Indigo Carmine in a Food Dye: Spectroscopic Characterization and Determining Its Micro-Concentration through the Clock Reaction

Indigo carmine is a commonly used industrial blue dye. To determine its concentration in a commercially available food dye composed of a mixture of indigo carmine and D-glucose, this paper characterizes it through (ATR, KBr) FTIR micro-Raman as well as UV/Vis and clock: Briggs–Rauscher (BR) oscillatory reaction methods. The indigo carmine was detected in the bulk food dye only by applying micro-Raman spectroscopy, indicating a low percentage of the indigo carmine present. This research provides an improvement in the deviations from the experimental Raman spectrum as calculated by the B97D/cc-pVTZ level of theory one, resulting in a better geometrical optimization of the indigo carmine molecule compared to data within the literature. The analytical curves used to determine indigo carmine concentrations (and quantities) in an aqueous solution of food dye were applied by means of UV/Vis and BR methods. BR yielded significantly better analytical parameters: 100 times lower LOD and LOQ compared to commonly used UV/Vis. The remarkable sensitivity of the BR reaction towards indigo carmine suggests that not only does indigo carmine react in an oscillatory reaction but also its decomposition products, meaning that the multiple oxidation reactions have an important role in the BR’s indigo carmine mechanism. The novelty of this research is the investigation of indigo carmine using a clock BR reaction, opening new possibilities to determine indigo carmine in other complex samples (pharmaceutical, food, etc.).     

Voltammetric Determination of Indigo Carmine and Amaranth on a Silver-Based Mercury Film Electrode

Abstract

The voltammetric behavior of indigo carmine and amaranth on silver-based mercury film electrodes was studied. At pH 4, reduction current peaks were observed at potential ?0.11 V (indigo carmine) and ?0.24 V (amaranth), respectively. The system showed a linear response to both of the food colorants in a concentration range of 0 to 100 ng/ml. Detected at different reduction potentials, indigo carmine and amaranth could be determined separately without interfering with each other. This method demonstrated a better reproducibility and longer life time than the existing techniques.     

Indirect determination of alkaline phosphatase based on the amperometric detection of indigo carmine at a screen-printed electrode in a flow system.

Amperometric analysis of indigo carmine at a bare screen-printed electrode placed in an FIA system is reported. This compound is easily detected at a potential of -0.3 V (vs. Ag pseudo-reference electrode) without observing any fouling of the electrode surface, thus allowing the repetitive use of the same electrode in a reproducible manner (coefficients of variation down to 7% for more than 20 consecutive determinations). A linear range of three orders of magnitude and a limit of detection in the sub-micromolar range were attained for this molecule. Based on these studies, indirect amperometric measurements of alkaline phosphatase (ALP) activity in solution were easily carried out using 3-indoxyl phosphate substrate. Its hydrolysis catalyzed by ALP gave rise to indigo product. This product is insoluble in aqueous solutions but it was easily converted into its soluble parent compound, indigo carmine, by addition of fuming sulfuric acid to the reaction media. Using this approach, we achieved a linear range of more than one order of magnitude and a limit of detection of 1 U/l ALP, for an enzymatic reaction time of 60 min.     

Catalytic Oxidation of Indigo Carmine in the Presence of Silver Nanoparticles: Application to Groundwater Analysis

The oxidation of indigo carmine by potassium hexacyanoferrate(III) is catalyzed by trace of silver nanoparticle (AgNP). The reaction is followed UV‐Vis absorption spectrophotometrically by measuring the change in the absorption spectra (λ_max 612 nm). The catalytic oxidation reaction is used for the quantification of indigo carmine. The calibration graph was linear in the concentration range 50 nM—1.8 μM of indigo carmine. The variables affecting the method have been optimized. The method is applied to the determination of indigo carmine in groundwater samples with the satisfactory results.     

