Genotyping--from genomic DNA to genotype in a single tube

Nucleotide variations in the human genome, such as single-nucleotide polymorphisms, have been researched more intensively since it became apparent that these deviations are linked to various diseases and also several side effects of drugs. The investigation of genomic DNA in the laboratory requires routine methods that are time-, labour-, and cost-effective. These criteria are fulfilled by so-called closed-tube methods, which are applied directly to isolated genomic DNA without any preamplification.     

DNA Dangling‐End‐Induced Colloidal Stabilization of Gold Nanoparticles for Colorimetric Single‐Nucleotide Polymorphism Genotyping

A single‐nucleotide polymorphism (SNP) detection method was developed by combining single‐base primer extension and salt‐induced aggregation of gold nanoparticles densely functionalized with double‐stranded DNA (dsDNA‐AuNP). The dsDNA‐AuNPs undergo rapid aggregation in a medium of high ionic strength, whereas particles having a single‐base protrusion at the outermost surface disperse stably, allowing detection of a single‐base difference in length by color changes. When SNP typing primers are used as analytes to hybridize to the single‐stranded DNA on the AuNP surface, the resulting dsDNA‐AuNP works as a visual indicator of single‐base extension. A set of four extension reaction mixtures is prepared using each of ddNTPs and subsequently subjected to the aggregation assay. Three mixtures involving ddNTP that is not complementary to the SNP site in the target produce the aggregates that exhibit a purple color. In contrast, one mixture with the complementary ddNTP generates the single‐base protrusion and appears red. This method could potentially be used in clinical diagnostics for personalized medicine.     

水溶性碳纳米粒子的制备及其在DNA和单核苷酸多态性分析中的应用

利用电化学氧化的方法制备了水溶性好、粒径为7～12nm的碳纳米粒子,该碳纳米粒子通过π-π相互作用吸附荧光标记的单链DNA探针,并能有效地猝灭其荧光．当单链DNA探针与匹配的DNA目标分子杂交形成双链DNA时,猝灭的荧光被恢复,由此可以检测1-200nmol／L的DNA目标分子。此外,在碳纳米粒子存在时,由荧光标记的DNA探针和DNA目标分子形成的双链DNA的熔解温度可以简便地被测定,当双链DNA有错配碱基时,其熔解温度降低,由此可方便、快速地分析单核苷酸多态性．     

Efficient Discrimination of Single Nucleotide Polymorphisms (SNPs) Using Oligonucleotides Modified with C5‐Pyrene‐Functionalized DNA and Flanking Locked Nucleic Acid (LNA) Monomers

Oligodeoxyribonucleotides modified with 5‐[3‐(1‐pyrenecarboxamido)propynyl]‐2′‐deoxyuridine monomer X and proximal LNA monomers display higher affinity for complementary DNA, more pronounced increases in fluorescence emission upon DNA binding, and improved discrimination of SNPs at non‐stringent conditions, relative to the corresponding LNA‐free probes across a range of sequence contexts. The results reported herein suggest that the introduction of LNA monomers influences the position of nearby fluorophores via indirect conformational restriction, a characteristic that can be utilized to develop optimized fluorophore‐labeled probes for SNP‐discrimination studies.     

Tuning single nucleotide discrimination in polymerase chain reactions (PCRs): synthesis of primer probes bearing polar 4'-C-modifications and their application in allele-specific PCR

There are many methods available for the detection of nucleotide variations in genetic material. Most of these methods are applied after amplification of the target genome sequence by the polymerase chain reaction (PCR). Many efforts are currently underway to develop techniques that can detect single nucleotide variations in genes either by means of, or without the need for, PCR. Allele-specific PCR (asPCR), which reports nucleotide variations based on either the presence or absence of a PCR-amplified DNA product, has the potential to combine target amplification and analysis in one single step. The principle of asPCR is based on the formation of matched or mismatched primer-target complexes by using allele-specific primer probes. PCR amplification by a DNA polymerase from matched 3'-primer termini proceeds, whereas a mismatch should obviate amplification. Given the recent advancements in real-time PCR, this technique should, in principle, allow single nucleotide variations to be detected online. However, this method is hampered by low selectivity, which necessitates tedious and costly manipulations. Recently, we reported that the selectivity of asPCR can be significantly increased through the employment of chemically modified primer probes. Here we report further significant advances in this area. We describe the synthesis of various primer probes that bear polar 4'-C-modified nucleotide residues at their 3' termini, and their evaluation in real-time asPCR. We found that primer probes bearing a 4'-C-methoxymethylene modification have superior properties in the discrimination of single nucleotide variations by PCR.     

Fluorescence Detection of Single‐Nucleotide Polymorphisms with a Single,Self‐Complementary,Triple‐Stem DNA Probe

Singled out for its singularity : In a single‐step, single‐component, fluorescence‐based method for the detection of single‐nucleotide polymorphisms at room temperature, the sensor is comprised of a single, self‐complementary DNA strand that forms a triple‐stem structure. The large conformational change that occurs upon binding to perfectly matched (PM) targets results in a significant increase in fluorescence (see picture; F=fluorophore, Q=quencher).

