An enantiopure galactose oxidase model: synthesis of chiral amino alcohols through oxidative kinetic resolution catalyzed by a chiral copper complex

An enantiopure galactose oxidase (GO) enzyme model has been synthesized from readily available (R)-BINAM and Cu(OTf)₂, and the enantiopure GO model has been effectively used in situ as an efficient chiral catalyst for the synthesis of chiral amino alcohols through oxidative kinetic resolution (OKR), where molecular oxygen is used as the sole oxidant. Under the proposed catalytic conditions, both ortho- and para-substituted amino alcohols were resolved with good to excellent enantiomeric excesses through oxidative kinetic resolution.     

Graphene preparation and graphite exfoliation

The synthesis of Graphene is critical to achieving its functions in practical applications. Different methods have been used to synthesis graphene, but graphite exfoliation is considered the simplest way to produce graphene and graphene oxide. In general, controlling the synthesis conditions to achieving the optimum yield, keeping the pristine structure to realize on-demand properties, minimum layers with the smallest lateral size, and minimum oxygen content are the most obstacles experienced by researchers. Each application requires a specific graphene model, graphene oxides GO, or even graphene intercalated compounds (GIC) depending on synthesis conditions and approach. This paper reviewed and summarized the most researches in this field and focusing on exfoliation methods.     

Rational hydrothermal synthesis of graphene quantum dots with optimized luminescent properties for sensing applications

Hydrothermal synthesis using graphene oxide (GO) as a precursor has been used to produce luminescent graphene quantum dots (GQDs). However, such a method usually requires many reagents and multistep pretreatments, while can give rise to GQDs with low quantum yield (QY). Here, we investigated the concentration, the temperature of synthesis, and the pH of the GO solution used in the hydrothermal method through factorial design experiments aiming to optimize the QY of GQDs to reach a better control of their luminescent properties. The best synthesis condition (2 mg/mL, 175 °C, and pH = 8.0) yielded GQDs with a relatively high QY (8.9%) without the need of using laborious steps or dopants. GQDs synthesized under different conditions were characterized to understand the role of each synthesis parameter in the materials' structure and luminescence properties. It was found that the control of the synthesis parameters enables the tailoring of the amount of specific oxygen functionalities onto the surface of the GQDs. By changing the synthesis' conditions, it was possible to prioritize the production of GQDs with more hydroxyl or carboxyl groups, which influence their luminescent properties. The as-developed GQDs with tailored composition were used as luminescent probes to detect Fe³⁺. The lowest limit of detection (0.136 μM) was achieved using GQDs with higher amounts of carboxylic groups, while wider linear range was obtained by GQDs with superior QY. Thus, our findings contribute to rationally produce GQDs with tailored properties for varied applications by simply adjusting the synthesis conditions and suggest a pathway to understand the mechanism of detection of GQDs-based optical sensors.     

The Effect of Temperature Conditions During Graphene Oxide Synthesis on Humidity Dependence of Conductivity in Thermally Reduced Graphene Oxide

In this work, we study the effect of temperature conditions during graphene oxide (OG) synthesis on the conductivity dependence viewed as a function of ambient humidity after thermal reduction of initial GO. GO samples obtained at various temperatures by the modified Hummers’ method were found to contain different quantitative ratios of oxide groups. The relative content of carboxyl groups in the initial GO suspension is shown to affect the humidity dependence of conductivity after GO reduction 150 °С. A humidity dependence mechanism is proposed to explain the obtained characteristics.     

Tuning the nucleophilic attack and the reductive action of glycine on graphene oxide under basic medium

Amino acids are important compounds for GO functionalization because they can improve GO properties for many applications ranging from biomedicine to depollution. However, amino acids can act as nucleophiles or as reducing agents for GO functionalization or reduction, respectively. Hence, we systematically studied the GO functionalization/reduction using glycine as a model amino acid under basic conditions at room temperature. Attenuated total reflectance–Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy, and Raman spectroscopy were used to characterize the modified GO with glycine. We found that low glycine concentrations produced an epoxide ring opening reaction, whereas an increase in glycine concentration led to GO reduction. The basic medium allowed to conserve the carboxylic acid groups, whereas the GO reduction mechanism was governed by the partial hydrolysis of epoxide groups and the subsequent reduction of carboxylic acids to carbonyls. This article opens up the opportunity to study and control the conditions in which different amino acids could be used for either GO functionalization or GO reduction.     

