一个Yb8簇合物的合成、结构及CO2催化转化性质

使用多齿席夫碱配体H₂L与Yb(acac)₃·2H₂O反应,设计并通过溶剂热法合成了一例结构新颖的八核镱簇合物[Yb₈(acac)₄(HL)₄(L)₂(μ₃-O)₄(C₂H₅O)₄]·2C₂H₅OH·2CH₂Cl₂(1)。单晶X射线衍射分析表明,簇合物呈中心对称的八核结构,中心稀土离子Yb1(Ⅲ)为八配位的双帽三角棱柱几何构型,Yb2、Yb3和Yb4均为七配位,分别为单帽三角棱柱、五角双锥及单帽八面体几何构型。簇合物1具有良好的溶剂稳定性。近红外荧光测试表明：簇合物1在室温下表现出Yb(Ⅲ)特征发射峰。此外,催化性质研究表明：簇合物1可以有效地催化CO₂与环氧化合物的环加成反应,且作为异相催化剂表现出良好的循环性能。     

四核钬配合物的结构、慢磁驰豫行为及CO2催化转化性质

使用多齿希夫碱配体通过溶剂热的方法合成了一例新的 Ho₄配合物，即[Ho₄(NO₃)₂(acac)₄(L)₂(CH₃OH)₂]·2CH₃CN，其中H₄L=(E)-2-(羟甲基)-2-(((2-羟基萘-1-基)亚甲基)氨基)丙烷-1，3-二醇，acac=乙酰丙酮。X射线衍射分析表明，配合物呈中心对称的四核结构，中心的Ho1(Ⅲ)和Ho2(Ⅲ)均为八配位的三角十二面体几何构型。配合物1具有良好的溶剂稳定性。磁性研究表明配合物1具有慢磁弛豫行为。据我们所知，配合物1是一例少有的在零直流场下具有慢磁驰豫行为的Ho₄配合物。值得一提的是，配合物1在催化CO₂与环氧化合物的环加成反应中表现出较高的催化活性。     

两个含铁、钴、硫金属异核羰基取代簇合物的合成及结构

Two novel substituted derivatives ( μ3-S)( μ-H)Fe₂Co(CO)₇L_n (n=2, L=AsPh₃ (3) n=1, L=dppm (4)) have been synthesized and characterized by IR, ¹H NMR, ³¹P NMR, MS and X-ray crystallography . The cluster 4 crystallizes in monoclinic space group C2/c, with a=1.589 1(7), b=1.814 9(8), c=2.277 8(11) nm, β=96.861(8), V=6.522(5) nm³, Z=8, D_c=1.552 g·cm^-3, F(000)=3 094, μ=12.95 cm^-1. Final R indices [i>2σ(I)]: R₁=0.054 3, wR₂=0.101 1. The cyclic voltammetric behavior for the parent cluster 1 and its substituted derivatives were investigated, the results show that the order of σ-donator ability is CO < PPh₃ < AsPh₃ < dppm. CCDC: 221867.     

四核钬配合物的结构、慢磁驰豫行为及CO2催化转化性质

使用多齿希夫碱配体通过溶剂热的方法合成了一例新的Ho4配合物,即[Ho₄(NO₃)₂(acac)₄(L)₂(CH₃OH)₂]·2CH₃CN,其中H4L=(E)-2-(羟甲基)-2-(((2-羟基萘-1-基)亚甲基)氨基)丙烷-1,3-二醇,acac=乙酰丙酮。X射线衍射分析表明,配合物呈中心对称的四核结构,中心的Ho1(Ⅲ)和Ho2(Ⅲ)均为八配位的三角十二面体几何构型。配合物1具有良好的溶剂稳定性。磁性研究表明配合物1具有慢磁弛豫行为。据我们所知,配合物1是一例少有的在零直流场下具有慢磁驰豫行为的Ho₄配合物。值得一提的是,配合物1在催化CO₂与环氧化合物的环加成反应中表现出较高的催化活性。     

系列类立方烷型Fe4S4簇合物的催化性质研究

系列类立方烷型Ｆｅ_４Ｓ_４簇合物的催化性质研究南玉明，徐吉庆，蔡辉，李淑芹（大庆石油学院石化系，安达１５１４００）（吉林大学化学系，长春１３００２３）关键词簇合物，类立方烷结构，催化１．前言对固氮酶的生物化学研究发现，固氮酶是由钼铁蛋白和铁蛋白组成的...     

