NMR spectra of salicylohydroxamic acid in DMSO-d6 solution: a DFT study

The ¹H, ¹³C and ¹H, ¹³C COSY NMR spectra of salicylohydroxamic acid (sha) were measured in DMSO-d₆ solution. The B3LYP GIAO method with the 6-311++G(d,p) basis set was chosen to reproduce the experimental spectra. All possible zusammen and entgegen conformers of monomeric sha were computed. After geometry optimisation (B3LYP/6-311++G(d,p)) only nine independent models of the molecule were shown to be stable. Additionally, the NMR chemical shifts of the Onsager model of the most stable monomer were calculated. The computed chemical shifts for the labile protons for all aforementioned geometries meaningfully underestimated experimental results suggesting the existence of the H-bonded structure of sha in DMSO solution. The most probable two dimeric structures along with two solvent-bounded aggregates were subsequently calculated at the same level of theory. The best agreement was obtained for sha H-bonded with two DMSO molecules (confirmed by the absence of concentration effect). The relative error not exceeding 10 and 4% for chemical shifts in ¹H and ¹³C NMR spectra of sha–(DMSO)₂, respectively, showed that the applied method with the B3LYP/6-311++G(d,p) basis set was efficient to predict the NMR shifts of a compound with strong H-bonds. Thus, this allows to assign properly NMR resonances to specific structure formed in DMSO solution.     

Aggregation of acetic and propionic acid in argon matrices--a matrix isolation and computational study

Monomeric acetic acid MA and propionic acid MP were isolated in argon matrices at 10K by using a pulse deposition technique. The dimerization of the monomers was induced by warming the matrices from 10 to 40 K. Under these conditions the diffusion of small trapped molecules is rapid and the dimerization could be monitored directly by IR spectroscopy. Both carboxylic acids form the symmetrical dimers B with two strong C=O...HO hydrogen bridges as the thermodynamically most stable dimers. With acetic acid a less stable dimer AA could be obtained if high concentrations of acetic acid in argon were used during the deposition of the matrix. On annealing this dimer rearranges to the more stable BA. In contrast, propionic acid does not form a corresponding less stable dimer under any experimental condition. These observations are rationalized on the basis of DFT and ab initio calculations.     

