Electronically Rich N-Substituted Tetrahydroisoquinoline 3-Carboxylic Acid Esters: Concise Synthesis and Conformational Studies

Recent work in our laboratory has shown that the highly substituted, electronically rich 1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid (THIQ3CA) scaffold is a key building block for a novel class of promising anticoagulants (Al-Horani et al. J. Med. Chem.2011, 54, 6125-6138). The synthesis of THIQ3CA analogs, especially containing specific, electronically rich substituents, has been a challenge and essentially no efficient methods have been reported in the literature. We describe three complementary, glycine donor-based strategies for high yielding synthesis of highly substituted, electronically rich THIQ3CA esters. Three glycine donors studied herein include hydantoin 1, (±)-Boc-α-phosphonoglycine trimethyl ester 2 and (±)-Z-α-phosphonoglycine trimethyl ester 3. Although the synthesis of THIQ3CA analogs could be achieved using either of the three, an optimal, high yielding approach for the desired THIQ3CA esters was best achieved using 3 in three mild, efficient steps. Using this approach, a focused library of advanced N-arylacyl, N-arylalkyl, and bis-THIQ3CA analogs was synthesized. Variable temperature and solvent-dependent NMR chemical shift studies indicated the presence of two major conformational rotamers in 3:1 proportion for N-arylacyl-THIQ3CA analogs, which were separated by a high kinetic barrier of ~17 kcal/mol. In contrast, N-arylalkyl and bis-THIQ3CA variants displayed no rotamerism, which implicates restricted rotation around the amide bond as the origin for high-barrier conformational interconversion. This phenomenon is of major significance because structure-based drug design typically utilizes only one conformation. Overall, the work presents fundamental studies on the synthesis and conformational properties of highly substituted, electronically rich THIQ3CA analogs.     

Microbial synthesis of natural,semisynthetic, and new-to-nature tetrahydroisoquinoline alkaloids

The tetrahydroisoquinoline (THIQ) moiety forms the backbone of several natural, synthetic, and semisynthetic drugs approved for the treatment of cancer, pain, gout, and various neurodegenerative diseases. Plants synthesize up to 3000 THIQ structures constituting the benzylisoquinoline, phenethylisoquinoline, Amaryllidaceae, and ipecac alkaloid classes. This review outlines the ongoing surge in activity surrounding the production of natural, semisynthetic, and new-to-nature THIQ metabolites in engineered microbial systems. These efforts have accelerated THIQ pathway discovery and engineering, unlocked new domains of chemical space, and spurred the development of highly productive microbial strains synthesizing unprecedented yields of THIQ precursors. Consolidating these advancements into a single bioprocess holds potential to outcompete crop-based manufacturing and total synthesis for the production of high-value THIQ pharmaceuticals at scale.     

Sequential determination of trace amounts of iron and copper in water samples by flow injection analysis with catalytic spectrophotometric detection.

A simple flow injection analysis (FIA) method is described for the sequential determination of iron and copper. The detection method for iron and copper is based on their catalytic activities in the oxidation reaction of N,N-dimethyl-p-phenylenediamine (DPD) with hydrogen peroxide. The sequential determination of iron and copper can be carried out by injecting two sample plugs into the FIA system, sequentially. One injection does not contain triethylenetetramine (TETA), and is used for the sum of iron and copper concentration; the other which contains TETA is used only for the iron concentration. For iron determination, TETA is used as a masking agent of copper. The difference in peak height can be used for the calculation of copper concentration. Under the optimal conditions, the detection limits (3sigma) of 0.01 and 0.07 microg L(-1) were obtained for iron and copper, respectively. The proposed method can be applied to the determination of iron and copper in tap water and bottled-drinking mineral water samples. Good recoveries of the method, 98-103% for iron and 98-106% for copper, were achieved.     

Design of two channel flow cells for simultaneous determination of copper and iron

Two compact double and serial flow cells were designed for simultaneous determination of trace copper and iron ions. 2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino)aniline(5-Br-PSAA) was used as a chromogenic reagent. 5-Br-PSAA reacted with Cu(II) and Fe(II) to form red chelate compounds and did not react with Cu(I) and Fe(III). Based on these characteristics, a three-lines flow system using two channel flow cells was assembled for the simultaneous determination of trace amounts of copper and iron and applied to the assay of ground water.     

New spectrophotometer equipped with long light path length cells and two channel FIA for trace metals

New spectrophotometer was designed for the simultaneous assay of copper and iron using flow injection analysis and moreover, new 50 mm light path cells were equipped in the spectrophotometer to enhance the sensitivity. Both copper and iron at 2-10 ppb level were determined simultaneously and rapidly using water soluble reagent, 5-Br-PSAA. Determination limits were 1 ppb for copper and 1 ppb for iron. Relative standard deviations were about 1%.     