三核钨簇合物-V2O5催化剂对苯乙烯氧化反应的催化

本文研究了三核钨簇合物［W₃O₂(CH₃CO₂)₆(H₂O)₃］Br₃·2H₂O与一些物质组成的二元催化剂对苯乙烯氧化反应的催化作用,结果表明：钨簇合物-V₂O₅催化剂对苯乙烯氧化反应的催化效果特别显著,而且在反应前后其重量、结构及催化活性基本不变,可以多次回收重复使用。对影响钨簇合物-V₂O₅催化剂催化性能的几个因素进行了讨论,测定了催化剂及其吸附氧气的红外光谱,说明钨簇合物及V₂O₅可以与O₂形成分子氧配合物及超氧(O^-₂)配合物。     

簇合物(p-H2)N-HCCCN的结构和能量

采用两体作用势模型和遗传算法对簇合物（p-H₂）_N-HCCCN的极小能量结构和能量进行了理论研究.结果表明,20 个para-H₂分子形成HCCCN周围的第一个溶剂层,第一个溶剂层包含三个溶剂环,每个溶剂环都有6 个para-H₂分子,第19和20个para-H₂分子分别聚集在HCCCN分子的N、H原子末端. 进一步计算了（p-H₂）_N-HCCCN的化学势,发现化学势随para-H₂分子个数的增加呈震荡变化.     

(ZrO2)1-x(Yb2O3)x纳米晶的水热法合成及其烧结体的电性能

(ZrO₂)_1-x(Yb₂O₃)_x (x=0.07, 0.09, 0.11) nanocrystallites were hydrothermally prepared in basic media by using co-precipitated Zr(OH)₄ and Yb(OH)₃ as precursor. The nanocrystallites have small particle sizes of 5.8~7.5 nm, narrow size distribution, less agglomeration and high sinterability. The oxide-ionic conduction properties of the prepared ceramics were investigated by means of AC impedance spectroscope, oxygen concentration cell at 600~1 000 ℃. The results show that the ceramic with x=0.09 is superior to the ceramics with x=0.07 and 0.11 in oxide-ionic conduction.     

钼铁钴硫簇合物催化乙炔还原性质的研究

钼铁钴硫簇合物催化乙炔还原性质的研究①南玉明②（大庆石油学院石化系，安达１５１４００）徐吉庆蔡辉（吉林大学化学系，长春１３００２３）关键词簇合物类立方烷结构催化电化学性质在化学模拟生物固氮研究的推动下，人们已合成了上百种Ｍｏ－Ｆｅ－Ｓ簇合物，并研究了...     

复合催化剂上CO2加氢合成C2烃类

介绍了由CO₂+H₂合成C2⁺烃的几种复合催化剂体系的研究进展，比较和评价了复合催化剂体系的活性和选择性及对C2⁺烃类生成的影响。着重于复合催化剂体系对C4⁺烃的生成及产物分布的影响并简述反应机理。     

Synthesis, crystal structures, magnetic and electric transport properties of Eu11InSb9 and Yb11InSb9