The Biodegradation of Indigo Carmine by Bacillus safensis HL3 Spore and Toxicity Analysis of the Degradation Products

The aims of this article were to investigate Bacillus safensis HL3 spore for its capacity to degrade and detoxify indigo carmine and to provide an effective biological agent for the treatment of isatin dye wastewater. Bacillus safensis HL3 spore was found to decolorize indigo carmine by 97% in the presence of acetosyringone within 2 h. Significantly increased activities of spore laccase, intracellular tyrosinase, and lignin peroxidase upon exposure to indigo carmine were observed. The results of RT–qPCR also showed that the expression of laccase gene was significantly increased. The spore has the ability to degrade indigo carmine through oxidization. Furthermore, the pathway by which indigo carmine is degraded was investigated using liquid chromatography–mass spectrometry analysis to identify the biodegradation products. A detailed pathway of indigo carmine degradation by bacterial spores was proposed for the first time. Toxicity tests indicated that the biodegradation products of indigo carmine are non-toxic to Nicotiana tabacum seeds and are less hazardous to human erythrocytes than the original dye. Indigo carmine is a typical recalcitrant dye and severely jeopardizes human health. The results demonstrate the utility of the spore from Bacillus safensis HL3 for the degradation of indigo carmine and simultaneous reduction of its toxicity.     

Simultaneous kinetic spectrophotometric determination of vanadium(V) and iron(III)

Vanadium(V) and iron(III) can be determined simultaneously at pH 2 and 25 degrees C by a single experiment using their kinetic effect on the oxidation of indigo carmine by bromate which goes through an induction period and then decreases in absorbance, at lambda(max), 612 nm. The rate of the color-fading of indigo carmine is proportional to the concentration of vanadium and is independent of the concentration of iron. The length of the induction period of the reaction is related to the concentration of iron and is independent of the concentration of vanadium. Concentrations of 0.3-2 (mug ml(-1)) vanadium(V) and 6-12 (mug ml(-1)) iron(III) were determined with mean relative errors of 2.7 and 1.6%, respectively. The interference effects of various cations and anions on determination of mixtures of vanadium and iron is reported. Application of the method to real samples and several mixtures of standard solutions are performed which gave acceptable results.     

Highly selective DNA biosensor based on the long-range electron transfer of indigo carmine through DNA duplex

We have developed a highly selective DNA biosensor. It was based on the long-range electron transfer (LRET) from the electroactive dye indigo carmine (IC) through the DNA duplex on a glassy carbon electrode. Voltammetric experiments showed that IC interacts with dsDNA through a typical intercalative mode with a relatively strong affinity of 2.3(±0.6)?×?10⁶?M^-1. If incubated with DNA in IC solution, no response was observed with the ssDNA-modified probe electrode. However, a pair of well-defined redox peak was observed with a DNA-hybridized electrode, proving the presence of LRET on the biosensor. The biosensor also can differentiate complementary sequences, non-complementary sequences, and even the mutated sequences with single-base mismatches at different sites.

Rapid kinetic determination of silver (I), using in-cuvette mixing and computerized data acquisition

 The determination of silver(I) based on its catalytic effect on the oxidation of indigo carmine with hexacyanoferrate(III) is described. The reaction is monitored spectrophotometrically by means of a home-made rapid system with computer data acquisition. The decrease in absorbance of indigo carmine at 612 nm, pH 6 and at a fixed concentration of hexacyanoferrate(III) and indigo carmine is proportional to the concentration of Ag(I). The acquired data based on the initial rate and fixed time are processed. Up to 100.0 μg/ml of silver are determined. The limit of detection and average relative standard deviation are 0.13 μg/ml and 1.9%, respectively. The effect of foreign ions on the determination of silver is also discussed. The proposed method is applied to the determination of Ag(I) in expired photographic film. Received: 17 June 1996 / Revised: 26 July 1996 / Accepted: 2 August 1996     

流动注射催化动力学光度法测定碘离子

Based on catalysis of I- on the decolor reaction between potassium bromate and indigo carmine in the acid medium,and combined with flow injection analysis,a new flow-injection catalytic kinetic spectrophotometric method was found for determination of iodide in sample.The experimental results show that the determination is carried out at temperature of 80℃ and the concentration of H_2SO_4,KBrO_3,and indigo carmine is 1.2 mol/L,1.8×10~(-2) mol/L and 1.0×10~(-4) mol/L respectively,the linear range for the method is 0.50～1.8 mg/L.The detection limit is 0.0022 mg/L.The relative standard deviation is 1.92%.The proposed method was applied to the determination of iodide in troche successfully.The recovery was between 99.2% and 103.6%.     

