Preparation and characterization of Pd modified CeO2 nanoparticles for photocatalytic degradation of dye

The aim of this work was to investigate the structural and optical properties of bare cerium dioxide (CeO₂) and Pd-doped CeO₂ (0.5, 1.0, 1.5 and 2.0 wt%) photocatalysts prepared by a combination of homogeneous precipitation and the impregnation method. X–ray diffraction analysis indicated that all samples were composed of the cubic fluorite phase of CeO₂. Scanning electron micrographs revealed that all samples provided mostly spherical morphology with high agglomeration and estimated particle sizes ranging from 10 to 20 nm in diameter. The XPS core-level spectra of Pd species after incorporating 2.0 wt% Pd–doped CeO₂ showed double peaks with binding energies of Pd3d_5/2 and Pd3d_3/2 corresponding to the Pd²⁺ oxidation state. The results from diffuse reflectance UV–visible spectroscopy showed that doping with Pd increased the absorbance onset of CeO₂ to a longer wavelength, while the band gap decreased from 3.0 eV to 2.8 eV with 2.0% Pd doping concentration. This was likely due to the creation of impurity levels of Pd²⁺ inside the conduction and valence bands of CeO₂. The photoluminescence spectra (PL) indicated that the emission peak intensity of CeO₂ decreased in the presence of Pd²⁺ dopant in CeO₂. This was associated with a decrease in the electron–hole recombination rate for electronically-excited. Photocatalytic activity for methyl orange dye degradation under visible light irradiation of 1.0 wt% Pd–doped CeO₂ was determined as the optimal doping level with photocatalytic activity 5 times higher than that of bare CeO₂ photocatalyst.     

Influence of CeO2 addition on the physicochemical and catalytic properties of Pd/TiO2 catalysts in CO oxidation

The influence of CeO₂ addition on the formation of the microstructure, electronic state, and catalytic properties of Pd/TiO₂ supported catalysts in CO oxidation were investigated. It was shown that, when Pd is supported on titanium dioxide modified with cerium dioxide, annealing at 500°C results in the formation of Pd/(CeO₂-TiO₂) catalysts with a nanocrystalline structure composed of incoherently intergrown fine anatase crystals and interblock boundaries in which palladium and cerium are stabilized. The higher catalytic activity of Pd/(CeO₂-TiO₂) catalysts compared to Pd/TiO₂ catalysts is explained by the smaller size of Pd particles and the higher proportion of palladium in the Pd^δ+ state.     

Effect of excess halide on the palladium‐catalyzed insertion‐triggered radical copolymerization of methyl acrylate and 1‐hexene

[Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) is a very efficient initiator of the radical polymerization of methyl acrylate, but it is not active in the polymerization of methyl methacrylate or in the copolymerization with 1‐hexene. The addition of an excess of NBu₄Cl to solutions of [Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) provides an initiator system that copolymerizes methyl acrylate and 1‐hexene by an insertion‐triggered radical mechanism. Random copolymers are obtained with 11% incorporation of 1‐hexene in moderate yields (about 35%). Studies of the decomposition products obtained after the first insertion of methyl acrylate in the Pd? C₆F₅ bond of 1 show that the addition of excess halide in the presence of monomer favors the homolytic cleavage of the Pd? C bond, and the generation of the radicals that are active species in the polymerization, versus alternative evolution pathways. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5682–5691, 2006     

Hydrodeoxygenation of Vicinal OH Groups over Heterogeneous Rhenium Catalyst Promoted by Palladium and Ceria Support

Heterogeneous ReO_x–Pd/CeO₂ catalyst showed excellent performance for simultaneous hydrodeoxygenation of vicinal OH groups. High yield (>99 %), turnover frequency (300 h^?1), and turnover number (10 000) are achieved in the reaction of 1,4‐anhydroerythritol to tetrahydrofuran. This catalyst can be applied to sugar alcohols, and mono‐alcohols and diols are obtained in high yields (≥85 %) from substrates with even and odd numbers of OH groups, respectively. The high catalytic performance of ReO_x–Pd/CeO₂ can be assigned to rhenium species with +4 or +5 valence state, and the formation of this species is promoted by H₂/Pd and the ceria support.     

