Palladium‐catalyzed carbonylation of quaternary ammonium halides to tertiary amides

Catalytic carbonylation of quaternary ammonium salts under anhydrous conditions was investigated using palladium catalyst. The carbonylation of tetramethylammonium iodide was chosen as a model reaction and studied systematically. Ligand‐free PdCl₂ showed efficient catalytic performance for this transformation. A palladium catalyst loading as low as 0.05 mol% was sufficient for high yield (96.9%) of N,N‐dimethylacetamide, corresponding to a turnover frequency of 242 h^?1. Under optimum conditions, several other quaternary ammonium halides were also carbonylated to corresponding tertiary amides in moderate to excellent yields. The catalytic activity of commercial palladium on activated carbon (Pd/C) catalyst was also evaluated. The Pd/C catalyst exhibited high activity for this carbonylation reaction and could be recycled six times with a slight decrease in activity. Furthermore, mechanistic considerations concerning Pd‐catalyzed carbonylation of quaternary ammonium halides were also discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Rapid Suzuki‐Miyaura cross‐coupling reaction catalyzed by zirconium carboxyphosphonate supported mixed valent Pd(0)/Pd(II) catalyst

Mixed valent Pd(0)/Pd(II) nano‐sized aggregates supported onto a chemically robust layered zirconium carboxyphosphonate framework is prepared and its catalytic activity in Suzuki‐Miyaura cross coupling reaction is explored. The exceptionally high catalytic efficacy of the heterogeneous catalyst in Suzuki‐Miyaura cross coupling reaction is signified by remarkably short reaction time 2 minutes and high turnover frequency of 1.3 x 10⁴ hr^?1. The catalyst can be recycled several times without significant loss of catalytic efficacy, while spectroscopic, structural and microscopic investigations suggest the integrity of the catalyst even after fifth catalytic cycle. The unique ability of the zirconium carboxyphosphonate framework to interact strongly with palladium in dual Pd(0)/Pd(II) oxidation states has been attributed to this remarkable augmentation of catalytic efficacy.     

Amendment of palladium nanocubes with iron oxide nanowires for boosted formic acid electro−oxidation

To quickly move the formic acid (FA) fuel cells closer to a real commercialization, an inexpensive, efficient, and durable electrocatalyst for the direct FA electro-oxidation (FAEO) was developed. This involved a sequential modification of a glassy carbon (GC) substrate with palladium nanocubes (ca. 70 nm, nano-Pd) and iron oxide nanowires (nano-FeO_x, ca. 40 nm and 150 nm in average diameter and length, respectively). The deposition sequence and loading level of nano-FeO_x in the catalyst were optimized to minimize the catalyst's poisoning with CO that might probably release from a parallel dehydration of FA or from CO₂ reduction. Surprisingly, the FeO_x/Pd/GC catalyst exhibited a high (21.6 mA cm^?2) specific activity for FAEO, which denoted ca. 7 times that of the “pristine” Pd/GC catalyst. This was synchronized with a better (up to fivefold increase in turnover frequency) “long-termed” stability that extended for 90 min of continuous electrolysis at room temperature. A successful effort was dedicated to improving more the catalyst's stability by activating the catalyst electrochemically at –0.5 V vs Ag/AgCl/KCl (sat.) in 0.2 mol L^?1 NaOH. The CO stripping agreed perfectly with the impedance analysis in appending the observed enhancement in the catalytic efficiency of FAEO to a favorable electronic modulation at the Pd surface that boosted the oxidative desorption of poisoning CO species at a lower potential.     

