Near‐Infrared Active Lead Chalcogenide Quantum Dots: Preparation,Post‐Synthesis Ligand Exchange,and Applications in Solar Cells

Quantum dots (QDs) of lead chalcogenides (e.g. PbS, PbSe, and PbTe) are attractive near‐infrared (NIR) active materials that show great potential in a wide range of applications, such as, photovoltaics (PV), optoelectronics, sensors, and bio‐electronics. The surface ligand plays an essential role in the production of QDs, post‐synthesis modification, and their integration to practical applications. Therefore, it is critically important that the influence of surface ligands on the synthesis and properties of QDs is well understood for their applications in various devices. In this Review we elaborate the application of colloidal synthesis techniques for the preparation of lead chalcogenide based QDs. We specifically focus on the influence of surface ligands on the synthesis of QDs and their solution‐phase ligand exchange. Given the importance of lead chalcogenide QDs as potential light harvesters, we also pay particular attention to the current progress of these QDs in photovoltaic applications.     

Self‐Assembled Luminescent Quantum Dots To Generate Full‐Color and White Circularly Polarized Light

The design and fabrication of quantum dots (QDs) with circularly polarized luminescence (CPL) has been a great challenge in developing chiroptical materials. We herein propose an alternative to the use of chiral capping reagents on QDs for the fabrication of CPL‐active QDs that is based on the supramolecular self‐assembly of achiral QDs with chiral gelators. Full‐color‐tunable CPL‐active QDs were obtained by simple mixing or gelation of a chiral gelator and achiral 3‐mercaptopropionic acid capped QDs. In addition, the handedness of the CPL can be controlled by the supramolecular chirality of the gels. Moreover, QDs with circularly polarized white light emission were fabricated for the first time by tuning the blending ratio of colorful QDs in the gel. The chirality transfer in the co‐assembly of the achiral QDs with the gelator and the spacer effect of the capping reagents on the QD surface are also discussed. This work provides new insight into the design of functional chiroptical materials.     

Tuning Optical Properties of Si Quantum Dots by π‐Conjugated Capping Molecules

The absorption and photoluminescence (PL) properties of silicon quantum dots (QDs) are greatly influenced by their size and surface chemistry. Herein, we examined the optical properties of three Si QDs with increasing σ–π conjugation length: octyl‐, (trimethylsilyl)vinyl‐, and 2‐phenylvinyl‐capped Si QDs. The PL photon energy obtained from as‐prepared samples decreased by 0.1–0.3 eV, while the PL excitation (PLE) extended from 360 nm (octyl‐capped Si QDs) to 400 nm (2‐phenylvinyl‐capped Si QDs). A vibrational PL feature was observed in all samples with an energy separation of about 0.192±0.013 eV, which was explained based on electron–phonon coupling. After soft oxidization through drying, all samples showed blue PL with maxima at approximately 410 nm. A similar high‐energy peak was observed with the bare Si QD sample. The changes in the optical properties of Si QDs were mainly explained by the formation of additional states arising from the strong σ–π conjugation and QD oxidation.     

Design of Single Gold Atoms on Nitrogen‐Doped Carbon for Molecular Recognition in Alkyne Semi‐Hydrogenation

Single‐atom heterogeneous catalysts with well‐defined architectures are promising for deriving structure–performance relationships, but the challenge lies in finely tuning the structural and electronic properties of the metal. To tackle this point, a new approach based on the surface diffusion of gold atoms on different cavities of N‐doped carbon is presented. By controlling the activation temperature, the coordination neighbors (Cl, O, N) and the oxidation state of the metal can be tailored. Semi‐hydrogenation of various alkynes on the single‐atom gold catalysts displays substrate‐dependent catalytic responses; structure insensitive for alkynols with γ‐OH and unfunctionalized alkynes, and sensitive for alkynols with α‐OH. Density functional theory links the sensitivity for alkynols to the strong interaction between the substrate and specific gold‐cavity ensembles, mimicking a molecular recognition pattern that allows to identify the cavity site and to enhance the catalytic activity.     