Organo‐Palladium(II)‐Verbindungen mit PdC4‐Koordination: Phenylethinyl‐ und Methylphenylethinylkomplexe

Tetrakis(p‐tolyl)oxalamidinato‐bis[acetylacetonatopalladium(II)] ([Pd₂(acac)₂(oxam)]) reacted with Li–C≡C–C₆H₅ in THF with formation of [Pd(C≡C–C₆H₅)₄Li₂(thf)₄] ( 1a ). Reaction of [Pd₂(acac)₂(oxam)] with a mixture of 6 equiv. Li–C≡C–C₆H₅ and 2 equiv. LiCH₃ resulted in the formation of [Pd(CH₃)(C≡C–C₆H₅)₃Li₂(thf)₄] ( 2 ), and the dimeric complex [Pd₂(CH₃)₄(C≡C–C₆H₅)₄Li₄(thf)₆] ( 3 ) was isolated upon reaction of [Pd₂(acac)₂(oxam)] with a mixture of 4 equiv. Li–C≡C–C₆H₅ and 4 equiv. LiCH₃. 1 – 3 are extremely reactive compounds, which were isolated as white needles in good yields (60–90%). They were fully characterized by IR, ¹H‐, ¹³C‐, ⁷Li‐NMR spectroscopy, and by X‐ray crystallography of single crystals. In these compounds Li ions are bonded to the two carbon atoms of the alkinyl ligand. 1a reacted with Pd(PPh₃)₄ in the presence of oxygen to form the already known complexes trans‐[Pd(C≡C–C₆H₅)₂(PPh₃)₂] and [Pd(η²‐O₂)(PPh₃)₂]. In addition, 1a is an active catalyst for the Heck coupling reaction, but less active in the catalytic Sonogashira reaction.     

CO2 Hydrogenation over Oxide‐Supported PtCo Catalysts: The Role of the Oxide Support in Determining the Product Selectivity

By simply changing the oxide support, the selectivity of a metal–oxide catalysts can be tuned. For the CO₂ hydrogenation over PtCo bimetallic catalysts supported on different reducible oxides (CeO₂, ZrO₂, and TiO₂), replacing a TiO₂ support by CeO₂ or ZrO₂ selectively strengthens the binding of C,O‐bound and O‐bound species at the PtCo–oxide interface, leading to a different product selectivity. These results reveal mechanistic insights into how the catalytic performance of metal–oxide catalysts can be fine‐tuned.     

Mild and Selective Catalytic Hydrogenation of the C=C Bond in α,β‐Unsaturated Carbonyl Compounds Using Supported Palladium Nanoparticles

Chemoselective reduction of the C=C bond in a variety of α,β‐unsaturated carbonyl compounds using supported palladium nanoparticles is reported. Three different heterogeneous catalysts were compared using 1 atm of H₂: 1) nano‐Pd on a metal–organic framework (MOF: Pd⁰‐MIL‐101‐NH₂(Cr)), 2) nano‐Pd on a siliceous mesocellular foam (MCF: Pd⁰‐AmP‐MCF), and 3) commercially available palladium on carbon (Pd/C). Initial studies showed that the Pd@MOF and Pd@MCF nanocatalysts were superior in activity and selectivity compared to commercial Pd/C. Both Pd⁰‐MIL‐101‐NH₂(Cr) and Pd⁰‐AmP‐MCF were capable of delivering the desired products in very short reaction times (10–90 min) with low loadings of Pd (0.5–1 mol %). Additionally, the two catalytic systems exhibited high recyclability and very low levels of metal leaching.     

Exploring the Oxidative‐Addition Pathways of Phenyl Chloride in the Presence of PdII Abnormal N‐Heterocyclic Carbene Complexes: A DFT Study