Utilization of activating and masking effects by ligands for highly selective catalytic spectrophotometric determination of copper and iron in natural waters

A kinetic–catalytic spectrophotometric method is proposed for the successive determination of nanogram levels of copper and iron, which is based on their catalytic effects on the oxidative coupling of p-anisidine with N,N-dimethylaniline (DMA) to form a colored compound (λ_max=740 nm) in the presence of hydrogen peroxide at pH 3.2. 2,9-Dimethyl-1,10-phenanthroline (neocuproine) acted as an activator for the copper catalysis, and 1,10-phenanthroline (phen) acted as an activator for the iron catalysis. The selectivity was improved in the presence of diphosphate as a masking agent. The determinable ranges were 0.16–10 ppb for copper and 1–100 ppb for iron, respectively. The relative standard deviations of copper and iron were 1.1 and 0.97% for five determinations of 10 ppb copper and 40 ppb iron. The method was successfully applied to the analyses of copper and iron in tap, well, river and pond waters.     

Role of iron and copper in particulate methane monooxygenase of Methylosinus trichosporium OB3b

The role of iron and copper in particulate methane monooxygenase (pMMO) of Methylosinus trichosporium OB3b is described, and an overview of the enzyme's properties is presented. The pMMO from M. trichosporium OB3b was solubilized in the detergent n-dodecyl--D-maltoside and purified by chromatographic techniques. The enzyme consists of 0.9 iron atoms and 12.8 copper atoms per molecule. The iron site in pMMO may be mononuclear non-heme iron. Copper exists as either copper ion coupled to four nitrogen atoms and/or trinuclear copper cluster wherein copper ions are ferromagnetically coupled.     

Ion paired chromatography of iron (II,III), nickel (II) and copper (II) as their 4,7-Diphenyl-1,10-phenanthroline chelates

A reversed phase ion-paired chromatographic method that can be used to determine trace amounts of iron (II,III), nickel (II) and copper (II) was developed and applied to the determination of iron (II) and iron (III) levels in natural water. The separation of these metal ions as their 4,7-diphenyl-1,10-phenanthroline (bathophenanthroline) chelates on an Inertsil ODS column was investigated by using acetonitrile-water (80/20, v/v) containing 0.06 M perchloric acid as mobile phase and diode array spectrophotometric detection at 250-650 nm. Chromatographic parameters such as composition of mobile phase and concentration of perchloric acid in mobile phase were optimized. The calibration graphs of iron (II), nickel (II) and copper (II) ions were linear (r > 0.991) in the concentration range 0-0.5, 0-2.0 and 0-4.0 mug ml(-1), respectively. The detection limit of iron (II), nickel (II) and copper (II) were 2.67, 5.42 and 18.2 ng ml(-1) with relative standard deviation (n = 5) of 3.11, 5.81 and 7.16% at a concentration level of 10 ng ml(-1) for iron (II) and nickel (II) and 25 ng ml(-1) for copper (II), respectively. The proposed method was applied to the determination of iron(II) and iron(III) in tap water and sea water samples without any interference from other common metal ions.     

The Effect of Iron and Copper as an Essential Nutrient on Mitochondrial Electron Transport System and Lipid Peroxidation in Trichoderma harzianum

Iron and copper are essential nutrients for all living organisms as cofactors of many enzymes and play important roles in electron transport system (ETS) enzymes which have heme and iron–sulfur centers. In the present study, ETS enzymes, namely, succinate dehydrogenase (SDH) and cytochrome c oxidase (COX), activities as well as adenine nucleotides and lipid peroxidation (LPO) levels of eukaryotic model Trichoderma harzianum grown in varied concentrations of iron (0–20 mg/l) and copper (0–25 mg/l) mediums have been examined. SDH and COX activities increased up to 10 mg/l of iron. COX and SDH activities increased significantly up to 15 and 1 mg/l of copper, respectively. ATP and ADP levels showed a positive correlation with SDH activity with respect to iron–copper concentrations. The trends of AMP were similar with those of ATP and ADP for iron concentrations, while AMP levels elevated until 5 mg/l of copper. As an indicative marker of membrane damage, LPO levels increased with iron and copper concentration. In conclusion, iron and copper concentrations are of critical importance on activities of the ETS enzymes besides adenine nucleotides and LPO levels by maintenance of this metal homeostasis.     