Suzuki–Miyaura cross-coupling reaction assisted by palladium nanoparticles-decorated zeolite 13X nanocomposite: a greener approach

Heterogeneous catalysts govern the field of catalysis due to their easy separation from a reaction mixture, reusability, and prevention of agglomeration, making them more efficient catalysts than homogeneous catalysts. Herein, we report the eco-friendly synthesis of a novel heterogeneous catalyst, viz. palladium nanoparticles (Pd NPs) decorated over zeolite 13X nanocomposite using dried fruits of Terminalia chebula Retz. as the reducing and stabilizing agent and its performance as a promising catalyst for the Suzuki–Miyaura coupling reactions. The particle size, crystallinity, morphology, and textural properties of the catalyst were identified using Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HR-TEM), thermal gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) analysis which confirmed the presence of palladium nanoparticles on the surface of zeolite 13X. The FESEM images revealed the presence of spherical-shaped Pd NPs over the cubical particles of zeolite 13X. The average particle size of the palladium nanoparticles was found to be in the range of 6–7 nm and was polycrystalline in nature. From BET analysis, it was inferred that the decoration of Pd NPs decreased the surface area of zeolite 13X (615.5 m²/g to 548.334 m²/g), thus leaving pores unoccupied. This study showed the efficiency of this novel catalyst in the formation of biaryl derivatives using low palladium loadings (0.0012 mol%) giving good to excellent yields (90–99%) within short reaction times (10–225 min) with high TONs (>?79,000) and TOFs (>?21,000). Both electron-donating and electron-withdrawing aryl halides and aryl boronic acids reacted smoothly in the presence of K₂CO₃ as a base and EtOH/H₂O (1:1) as the solvent. Besides, the catalyst could be recycled and reused for 5 consecutive runs with minimal loss of its efficiency. The supremacy of this catalyst could well be exploited in future for various organic transformations.

Graphical abstract

     

Studies on the Synthesis and Characterization of Pd?TiO2?SiO2 Nanocomposite for Electroanalytical Applications

A nanocomposite of Pd? TiO₂? SiO₂ is developed through a sol‐gel process from the reaction products of titanium isopropoxide followed by mixing the same with palladium linked 3‐glycidoxypropyltrimethoxysilane. The reaction product is sonicated and calcinated to obtain the nanocomposite of Pd? TiO₂? SiO₂. The calcination at 600 °C yielded an amorphous structure whereas at 900 °C it resulted into a nanocrystalline structure. The nanocomposite of palladium was further characterized by TEM, XRD, IR and EDS. The material acts as an efficient electrocatalyst. Electrocatalysis of ascorbic acid is observed at 0.1 V vs. Ag/AgCl, shows linearity between 1 µM and 1 mM in 0.1 M phosphate buffer (pH 7.0).     

Synthesis of highly dispersed Pd/C electro-catalyst with high activity for formic acid oxidation

In this study, we present a simple process to obtain highly dispersed palladium nanoparticles on Vulcan XC-72R carbon support without any protective agent. To obtain high metal loading Pd/C catalyst without any surfactant, we modified the polyol process by employing NH₃ species as a mediation to control the reaction pathway to avoid the precipitation of Pd(OH)₂, and hence the agglomeration of Pd nanoparticles. The obtained Pd/C sample was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM) techniques. The results show that highly dispersed Pd/C catalyst with an average diameter of 3.0 nm could be obtained in this novel process. The activity of formic acid oxidation on this Pd/C catalyst was examined via cyclic voltammetry technique and it is found that the catalytic activity is greatly enhanced due to the reduced particle size and the improved dispersion of palladium nanoparticles on the carbon surface.     

Preparation and catalytic properties of NR-stabilized palladium colloids

Palladium colloids revealing narrow particle size distributions can be obtained by chemical reduction using tetra–alkylammonium hydrotriorganoborates. Combining the stabilizing agent [NR] with the reducing agent [BEt₃H^?] provides a high concentration of the protecting group at the reduction centre. Alternatively, NR₄X (X = halogen) may be coupled to the metal salt prior to the reduction step: addition of N(octyl)₄Br to Pd(ac)₂ in THF, for example, evokes an active interaction between the stabilizing agent and the metal salt. Reduction of NR-stabilized palladium salts with simple reducing agents such as hydrogen at room temperature yields stable palladium organosols which may be isolated in the form of redispersible powders. The anion of the palladium salt is crucial for the success of the colloid synthesis. Electron microscopy shows that the mean particle size ranges between 1.8 and 4.0 nm. An X–ray–photoelectron spectrscopic examination demonstrated the presence of zerovalent palladium. These palladium colloids may serve as both homogeneous and heterogeneous hydrogenation catalysts. Adsorption of the colloids onto industrially important supports can be achieved without agglomeration of palladium particles. The standard activity of a charcoal catalyst containing 5% of colloidal palladium determined through the cinnamic acid standard test was found to exceed considerably the activity of the conventional technical catalysts. In addition, the lifespan of the catalyst containing a palladium colloid, isolated from the reduction of [N(octyl)₄]₂PdCl₂Br₂ with hydrogen, is superior to conventionally prepared palladium/charcoal (Pd/C) catalysts. For example, the activity of a conventional Pd/C catalyst is completely suppressed after 38×10³ catalytic cycles per Pd atom, whereas the colloidal Pd/C catalyst shows activity even after 96times;10³ catalytic cycles.     