DFT calculations were performed to elucidate the oxidative addition mechanism of the dimeric palladium(II) abnormal N‐heterocyclic carbene complex 2 in the presence of phenyl chloride and NaOMe base under the framework of a Suzuki–Miyaura cross‐coupling reaction. Pre‐catalyst 2 undergoes facile, NaOMe‐assisted dissociation, which led to monomeric palladium(II) species 5 , 6 , and 7 , each of them independently capable of initiating oxidative addition reactions with PhCl. Thereafter, three different mechanistic routes, path a, path b, and path c, which originate from the catalytic species 5 , 7 , and 6 , were calculated at M06‐L ‐D3(SMD)/LANL2TZ(f)(Pd)/6–311++G**//M06‐L/LANL2DZ(Pd)/6–31+G* level of theory. All studied routes suggested the rather uncommon Pd^II/Pd^IV oxidative addition mechanism to be favourable under the ambient reaction conditions. Although the Pd⁰/Pd^II routes are generally facile, the final reductive elimination step from the catalytic complexes were energetically formidable. The Pd^II/Pd^IV activation barriers were calculated to be 11.3, 9.0, 26.7 kcal mol^?1 (ΔΔ^≠G_L^S‐D3) more favourable than the Pd^II/Pd⁰ reductive elimination routes for path a, path b, and path c, respectively. Out of all the studied pathways, path a was the most feasible as it comprised of a Pd^II/Pd^IV activation barrier of 24.5 kcal mol^?1 (ΔG_L^S‐D3). To further elucidate the origin of transition‐state barriers, EDA calculations were performed for some key saddle points populating the energy profiles.     

Controllable Synthesis of Nearly Monodisperse Spherical Aggregates of CeO2 Nanocrystals and Their Catalytic Activity for HCHO Oxidation

Herein, we report a facile surfactant‐assisted solvothermal synthetic method to prepare nearly monodisperse spherical CeO₂ nanocrystals. A good control of the size of CeO₂ nanocrystals in the range of 100–500 nm was achieved by simply varying the synthetic parameters such as reaction time, volume ratio of ethanol to water (R), molar ratio of PVP, and concentration of Ce(NO₃)₃?6 H₂O in solution. A possible mechanism for the growth of spherical CeO₂ nanocrystals is proposed. The obtained CeO₂ nanocrystals with a surface area of up to 47 m²g^?1 were then employed as a catalyst support. By loading Au‐Pd nanoparticles (about 3 wt. %) onto the CeO₂ support, an Au‐Pd/CeO₂ catalyst was prepared that exhibited high catalytic activity for HCHO oxidation. At the low temperature of 50 °C, the percentage of HCHO conversion was 100 %, suggesting potential applications in preferential oxidation and other catalytic reactions. These Au‐Pd/CeO₂ catalysts may also find applications in indoor formaldehyde decontamination and industrial catalysis. The facile solvothermal method can be extended to the preparation of other metal oxide nanocrystals and provides guidance for size‐ and morphology‐controlled synthesis.     

Synthesis and physicochemical characterization of palladium-cerium oxide catalysts for the low-temperature oxidation of carbon monoxide

The effect of CeO₂ preparation procedure on the electronic and structural states of the active component of Pd/CeO₂ catalysts and their activity in the low-temperature reaction of CO oxidation was studied. The following two nonequivalent states of palladium were detected in the catalysts having low-temperature activity using XPS and IR spectroscopy: Pd⁰(Pd^δ+) as the constituent of a palladium-reduced interaction phase and Pd²⁺ as the constituent of a palladium-oxidized interaction phase Pd _x CeO_{2 ?δ}. It was found that the procedure used for preparing a CeO₂ support considerably affected the formation of these phases and quantitative ratios between them. It was demonstrated that the palladium-oxidized interaction phase was responsible for low-temperature activity, whereas the palladium-reduced interaction phase was responsible for activity in the region of medium and high temperatures.     

Supported Pd–Cu Bimetallic Nanoparticles That Have High Activity for the Electrochemical Oxidation of Methanol

Monodisperse bimetallic Pd–Cu nanoparticles with controllable size and composition were synthesized by a one‐step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd₈₅–Cu₁₅, Pd₅₆–Cu₄₄, and Pd₃₉–Cu₆₁. The nanoparticles were separated from the solution mixture by extraction with non‐polar solvents, such as n‐hexane. Monodisperse bimetallic Pd–Cu nanoparticles with narrow size‐distribution were obtained without the need for a size‐selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as‐prepared nanoparticles were loaded onto a Vulcan XC‐72 carbon support. Supported bimetallic Pd–Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd–Cu catalyst that contained 15 % Cu, the activity was even comparable to the state‐of‐the‐art commercially available Pt/C catalysts. A STEM‐HAADF study indicated that the formation of random solid‐solution alloy structures in the bimetallic Pd₈₅–Cu₁₅/C catalysts played a key role in improving the electrochemical activity.     

