Atomically Precise Multimetallic Semiconductive Nanoclusters with Optical Limiting Effects

For the first time, multinuclear noble‐metal clusters have been successfully stabilized by Ti‐oxo clusters. Two unprecedented Ag₆@Ti₁₆‐oxo nanoclusters with precise atomic structures were prepared and characterized. The octahedral Ag₆ core has strong Ag?Ag bonds (ca. 2.7 Å), and is further stabilized by direct Ag?O?Ti coordination interactions. Moreover, as a result of different acidic/redox conditions in synthesis, the Ag₆ core can adopt diverse geometric configurations inside the Ti₁₆‐O shell. Correspondingly, structural differences greatly influence their optical limiting effects. The transmittance reduction activity of the clusters towards 532 nm laser shows a nearly linear concentration dependence, and can be optimized up to about 43 %. This work not only opens a new direction for multimetallic semiconductive nanoclusters with interesting optical properties, but also provides molecular models for important noble‐metal/TiO₂ heterogeneous materials.     

Au130−xAgx Nanoclusters with Non‐Metallicity: A Drum of Silver‐Rich Sites Enclosed in a Marks‐Decahedral Cage of Gold‐Rich Sites

The synthesis and structure of atomically precise Au_130?xAg_x (average x=98) alloy nanoclusters protected by 55 ligands of 4‐tert‐butylbenzenethiolate are reported. This large alloy structure has a decahedral M₅₄ (M=Au/Ag) core. The Au atoms are localized in the truncated Marks decahedron. In the core, a drum of Ag‐rich sites is found, which is enclosed by a Marks decahedral cage of Au‐rich sites. The surface is exclusively Ag?SR; X‐ray absorption fine structure analysis supports the absence of Au?S bonds. The optical absorption spectrum shows a strong peak at 523 nm, seemingly a plasmon peak, but fs spectroscopic analysis indicates its non‐plasmon nature. The non‐metallicity of the Au_130?xAg_x nanocluster has set up a benchmark to study the transition to metallic state in the size evolution of bimetallic nanoclusters. The localized Au/Ag binary architecture in such a large alloy nanocluster provides atomic‐level insights into the Au?Ag bonds in bimetallic nanoclusters.     

Ion-exchange synthesis and improved photovoltaic performance of CdS/Ag2S heterostructures for inorganic-organic hybrid solar cells

A facile ultrasound-assisted ion exchange route was developed for the synthesis of CdS/Ag₂S heterojunctions by ion exchange between the nanostructured CdS film and [Ag(NH₃)₂]⁺ under ultrasonication. The CdS/Ag₂S heterojunction film was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis DRS spectroscopy, photoelectrochemical measurements, and the transient photovoltage (TPV) technique. CdSAg₂S heterojunctions exhibit a dense morphology, enhanced visible light absorption and stronger photocurrent response than the pure CdS films. Poly(3-hexylthiophene) (P3HT) was then spin coated into the CdS/Ag₂S framework. Hybrid solar cells constructed with FTO/CdS/Ag₂S/P3HT/Au display relatively higher power conversion efficiency than FTO/CdS/P3HT/Au.     

The Origin of the Photoluminescence Enhancement of Gold‐Doped Silver Nanoclusters: The Importance of Relativistic Effects and Heteronuclear Gold–Silver Bonds

The weak photoluminescence of silver nanoclusters prevents their broad application as luminescent nanomaterials. Recent experiments, however, have shown that gold doping can significantly enhance the photoluminescence intensity of Ag₂₉ nanoclusters but the molecular and physical origins of this effect remain unknown. Therefore, we have computationally explored the geometric and electronic structures of Ag₂₉ and gold‐doped Ag_29?xAu_x (x=1–5) nanoclusters in the S₀ and S₁ states. We found that 1) relativistic effects that are mainly due to the Au atoms play an important role in enhancing the fluorescence intensity, especially for highly doped Ag₂₆Au₃, Ag₂₅Au₄, and Ag₂₄Au₅, and that 2) heteronuclear Au?Ag bonds can increase the stability and regulate the fluorescence intensity of isomers of these gold‐doped nanoclusters. These novel findings could help design doped silver nanoclusters with excellent luminescence properties.     