Xantphos-ligated palladium dithiolates: An unprecedented and convenient catalyst for the carbonylative Suzuki–Miyaura cross-coupling reaction with high turnover number and turnover frequency

Xantphos- and dithiolate-ligated macrocyclic palladium complexes as an efficient and stable catalyst for the carbonylative Suzuki–Miyaura cross-coupling reaction have been synthesized. The catalysts were characterized by ¹H-nuclear magnetic resonance (NMR), CHNS (carbon, hydrogen, nitrogen, and sulfur) analysis, melting point analysis, and ³¹P-NMR spectroscopy. Several sensitive functional groups (e.g., –NO₂, –F, –Cl, –Br, –NH₂, and –CN) on the aromatic ring were well tolerated in the carbonylative Suzuki–Miyaura coupling reaction. The present palladium complexes produce six times higher turnover number (TON) and five times higher turnover frequency (TOF) compared with conventional homogeneous palladium precursors. Maximum TONs in the range of 10⁵ to 10⁶ and TOF in the range of 10⁴ to 10⁵ could be generated by a very low amount of catalyst loading (10^–5 mol%).     

Characterization of Pd/TiO2 embedded in multi-walled carbon nanotube catalyst with a high photocatalytic activity

Pd particles loading on TiO₂-embedded multi-walled carbon nanotubes (MWCNTs), MWCNTs, and TiO₂ particles were prepared via an impregnation method with palladium(II) chlorate solution followed by heat treatment at high temperature. To characterize the catalysts, BET surface area, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray, Fourier transform infrared spectroscopy and ultraviolet-visible spectroscopy were employed. The prepared catalysts were tested in degradation of methyl orange under visible light. Pd/TiO₂-MWCNTs catalyst demonstrates the highest photocatalytic activity, and the phase transformation from PdO to Pd0 phase takes place at heat treatment of embedded TiO₂. The nanoparticles size of TiO₂ can be decreased by introduction of MWCNTs species. Combining structural characterization with kinetic study results we could conclude that the superior catalytic performance could arise due to the Pd/TiO₂-MWCNTs catalyst’s structure.     

Effect of inorganic oxide supports on the activity of chromium‐based catalysts in ethylene trimerization

Novel heterogeneous catalysts were prepared using immobilization of bis(2‐decylsulfanylethyl)amine–CrCl₃ (Cr‐SNS‐D) on various supports, namely commercial TiO₂, Al₂O₃ and magnetic Fe₃O₄@SiO₂ nanoparticles, to yield solid catalysts denoted as support@Cr‐SNS‐D. The structure of the catalysts was confirmed on the basis of spectroscopic analyses, N₂ adsorption–desorption and inductively coupled plasma (ICP) analysis. The surface areas of Al₂O₃@Cr‐SNS‐D, Fe₃O₄@SiO₂@Cr‐SNS‐D and TiO₂@Cr‐SNS‐D catalysts were determined to be 70, 23 and 41 m² g^?1, respectively. A decrease in surface area from that of the supports clearly establishes accurate immobilization of Cr‐SNS‐D catalyst on the surface of the parent carriers. The loading of Cr was determined to be 0.02, 0.16 and 0.11 mmol g^?1 for Cr‐SNS‐D supported on TiO₂, Al₂O₃ and Fe₃O₄@SiO₂, respectively, using ICP analysis. After preparation and full characterization of the catalysts, ethylene trimerization reaction was accomplished in 40 ml of dry toluene, at 80°C and 25 bar ethylene pressure and in the presence of methylaluminoxane (Al/Cr = 700) within 30 min. The supported chromium catalysts were found to be efficient and selective for the ethylene trimerization reaction. The highest activity (74 650 g_1‐hexene g_Cr^?1 h^?1), as well as no polyethylene formation during reaction processes, was observed when TiO₂ was used as the catalyst support.     