The Role of Pd2+/Pd0 in Hydrogenation by [Pd(2‐pymo)2]n: An X‐ray Absorption and IR Spectroscopic Study

The metal–organic framework (MOF) [Pd(2‐pymo)₂]_n (2‐pymo=2‐pyrimidinolate) was used as catalyst in the hydrogenation of 1‐octene. During catalytic hydrogenation, the changes at the metal nodes and linkers of the MOF were investigated by in situ X‐ray absorption spectroscopy (XAS) and IR spectroscopy. With the help of extended X‐ray absorption fine structure and X‐ray absorption near edge structure data, Quick‐XAS, and IR spectroscopy, detailed insights into the catalytic relevance of Pd²⁺/Pd⁰ in the hydrogenation of 1‐octene could be achieved. Shortly after exposure of the catalyst to H₂ and simultaneously with the hydrogenation of 1‐octene, the aromatic rings of the linker molecules are hydrogenated rapidly. Up to this point, the MOF structure remained intact. After completion of linker hydrogenation, the linkers were also protonated. When half of the linker molecules were protonated, the onset of reduction of the Pd²⁺ centers to Pd⁰ was observed and the hydrogenation activity decreased, followed by fast reduction of the palladium centers and collapse of the MOF structure. Major fractions of Pd⁰ are only observed when the hydrogenation of 1‐octene is almost finished. Consequently, the Pd²⁺ nodes of the MOF [Pd(2‐pymo)₂]_n are identified as active centers in the hydrogenation of 1‐octene.     

Delivery of Highly Active Noble‐Metal Nanoparticles into Microspherical Supports by an Aerosol‐Spray Method

Noble metal nanoparticles (NPs) with 1–5 nm diameter obtained from NaHB₄ reduction possess high catalytic activity. However, they are rarely used directly. This work presents a facile, versatile, and efficient aerosol‐spray approach to deliver noble‐metal NPs into metal oxide supports, while maintaining the size of the NPs and the ability to easily adjust the loading amount. In comparison with the conventional spray approach, the size of the loaded noble‐metal nanoparticles can be significantly decreased. An investigation of the 4‐nitrophenol hydrogenation reaction catalyzed by these materials suggests that the NPs/oxides catalysts have high activity and good endurance. For 1 % Au/CeO₂ and Pd/Al₂O₃ catalysts, the rate constants reach 2.03 and 1.46 min^?1, which is much higher than many other reports with the same noble‐metal loading scale. Besides, the thermal stability of catalysts can be significantly enhanced by modifying the supports. Therefore, this work contributes an efficient method as well as some guidance on how to produce highly active and stable supported noble‐metal catalysts.     

Pincer‐Type Heck Catalysts and Mechanisms Based on PdIV Intermediates: A Computational Study