Ag2Au50(PET)36 Nanocluster: Dimeric Assembly of Au25(PET)18 Enabled by Silver Atoms

The assembly of atomically precise metal nanoclusters offers exciting opportunities to gain fundamental insights into the hierarchical assembly of nanoparticles. However, it is still challenging to control the assembly of individual nanoclusters at a molecular or atomic level. Herein, we report the dimeric assembly of Au₂₅(PET)₁₈ (PET=2‐phenylethanethiol), where two Au₂₅(PET)₁₈ monomers are bridged together by two Ag atoms to form the Ag₂Au₅₀(PET)₃₆ dimer. The Ag₂Au₅₀(PET)₃₆ dimer is a unique mesomer, which has not been found in any other chiral metal nanoclusters. Furthermore, the Ag₂Au₅₀(PET)₃₆ dimer is distinct from the Au₂₅(PET)₁₈ monomer in its optical, electronic, and catalytic properties. This study is expected to provide a feasible strategy to precisely modulate the assembly of metal nanoclusters with controllable structures and properties.     

Discrete Silver(I)‐Palladium(II)‐Oxo Nanoclusters, {Ag4Pd13} and {Ag5Pd15}, and the Role of Metal–Metal Bonding Induced by Cation Confinement

We introduce the class of discrete silver(I)‐palladium(II)‐oxo nanoclusters with the preparation of {Ag₄Pd₁₃} and {Ag₅Pd₁₅}. Both polyanions represent the first examples of noble metal‐capped polyoxo‐noble‐metalates in a fully inorganic assembly, featuring an unprecedented host–guest mode containing hetero‐ and homometallic Ag–Pd and Ag–Ag bonding interactions. Comprehensive theoretical calculations suggest that the Ag–Pd metallic bonds originate partially from surface confinement of Ag^I guest ions onto the anionic polyoxopalladate host that is induced by strong electrostatic forces. This work opens the field of fully inorganic silver‐palladium‐oxo nanoclusters, which can be considered as discrete mixed noble metal precursors for the formation of monodisperse core–shell nanoparticles, with high relevance for catalysis.     

Converting Ag2SCdS and Ag2SZnS into AgCdS and AgZnS Nanoheterostructures by Selective Extraction of Sulfur

A mild three‐step solution strategy is developed to prepare Ag? MS (M=Zn, Cd) nanoheterostructures composed of MS nanorods with silver tips. First, Ag₂S? MS heterostructures are synthesized by following a solution–liquid–solid mechanism with Ag₂S nanoparticles as catalysts, then the Ag₂S sections of the heterostructures are converted into silver nanoparticles by selective extraction of sulfur. Notably, for the prepared Ag? CdS heterostructures, the localized surface plasmon resonance of silver remarkably intensifies the photoluminescence of CdS by enhancing the excitation light absorption, which is beneficial for potential applications of CdS nanoparticles in the fields of biolabeling, light‐emitting diodes, and so forth. The strategy reported herein would be useful for designing and fabricating other metal–semiconductor hybrid nanostructures with desirable performances.     

Photoluminescence properties of Ag2S semiconductor clusters synthesized in micropores and mesopores

Silver sulfide (Ag₂S) clusters were synthesized in microporous zeolites and mesoporous AlMCM-41 by the sulfurization of Ag⁺ ions exchanged within the pores of the host. Characterization was performed by means of XRD, UV-Vis Ag K-edge XAFS and photoluminescence. The pore size of the host has great effects on the photoluminescence properties. Ag₂S/AlMCM-41 showed photoluminescence at the longer wavelengths than Ag₂S/zeolites. The photoluminescence band of Ag₂S in the zeolite with 1-dimensional channels was narrow in comparison to the Ag₂S in zeolites with 2- or 3-dimensional channels.     