pH调控合成溴氧铋纳米片的底物依赖光催化特性

近年来,半导体光催化技术已广泛用于去除水中有机污染物.在各类光催化剂中,具有合适禁带宽度的溴氧铋(BiOBr,2.7 eV)材料吸引了众多研究者兴趣.通常情况下,半导体光催化降解有机污染物性能主要与光催化材料的结构性质,如物相组成、颗粒粒径、材料表面结构等相关.研究已经证实了TiO2光催化降解有机污染物具有底物依赖的特性,但是BiOBr的有机物降解特性与底物性质的关系研究尚未见文献报道.为发展高效的BiOBr太阳光催化污染净化技术,研究有机底物与BiOBr光催化降解性能的关系具有重要意义.本文分别在pH =1和pH =3条件下采用水热法合成了BiOBr纳米片(BOB-1和BOB-3),并通过X射线粉末衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),紫外-可见漫反射(DRS)等技术表征了所制备半导体光催化材料.结果表明,在不同pH条件下均能合成具有高结晶度的四方相BiOBr, BOB-1和BOB-3均由不规则的纳米片组成, BOB-3纳米片宽度大约为0.6–1.5μm,厚度大约27–44 nm,而BOB-1纳米片宽度大约为0.7–2.0μm,厚度大约50 nm.选区电子衍射观察到了BOB-1和BOB-3清晰的晶格条纹,晶格间距为0.20和0.28 nm,分别对应着四方晶系的(020)面和(110)面.选取罗丹明B(RhB)和水杨酸(SA)为典型有机底物分子,研究了BOB-1和BOB-3纳米片的底物依赖光催化特性.结果表明, BOB-1吸附SA和RhB 1 h后,吸附率分别仅为0.2%和0.8%,而BOB-3对SA和RhB的效率分别可达9.1%和12.7%;光催化降解两种底物分子的结果表明, BOB-1和BOB-3降解RhB的速率分别为4.00以及16.10 g·min–1·m2,而降解SA的速率分别为和2.35 g·min–1·m2.可见, BOB-1显示了高效降解SA的能力,而, BOB-3则表现出更强的降解RhB活性.电化学Mott-Schottky和电动电位测试结果表明, BOB-1比BOB-3有更正的价带电位和更低的表面电荷.捕获实验(KI捕获空穴, K2Cr2O7捕获电子,氩气捕获超氧负离子,异丙醇捕获羟基自由基)表明光生空穴与超氧负离子是BOB-3降解RhB的主要活性物种,而BOB-1降解SA主要是光生空穴作用,电子顺磁共振(ESR)测试进一步证实了以上结果.光电流密度测试结果表明,可见光作用下RhB可被激发到RhB*,导致BOB-3的电子空穴对分离效率高;而当电解质中存在SA时,催化剂的表面羟基与SA形成氢键,致使光生电子与空穴分离效果变差,因而光电流减少.本文提出了pH调控合成溴氧铋纳米片的底物依赖光催化降解RhB和SA机理,与BiOBr导带电位、底物分子吸附量、底物分子物理化学性质相关. BOB-1和BOB-3纳米片催化剂在可见光激发下能产生光生导带电子和价带空穴,这些光生载流子可迁移到催化剂表面.染料分子RhB在可见光作用下能发生光敏化作用生成激发态RhB*, RhB*可以将电子注入BOB-3催化剂的导带,导带上的光生电子与RhB*注入电子与吸附在其表面的氧气共同作用生成更多的超氧负离子,从而高效降解RhB.由于BOB-1比BOB-3有更正导带电势,导带电子无法直接还原氧气生成超氧负离子,仅能依靠光生空穴直接氧化RhB,导致BOB-1表现出降解RhB性能弱;对于无色的底物SA,吸附较多SA的BOB-3催化剂上的表面羟基与SA之间形成氢键作用,抑制了光生电子与空穴对的分离,导致BOB-3在可见光光催化降解SA活性弱,而BOB-1表面吸附SA较少,同时BOB-1有更负的价带电位,利用光生空穴与吸附在催化剂表面的SA反应,从而表现出高效降解SA的性能.     

A theoretical study on the inhibition efficiencies of some quinoxalines as corrosion inhibitors of copper in nitric acid

Quantum chemical calculations based on DFT method were performed on three quinoxalines compounds namely ethyl 2-(4-(2-ethoxy-2-oxoethyl)-2-p-tolylquinoxalin-1(4H)-yl)acetate (Q1), 1-[4-acetyl-2-(4-chlorophenyl)quinoxalin-1(4H)-yl]acetone (Q2) and 2-(4-methylphenyl)-1,4-dihydroquinoxaline (Q3), used as corrosion inhibitors for copper in nitric acid media to determine the relationship between the molecular structure of quinoxalines and inhibition efficiency. Quantum chemical parameters such as the highest occupied molecular orbital energy (E_HOMO), the lowest unoccupied molecular orbital energy (E_LUMO), energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (ΔN), and the total energy (TE), were calculated. The theoretically obtained results were found to be consistent with the experimental data reported.     

Unusual cyclization of N-imidazolyl quinone imines with the formation of thiadiazole ring and its subsequent recyclization

2,6-Di-tert-butyl-4-{[2-(2-aryl-2-oxoethylthio)-1H-imidazol-1-yl]imino}cyclohexa-2,5-dien-1-ones under the action of bases give products of the 2,3-dihydroimidazo[2,1-b]thiazol- 3-ol series by subsequent recyclization reaction of the intermediate imidazo[2,1-b][1,3,4]thiadiazoles. The structure of imidazo[2,1-b]thiazol-3-ol is supported by the X-ray diffraction. The features of the cyclization processes of quinone imine derivatives were stimulated by DFT calculations using the wB97XD/6-311++G** method.     

The Molecular and Electronic Structure of Nickelatetrazole – A Theoretical Study

Nickelatetrazoles have been proposed as intermediates in the course of the photoreaction of Ni^II complexes of [NiP₂(N₃)₂] constitution (P₂: mono‐ or diphosphane ligands). However, any metallatetrazoles as well as their organic analogue, 5 H‐carbatetrazole, could neither be prepared nor identified up to now. Based on density functional theory (DFT) calculations, predictions are given concerning the molecular and electronic structure of tetrazoles. While 5 H‐tetrazole is indeed a rather unstable species, metallatetrazole moieties in square‐planar d⁸ transition metal complexes should be experimentally accessible.     