Structural and Size Effects on the Spectroscopic and Redox Properties of CdSe Nanocrystals in Solution: The Role of Defect States

Two series of CdSe quantum dots (QDs) with different diameters are prepared, according to frequently used protocols of the same synthetic procedure. For each sample the photophysical properties and the potentials for the first reduction and oxidation processes in organic solution are determined. The band gap obtained from electrochemical experiments is compared with that determined from the absorption and luminescence spectra. While the optical band gap decreases upon increasing the nanocrystal diameter, as expected on the basis of quantum confinement, the redox potentials and the electrochemical band gap are not monotonously related to the QD size. For both series, the smallest and largest QDs are both easier to oxidize and reduce than mid‐sized QDs. In fact, the latter samples exhibit very broad voltammetric profiles, which suggests that the heterogeneous electron‐transfer processes from/to the electrode are kinetically hindered. Conversely, the electrochemical band gap for the smallest and largest particles of each series is somewhat smaller than the optical band gap. These results indicate that, while the optical band gap depends on the actual electron–hole recombination within the nanocrystal, and therefore follows the size dependence expected from the particle‐in‐a‐box model, the electrochemical processes of these QDs are strongly affected by other factors, such as the presence of surface defects. The investigations suggest that the influence of these defects on the potential values is more important for the smallest and largest QDs of each series, as confirmed by the respective luminescence bands and quantum yields. An interpretation for the size‐dependent evolution of the surface defects in these nanocrystals is proposed based on the mechanism of their formation and growth.     

DNA‐Templated Assembly of a Heterobivalent Quantum Dot Nanoprobe For Extra‐ and Intracellular Dual‐Targeting and Imaging of Live Cancer Cells

Quantum dots (QDs) hold great promise for the molecular imaging of cancer because of their superior optical properties. Although cell‐surface biomarkers can be readily imaged with QDs, non‐invasive live‐cell imaging of critical intracellular cancer markers with QDs is a great challenge because of the difficulties in the automatic delivery of QD probes to the cytosol and the ambiguity of intracellular targeting signals. Herein, we report a new type of DNA‐templated heterobivalent QD nanoprobes with the ability to target and image two spatially isolated cancer markers (nucleolin and mRNA) present on the cell surface and in the cell cytosol. Bypassing endolysosomal sequestration, this type of QD nanoprobes undergo macropinocytosis following the nucleolin targeting and then translocate to the cytosol for mRNA targeting. Fluorescence resonance energy transfer (FRET) based confocal microscopy enables unambiguous signal deconvolution of mRNA‐targeted QD nanoprobes inside cancer cells.     

High‐resolution quantification by charge‐dominant electrophoretic mobility shift of quantum dots

Conjugation of biomolecules to colloidal nanoparticles, such as quantum dots (QDs), often leads to change in mobility. We discover that linking DNA molecules to quantum dots alters their surface charge density without significantly increasing the hydrodynamic radius, causing a prominent shift in electrophoretic mobility. In this study, a high‐resolution molecular quantification method named quantification by QDs electrophoretic mobility shift (qQEMS) is developed based on the charge‐dominant transformation that closely associates DNA quantity to QDs electrophoretic mobility. The versatility of qQEMS is demonstrated by a number of quantification assays in which DNA molecules functioned as enzyme substrates, target‐specific probes, and competitive charge carriers. qQEMS shows a great potential as a generic and versatile quantification platform for a wide range of applications.     