Synthesis and Characterization of Silver Sulfide Nanoparticles Containing Sol-Gel Derived HPC-Silica Film for Ion-Selective Electrode Application

Silver sulfide nanoparticles dispersed in sol-gel derived hydroxypropyl cellulose (HPC)-silica films have been successfully synthesized using H₂S gas diffusion method. This is the first attempt to produce silver sulfide nanoparticles using this technique. Ag₂S nanoparticles are generated through reaction of H₂S gas with AgNO₃ precursor dissolved in the HPC-silica matrix. Transmission electron microscope (TEM) and atomic force microscope (AFM) analysis reveal nanoparticles size distribution from 2.5 nm to 56 nm for H₂S gas exposed sample. The surface chemistry of Ag₂S nanoparticles and sol-gel derived HPC-silica matrix is confirmed by X-ray photoelectron spectroscopy (XPS). The negative shifts in the core-level XPS Ag (3d) binding energy of Ag₂S nanoparticles are attributed to Ag : S surface atomic ratio exhibited by these nanoparticles with varying processing conditions. Following processing and characterization, suitability of the present method to produce silver sulfide ion-selective electrode is demonstrated by depositing Ag₂S nanoparticles on a graphite rod. The high reponse function of the electrode is due to the presence of nanoparticles.     

Interfacial Engineering in PtNiCo/NiCoS Nanowires for Enhanced Electrocatalysis and Electroanalysis

Searching for new anti-poisoning Pt-based catalysts with enhanced activity for alcohol oxidation is the key in direct alcohol fuel cells (DAFCs). However, in the traditional strategy for designing bimetallic or multimetallic alloy is still difficult to achieve a satisfactory heterogeneous electrocatalyst because the activity often depends on only the surface atoms. Herein, we fabricate the multicomponent active sites by creating a sulfide structure on 1D PtNiCo trimetallic nanowires (NWs), to give a PtNiCo/NiCoS interface NWs (IFNWs). Owing to the presence of sulfide interfaces, the PtNiCo/NiCoS IFNWs enable an impressive methanol/ethanol oxidation reaction (MOR/EOR) performance and excellent anti-CO poisoning tolerance. They have the MOR and EOR mass activities of 2.25 Amg^-1_Pt and 1.62 Amg^-1_Pt, around 1.26, 3.21 and 1.46, 2.96 times higher than those of PtNiCo NWs and commercial Pt/C, respectively. CO-stripping and XPS measurements further demonstrate that the new interfacial structure and optimal bonding of Pt−CO can result in accelerating the removal of surface adsorbed carbonaceous intermediates. Moreover, such a unique structure has also demonstrated a much-improved ability for the electrochemical detection of some important molecules (H₂O₂ and NH₂NH₂).     

Micro-Raman Spectroscopy of Nanostructured Silver Sulfide

Nanostructured silver sulfide powder with an average particle size of about 45 nm, an acanthite α-Ag₂S monoclinic structure (space group P2₁/c), and nonstoichiometric composition Ag_1.93S has been synthesized by the chemical deposition method. The silver sulfide nanopowder has been studied by Raman spectroscopy. According to the Raman scattering data, heating the nanopowder with high-power laser radiation in air leads to photoinduced decomposition of the Ag_1.93S nanopowder to give silver metal. The Raman spectrum of the silver sulfide nanopowder shows a series of bands in the low-frequency range from 90 to 260 cm^–1 associated with vibrations of silver atoms, Ag–S bonds, and symmetric Ag–S–Ag longitudinal modes. Raman spectroscopy confirmed an acanthite monoclinic structure of synthesized silver sulfide nanopowder.     

Structurally Precise Silver Sulfide Nanoclusters Protected by Rhodium(III) Octahedra with Aminothiolates

A 60‐nuclear silver sulfide nanocluster with a highly positive charge ( 1 ) has been synthesized by mixing an octahedral Rh^III complex with 2‐aminoethanethiolate ligands, silver(I) nitrate, and d ‐penicillamine in water under mild conditions. The spherical surface of 1 is protected by the chiral octahedral Rh^III complex, with cleavage of the C?S bond of the d ‐penicillamine supplying the sulfide ions. Although 1 does not contain d ‐penicillamine, it is optically active because of the enantiomeric excess of the Rh^III molecules induced by chiral transfer from d ‐penicillamine. 1 can accommodate/release external Ag⁺ ions and replace inner Ag⁺ ions by Cu⁺ ions. The study demonstrates that a thiolato metal complex and sulfur‐containing amino acid can be used as cluster‐surface‐protecting and sulfide‐supplying regents, respectively, for creating chiral, water‐soluble, structurally precise silver sulfide nanoclusters, the properties of which are tunable through the addition/removal/exchange of Ag⁺ ions.     