Pincer‐type palladium complexes are among the most active Heck catalysts. Due to their exceptionally high thermal stability and the fact that they contain Pd^II centers, controversial Pd^II/Pd^IV cycles have been often proposed as potential catalytic mechanisms. However, pincer‐type Pd^IV intermediates have never been experimentally observed, and computational studies to support the proposed Pd^II/Pd^IV mechanisms with pincer‐type catalysts have never been carried out. In this computational study the feasibility of potential catalytic cycles involving Pd^IV intermediates was explored. Density functional calculations were performed on experimentally applied aminophosphine‐, phosphine‐, and phosphite‐based pincer‐type Heck catalysts with styrene and phenyl bromide as substrates and (E)‐stilbene as coupling product. The potential‐energy surfaces were calculated in dimethylformamide (DMF) as solvent and demonstrate that Pd^II/Pd^IV mechanisms are thermally accessible and thus a true alternative to formation of palladium nanoparticles. Initial reaction steps of the lowest energy path of the catalytic cycle of the Heck reaction include dissociation of the chloride ligands from the neutral pincer complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Cl)] [X=NH, R=piperidinyl ( 1 a ); X=O, R=piperidinyl ( 1 b ); X=O, R=iPr ( 1 c ); X=CH₂, R=iPr ( 1 d )] to yield cationic, three‐coordinate, T‐shaped 14e^? palladium intermediates of type [{2,6‐C₆H₃(XPR₂)₂}Pd]⁺ ( 2 ). An alternative reaction path to generate complexes of type 2 (relevant for electron‐poor pincer complexes) includes initial coordination of styrene to 1 to yield styrene adducts [{2,6‐C₆H₃(XPR₂)₂}Pd(Cl)(CH₂?CHPh)] ( 4 ) and consecutive dissociation of the chloride ligand to yield cationic square‐planar styrene complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(CH₂?CHPh)]⁺ ( 6 ) and styrene. Cationic styrene adducts of type 6 were additionally found to be the resting states of the catalytic reaction. However, oxidative addition of phenyl bromide to 2 result in pentacoordinate Pd^IV complexes of type [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(C₆H₅)]⁺ ( 11 ), which subsequently coordinate styrene (in trans position relative to the phenyl unit of the pincer cores) to yield hexacoordinate phenyl styrene complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(C₆H₅)(CH₂?CHPh)]⁺ ( 12 ). Migration of the phenyl ligand to the olefinic bond gives cationic, pentacoordinate phenylethenyl complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(CHPhCH₂Ph)]⁺ ( 13 ). Subsequent β‐hydride elimination induces direct HBr liberation to yield cationic, square‐planar (E)‐stilbene complexes with general formula [{2,6‐C₆H₃(XPR₂)₂}Pd(CHPh?CHPh)]⁺ ( 14 ). Subsequent liberation of (E)‐stilbene closes the catalytic cycle.     

A Raman spectroscopy study of cerium oxide in a cerium–5 wt.% lanthanum alloy

This paper describes a study of a cerium–5 wt.% lanthanum (Ce–5 wt.% La) alloy using Raman spectroscopy and X-ray diffraction (XRD). Examination of the alloy microstructure by optical microscopy and Raman spectroscopy revealed the presence of inclusions which were identified as cerium oxide (CeO₂). The study also highlighted the need to avoid excessive laser power during acquisition of the Raman spectra as this appeared to cause the oxidation of the region being analysed where previously no cerium oxide peak had been detected. The propensity of cerium to oxidise in air results in the formation of a CeO₂ layer on the surface of the alloy. Raman spectroscopy of the oxide layer formed on the alloy after exposure to air for 21 days found that the Raman peak denoting cerium oxide was seen at between 5 and 7 cm⁻¹ lower than the value for CeO₂ (465 cm⁻¹). This is attributed to a combination of a sub-stoichiometric oxide layer and the presence of La in the alloy.     

Providing Support in Favor of the Existence of a PdII/PdIV Catalytic Cycle in a Heck‐Type Reaction

The complex [Pd(O,N,C‐L)(OAc)], in which L is a monoanionic pincer ligand derived from 2,6‐diacetylpyridine, reacts with 2‐iodobenzoic acid at room temperature to afford the very stable pair of Pd^IV complexes (OC‐6‐54)‐ and (OC‐6‐26)‐[Pd(O,N,C‐L)(O,C‐C₆H₄CO₂‐2)I] (1.5:1 molar ratio, at ?55 °C). These complexes and the Pd^II species [Pd(O,N,C‐L)(OX)] and [Pd(O,N,C‐L′)(NCMe)]ClO₄, (X=MeC(O) or ClO₃, L′=another monoanionic pincer ligand derived from 2,6‐diacetylpyridine), are precatalysts for the arylation of CH₂?CHR (R?CO₂Me, CO₂Et, Ph) using IC₆H₄CO₂H‐2 and AgClO₄. These catalytic reactions have been studied and a tentative mechanism is proposed. The presence of two Pd^IV complexes was detected by ESI(+)‐MS during the catalytic process. All the data obtained strongly support a Pd^II/Pd^IV catalytic cycle.     