Host–Guest Interaction of Chaperonin GroEL and Water‐Soluble CdTe Quantum Dots and its Size‐Selective Inclusion

Some nanoparticles, such as quantum dots (QDs), are widely used in the biological and biomedical fields due to their unique optical properties. However, little is currently known about the interaction between these nanoparticles and biomolecules. Herein, we systemically investigated the interaction between chaperonin GroEL and water‐soluble CdTe QDs based on fluorescence correlation spectroscopy (FCS), capillary electrophoresis, and fluorescence spectrometry. We observed that some water‐soluble CdTe QDs were able to enter the inner cavity of GroEL and formed an inclusion complex after the activation of chaperonin GroEL with ATP. The inclusion of GroEL was size‐selective to QDs and only small QDs were able to enter the inner cavity. The inclusion could suppress the fluorescence quenching of the QDs. Meanwhile, we evaluated the association constant between chaperonin GroEL and CdTe QDs by FCS. Our results further demonstrated that FCS was a very useful tool for study of the interaction of QDs and biomolecules.     

Coumaraz‐2‐on‐4‐ylidene: Ambiphilic N‐Heterocyclic Carbenes with a Tunable Electronic Structure

Herein, a coumaraz‐2‐on‐4‐ylidene ( 1 ) as a new example of an ambiphilic N‐heterocyclic carbene, having electronic properties that can be fine‐tuned, is reported. The N‐carbamic and aryl groups on the carbene carbon center provide exceptionally high electrophilicity and nucleophilicity simultaneously to the carbene center, as evidenced by the ⁷⁷Se NMR chemical shifts of their selenoketone derivatives and the CO stretching strengths of their rhodium carbonyl complexes. Since the precursors of 1 could be synthesized from various functionalized Schiff bases in a practical and scalable manner, the electronic properties of 1 can be fine‐tuned in a quantitative and predictable way by using the Hammett σ constant of the functional groups on aryl ring. The facile electronic tuning capability of 1 may be applicable to eliciting novel properties in main‐group and transition‐metal chemistry.     

Effect of Surface Modification on Semiconductor Nanocrystal Fluorescence Lifetime

Semiconductor nanocrystals, namely, quantum dots (QDs), present a set of unique photoluminescence properties, which has led to increased interest in using them as advantageous alternatives to conventional organic dyes. Many applications of QDs involve surface modification to enhance the solubility or biocompatibility of the QDs. One of the least exploited properties of QDs is the very long photoluminescence lifetime that usually has complex kinetics owing to the effect of quantum confinement. Herein, we describe the effect of different surface modifications on the photoluminescence decay kinetics of QDs. The different surface modifications were carefully chosen to provide lipophilic or water‐soluble QDs with either positive or negative surface net charges. We also survey the effect on the QD lifetime of several ligands that interact with the QD surface, such as organic chromophores or fluorescent proteins. The results obtained demonstrate that time‐resolved fluorescence is a useful tool for QD‐based sensing to set the basis for the development of time‐resolved‐based nanosensors.     

On‐Surface Synthesis and Characterization of Triply Fused Porphyrin–Graphene Nanoribbon Hybrids

On‐surface synthesis offers a versatile approach to prepare novel carbon‐based nanostructures that cannot be obtained by conventional solution chemistry. Graphene nanoribbons (GNRs) have potential for a variety of applications. A key issue for their application in molecular electronics is in the fine‐tuning of their electronic properties through structural modifications, such as heteroatom doping or the incorporation of non‐benzenoid rings. In this context, the covalent fusion of GNRs and porphyrins (Pors) is a highly appealing strategy. Herein we present the selective on‐surface synthesis of a Por–GNR hybrid, which consists of two Pors connected by a short GNR segment. The atomically precise structure of the Por–GNR hybrid has been characterized by bond‐resolved scanning tunneling microscopy (STM) and noncontact atomic force microscopy (nc‐AFM). The electronic properties have been investigated by scanning tunneling spectroscopy (STS), in combination with DFT calculations, which reveals a low electronic gap of 0.4 eV.     