Kinetic control wins out over thermodynamic control in Friedel-Crafts acyl rearrangements

1,5-, 1,8- and 9,10-diacetylanthracenes undergo Friedel-Crafts acyl rearrangements in polyphosphoric acid at 130-150 °C to give 3-methylbenz[de]anthracen-1-one via the kinetically-controlled 1,9-diacetylanthracene. The rearrangement mechanism is supported by DFT calculations of diacetylanthracenes, their σ-complexes, O-protonates, and O,O-diprotonates. The importance of kinetic control versus thermodynamic control in Friedel-Crafts acyl rearrangements is highlighted. Certain features of reversibility are also suggested.     

Theoretical investigation of the tautomerism of isoorotic acid in gaseous and aqueous phases

In the present investigation, the tautomeric and conformational equilibrium of isoorotic acid have been studied using Møller–Plesset second‐order (MP2) and density functional theory (DFT) methods in the gas phase and aqueous solution (ε = 78.5) using the IPCM model. The relative energies of these tautomers have been calculated at the two levels of theory using 6‐311++G** basis set. Energetics and relative stabilities of the tautomers were compared and analyzed in both the gaseous and aqueous phases. The results indicate that the diketo tautomer (iso) is the most stable form in the gas phase and water. The carboxylic substitution in the uracil ring does not alter its relative stability order of the tautomers. The proton affinity of the oxygen atoms and the deprotonation enthalpy of the NH bonds of isoorotic acid have been compared with recent data of uracil. The relative stability of both syn‐ and anti‐conformations was investigated and the syn form was found to be more stable by 17.65 kcal/mol. It was determined in ab initio calculations that an electron can attach to isoorotic acid, forming a stable anion better than uracil. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

The direct conversion of carbamates to ureas using aluminum amides

The conversion of carbamates into ureas using aluminum amide complexes is reported. This reaction is a convenient method to prepare bi-, tri- and tetra-substituted ureas from carbamate-protected primary or secondary amines by reaction with primary or secondary amines in the presence of stoichometric quantities of trimethylaluminum. A reactivity trend of the various carbamates was observed and methyl and benzyl carbamates were reacted selectively in the presence of t-butyl carbamates.     

A Theoretical Study of the Reductive Elimination of CH3EH3 from cis‐[Pt(CH3)(EH3)(PH3)2] (E = Si,Ge) in the Presence of Acetylene

The reaction mechanism of the elimination of CH₃EH₃ from the platinum complexes cis‐[Pt(CH₃) · (EH₃)(PH₃)₂] (E = Si, Ge) in the presence of acetylene has been studied using gradient‐corrected DFT calculations at the B3LYP level. The reaction proceeds in two steps. The first step is the formation of the acetylene complex [Pt(CH₃)(HCCH)(EH₃)(PH₃)] which occurs in a associative/dissociate pathway via the five‐coordinated intermediate [Pt(CH₃)(HCCH)(EH₃)(PH₃)₂]. The rate‐determining step is the elimination of CH₃EH₃ via a four‐coordinated transition state. The alternative mechanism via direct dissociation from the five‐coordinated intermediates has higher activation barriers. The calculated activation energies of the model reactions are in good agreement with experimental results. The silyl complex has a lower barrier for the elimination reaction than the germyl complex. The calculated transition states show that the reason for the lower barrier is the strength of the nascending C–Si bond, which is higher than the C–Ge bond. The results are in agreement with the postulated mechanism of Ozawa et al. (Organometallics, 1998 , 17, 1018).     