Selective Hydrogenation of Citral over a Carbon‐titania Composite Supported Palladium Catalyst

A novel carbon‐titania composite material, C/TiO₂, has been prepared by growing carbon nanofibers (CNFs) on TiO₂ surface via methane decomposition using Ni‐Cu as a catalyst. The C/TiO₂ was used for preparing supported palladium catalyst, Pd/C/TiO₂. The support and Pd/C/TiO₂ catalyst were characterized by BET, SEM, XRD and TG‐DTG. Its catalytic performance was evaluated in selective hydrogenation of citral to citronellal, and compared with that of activated carbon supported Pd catalyst. It was found that the Pd/C/TiO₂ catalyst contains 97% of mesopores. And it exhibited 88% of selectivity to citronellal at citral conversion of 90% in citral hydrogenation, which was much higher than that of activated carbon supported Pd catalyst. This result may be attributed to elimination of internal diffusion limitations, which were significant in activated carbon supported Pd catalyst, due to its microporous structure.     

Synthesis and comparative study of catalytic activity between Pd-metallodendrimer and Pd/Cu-bimetallodendrimer nanoparticle-based on triazine

Triazine-based heterogeneous Pd/Cu-bimetallodendrimer Nanoparticle (Pd/Cu-BMDNP) has been synthesized by sequential loading method from palladium containing metallodendrimer (Pd-MD) which was prepared by the reaction of 2,4,6-Triamine-1,3,5-triazine (melamine) with substituted benzoyl chloride using (Ph₃P)₂PdCl₂ in DMSO at 90 °C. SEM and EDX of Pd/Cu-BMDNP showed the nanosized aggregated spherical surface morphology and the presence of Palladium and copper of the NP. Also, the phase was detected as Face Centered Cubic (FCC) structure by XRD analysis. In addition, the average particle size of Pd/Cu bimetallic catalyst was identified as 12–13 nm by TEM investigation. Greater thermal stability of Pd/Cu-BMDNP than Pd-MD was detected from TG and DSC experiments. The Pd-metallodendrimer has been also characterized by IR, ¹H NMR, ¹³C NMR, SEM, EDX, Mass, TG and DSC techniques. The simple recoverability, high reusability, low amount of catalyst loading, negligible amount of catalyst leaching of the heterogeneous Pd/Cu-BMDNP have made more effective catalyst than homogeneous Pd-metallodendrimer for the C–C cross-coupling reaction such as Heck, Glaser, Sonogashira and Suzuki-Miyaura in excellent yields.     

An efficient and simple ligand from phthalandione for palladium-catalyzed Suzuki reaction in aqueous media

An efficient and simple ligand derived from phthalandione was used for palladium catalyzed Suzuki coupling reaction in water/ethanol (V/V = 2/1) under aerobic conditions. The reaction exhibited a high catalytic efficiency even with lower Pd loading (0.002 mol %). In this work, the catalyst could be successfully used in coupling reaction between various aryl halides with phenylboronic acid in excellent yields with high turnover number (TON) (the maximal TON was up to 49,000 for the reaction of bromobenzene with phenylboronic acid). Moreover, this new ligand had been elucidated by ¹H NMR, ¹³C NMR and X-ray crystal diffraction.     