Current Advances in Quantum‐Dots‐Based Photoelectrochemical Immunoassays

As a newly developed technique, photoelectrochemical (PEC) immunoassays have attracted great attention in recent years because of their low cost and desirable sensitivity. Because the detection signal originates from the photoelectric conversion of photoelectric materials, the appearance and application of quantum dots (QDs), which possess unique photophysical properties and regulated optoelectronic characteristics, has taken the development of PEC immunoassays to new heights. This review concisely introduces the general mechanism of QDs‐based photoelectric conversion for immunoassays and summarizes the current advances in QD applications in immunoassays. Given that signal strategies and photoactive materials are the key elements in PEC biosensor systems, we comprehensively highlight the state‐of‐the‐art signaling strategies and various applications of QDs in PEC immunoassays to introduce advances in QDs‐based PEC immunoassays. Finally, challenges and future developmental trends are briefly discussed     

Van Der Waals heterogeneous layer‐layer carbon nanostructures involving π···H‐C‐C‐H···π···H‐C‐C‐H stacking based on graphene and graphane sheets

Noncovalent interactions involving aromatic rings, such as π···π stacking, CH···π are very essential for supramolecular carbon nanostructures. Graphite is a typical homogenous carbon matter based on π···π stacking of graphene sheets. Even in systems not involving aromatic groups, the stability of diamondoid dimer and layer‐layer graphane dimer originates from C − H···H − C noncovalent interaction. In this article, the structures and properties of novel heterogeneous layer‐layer carbon‐nanostructures involving π···H‐C‐C‐H···π···H‐C‐C‐H stacking based on [n ]‐graphane and [n ]‐graphene and their derivatives are theoretically investigated for n = 16–54 using dispersion corrected density functional theory B3LYP‐D3 method. Energy decomposition analysis shows that dispersion interaction is the most important for the stabilization of both double‐ and multi‐layer‐layer [n ]‐graphane@graphene. Binding energy between graphane and graphene sheets shows that there is a distinct additive nature of CH···π interaction. For comparison and simplicity, the concept of H‐H bond energy equivalent number of carbon atoms (noted as NHEQ), is used to describe the strength of these noncovalent interactions. The NHEQ of the graphene dimers, graphane dimers, and double‐layered graphane@graphene are 103, 143, and 110, indicating that the strength of C‐H···π interaction is close to that of π···π and much stronger than that of C‐H···H‐C in large size systems. Additionally, frontier molecular orbital, electron density difference and visualized noncovalent interaction regions are discussed for deeply understanding the nature of the C‐H···π stacking interaction in construction of heterogeneous layer‐layer graphane@graphene structures. We hope that the present study would be helpful for creations of new functional supramolecular materials based on graphane and graphene carbon nano‐structures. © 2017 Wiley Periodicals, Inc.     

On‐Surface Synthesis of Cumulene‐Containing Polymers via Two‐Step Dehalogenative Homocoupling of Dibromomethylene‐Functionalized Tribenzoazulene

Cumulene compounds are notoriously difficult to prepare and study because their reactivity increases dramatically with the increasing number of consecutive double bonds. In this respect, the emerging field of on‐surface synthesis provides exceptional opportunities because it relies on reactions on clean metal substrates under well‐controlled ultrahigh‐vacuum conditions. Here we report the on‐surface synthesis of a polymer linked by cumulene‐like bonds on a Au(111) surface via sequential thermally activated dehalogenative C?C coupling of a tribenzoazulene precursor equipped with two dibromomethylene groups. The structure and electronic properties of the resulting polymer with cumulene‐like pentagon–pentagon and heptagon–heptagon connections have been investigated by means of scanning probe microscopy and spectroscopy methods and X‐ray photoelectron spectroscopy, complemented by density functional theory calculations. Our results provide perspectives for the on‐surface synthesis of cumulene‐containing compounds, as well as protocols relevant to the stepwise fabrication of carbon–carbon bonds on surfaces.     