Voltammetric determination of alkaline phosphatase and horseradish peroxidase activity using 3-indoxyl phosphate as substrate Application to enzyme immunoassay

The use of 3-indoxyl phosphate (3-IP) as an electrochemical substrate for ELISAs with voltammetric detection was investigated. Indirect measurements of alkaline phosphatase (AP) and horseradish peroxidase (HRP) activity in solution were carried out. Picomolar levels of both enzymes can be detected, which enables the design of electrochemical immunoassays using this substrate. The enzymatic turnover of the substrate gives indigo blue, insoluble in aqueous solutions. This product is easily converted into its soluble parent compound, indigo carmine (IC), by addition of fuming sulphuric acid to the reaction media. IC shows a reversible voltammetric peak at the formal potential of −0.15 V (versus Ag pseudo-reference electrode) when a screen-printed carbon electrode (SPCE) is used. The peak current of this process constitutes the analytical signal. Using this approach an ELISA assay to quantify pneumolysin (PLY, a toxin related to respiratory infections) was carried out using AP or HRP as enzymatic label. Calibration plots obtained are reported. 3-IP is demonstrated to be the first suitable substrate for the two most common enzyme labels used in immunoassays.     

Comparative adsorption studies of indigo carmine dye on chitin and chitosan

The adsorption of indigo carmine dye onto chitin and chitosan from aqueous solutions was followed in a batch system. The ability of these materials to adsorb indigo carmine dye from aqueous solution was followed through a series of adsorption isotherms adjusted to a modified Langmuir equation. The maximum number of moles adsorbed was 1.24 +/- 0.16 x 10(-5) and 1.54 +/- 0.03 x 10(-4) mol g(-1) for chitin and chitosan, respectively. The same interactions were calorimetrically followed and the thermodynamic data showed exothermic enthalpic values of -40.12 +/- 3.52 and -29.25 +/- 1.93 kJ mol(-1) for chitin and chitosan, respectively. Gibbs free energies for the two adsorption processes of indigo carmine dye presented a positive value for chitin and a negative one for chitosan, reflecting that dye/surface interactions are thermodynamic favorable for chitosan and nonspontaneous for chitin at 298.15 K. The interaction processes were accompanied by an increase of entropy value for chitosan (90 +/- 6 J mol(-1)K(-1)) and a decrease for chitin (-145 +/- 13 J mol(-1)K(-1)). Thus, dye/chitosan interaction showed favorable enthalpic and entropic processes, reflecting thermodynamic stability of the formed complex, while dye/chitin interaction showed an exothermic enthalpic value and a highly nonfavorable entropic effect, resulting in a nonspontaneous thermodynamic system.     

Kinetic spectrophotometric determination of sulfide, using in-cuvette mixing and titration techniques with computerized data acquisition

In-cuvette mixing and titration techniques have been used for the kinetic determination of sulfide based on its inhibition effect on the oxidation of indigo carmine with hexacyanoferrate(III) in the presence of silver. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of indigo carmine at 612 nm. Both initial rate and fixed-time methods were applied to the in-cuvette technique. Using in-cuvette mixing, sulfide up to 1800 ng was determined and detection limit and relative standard deviation for the determination of 120 ng of sulfide were calculated as 23.0 ng and 1.59%, respectively. On the basis of the titration technique, the upper limit of determination was 25 μg of sulfide and detection limit and average relative standard deviation for the determination of 1 μg of sulfide were 0.025 μg and 4.95%, respectively. The effect of foreign ions on the sulfide determination was studied. The proposed methods were applied to the determination of sulfide in water.     