Structure of the Au23−xAgx(S‐Adm)15 Nanocluster and Its Application for Photocatalytic Degradation of Organic Pollutants

Ligands play an important role in determining the atomic arrangement within the metal nanoclusters. Here, we report a new nanocluster [Au_23?xAg_x(S‐Adm)₁₅] protected by bulky adamantanethiol ligands which was obtained through a one‐pot synthesis. The total structure of [Au_23?xAg_x(S‐Adm)₁₅] comprises an Au_13?xAg_x icosahedral core, three Au₃(SR)₄ units, and one AgS₃ staple motif in contrast to the 15‐atom bipyramidal core previously seen in [Au_23?xAg_x(SR)₁₆]. UV/Vis spectroscopy indicates that the HOMO–LUMO gap of [Au_23?xAg_x(S‐Adm)₁₅] is 1.5 eV. DFT calculations reveal that [Au₁₉Ag₄(S‐Adm)₁₅] is the most stable structure among all structural possibilities. Benefitting from Ag doping, [Au_23?xAg_x(S‐Adm)₁₅] exhibits drastically improved photocatalytic activity for the degradation of rhodamine B (RhB) and phenol under visible‐light irradiation compared to Au₂₃ nanoclusters.     

An Ultrastable,Small {Ag7}5+ Nanocluster within a Triangular Hollow Polyoxometalate Framework

Small Ag_n nanoclusters (n<10) have been emerging as promising materials as sensing, biolabeling, and catalysis because of their unique electronic states and optical properties. However, studying synthesis, structure determination, and exploration of their properties remain major challenges as a result of the low stability of small Ag nanoclusters. Herein, we synthesized an atomically precise face‐centered‐cubic‐type small {Ag₇}⁵⁺ nanocluster supported by a novel triangular hollow polyoxometalate (POM) framework [Si₃W₂₇O₉₆]^18?. The cluster showed unique {Ag₇}⁵⁺‐to‐POM charge transfer bands in both visible and UV light regions. Furthermore, this small {Ag₇}⁵⁺ nanocluster exhibited an unprecedented ultrastability in solution, despite having exposed Ag sites that can be accessed by small molecules, such as O₂, water, and solvents.     

反应性模板法合成硫化银中空球-银纳米粒子异质结构

以Cu₂S中空球为反应性模板, 通过在水溶液中与银离子的阳离子交换和氧化还原反应制备了大小均匀的Ag₂S中空球-Ag纳米粒子异质结构, 即Ag₂S-Ag异质中空球. 该异质结构中每个Ag₂S中空球的直径约为600 nm, 壁厚约20–30 nm, 其表面均附着一个Ag纳米粒子. 采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)和能量色散X射线谱(EDS)对所得Ag₂S-Ag异质中空球的结构和组成进行了表征. 若以CuS中空球为反应性模板, 在相似转化条件下则主要得到不含Ag粒子的Ag₂S中空球. 该结果表明, Cu₂S中的Cu(I)的还原性在Ag₂S-Ag异质中空球的形成中发挥了重要作用. 通过对所制备的Ag₂S-Ag异质中空球进行二次生长, 还可以得到Ag₂S中空球的半球表面均被Ag膜所包覆的Ag₂S-Ag异质中空球.     

High‐Level Incorporation of Silver in Gold Nanoclusters: Fluorescence Redshift upon Interaction with Hydrogen Peroxide and Fluorescence Enhancement with Herbicide

High‐level incorporation of Ag in Au nanoclusters (NCs) is conveniently achieved by controlling the concentration of Ag⁺ in the synthesis of bovine serum albumin (BSA)‐protected Au NCs, and the resulting structure is determined to be bimetallic Ag₂₈Au₁₀‐BSA NCs through a series of characterizations including energy‐dispersive X‐ray spectroscopy, mass spectroscopy, and X‐ray photoelectron spectroscopy, together with density functional theory simulations. Interestingly, the Ag₂₈Au₁₀ NCs exhibit a significant fluorescence redshift rather than quenching upon interaction with hydrogen peroxide, providing a new approach to the detection of hydrogen peroxide through direct comparison of their fluorescence peaks. Furthermore, the Ag₂₈Au₁₀ NCs are also used for the sensitive and selective detection of herbicide through fluorescence enhancement. The detection limit for herbicide (0.1 nm ) is far below the health value established by the U.S. Environmental Protection Agency; such sensitive detection was not achieved by using AuAg NCs with low‐level incorporation of Ag or by using the individual metal NCs.     