Synthesis,characterization and optical properties of graphene oxide–polystyrene nanocomposites

The synthesis of graphene oxide (GO)–polystyrene (PS) Pickering emulsions, as environment‐friendly nanostructures suitable for novel applications, has received significant attention in recent years. In this work, the synthesis and characterization of GO–PS nanocomposites through seeded emulsion polymerization and the selective light reflection properties of dry films have been reported. Amphiphilic molecule sulfonated 3‐pentadecyl phenol was used as a co‐surfactant to stabilize GO dispersions during the emulsion polymerization process. The particle size of the dispersions as measured by dynamic light scattering decreases from 540 nm, for PS without any GO, to 88 nm with 1 wt% GO content. Scanning electron microscopy studies show a uniform size distribution of the composite particles prepared with GO. The dried films show a structural color that varies with the GO content. The self‐assembly behavior of the dried film was further studied using reflectance spectroscopy, which shows a red shift of the reflectance maximum from 440 to 538 nm as the GO loading was increased from 0.2 to 0.5 wt%, respectively, indicating a different microstructure. X‐ray diffraction, transmission electron microscopy (TEM) and atomic force microscopy (AFM) were used to study the morphology and structure of the composite particles on drying. The AFM study confirms the non‐spherical shape of the particles. Thermogravimetric analysis shows improved thermal decomposition characteristics of the nanocomposite films. Copyright © 2015 John Wiley & Sons, Ltd.     

Localized Plasmon‐Stimulated Nanochemistry of Graphene Oxide on a SERS Substrate

In recent years, there has been remarkable progress in the reduction and functionalization of graphene oxide (GO) using nanoparticles and high‐energy optical photons. Most of these reactions are carried out in solutions, whereas the local modification of GO on solid substrates still remains a challenge. In this work, we demonstrate the local reduction of GO and its further destruction, leading to the synthesis of polyaromatic hydrocarbons (PAHs) stimulated by localized surface plasmons (LSPs). The reduction of GO and the synthesis of PAHs have been carried out on a substrate designed for surface‐enhanced Raman spectroscopy (SERS). We found that LSPs initiate the destruction of water molecules entrapped in the nanogaps between silver nanoparticles after the deposition of GO from the aqueous suspension. It was demonstrated that OH radicals, as a result of water decomposition, initiate the reduction of GO, leading to the synthesis of PAHs. The reactions have been observed in real time by using SERS. The measurement of current–voltage (I–V) characteristics through conductive atomic force microscopy (AFM), recorded in an LSP‐stimulated area, have shown the increased electrical conductivity (more than ten times) compared with the conductivity of GO. The synthesis of new compounds in the LSP‐stimulated area has been confirmed by the appearance of new peaks in the Raman spectra and nonlinear I–V characteristics typical for PAHs. We show that the used method allows the local modification of electrical properties of GO and controlled nanopattering of organic compounds on the surface.     

Hydrothermal Syntheses of NiO−GO Nanocomposite on 3D Nickel Foam as a Support for Pt Nanoparticles and its Superior Electrocatalytic Activity towards Methanol Oxidation

In this project, Pt/NiO?GO nanocatalyst is grown on nickel foam (NF) and, its catalytic activity towards electrochemical oxidation of methanol in acidic media is studied. The first step is devoted to the synthesis of NiO?GO support by a hydrothermal method. Then Pt nanoparticles (～34.3 nm) are electrodeposited on this supporting material. Hydrothermal and electrochemical deposition conditions are optimized. Surface of modified NF was inspected for physical characterization and Chemical composition by some techniques such as field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectra (EDS), and X‐ray diffraction (XRD). In the electrochemical section, the catalytic performance of Pt/NiO?GO/NF towards methanol oxidation is investigated by cyclic voltammetry and chronoamperometry measurements. The electrochemical impedance spectroscopy (EIS) is elected to deliberate charge transfer resistance on the catalyst surface. Mass activity, electrochemical surface area (ECSA) and durability of prepared catalysts are compared with commercial Pt/C. Deliberations prove the superiority of Pt/NiO?GO/NF towards methanol oxidation in acidic media. The Superior quality of synthesized nanocatalyst that is attributed to the synergetic effect of the NiO?GO support material and Pt nanoparticles, indicate that Pt/NiO?GO/NF can be successfully used as the anode in the direct methanol fuel cell (DMFC).     

New functionalization of graphene oxide with N2O2 ligand for efficient loading of Cu nanostructures as a heterogeneous nanocatalyst for the synthesis of β-hydroxy-1,2,3-triazoles

A new and heterogeneous copper complex immobilized on graphene oxide (GO) was prepared. This was achieved through organic functionalization of GO using 1,8-diamino-3,6-dioxaoctane (DADO) and then inorganic coordination of copper on the edges and basal plane of the functionalized GO (GO-DADO-Cu), which was reduced to Cu(0). The chemical structure of the prepared nanocatalyst was analyzed using various techniques. Most of the analyses confirmed the successful anchoring of copper and organic ligand on the GO surface. Moreover, the synthesized nanocatalyst has shown high catalytic activity in the synthesis of β-hydroxy-1,2,3-triazole derivatives under mild reaction conditions (water and room temperature) resulting in good to excellent yields.     