Electrospray ionization mass spectrometry monitoring of indigo carmine degradation by advanced oxidative processes

The degradation of the dye indigo carmine in aqueous solution induced by two oxidative processes (H(2)O(2)/iodide and O(3)) was investigated. The reactions were monitored by electrospray ionization mass spectrometry in the negative ion mode, ESI(-)-MS, and the intermediates and oxidation products characterized by ESI(-)-MS/MS. Both oxidative systems showed to be highly efficient in removing the color of the dye aqueous solutions. In the ESI(-)-MS of the indigo carmine solution treated with H(2)O(2) and H(2)O(2)/iodide, the presence of the ions of m/z 210 (indigo carmine in its anionic form, 1), 216, 226, 235, and 244 was noticeable. The anion of m/z 235 was proposed to be the unprecedented hydroperoxide intermediate 2 formed in solution via an electrophilic attack by hydroxyl and hydroperoxyl radicals of the exocyclic C=C bond of 1. This intermediate was suggested to be rapidly converted into the anionic forms of 2,3-dioxo-1H-indole-5-sulfonic acid (3, m/z 226), 2-amino-alpha-oxo-5-sulfo-benzeneacetic acid (4, m/z 244), and 2-amino-5-sulfo-benzoic acid (5, m/z 216). In the ESI(-)-MS of the indigo carmine solution treated with O(3), two main anions were detected: m/z 216 (5) and 244 (4). Both products were proposed to be produced via an unstable ozonide intermediate. Other anions in this ESI(-) mass spectrum were attributed to be [4 - H + Na](-) of m/z 266, [4 - H](2-) of m/z 121.5, and [5 - H](2-) of m/z 107.5. ESI-MS/MS data were consistent with the proposed structures for the anionic products 2-5.     

Microdetermination of dissolved oxygen in water by a rapid spectrophotometric method

A spectrophotometric method utilizing the dye indigo carmine has been applied to the analysis of dissolved oxygen in water samples. Oxygen concentration has been determined by the decrease in absorbance at 410 mμ of reduced indigo carmine solutions oxidized by dissolved oxygen. A simple modification of the sample compartment of a Bausch and Lomb Spectronic 20 or 340 spectrophotometer allows rapid and accurate measurements to be made within 3 min. Dissolved oxygen in the ranges of 0 to 10% and 0 to 100% saturation can be analyzed without many of the interferences inherent in the standard Winkler method.     

光催化剂Sm2FeSbO7的制备及光物理和光催化性能表征

首次采用固相反应法制备了新型光催化剂Sm₂FeSbO₇,有效地降解了水中有机污染物。利用X射线衍射、扫描电镜、X射线光电子能谱、傅里叶变换红外光谱、透射电子显微镜和紫外－可见光谱仪对Sm₂FeSbO₇的结构和光催化性能进行了表征。Sm₂FeSbO₇为烧绿石型结构,立方晶系和空间群Fd3m结晶。Sm₂FeSbO₇的晶格参数a为1.035 434 nm。Sm₂FeSbO₇的带隙经估算为2.46 eV。用Sm₂FeSbO₇作为光催化剂在可见光照射下降解靛蓝胭脂红,并与氮掺杂TiO₂对比。结果表明,与掺氮TiO₂相比,Sm₂FeSbO₇在可见光照射下光催化降解靛蓝胭脂红显示出较高的光催化活性。总有机碳的减少,无机产物的逐渐形成,SO₄^2-和NO₃^-以及CO₂的演变揭示了在光催化过程中靛蓝胭脂红的连续矿化。检测了一些来自光催化降解靛蓝胭脂红的中间体,如邻硝基苯甲酸和邻硝基苯甲醛,并获得了可能的靛蓝胭脂红光催化降解路径。     

Analysis of the conversion of indigo into indigo carmine dye using SERRS

In a novel application SERRS has been used, by employing a silver sol, to monitor and analyse the conversion of indigo into the indigo carmine dye.     