Templated Atom‐Precise Galvanic Synthesis and Structure Elucidation of a [Ag24Au(SR)18]− Nanocluster

Synthesis of atom‐precise alloy nanoclusters with uniform composition is challenging when the alloying atoms are similar in size (for example, Ag and Au). A galvanic exchange strategy has been devised to produce a compositionally uniform [Ag₂₄Au(SR)₁₈]^? cluster (SR: thiolate) using a pure [Ag₂₅(SR)₁₈]^? cluster as a template. Conversely, the direct synthesis of Ag₂₄Au cluster leads to a mixture of [Ag_25?xAu_x(SR)₁₈]^?, x=1–8. Mass spectrometry and crystallography of [Ag₂₄Au(SR)₁₈]^? reveal the presence of the Au heteroatom at the Ag₂₅ center, forming Ag₂₄Au. The successful exchange of the central Ag of Ag₂₅ with Au causes perturbations in the Ag₂₅ crystal structure, which are reflected in the absorption, luminescence, and ambient stability of the particle. These properties are compared with those of Ag₂₅ and Ag₂₄Pd clusters with same ligand and structural framework, providing new insights into the modulation of cluster properties with dopants at the single‐atom level.     

Au57Ag53(C≡CPh)40Br12: A Large Nanocluster with C1 Symmetry

The controlled synthesis and structure determination of a bimetallic nanocluster Au₅₇Ag₅₃(C≡CPh)₄₀Br₁₂ (Au₅₇Ag₅₃) is presented. The metal core has a four‐shell Au₂M₃@Au₃₄@Ag₅₁ @Au₂₀ (M=1/3 Au+2/3 Ag) architecture. In contrast to the previously reported large nanoclusters that have highly symmetric kernel structures, the metal atoms in Au₅₇Ag₅₃ are arranged in an irregular manner with C₁ symmetry. This cluster exhibits excellent thermal stability and is robust under oxidative or basic conditions. The silver precursors play a key role in dictating the structures of the nanoclusters, which suggests the importance of the counteranions used.     

ChemInform Abstract: A 200‐Fold Quantum Yield Boost in the Photoluminescence of Silver‐Doped AgxAu25‐x Nanoclusters: The 13th Silver Atom Matters.

Two series of Ag‐doped Ag_xAu_25‐x nanoclusters are prepared by two different routes.     

Miniaturized Reference Electrodes. II. Use in Corrosive,Biological, and Organic Media

In a recent paper [9] we reported the manufacturing and performance of miniaturized reference electrodes (MREs) with low sensitivity to chloride ions and pH. Here, we demonstrate the wide range applicability of a MRE based on an Ag/Ag₂S internal reference element (IRE), imbedded in a photopolymerized hydrogel of improved composition, which contains the supporting electrolyte. Exchange current density, temperature coefficient, impedance value, and the voltammetric and potentiometric use of the Ag/Ag₂S‐based MRE are discussed relative to the previously reported Ag/AgSCN, Ag/Ag₃PO₄, and Ag/AgCl‐based MREs. No special or extensive conditioning is required when moving these MREs from aqueous supporting electrolyte to an organic solution or from one organic medium to another, and the equilibration time in a new medium is very rapid (<6 min). The new Ag/Ag₂S MRE has a highly stable potential in various media, including aqueous solutions (salt buffers and 20 wt.% H₂SO₄), biological samples (bovine serum albumin), mixed aqueous‐organic, and organic supporting electrolytes (methanol, ethanol, acetonitrile, propylene carbonate, methylene chloride, and DMSO). This is particularly advantageous when in the course of the electrochemical analysis an organic solution is being added to an aqueous supporting electrolyte. Such MREs are suitable for analyses of μL sample volumes and for use in protein‐containing media.