Functional Graphene by Thiol‐ene Click Chemistry

Thiol‐ene click reaction was successfully employed for chemical modification of graphene oxide (GO) by one‐step synthesis. Herein, 2,2‐azobis(2‐methylpropionitrile) (AIBN) was used as thermal catalyst and cysteamine hydrochloride (HS?(CH₂)₂?NH₂HCl) was used as thiol‐containing compound, which is incorporated to GO surface upon reaction with the C=C bonds. The hydrochloride acts as protecting group for the amine, which is finally eliminated by adding sodium hydroxide. The modified GO contains both S‐ and N‐containing groups (NS‐GO). We found that NS‐GO sheets form good dispersion in water, ethanol, and ethylene glycol. These graphene dispersions can be processed into functionalized graphene film. Besides, it was demonstrated that NS‐GO was proved to be an excellent host matrix for platinum nanoparticles. The developed method paves a new way for graphene modification and its functional nanocomposites.     

Experimental and artificial intelligence for modeling the cyclic voltammogram behavior of Pt/reduced graphene oxide nanocatalyst synthesized using gamma irradiation at different experimental conditions of graphene oxide

Journal of Solid State Electrochemistry - Cyclic voltammogram (CV) curves of Pt/graphene on different synthesis conditions of graphene oxide (GO) such as ratio of sulfuric to phosphoric acid and...     

Direct oxidative synthesis of nitrones from aldehydes and primary anilines using graphite oxide and Oxone

One-pot condensation/oxidation of aldehydes and primary anilines into nitrones using graphite oxide (GO) and Oxone as the oxidant under very mild reaction conditions is described. The proposed method provides a direct oxidative synthesis of various nitrones in good to excellent yields under metal-free conditions in short reaction times.     

Recyclable catalysts for the synthesis of heterocyclic compounds using carbon materials

Heterogeneous catalytic reactions play a major role in the industry to produce a number of compounds that are essential in our daily life. Synthesis of heterocyclic compounds using heterogeneous catalysis is one of the rapidly growing research areas. Inherent ability to produce high selectivity and potentiality to recycle, the catalyst makes the heterogeneous systems more attractive, especially on the industrial scale. Various recyclable catalytic systems have been extensively developed for the synthesis of heterocyclic compounds via dehydration, partial oxidations, three-component couplings, dehydrogenations, and others. Different supports like polymers, metal oxides, and quite recently carbon supports like carbon nanotubes (CNTs), graphene oxide (GO), graphitic nitride (GCN), and nitrogenous carbon materials (NGr) have been widely used to synthesize diverse heterocycles. The use of GO in the synthesis of heterocyclic compounds has been reviewed recently, hence we did not focus on GO in this review. The aim of this review article is to explore the emerging areas of carbon-based heterogeneous materials such as CNTs, GCN, and NGr in the synthesis of heterocycles. This review also focused on the most recent examples, their preparation, and recycling studies of highly excited catalytic systems used for the heterocycles.     

Graphene-supported small-sized palladium nanoparticles made by facile photochemical approaches

To achieve small-sized and well-dispersed palladium (Pd) nanoparticles, we make use of effective photochemical approaches to synthesis of clean Pd nanoparticles on the surface of graphene at room temperature. By modulating the photochemical reaction conditions, the size and dispersion of graphene–Pd composites can be well controlled, where PdCl₄²⁻ and graphene oxide (GO) are the reaction precursors, Hantzsch 1,4-dihydropyridine (HEH) is used as an electron donor and an amine-type ligand to stabilize small Pd nanoparticles on the surface of graphene. As a result, the easy and effective photochemical approaches to the graphene–Pd composites with well-dispersed, small-sized Pd nanoparticles and highly conductive reduced GO, are established. Good to excellent yields have also been achieved with the graphene-supported Pd nanoparticles catalysts for the Suzuki coupling reaction.     

Ag/AgBr/graphene oxide nanocomposite synthesized via oil/water and water/oil microemulsions: a comparison of sunlight energized plasmonic photocatalytic activity

In this article, we report that Ag/AgBr nanostructures and the corresponding graphene oxide (GO) hybridized nanocomposite, Ag/AgBr/GO, could be facilely synthesized by means of a surfactant-assisted assembly protocol, where an oil/water microemulsion is used as the synthesis medium. We show that thus-produced nanomaterials could be used as highly efficient and stable plasmonic photocatalysts for the photodegradation of methyl orange (MO) pollutant under sunlight irradiation. Compared with the bare Ag/AgBr nanospecies, Ag/AgBr/GO displays distinctly enhanced photocatalytic activity. More importantly, the as-prepared nanostructures exhibit higher photocatalytic activity than that of the corresponding Ag/AgBr-based nanomaterials synthesized viaa water/oil microemulsion and than that of the corresponding Ag/AgCl-based nanospecies synthesized by an oil/water microemulsion. An explanation has been proposed for these interesting findings. Our results suggest that thus-manufactured Ag/AgBr/GO plasmonic photocatalysts are promising alternatives to the traditional UV light or visible-light driven photocatalysts.     