Ceria–Zirconia Particles Wrapped in a 2D Carbon Envelope: Improved Low‐Temperature Oxygen Transfer and Oxidation Activity

Engineering the interface between different components of heterogeneous catalysts at nanometer level can radically alter their performances. This is particularly true for ceria‐based catalysts where the interactions are critical for obtaining materials with enhanced properties. Here we show that mechanical contact achieved by high‐energy milling of CeO₂–ZrO₂ powders and carbon soot results in the formation of a core of oxide particles wrapped in a thin carbon envelope. This 2D nanoscale carbon arrangement greatly increases the number and quality of contact points between the oxide and carbon. Consequently, the temperatures of activation and transfer of the oxygen in ceria are shifted to exceptionally low temperatures and the soot combustion rate is boosted. The study confirms the importance of the redox behavior of ceria‐zirconia particles in the mechanism of soot oxidation and shows that the organization of contact points at the nanoscale can significantly modify the reactivity resulting in unexpected properties and functionalities.     

A Brief Overview of Some Physical Studies on the Relaxation Dynamics and Förster Resonance Energy Transfer of Semiconductor Quantum Dots

This article highlights some physical studies on the relaxation dynamics and Förster resonance energy transfer (FRET) of semiconductor quantum dots (QDs) and the way these phenomena change with size, shape, and composition of the QDs. The understanding of the excited‐state dynamics of photoexcited QDs is essential for technological applications such as efficient solar energy conversion, light‐emitting diodes, and photovoltaic cells. Here, our emphasis is directed at describing the influence of size, shape, and composition of the QDs on their different relaxation processes, that is, radiative relaxation rate, nonradiative relaxation rate, and number of trap states. A stochastic model of carrier relaxation dynamics in semiconductor QDs was proposed to correlate with the experimental results. Many recent studies reveal that the energy transfer between the QDs and a dye is a FRET process, as established from 1/d⁶ distance dependence. QD‐based energy‐transfer processes have been used in applications such as luminescence tagging, imaging, sensors, and light harvesting. Thus, the understanding of the interaction between the excited state of the QD and the dye molecule and quantitative estimation of the number of dye molecules attached to the surface of the QD by using a kinetic model is important. Here, we highlight the influence of size, shape, and composition of QDs on the kinetics of energy transfer. Interesting findings reveal that QD‐based energy‐transfer processes offer exciting opportunities for future applications. Finally, a tentative outlook on future developments in this research field is given.     

Preparation of High‐Performance Water‐Soluble Quantum Dots for Biorecognition through Fluorescence Resonance Energy Transfer

An improved method for the synthesis of high‐performance and water‐soluble quantum dots (QDs) involving the encapsulation of mercaptosuccinic acid coated QDs (MSA‐QDs) with poly(diallyldimethylammonium chloride) (PDDA) followed by their direct photoactivation with fluorescent radiation near 295 K to yield PDDA‐coated QDs (PDDA‐QDs) has been demonstrated. The quantum yield (QY) of the PDDA‐QDs was significantly improved from 0.6 (QY of MSA‐QDs) to 48 %. By using this synthetic strategy, highly photoluminescent PDDA‐QDs of varied size were readily prepared. The surface properties of PDDA‐QDs and MSA‐QDs were extensively characterized. The highly luminescent and positively charged PDDA‐QDs serve as a useful and convenient tool for protein adsorption. With a Δ⁵‐3‐ketosteroid isomerase adsorbed PDDA‐QD complex, the biorecognition of steroids was demonstrated through the application of fluorescent resonance energy transfer.     