Kinetic spectrophotometric determination of sulfide, using in-cuvette mixing and titration techniques with computerized data acquisition

In-cuvette mixing and titration techniques have been used for the kinetic determination of sulfide based on its inhibition effect on the oxidation of indigo carmine with hexacyanoferrate(III) in the presence of silver. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of indigo carmine at 612 nm. Both initial rate and fixed-time methods were applied to the in-cuvette technique. Using in-cuvette mixing, sulfide up to 1800 ng was determined and detection limit and relative standard deviation for the determination of 120 ng of sulfide were calculated as 23.0 ng and 1.59%, respectively. On the basis of the titration technique, the upper limit of determination was 25 μg of sulfide and detection limit and average relative standard deviation for the determination of 1 μg of sulfide were 0.025 μg and 4.95%, respectively. The effect of foreign ions on the sulfide determination was studied. The proposed methods were applied to the determination of sulfide in water. Received: 10 March 1999 / Revised: 9 June 1999 / Accepted: 12 June 1999     

The Role of Interfacial Reactions in Determining Plasma–Liquid Chemistry

In this work, we investigate the production of highly oxidative species in solutions exposed to a self-pulsed corona discharge in air. We examine how the properties of the target solution (pH, conductivity) and the discharge power affect the discharge stability and the production of H₂O₂. Indigo carmine, a common organic dye, is used as an indicator of oxidative strength and in particular, hydroxyl radical (OH^·) production. The observed rate of indigo oxidation in contact with the discharge far exceeds that predicted from reactions based on concentrations of species measured in the bulk solution. The generation of H₂O₂ and the oxidation of indigo carmine indicate a high concentration of highly oxidizing species such as OH^· at the plasma–liquid interface. These results indicate that reactions at the air plasma–liquid interface play a dominant role in species oxidation during direct non-equilibrium atmospheric pressure plasma treatment.     

光催化剂Sm2FeSbO7的制备及光物理和光催化性能表征

首次采用固相反应法制备了新型光催化剂Sm₂FeSbO₇,有效地降解了水中有机污染物。利用X射线衍射、扫描电镜、X射线光电子能谱、傅里叶变换红外光谱、透射电子显微镜和紫外-可见光谱仪对Sm₂FeSbO₇的结构和光催化性能进行了表征。Sm₂FeSbO₇为烧绿石型结构,立方晶系和空间群Fd3m结晶。Sm₂FeSbO₇的晶格参数a为1.035 434 nm。Sm₂FeSbO₇的带隙经估算为2.46 eV。用Sm₂FeSbO₇作为光催化剂在可见光照射下降解靛蓝胭脂红,并与氮掺杂TiO₂对比。结果表明,与掺氮TiO₂相比,Sm₂FeSbO₇在可见光照射下光催化降解靛蓝胭脂红显示出较高的光催化活性。总有机碳的减少,无机产物的逐渐形成,SO₄^2-和NO₃^-以及CO₂的演变揭示了在光催化过程中靛蓝胭脂红的连续矿化。检测了一些来自光催化降解靛蓝胭脂红的中间体,如邻硝基苯甲酸和邻硝基苯甲醛,并获得了可能的靛蓝胭脂红光催化降解路径。     

Adsorption Characteristics of Activated Carbon for the Reclamation of Eosin Y and Indigo Carmine Colored Effluents and New Isotherm Model

The adsorption response of eosin Y and indigo carmine acid dyes on activated carbon as a function of system temperature for a fixed concentration was investigated at various temperatures via adsorption isotherms and their thermodynamic quantities such as enthalpy, entropy, and Gibbs free energy changes. The adsorption data were exploited to develop a new adsorption isotherm. The new isotherm was developed with the spirit of solid–liquid phase equilibrium and regular solution theory. The proposed model has four adjustable constants and correlates adsorption isotherm in terms of the system temperature and melting temperature of the dye. The effect of pH on the removal of acid dyes was reported. The pH variation was observed to affect the adsorption efficiency. The removal of eosin Y and indigo carmine decreased from 99.4% to 82.6% and 92.38% to 79.48%, respectively, when the pH of the solution varied from 2 to 12. The thermodynamic analysis of the process reveals that the process of the removal of acid dyes is exothermic and spontaneous. Moreover, the kinetics parameters of the batch process are reported.