetics

This study investigates the reactivity and removal kinetics of Cu and Zn onto mixed mineral systems from aqueous solution related to acid mine drainage impacted areas. The sorbents used were kaolinite, Al-montmorillonite, goethite, and their mixtures. The effects of surface charge, proton coefficient, and sorption kinetics were studied at room temperature (23+/-2 degrees C). Using an empirical model, mineral mixing reduced the exchange of protons for sorbing ions and the acidity of the reactive sites, thus impeding Cu and Zn removal by proton exchange. Based on the amount of Cu and Zn sorbed on the mixed mineral suspensions at ionic strength 0.01 to 0.1 M and pH 4, it is suggested that Cu and Zn removal from aqueous solution was by both inner and outer sphere complexation. Mineral mixing reduced the transfer rate of Cu relative to the single mineral suspensions in both slow and fast reaction phases. The behavior of the mixed suspensions in Cu and Zn sorption suggest that different reactive sites were involved at the onset of sorption, becoming similar to those of the single mineral components over time.     

Role of clay-based membrane for removal of copper from aqueous solution

The present study focuses on the fabrication of polysulfone (PSf)-clay minerals impregnated hybrid membrane for treatment of Cu (II) ions. Blending and phase inversion methods have been employed to develop clay-based membranes by the mixing of bentonite, sepiolite and zeolite in the matrix of PSf. Moreover, characterization of fabricated membranes was carried out using SEM, FTIR, zeta potential, pore size and water contact angle measurement. Adsorption and filtration experiments were conducted to evaluate the permeation performance of the membrane. Obtained results of permeation study reveal that the presence of clay minerals in the matrix of modified membrane not only increases the adsorption and rejection efficiency for Cu (II) but, it also improves the flux of pure water. Among all developed membranes, the membrane prepared by the mixing of zeolite demonstrates the highest adsorption (2.82 mg/g) and rejection value (97%) towards Cu (II) at low pressure (0.5 bar). Regeneration performance results confirm the reusability of membrane up to 3–5 cycles along with 82.5–90% metal recovery. Based on significant metal recovery, clay-based low-cost zeolite/PSf membrane could be used to remove Cu (II) from water at low pressure to replace current conventional membrane.     

Kinetic study of spiramycin removal from aqueous solution using heterogeneous photocatalysis

Spiramycin macrolide antibiotic (SPM) can be photocatalytically degraded on TiO₂ (anatase variety). The experiments are done in a batch reactor and the effect of some key parameters is investigated under low energy of artificial UV light. The reaction rate is affected by varying TiO₂ dose, pH and SPM concentration. Under optimized conditions, a photodegradation efficiency of 98% is achieved and the SPM photodegradation follows pseudo-first order kinetics. The Langmuir–Hinshelwood (L–H) model is successfully used to fit the experimental data, indicating the dependence of the reaction rate on the chemical reaction step. The L–H model led to the determination of both reaction kinetic and adsorption/desorption equilibrium constants. In order to give an overall estimate of the by-products, chemical oxygen demand, total organic carbon, and calculated average oxidation state monitor the photodegradation process.