“Click” on Tubes: a Versatile Approach towards Multimodal Functionalization of SWCNTs

Organic functionalization of carbon nanotube sidewalls is a tool of primary importance in material science and nanotechnology, equally from a fundamental and an applicative point of view. 1 , 2 Here, an efficient and versatile approach for the organic/organometallic functionalization of single‐walled carbon nanotubes (SWCNTs) capable of imparting multimodality to these fundamental nanostructures, is described. Our strategy takes advantage of well‐established Cu‐mediated acetylene‐azide coupling (CuAAC) reactions applied to phenylazido‐functionalized SWCNTs for their convenient homo‐/heterodecoration with a number of organic/organometallic frameworks, or mixtures thereof, bearing terminal acetylene pendant arms. Phenylazido‐decorated SWCNTs were prepared by chemoselective arylation of the CNT sidewalls with diazonium salts under mild conditions, and subsequently used for the copper‐mediated cycloaddition protocol in the presence of terminal acetylenes. The latter reaction was performed in one step by using either single acetylene derivatives or equimolar mixtures of terminal alkynes bearing either similar functional groups (masked with orthogonally cleavable protecting groups) or easily distinguishable functionalities (on the basis of complementary analytical/spectroscopic techniques). All materials and intermediates were characterized with respect to their most relevant aspects/properties by TEM microscopy, thermogravimetric analysis coupled with MS analysis of volatiles (TG‐MS), elemental analysis, cyclic voltammetry (CV), Raman and UV/Vis spectroscopy. The functional loading and related chemical grafting of both primary amino‐ and ferrocene‐decorated SWCNTs were spectroscopically (UV/Vis, Kaiser test) and electrochemically (CV) determined, respectively.     

Biomimetic Synthesis of Ag2Se Quantum Dots with Enhanced Photothermal Properties and as “Gatekeepers” to Cap Mesoporous Silica Nanoparticles for Chemo–Photothermal Therapy

Ag₂Se quantum dots (QDs) with near‐infrared (NIR) fluorescence have been widely utilized in NIR fluorescence imaging in vivo because of their narrow bulk band gap and excellent biocompatibility. However, most of synthesis methods for Ag₂Se QDs are expensive and the reactants are toxic. Herein, a new protein‐templated biomimetic synthesis approach is proposed for the preparation of Ag₂Se QDs by employing bovine serum albumin (BSA) as a template and dispersant. The BSA‐templated Ag₂Se QDs (Ag₂Se@BSA QDs) showed NIR fluorescence with high fluorescence quantum yield (≈21.2 %), excellent biocompatibility and good dispersibility in different media. Moreover, the obtained Ag₂Se@BSA QDs exhibited remarkable photothermal conversion (≈27.8 %), which could be used in photothermal therapy. As a model application in biomedicine, the Ag₂Se@BSA QDs were used as “gatekeepers” to cap mesoporous silica nanoparticles (MSNs) by means of electrostatic interaction. By taking the advantages of NIR fluorescence and photothermal property of Ag₂Se@BSA QDs, the obtained MSN‐DOX‐Ag₂Se nanoparticles (MDA NPs) were employed as a nanoplatform for combined chemo‐photothermal therapy. Compared with free DOX and MDA NPs without NIR laser, the laser‐treated MDA NPs exhibited lower cell viability in vitro, implying that Ag₂Se@BSA QDs are highly promising photothermal agents and the MDA NPs are potential carriers for chemo–photothermal therapy.     

Post‐Modification of the Ethene Bridge in the Rational Design of Photochromic Diarylethenes

Fine‐tuning of the molecular structure of organic bistable compounds to improve their photochromic performance or to introduce additional functions remains an important issue in the development of photoresponsive materials. Diarylethenes bearing heterocyclic moieties belong to the most intensively studied class of organic photochromes due to their excellent photochemical properties. A huge number of diarylethenes have been synthesized so far. Analysis of the literature data shows that there are very worthy examples of diarylethenes developed by the Irie and Feringa groups, which can be the common starting material for a number of diarylethenes functionalized in hetaryl moieties. We refer to these structures as photochromic diarylethene precursors. These diarylethenes have proved to be very useful in the construction of functional molecules with desired properties. On the other hand, in our groups, we have elaborated on diarylethene precursors with modifiable ethene bridges. In this review, we have collected examples of such structures and their chemical modifications, leading to the improvement or fine‐tuning of photochromic switching.