Near‐Infrared Fluorescent Probe with New Recognition Moiety for Specific Detection of Tyrosinase Activity: Design,Synthesis, and Application in Living Cells and Zebrafish

Fluorescence imaging of tyrosinase (a cancer biomarker) in living organisms is of great importance for biological studies. However, selective detection of tyrosinase remains a great challenge because current fluorescent probes that contain the 4‐hydroxyphenyl moiety show similar fluorescence responses to both tyrosinase and some reactive oxygen species (ROS), thereby suffering from ROS interference. Herein, a new tyrosinase‐recognition 3‐hydroxybenzyloxy moiety, which exhibits distinct fluorescence responses for tyrosinase and ROS, is proposed. Using the recognition moiety, we develop a near‐infrared fluorescence probe for tyrosinase activity, which effectively eliminates the interference from ROS. The high specificity of the probe was demonstrated by imaging and detecting endogenous tyrosinase activity in live cells and zebrafish and further validated by an enzyme‐linked immunosorbent assay. The probe is expected to be useful for the accurate detection of tyrosinase in complex biosystems.     

Preparation and Characterization of Pure Thiosulfuric Acid

Pure thiosulfuric acid has not been prepared yet, although it is described in most textbooks of inorganic chemistry. Furthermore, no experimental evidence for the structure of thiosulfuric acid is known. Theoretical calculations predict the (SH)(OH) tautomer to be more stable than the (OH)(OH) tautomer. In this work we present the synthesis and spectroscopical characterization of pure thiosulfuric acid. X₂S₂O₃ (X = H, D) was obtained from the reaction of dry Na₂S₂O₃ with anhydrous HF at –60 °C. The experimental vibrational and NMR spectra together with quantum chemical calculations provide evidence for the predicted (SH)(OH) tautomeric structure.     

Lewis Acidity of Carbon in Activated Carbonyl Group vs. B(C6F5)3 for Metal-Free Catalysis of Hydrogenation of Carbonyl Compounds

In this work, using DFT calculations, we investigated Lewis acidities of carbon (in activated carbonyl group) in comparison to the B(C₆F₅)₃ in combination with dioxane as the Lewis base (LB) for metal-free catalysis of heterolytic H₂ splitting and hydrogenation of carbonyl compounds. We found that in case of carbon as the Lewis acid (LA) the reaction is controlled by frontier molecular orbital interactions between the H₂ and LA-LB fragments at shorter distances. The steric effects can be reduced by electrophilic substitutions on the carbonyl carbon. Synergic combination between stronger orbital interactions and reduced steric effects can lower the barrier of the H₂ splitting below 10 kcal/mol. With the B(C₆F₅)₃, the H₂ splitting is controlled by electrostatic interactions, which cause to form an early transition state. An advantage of employing Lewis acidity of the activated carbonyl carbon for hydrogenation is that the hydride-type attack and hydrogenation of the C=O bond occur in a single step throughout H₂ splitting. Hence, stronger Lewis acidity of the C(C=O) reinforces hydrogenation without prohibition of the hydride delivery.     

Phospholenes from Phosphabenzenes by Selective Ring Contraction

A 3-amino-functionalized phosphabenzene (phosphinine) has been synthesized and structurally characterized. The pyramidalized nitrogen atom of the dimethylamino substituent indicates only a weak interaction between the lone pair of the nitrogen atom and the aromatic phosphorus heterocycle, resulting in somewhat basic character. It turned out that the amino group can indeed be protonated by HCl. In contrast to pyridines, however, the phosphabenzene-ammonium salt undergoes a selective ring contraction to form a hydroxylphospholene oxide in the presence of additional water. Based on deuterium labeling experiments and quantum chemical calculations, a rational mechanism for this hitherto unknown conversion is proposed.     

Highly Fluorescent Dyes Containing Conformationally Restrained Pyrazolylpyrene (Pyrazoolympicene) Chromophore

The triflic-acid-promoted cyclization of 1-phenyl-3-(pyren-1-yl)-1H-pyrazole-4-carbaldehyde afforded a mixture of 9-phenyl-7,9-dihydropyreno (10,1-fg)indazole and 9-phenylpyreno(10,1-fg)indazole-7(9H)-one, readily separable by column chromatography. Both products contained a rigid six-ringed pyrazoolympicene backbone and exhibited bright fluorescence in chloroform solution and a weak fluorescence in the solid state. DFT and TD DFT calculations revealed that the lowest excited state (S₁) of these compounds is populated via HOMO →LUMO π-π * transition. Furthermore, the synthesized compounds behaved as weak bases and their emission spectra showed substantial changes upon protonation. Therefore, they may be of interest for sensing of strongly acidic fluorophore environments.     