Protein determination using graphene oxide-aptamer modified gold nanoparticles in combination with Tween 80

Recently, graphene oxide (GO) has shown superiority for disease detection arising from its unique physical and chemical properties. However, proteins adsorbed on the surface of GO prevent sensitivity improvement in fluorescence-based detection methods. In this paper, a label-free method based on aptamer modified gold nanoparticles (GNPs) combined with Tween 80 was shown to solve this problem using the detection of thrombin as an example. An aptamer was designed and bound to thrombin by changing its conformation. Tween 80 was used for rapid and reproducible synthesis of stable DNA-functionalized GNPs and prevented the thrombin from nonspecific binding to GO. Thrombin was detected with a limit of 0.68 pM by taking advantage of the efficient cross-linking effect of aptamer-GNPs to GO. The sensor was validated by determining thrombin concentration in human blood serum samples. The results indicate that this method has promising analytical application in medical diagnostic.     

Graphene Oxide Modified Chemically Activated Graphite Electrodes for Detection of microRNA

In our study, graphene oxide (GO) modified graphite electrodes were used for sensitive and selective impedimetric detection of miRNA. After chemical activation of pencil graphite electrode (PGE) surface using covalent agents (CA), GO modification was performed at the surface of chemically activated PGE. Then, CA‐GO‐PGEs were applied for impedimetric miRNA detection. The microscopic and electrochemical characterization of CA‐GO‐PGEs was performed by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The optimization of experimental conditions; such as GO concentration, DNA probe concentration and miRNA target concentration was performed by using EIS technique. After the hybridization occurred between miRNA‐34a RNA target and its complementary DNA probe, the hybrid was immobilized onto the surface of CA‐GO‐PGEs. Then, the impedimetric detection of miRNA‐DNA hybridization was performed by EIS. The selectivity of our assay was also tested under the optimum experimental conditions.     

基于计算谱学的纳米材料结构表征及其在石墨烯氧化物中的应用

从理论上对材料结构进行表征一般是基于第一性原理电子结构计算对可能的结构模型进行能量分析, 从而得到材料的基态构型. 而经过复杂路径合成的纳米材料并不总是处于基态能量构型. 因此, 对可能的结构模型进行计算谱学模拟, 然后直接与实验谱图对比, 可以提供更为可靠的结构信息. 本文简单介绍了谱学模拟的理论背景, 以石墨烯氧化物为例展示了计算谱学在复杂纳米材料结构表征中的关键作用.     

Quiescent hydrothermal synthesis of reduced graphene oxide–periodic mesoporous silica sandwich nanocomposites with perpendicular mesochannel alignments

Quiescent hydrothermal conditions were applied to synthesis of the sandwich nanocomposites of reduced graphite oxide (rGO) and periodic mesoporous silica (PMS) with vertically aligned mesochannels. It was found that the formation of the PMS–rGO–PMS sandwich structure is very sensitive to the surface and synthesis conditions. Although a higher temperature hydrothermal condition promotes reduction of GO and formation of bulky mesoporous nanoparticles, quiescent hydrothermal condition can serve as an alternative approach to obtain the unusual nanocomposites and slightly promote the structural stability of PMS on the surface of rGO.     

Graphene Oxide Facilitates Solvent‐Free Synthesis of Well‐Dispersed,Faceted Zeolite Crystals

Zeolites with molecular dimension pores are widely used in petrochemical and fine‐chemical industries. While traditional solvothermal syntheses suffer from environmental, safety, and efficiency issues, the newly developed solvent‐free synthesis is limited by zeolite crystal aggregation. Herein, we report well‐dispersed and faceted silicalite ZSM‐5 zeolite crystals obtained using a solvent‐free synthesis facilitated by graphene oxide (GO). The selective interactions between the GO sheets and different facets, which are confirmed by molecular dynamics simulations, result in oriented growth of the ZSM‐5 crystals along the c‐axis. More importantly, the incorporation of GO sheets into the ZSM‐5 crystals leads to the formation of mesopores. Consequently, the faceted ZSM‐5 crystals exhibit hierarchical pore structures. This synthetic method is superior to conventional approaches because of the features of the ZSM‐5 zeolite.