Two isomers of Pd2(S2NC7H4)4

The dichloromethane solvates of the isomers tetrakis(μ‐1,3‐benzothiazole‐2‐thiolato)‐κ⁴N:S;κ⁴S:N‐dipalladium(II)(Pd—Pd), (I), and tetrakis(μ‐1,3‐benzothiazole‐2‐thiolato)‐κ⁶N:S;κ²S:N‐dipalladium(II)(Pd—Pd), (II), both [Pd₂(C₇H₄NS₂)₄]·CH₂Cl₂, have been synthesized in the presence of (o‐isopropylphenyl)diphenylphosphane and (o‐methylphenyl)diphenylphosphane. Both isomers form a lantern‐type structure, where isomer (I) displays a regular and symmetric coordination and isomer (II) an asymmetric and distorted structure. In (I), sitting on an centre of inversion, two 1,3‐benzothiazole‐2‐thiolate units are bonded by a Pd—N bond to one Pd atom and by a Pd—S bond to the other Pd atom, and the other two benzothiazolethiolate units are bonded to the same Pd atoms by, respectively, a Pd—S and a Pd—N bond. In (II), three benzothiazolethiolate units are bonded by a Pd—N bond to one Pd atom and by a Pd—S bond to the other Pd atom, and the fourth benzothiazolethiolate unit is bonded to the same Pd atoms by, respectively, a Pd—S bond and a Pd—N bond.     

Characterization of a New Tetranuclear Cluster of Palladium, [Pd4(dppm)4(H)]—

The recently discovered and characterized [Pd₄(dppm)₄(H)]²⁺ cluster catalyst ( 1 ; dppm = Ph₂PCH₂PPh₂), slowly evolves in the presence of the reducing tetraphenylborate anion, to generate a new diamagnetic cluster [Pd₄(dppm)₄(H)]⁺ ( 2 ). The evolution of this starting material 1 , has been monitored using NMR (¹H and ³¹P), UV‐vis and ESR spectroscopy. This new 56‐electron Pd cluster has been characterized from X‐ray crystallography, and consists of a cyclic species exhibiting an approximate puckered square structure. The Pd₂ bond distances are 2.7367(10) and 2.7495(11)Å and indicate the presence of weak bonding. The diagonal Pd···Pd separations are 3.646(10) and 3.590(10)Å indicating that the square is relatively symmetric. Such a structure is unprecedented for “Pd_x(dppm)_x” species. Although not formally observed from the X‐ray data, the hydride is assumed to be fluxional as found in 1 . The cyclic voltammogram for 2 exhibits an irreversible reduction wave at —1.65V vs SCE which is greater than that found for 1 , and corroborates the lower oxidation state for Pd (+1/2). The Pd‐H bonding scheme and MO symmetry for a model cluster where the hydride has been placed at the center of the Pd₄ frame, have been addressed qualitatively using the EHMO model. These calculations demonstrate clearly that the Pd‐H bonding is strong.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Palladium(II) Acetylide Complexes with Pincer‐Type Ligands: Photophysical Properties,Intermolecular Interactions,and Photo‐cytotoxicity

Two classes of cationic palladium(II) acetylide complexes containing pincer‐type ligands, 2,2′:6′,2′′‐terpyridine (terpy) and 2,6‐bis(1‐butylimidazol‐2‐ylidenyl)pyridine (C^N^C), were prepared and structurally characterized. Replacing terpy with the strongly σ‐donating C^N^C ligand with two N‐heterocyclic carbene (NHC) units results in the Pd^II acetylide complexes displaying phosphorescence at room temperature and stronger intermolecular interactions in the solid state. X‐ray crystal structures of [Pd(terpy)(C≡CPh)]PF₆ ( 1 ) and [Pd(C^N^C)(C≡CPh)]PF₆ ( 7 ) reveal that the complex cations are arranged in a one‐dimensional stacking structure with pair‐like Pd^II⋅⋅⋅Pd^II contacts of 3.349 Å for 1 and 3.292 Å for 7 . Density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) calculations were used to examine the electronic properties. Comparative studies of the [Pt(L)(C≡CPh)]⁺ analogs by ¹H NMR spectroscopy shed insight on the intermolecular interactions of these Pd^II acetylide complexes. The strong Pd−C_carbene bonds render 7 and its derivative sufficiently stable for investigation of photo‐cytotoxicity under cellular conditions.