A rapid and mercury pollution-free redoximetry determination of total iron in copper ore

A rapid and mercury pollution-free method for the determination of total iron in the presence of copper is described. The sample was decomposed either by an acid attack of hydrochloric acid-nitric acid (1 + 2) or by fusion with sodium peroxide. The ferric ion in the sample solution was amenable to direct reduction to ferrous ion with potassium borohydride in sulphuric acid medium under the catalysis of cupric ion, followed by titration with potassium dichromate using sodium diphenylaminesulfonate as an indicator. After reduction, the iron (II) in the solution was stable for 300 min. The proposed method is free of interference from copper and has been successfully used for the large-scale routine determination of total iron in copper ores showing the same or better degree of precision and accuracy as those obtained by the classic standard stannous chloride-mercuric chloride method with the separation of iron from copper.     

Successive determination of copper and iron by a flow injection-catalytic photometric method using a serial flow cell.

A flow injection-catalytic spectrophotometric method using a serial flow cell was proposed for the successive determination of trace amounts of copper and iron. This method is based on the oxidation coupling of p-anisidine with N,N-dimethylaniline in the presence of hydrogen peroxide to form a dye, which has an absorption maximum at 740 nm. In this indicator reaction, ligands such as 1,10-phenanthroline (phen) and diphosphate were achieved to improve the sensitivity and selectivity. Under the optimal experimental conditions, the determinable ranges were 0.05-5 ppb for copper and 0.5 - 100 ppb for iron, respectively. The RSDs (n = 10) were 0.78% for 0.5 ppb copper(II) and 0.5% for 200 ppb iron(III). The sample throughput was 30 h(-1). The present flow-injection method was applied to the determination of copper and iron in standard river water, tap water, and other natural water samples, and also to the analysis of labile and inert complexes in synthesized samples containing humic acid with copper(II) or iron(III).     

The Preparation of a Novel Polymer Film Based on Salicylaldoxime and its Influence on Aqueous Copper Electrochemistry

Abstract

The metal complexing ligand salicylaldoxime was electropolymerised onto platinum electrodes and the resulting film characterised by reflectance FT-IR spectroscopy. The modified electrode response to aqueous iron, copper, cobalt and lead ions was investigated with the iron(III) and copper(II) ions showing significantly altered electrochemistry. The response of the modified electrode towards aqueous copper ion was found to be directly proportional to copper concentration with little interference from lead ions. The retention of copper ions, film stability and the nature of the film action are discussed along with its potential use in sensor construction.     

A novel straightforward synthesis of enantiopure tetrahydroisoquinoline alkaloids.

A novel, direct,and high-yielding stereoselective method for enantiopure 1-substituted tetrahydroisoquinolines (THIQ) is described. The successful approach, which creates the stereocenter during the formation of the THIQ nucleus is based on (i) formation of chiral 2,3-substituted perhydro-1,3-benzoxazines derived from (-)-8-aminomenthol, (ii) diastereoselective intramolecular ring opening of the N,O-acetal moiety by an arylmetal generated from the substituent at the nitrogen atom in the perhydrobenzoxazine ring, and (iii) removal of the chiral auxiliary appendage. The starting perhydrobenzoxazines are easily prepared from (-)-8-aminomenthol and two different aldehydes, and the intramolecular opening is stereospecific, leading to a single stereoisomer. The method allows the preparation of a wide variety of enantiopure 1-substituted THIQ, with different substituents at C-1, by changing the nature of the starting aldehydes.     

Electron transfer function of kerateine gel and conjugated redox reaction by using the kerateine-immobilized membrane

Kerateine gel, prepared by reducing wool keratin with alkaline 2-mercaptoethanol-urea solution and by partially reoxidizing the dissolved kerateine, reduced iron(III) to iron(II). Reduction of iron(III) was enhanced by addition of copper(II). Reduction of methylene blue (MB) to leuco MB with thioglycollic acid (TGA) as a model compound of wool thiol group was investigated in the presence of copper(II) and intercuticular cementing material (δ_Cu) extracted from wool fiber. It is confirmed that copper(II) is a catalyst for the reduction of MB and the δ_Cu containing copper ion acts as a carrier for electron transfer. Some kerateine/δ_Cu-immobilized hydrophilic polyurethane membranes were prepared. A conjugated redox reaction combining the reduction of MB and the oxidation of TGA was carried out across these membranes.     

Chelating ion-exchangers containing n-substituted hydroxylamine functional groups: Part V. Iron,copper, and uranium separations on Duolite CS-346 resin

The separation of iron(III), copper(II) and uranyl(II) ions from a series of salt solutions by chelating ion exchange on Duolite CS-346 resin by pH control is described. Recoveries of these ions from cobalt and nickel salt solutions were quantitative. Iron may also be separated from copper by selective sorption with pH control, and uranium from iron and copper by selective desorption with sodium carbonate solution as eluent.     