Palladium Single Atoms on TiO2 as a Photocatalytic Sensing Platform for Analyzing the Organophosphorus Pesticide Chlorpyrifos

Traditional methods for analyzing organophosphorus pesticide chlorpyrifos, usually require the tedious sample pretreatment and sophisticated bio‐interfaces, leading to the difficulty for real‐time analysis. Herein, we use palladium single‐atom (PdSA)/TiO₂ as a photocatalytic sensing platform to directly detect chlorpyrifos with high sensitivity and selectivity. PdSA/TiO₂, prepared by an in situ photocatalytic reduction of PdCl₄^2? on the TiO₂, shows much higher photocatalytic activity (10 mol g^?1 h^?1) for hydrogen evolution reaction than Pd nanoparticles (1.95 mol g^?1 h^?1), and excellent stability. In the presence of chlorpyrifos, the photocatalytic activity of PdSA/TiO₂ decreases. Through this inhibition effect the platform can realize a detection limit for chlorpyrifos of 0.01 ng mL^?1, much lower than the maximum residue limit (10 ppb) permitted by the U.S. Environmental Protection Agency.     

Simple Electrodeposition of Dendritic Pd Without Supporting Electrolyte and Its Electrocatalytic Activity Toward Oxygen Reduction and H2O2 Sensing

Metallic palladium (Pd) electrocatalysts for oxygen reduction and hydrogen peroxide (H₂O₂) oxidation/reduction are prepared via electroplating on a gold metal substrate from dilute (5 to 50 mM) aqueous K₂PdCl₄ solution. The best Pd catalyst layer possessing dendritic nanostructures is formed on the Au substrate surface from 50 mM Pd precursor solution (denoted as Pd‐50) without any additional salt, acid or Pd templating chemical species. The Pd‐50 consisted of nanostructured dendrites of polycrystalline Pd metal and micropores within the dendrites which provide high catalyst surface area and further facilitate reactant mass transport to the catalyst surface. The electrocatalytic activity of Pd‐50 proved to be better than that of a commercial Pt (Pt/C) in terms of lower overpotential for the onset and half‐wave potentials and a greater number of electrons (n) transferred. Furthermore, amperometric i–t curves of Pd‐50 for H₂O₂ electrochemical reaction show high sensitivities (822.2 and ?851.9 µA mM^?1 cm^?2) and low detection limits (1.1 and 7.91 µM) based on H₂O₂ oxidation H₂O₂ reduction, respectively, along with a fast response (<1 s).     

Converting red mud wastes into mesoporous ZSM-5 decorated with TiO2 as an eco-friendly and efficient adsorbent-photocatalyst for dyes removal

Red mud wastes have been converted into mesoporous zeolite socony mobile-5 (ZSM-5) followed by deposited titanium dioxide (TiO₂) nanoparticles to generate synergy adsorption-photodegradation for removal of dye removal in waste water. The amount of TiO₂ loading was varied to achieve optimum photocatalytic activity while maintaining the mesoporosity and high surface area of ZSM-5. Sol-gel method facilitated the formation of anatase TiO₂ on the ZSM-5. The fourier transform infrared spectra clarified the formation of Si–O–Ti at 957 cm^?1 by the exchanging the hydrogen ion with titanium ion, which proved by decreasing the absorption band of Si–OH and Si–O interaction at 964 and 944 cm^?1, respectively. Sol-gel method also preserved the mesopore diameter of ZSM-5 at 3.5 nm which allow the diffusion of methylene blue (MB) molecules into the pores. However, the surface area and the pore volume were slightly reduced with increasing the TiO₂ loading. The adsorption performance of samples showed that the increasing in the TiO₂ loading led to the decreasing in the adsorption capacity. All samples showed the suitability towards the pseudo second order kinetic. The Langmuir isotherm was suitable to describe the adsorption mechanism by monolayer adsorption. Mesoporosity of ZSM-5 accelerated the adsorption of dye via the increase of mass transfer in the pore channel which confirmed by the low intercept of intraparticle diffusion model at the first stage. The photocatalytic test showed that 10% TiO₂ loading on the ZSM-5 exhibited the highest methylene blue removal followed by 5% and 20% TiO₂ loading. Optimization on the amount of photocatalyst and the pH of solution indicated the reaction favoured 1 g L^?1 of catalysts and at alkaline pH. 10% TiO₂/ZSM-5 also exhibited high stability and reusability up to four reaction cycles. Photocatalytic performance of 10% TiO₂/ZSM-5 was further investigated on photodegradation of malachite green and rhodamine B organic dyes, which showed the photocatalytic efficiency of 73 and 88%, respectively. Superoxide radical, hydroxyl radical, and photogenerated electron were identified as the main active species for MB photodegradation based on the reduction of degradation rate following the addition scavenger molecules.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.     