V16N1.5: Metastable or Missing in the Binary Phase Diagram?

The stability of V₁₆N_1.5 was investigated by experiments and density functional calculations. Three synthetic approaches besides the classical reaction of vanadium with flowing ammonia were evaluated: (i) The ammonolysis of β‐V₂H, (ii) the reaction of vanadium and δ‐VN at elevated temperatures in sealed ampoules, and (iii) the thermal decomposition of δ‐VN in dynamic vacuum at high temperatures. However, none of them was suitable to provide single phase V₁₆N_1.5 yet. The results achieved by experiments and by simulations both indicate an absence of significant homogeneity range for V₁₆N_1.5. The high‐temperature experiments suggest a strongly enhanced thermal stability for V₁₆N_1.5 than reported in literature, suggesting V₁₆N_1.5 to represent a thermodynamically stable compound rather than being metastable. Temperature dependent powder X‐ray diffraction proves stability of V₁₆N_1.5 up to 700 °C. During a thermal analysis experiment in argon V₁₆N_1.5 was still observed after 24 h at 1300 °C. Consequently, first‐principle calculations of the thermodynamic properties of V₁₆N_1.5 revealed an endothermal decomposition to V and β‐V₂N.     

ISOMERIZATION OF 2-PHOSPHA-4-SILA-BICYCLO[1.1.0]BUTANE

In analogy with the valence isomerism of the hydrocarbons bicyclobutane, 1,3-butadiene and cyclobutene, the rearrangements for 2-phospha-4-sila-bicyclo[1.1.0]butane were studied at the B3LYP/6-311+G** G**basis set was employed throughout for the geometry optimizations. First and second order energy derivatives were computed to confirm the nature of the minima and transition structures. Intrinsic reaction coordinate calculations (IRC) were performed to establish connections between transition structures and minima. level of theory. The monocyclic 1,2-dihydro-1,2-phosphasilete is shown to be the thermodynamically preferred product, in contrast to the isomerism of the hydrocarbons that favors the 1,3-butadiene structure.     

Aromaticity or non aromaticity in germanazenes? Theoretical studies on germanazenes, the N-cyano analogs and their carbodiimide isomers

Theoretical studies of germanazene rings [(Ge_II-NR)_2,3; R = H, Me, CN, Ph] have been performed at the DFT/B3LYP level. The fully optimized geometrical structures display four or six-membered planar rings of alternating germanium and nitrogen, in good agreement with the available X-ray experimental data. The hypothetical molecule (GeN-H)₂ presents only a small distortion from planarity. Although the planar conformation could indicate some degree of delocalization, the stabilization energy - estimated using the concept of homodesmotic reactions - indicates very little or no aromatic character in these molecules. The easy experimental formation of these germanazenes can be explained by di- (or tri-)merisation of the transient monomeric germylene-imine GeNR in its triplet state. When R = CN, in conformity with the experimental results, the most stable species is the isomeric carbodiimide form (GeNCN)_n, a result which is easily explained by the maximum spin density on the terminal nitrogen in the calculated monomer.     

(Ph4P)2[Be2F6]·2CH3CN: Synthese,Schwingungsspektrum, Kristallstruktur und quantenchemische Rechnungen

(Ph₄P)₂[Be₂F₆]·2CH₃CN: Synthesis, IR Spectra, Crystal Structure, and Quantum Chemical Calculations The hexafluorodiberyllate (Ph₄P)₂[Be₂F₆]·2CH₃CN ( 1 ) was prepared by the reaction of (Ph₄P)₂[Be₂Cl₆] with excess silver(I) fluoride in acetonitrile solution. According to the IR spectra and to the X‐ray crystal structure determination, 1 contains isolated [Be₂F₆]^2? ions of symmetry C_i, which is very close to symmetry D_2h. 1 crystallizes triclinically in space group with one formula unit per unit cell. Lattice dimensions at 193 K: a = 950.5(2), b = 1016.1(2), c = 1305.2(2) pm, α = 101.04(2)°, β = 110.83(2)°, γ = 96.85(2)°, R₁ = 0.0354. DFT (BP86) and ab initio (CCSD(T)) calculations with large basis sets provide the picture of an intrinsically unstable molecule stabilized by solvent and solid state effects.