Semi-automatic catalytic titration of metal ion mixtures and its application to metallurgical samples

The semi-automatic catalytic titration of several metal ions and binary mixtures of iron(III) with copper(II), nickel or manganese(II) is described. The 4,4′-dihydroxybenzophenone thiosemicarbazone/hydrogen peroxide system was used in the presence of EDTA or EGTA as inhibitors with copper(II) as catalytic titrant. Two sample aliquots are necessary for the analysis of binary mixtures. In one, both metals are titrated in the presence of EDTA; in the other, only copper, nickel or manganese is titrated with EGTA or EDTA if a masking agent for iron(III) (triethanolamine or fluoride) is added. The iron/metal ratios tolerated range from 1:14 to 13:1 for the 0.2–3.0 μmol range, the relative standard deviation being 1–2%. The method was applied to metallurgical samples with good results.     

Study of the copper effect in iron-gall inks after artificial ageing

Iron-gall inks consist of a mixture of vitriols (sulphates of certain metals), gall nut extracts and arabic gum. The association of the iron(II) sulphate present in vitriols, and the gallic acids present in the gall nut extracts induces, after exposure to oxygen, the formation of dark coloured compounds of ink. In addition to iron, this kind of inks contains other metals, such as copper, zinc, and nickel. Among them, copper could be considered the most important because, owing to its catalytic ability, it can be involved in the processes concerning formation and stability of iron complexes, which are responsible for the ink dark colour. For this purpose, four different iron-gall inks containing increasing amounts of copper sulphate were prepared according to a traditional receipt and applied on paper supports. The ink-stained paper specimens were subjected to an intense analytical program to investigate their chemical and physical modifications after artificial ageing (both temperature/humidity and ultraviolet light ageing). The role of copper in the iron-gall inks was evaluated using optical microscopy, colorimetric measurements, X-ray fluorescence (XRF), X-ray diffraction analysis (XRD), scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDX) and Fourier transform infrared spectroscopy (FTIR). For the evaluation of the oxidation state of iron and copper, X-ray absorption spectroscopy (XANES) was used. All results indicate that the presence of copper in iron-gall ink causes colour variation, affects the migratory behaviour of iron in the paper, increases the formation of secondary products particularly when ageing process based on temperature/humidity variations is considered.     

On-line copper and iron removal and selenium(VI) pre-reduction for the determination of total selenium by flow-injection hydride generation-inductively coupled plasma optical emission spectrometry

Selenium was determined in samples with high copper and iron contents by hydride generation-inductively coupled plasma optical emission spectrometry (HG-ICP-OES) after flow-injection (FI) on-line copper and iron removal and selenium(VI) reduction. A Dowex 1X-8 anion-exchange microcolumn was used for the separation of selenium from copper and iron as their chloro-complexes. Se(VI) was then reduced on-line by heating a PTFE coiled reactor (150 cm long, 0.7 mm i.d.) in a 100°C water bath. After reduction of Se(VI), a 900-μl sample was injected into the carrier stream containing hydrochloric acid and sodium tetrahydroborate to generate the hydride. A limit of detection of 0.4 μg l⁻¹ (RSD 2.3% for 20 μg l⁻¹ selenium) was obtained. The application of the method to Geochemical Standard Reference Samples and copper metal reference materials (MBH) demonstrated that results were in good statistical accordance with certified values.     

Komplexbildung und extraktion von kupfer und eisen sowie gallium mit isomeren langkettigen alkylchinolin-8-olenComplex formation and liquid-liquid extraction of copper,iron and gallium with isomeric long-chain alkylquinolin-8-ols

The extraction of copper(II) and iron(III) with the 5-nonyl-, 5- and 7-decyl- and 5-chloro-7-decyl derivatives of quinolin-8-ol was studied with chloroform, benzene or toluene as the organic solvent. Isomeric extractants show only small differences and are very suitable for the extraction of copper and its separation from iron, similarly to Kelex 100 (7-dodecenylquinolin-8-ol). With these derivatives log K_ex values are ?5.18 to ?6.08 for iron(III) with pH_0,5 = 4.5 to 5, whereas log K_ex values are 1.54 to 1.82 for copper(II) with pH_0,5 ≈ 1.35. The chelates of copper, iron and gallium with isomeric ligands, isolated as the solids, have characteristic differences in melting points and solubilities. To extract gallium from alkalin solution, only 7-alkyl-8-quinolinols proved as favourable.     

Humic and other negatively charged colloids of iron and copper in river water

Iron and copper present as humic and other negatively charged colloids are studied by sorption on indium-treated XAD-2 resin and DEAE-Sephadex A-25 anion exchanger and by filtration. The iron species include colloidal particles consisting of hydrated iron(III) oxide, clay and humic substances and smaller amounts of hydrated iron(III) oxide-clay or -silica aggregates, whereas most of the copper exists as humic complexes.