Impact of palladium silicide formation on the catalytic properties of Pd/SiO2 catalysts in liquid-phase semihydrogenation of phenylacetylene

In this study, palladium silicide was formed on the sol–gel derived SiO₂ supported Pd catalysts when they were prepared by ion-exchange method using Pd(NH₃)₄Cl₂ as a palladium precursor. No other palladium phases (PdO or Pd⁰) were evident after calcinations at 450 °C for 3 h. The Pd/SiO₂ catalysts with Pd silicide formation were found to exhibit superior performance than commercial SiO₂ supported ones in liquid-phase semihydrogenation of phenylacetylene. From XPS results, the binding energy of Pd 3d of palladium silicide on the Pd/SiO₂ catalyst shifted toward larger binging energy, indicating that Pd is electron deficient. This could probably result in an inhibition of a product styrene on the Pd surface and hence high styrene selectivities were obtained at high phenylacetylene conversions. The formation of Pd silicide, however, did not have much impact on specific activity of the Pd catalysts since the TOFs were quite similar among the various catalysts with or without palladium silicides if their average particle sizes were large enough. The TOFs decreased by an order of magnitude when palladium dispersion was very high and their average particle sizes were smaller than 3–5 nm.     

Pd/CNT Catalysts for Glycerol Electro‐oxidation: Effect of Pd Loading on Production of Valuable Chemical Products

Glycerol (C₃H₈O₃), a waste product of biodiesel, is considered as a suitable substrate for electro‐oxidation process to generate high value‐added products. A suitable active catalyst could improve the yield of desirable organic compounds from electro‐oxidation of glycerol. In this work, palladium nanoparticles supported over activated multi‐walled carbon nanotubes (MWCNTs) with varying loadings of 5 %–40 % were prepared using chemical reduction method and used to study their potential for electro‐oxidation of glycerol to produce various high value‐added products. The catalysts were characterized by different physicochemical methods, such as X‐ray diffraction (XRD), N₂ adsorption‐desorption, and Transmission electron microscopy (TEM), whereas the electro‐oxidation activity of the catalysts was analysed using cyclic voltammetry (CV) and chronoamperometry (CA), and the products were identified by high performance liquid chromatography (HPLC). The electrochemical surface area (S_ESA) and mass activity (MA) were increased from 176.98 m² g^?1 to 282.29 m² g^?1 and 12.22 mA mg^?1 to 49.53 mA mg^?1 by increasing the Pd‐loading from 5 % to 20 %, respectively. While the further increase to 40 % Pd loading, the S_ESA and MA values decreased to 231.45 m² g^?1 and 47.63 mA mg^?1respectively. The results found that the optimum 20 % Pd‐loading showed the excellent electrochemical properties due to uniform distribution of Pd‐metal particles over MWCNTs. High performance liquid chromatography (HPLC) showed the tartronic acid, glyceric acid and glyceraldehyde as dominant products. Mechanism of the reaction has also been proposed based on product distribution.     

Microwave-assisted Suzuki reaction catalyzed by Pd(0)-PVP nanoparticles

Suzuki cross-coupling reaction was successfully carried out in ethanol utilizing a palladium colloidal solution stabilized by polyvinylpyrrolidone (PVP). High isolated yields (75-97%) to biaryls were obtained using different bases, aryl halides, and aryl boronic acids with a small loading of the palladium catalyst. Pd(0)-PVP nanoparticles with 3-6 nm of medium diameter were prepared from Pd(OAc)₂ in the presence of the stabilizer PVP using methanol as the reducing agent.