     

Genotyping of single nucleotide polymorphisms by primer extension reaction and a dual-analyte bio/chemiluminometric assay

Primer extension reaction (PEXT) is the most widely used approach to genotyping of single nucleotide polymorphisms (SNP). It is based on the high accuracy of nucleotide incorporation by the DNA polymerase. We propose a dual-analyte bio/chemiluminometric method for the simultaneous detection of the PEXT reaction products of the normal and mutant allele in a high sample-throughput format. PCR-amplified DNA fragments that span the SNP of interest are subjected to two PEXT reactions using normal and mutant primers in the presence of digoxigenin-dUTP and biotin-dUTP. Both primers contain a d(A)₃₀ segment at the 5′-end but differ in the final nucleotide at the 3′-end. Under optimized conditions only the primer that is perfectly complementary with the interrogated DNA will be extended by DNA polymerase and lead to a digoxigenin- or biotin-labeled product. The products of the PEXT reactions are mixed, denatured, and captured in microtiter wells through hybridization with immobilized oligo(dT) strands. Detection is performed by adding a mixture of antidigoxigenin–alkaline phosphatase (ALP) conjugate and a streptavidin–aequorin conjugate. The flash-type bioluminescent reaction of aequorin is triggered by the addition of Ca²⁺. ALP is then measured by adding the appropriate chemiluminogenic substrate. The method was evaluated by genotyping two SNPs of the human mannose-binding lectin gene (MBL2) and one SNP of the cytochrome P450 gene CYP2D6. Patient genotypes showed 100% concordance with direct DNA sequencing data.     

Ag(I) ion mediated formation of a C-A mispair by DNA polymerases

Silver turns up the A-C: In the presence of Ag(I) ions, a DNA polymerase incorporated deoxyadenosine (from dATP) at the site opposite cytosine in the template strand to afford the full-length product (see scheme), meaning that DNA polymerases prefer a C-Ag(I)-A base pair to the more thermodynamically stable C-Ag(I)-C base pair.     

Primer Extension Reaction Assays for Incorporation of Deoxynucleotide Analogue into DNA

Incorporation of deoxynucleotide analogues into DNA is important for the expansion of DNA functions. Primer extension reactions are commonly used for the assay of such reaction events. However, current assay protocols generally rely on radiolabeling, fluorescence reporter labeling, or removal of specific deoxynucleotide triphosphate in the reaction mixture. Herein we report on the design of two novel assay protocols that utilize a dideoxynucleotide‐terminated template strand and a phosphorothiolate‐modified deoxynucleotide‐terminated template strand. We designed and synthesized a deoxyuridine triphosphate analogue (dU*TP) containing 2‐bromoisobutyryl group and demonstrated that it could be well recognized by ?29DNA polymerase, E. coli DNA polymerase I Klenow Fragment, Bst DNA polymerase Large Fragment, and E. coli DNA polymerase I Klenow Fragment (exo⁽), which translated to effective incorporation of dU*TP into DNA. dU*TP was also successfully incorporated into extremely long single‐stranded DNA at high‐density using ?29 DNA polymerase by rolling circle amplification.     

Loading Dynamics of a Sliding DNA Clamp

Sliding DNA clamps are loaded at a ss/dsDNA junction by a clamp loader that depends on ATP binding for clamp opening. Sequential ATP hydrolysis results in closure of the clamp so that it completely encircles and diffuses on dsDNA. We followed events during loading of an E. coli β clamp in real time by using single‐molecule FRET (smFRET). Three successive FRET states were retained for 0.3 s, 0.7 s, and 9 min: Hydrolysis of the first ATP molecule by the γ clamp loader resulted in closure of the clamp in 0.3 s, and after 0.7 s in the closed conformation, the clamp was released to diffuse on the dsDNA for at least 9 min. An additional single‐molecule polarization study revealed that the interfacial domain of the clamp rotated in plane by approximately 8° during clamp closure. The single‐molecule polarization and FRET studies thus revealed the real‐time dynamics of the ATP‐hydrolysis‐dependent 3D conformational change of the β clamp during loading at a ss/dsDNA junction.     

Rapid Non‐Crosslinking Aggregation of DNA‐Functionalized Gold Nanorods and Nanotriangles for Colorimetric Single‐Nucleotide Discrimination

Gold nanoparticles modified with DNA duplexes are rapidly and spontaneously aggregated at high ionic strength. In contrast, this aggregation is greatly suppressed when the DNA duplex has a single‐base mismatch or a single‐nucleotide overhang located at the outermost surface of the particle. These colloidal features emerge irrespective of the size and composition of the particle core; however, the effects of the shape remain unexplored. Using gold nanorods and nanotriangles (nanoplatelets), we show herein that both remarkable rapidity in colloidal aggregation and extreme susceptibility to DNA structural perturbations are preserved, regardless of the shape and aspect ratio of the core. It is also demonstrated that the DNA‐modified gold nanorods and nanotriangles are applicable to naked‐eye detection of a single‐base difference in a gene model. The current study corroborates the generality of the unique colloidal properties of DNA‐functionalized nanoparticles, and thus enhances the feasibility of their practical use.     

Anthraquinone as a redox label for DNA: synthesis, enzymatic incorporation, and electrochemistry of anthraquinone-modified nucleosides, nucleotides, and DNA

Modified 2'-deoxynucleosides and deoxynucleoside triphosphates (dNTPs) bearing anthraquinone (AQ) attached through an acetylene or propargylcarbamoyl linker at the 5-position of pyrimidine (C) or at the 7-position of 7-deazaadenine were prepared by Sonogashira cross-coupling of halogenated dNTPs with 2-ethynylanthraquinone or 2-(2-propynylcarbamoyl)anthraquinone. Polymerase incorporations of the AQ-labeled dNTPs into DNA by primer extension with KOD XL polymerase have been successfully developed. The electrochemical properties of the AQ-labeled nucleosides, nucleotides, and DNA were studied by cyclic and square-wave voltammetry, which show a distinct reversible couple of peaks around -0.4 V that make the AQ a suitable redox label for DNA.