Two new rare-earth metal containing Zintl phases, Eu₁₁InSb₉ and Yb₁₁InSb₉ have been synthesized by reactions of the corresponding elements in molten In metal to serve as a self-flux. Their crystal structures have been determined by single crystal X-ray diffraction—both compounds are isostructural and crystallize in the orthorhombic space group Iba2 (No. 45), Z=4 with unit cell parameters a=12.224(2) Å, b=12.874(2) Å, c=17.315(3) Å for Eu₁₁InSb₉, and a=11.7886(11) Å, b=12.4151(12) Å, c=16.6743(15) Å for Yb₁₁InSb₉, respectively (Ca₁₁InSb₉-type, Pearson's code oI84). Both structures can be rationalized using the classic Zintl rules, and are best described in terms of discrete In-centered tetrahedra of Sb, [InSb₄]⁹⁻, isolated Sb dimers, [Sb₂]⁴⁻, and isolated Sb anions, Sb³⁻. These anionic species are separated by Eu²⁺ and Yb²⁺ cations, which occupy the empty space between them and counterbalance the formal charges. Temperature-dependent magnetic susceptibility and resistivity measurements corroborate such analysis and indicate divalent Eu and Yb, as well as poorly metallic behavior for both Eu₁₁InSb₉ and Yb₁₁InSb₉. The close relationships between these structures and those of the monoclinic α-Ca₂₁Mn₄Sb₁₈ and Ca₂₁Mn₄Bi₁₈ are also discussed.     

Synthesis, structure and magnetic properties of new vanadate PbCo2V2O8

A new vanadate PbCo₂V₂O₈ was obtained through the study of PbO-CoO-V₂O₅ ternary system. The crystal structure was determined by Rietveld method, indicating that PbCo₂V₂O₈ has a tetragonal structure of space group I41cd with a spiral chain along the c-axis. Magnetic properties of the titled compound were investigated by means of susceptibility, magnetization, and heat capacity measurements. The results show that PbCo₂V₂O₈ is a quasi-one-dimensional canted antiferromagnet with Neel temperature of ∼4 K, being consistent with its crystal structure.     

Synthesis, structure and properties of the new rare-earth Zintl phase Yb11GaSb9

A new rare-earth rich Zintl phase Yb₁₁GaSb₉ was synthesized by direct fusion of the corresponding elements, and large single crystals of the compound were obtained from high temperature flux synthesis. Its crystal structure was determined by single-crystal X-ray diffraction to be orthorhombic in the non-centrosymmetric space group Iba2 (No. 45), Z=4 (R₁=3.24%, wR₂=6.40%) with , , measured at 90(3) K. The structure belongs to the Ca₁₁InSb₉-type and can be viewed as built of isolated Sb₄-tetrahedra centered by Ga, Sb-dimers and isolated Sb anions, which are separated by Yb²⁺ cations. Electron count according to the Zintl formalism suggests that the phase is electron-precise and charge-balanced, which is supported by the virtually temperature-independent magnetization for Yb₁₁GaSb₉. Electrical resistivity data from 2 to 400 K confirm that Yb₁₁GaSb₉ is a small band-gap semiconductor with room temperature resistivity , and low-temperature resistivity at 2 K . As such, Yb₁₁GaSb₉ and related compounds might be promising materials for thermoelectric applications, and currently, efforts to synthesize new members of this family and test their thermoelectric performance are under way.     

TiO_2纳米带光催化二氧化碳甲烷化

研究了在常温常压下TiO2纳米带光催化CO2催化加氢气反应。在紫外光照射下,二氧化碳的加氢还原产物为甲烷。利用高分辨TEM,XRD,UV-Vis DRS,低温氮吸附-脱附,TG等考察了催化剂与甲烷产率的构效关系。结果表明,在600℃焙烧时得到的双晶材料具有最佳的光催化活性。优异的光催化活性主要得益于TiO2双晶脱水纳米带(DNR Bicrystalline dehydratednanoribbon)。上面形成的纳米晶界能够提高催化剂在紫外区的光吸收能力,TiO2(B)和锐钛矿独特的双晶间隔结构也提高了界面电荷分离的效率。担载贵金属Pt显著地提高了反应速率。     

Structure and Properties of Yb3Ge5

Single crystals of Yb₃Ge₅, grown from pure gallium or indium metal flux and investigated by means of CCD four-circle diffractometry, were consistent with the Th₃Pd₅-type of structure, displaying full order of vacancies and germanium atoms. From magnetic susceptibility and electrical resistivity measurements, performed on single-crystalline specimens, Yb₃Ge₅ was found to be an intermediate valent systems.     

片状纳米结构CeO2晶体的制备及其吸附CO2性能

在室温下,将CeCl₃溶液与CO₂储存材料（CO₂SM）混合、搅拌0.5 h制备了片状碳酸铈前驱体（CCPs）,并在500℃下煅烧CCPs 4 h,制得平均尺寸为4.94 μm×0.92 μm,厚度为0.04~0.08 μm纳米结构片状CeO₂晶体。在此过程中,CO₂SM不但可以提供CO₃^2-,还能起到分散剂和结构导向剂的作用。反应过程中,系统地研究了CO₂SM用量、Ce³⁺浓度和搅拌时间3个因素对CCPs形态和大小的影响,得到最优制备条件：0.1 g CO₂SM和50 mL 0.03 mol·L^-1 Ce³⁺水溶液以1 000 r·min^-1转速在室温下搅拌0.5 h。煅烧CCPs后,所制备的片状CeO₂晶体在室温下CO₂吸附量可达0.554 mmol·g^-1。     

Novel carbonyl iron-bismuth clusters - synthesis, structure, CO2 insertion and potential as molecular precursors for BiFeO3

The reaction of Fe₂(CO)₉ with Bi(OSiMe₂^tBu)₃ gave soluble [(CO)₄FeBi(OSiMe₂^tBu)]₂ (1) in moderate yield whereas in case of Bi(O^tBu)₃ used as starting material both [(CO)₄FeBi(O^tBu)]_n (2) and the bismuth-iron cluster [(CO)₃FeBi₃(O^tBu)₄{OCO(O^tBu)}]₂ (3) were isolated. The latter forms upon insertion of CO₂, released during reaction of diiron nonacarbonyl with bismuth tert-butoxide, into a Bi-O^tBu bond. The compounds were characterized by IR and ¹H NMR spectroscopy as well as thermogravimetric analyses. Additionally, the molecular structures of compounds 1 and 3 were elucidated by single crystal X-ray diffraction. The core structure of [(CO)₄FeBi(OSiMe₂^tBu)]₂ (1) is build up by a four-membered Bi₂Fe₂ ring whereas [(CO)₃FeBi₃(O^tBu)₄{OCO(O^tBu)}]₂ (3) is composed of two tetrahedral FeBi₃ cluster cores that dimerise via bridging -OCO(O^tBu) ligands. Analysis of the TGA residues by PXRD revealed that compound 2 is the best precursor for multiferroic BiFeO₃ among the compounds studied here, although Bi₂₅FeO₃₉ was detected as minor impurity.     

Synthesis and CO2 capture evaluation of Li2−xKxZrO3 solid solutions and crystal structure of a new lithium-potassium zirconate phase

Solid solutions of lithium and potassium metazirconates Li_2−xK_xZrO₃ (where, 0?x?2) were prepared by coprecipitation. Samples were characterized by powder X-ray diffraction, scanning electron microscopy, and thermogravimetric analyses. Results showed that the solubility limits of potassium into Li₂ZrO₃ is x=0.2. Furthermore, at higher potassium concentrations, a new phase was synthesized, Li_2.27K_1.19Zr_2.16O_6.05. For structural studies of this new phase, XRD data were analyzed by Rietveld refinements. Additionally, at high potassium concentrations different phases of ZrO₂ were found, as potassium tends to sublimate. On the other hand, lithium-potassium metazirconate solid solutions, Li_2−xK_xZrO₃, were tested as CO₂ captors. Thermal analyses into a CO₂ flux showed that Li_2−xK_xZr₂O₃ solid solutions present a better CO₂ absorption than Li₂ZrO₃ pure. The differences observed in the CO₂ sorption processes were explained with thermodynamic data.     

锂参与合成MOF-5用于CO2/CH4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(xLi-MOF-5, x=0, 1, 3, 5).在MOF-5结晶过程中,锂离子被合并入其骨架结构中.实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质.不同的xLi-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变.其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g^-1),对40% CO₂/60% CH₄混合气体具有最优吸附选择性.