Globally, efficient oil‐water separation for surfactant‐stabilized oil‐water emulsions has been in urgent demand. The current options available for separation are neither sustainable nor resistant to fouling. Herein, we introduce a hierarchically nanostructured TiO2/Fe2O3 composite membrane, which is capable of separating surfactant‐stabilized oil‐water emulsions with high separation efficiency. The high oil rejection rate is contributed by the acquisition of an interconnected delicate network and underwater superoleophobic interface. Meanwhile, its self‐cleaning function promote the facile recovery of the contaminated membrane. Furthermore, the mechanical flexible characteristic of the TiO2/Fe2O3 composite membrane widens its applicability in industrial employment. Thanks to these properties, this novel membrane can be considered as a practical option for treating surfactant‐stabilized oil‐water emulsions. 相似文献
Conventional polymer membranes suffer from low flux and serious fouling when used for treating emulsified oil/water mixtures. Reported herein is the fabrication of a novel superhydrophilic and underwater superoleophobic poly(acrylic acid)‐grafted PVDF filtration membrane using a salt‐induced phase‐inversion approach. A hierarchical micro/nanoscale structure is constructed on the membrane surface and endows it with a superhydrophilic/underwater superoleophobic property. The membrane separates both surfactant‐free and surfactant‐stabilized oil‐in‐water emulsions under either a small applied pressure (<0.3 bar) or gravity, with high separation efficiency and high flux, which is one to two orders of magnitude higher than those of commercial filtration membranes having a similar permeation property. The membrane exhibits an excellent antifouling property and is easily recycled for long‐term use. The outstanding performance of the membrane and the efficient, energy and cost‐effective preparation process highlight its potential for practical applications. 相似文献
Membranes with special functionalities, such as self‐cleaning, especially those for oil/water separation, have attracted much attention due to their wide applications. However, they are difficult to recycle and reuse after being damaged. Herein, we put forward a new N‐substituted polyurethane membrane concept with self‐healing ability to address this challenge. The membrane obtained by electrospinning has a self‐cleaning surface with an excellent self‐healing ability. Importantly, by tuning the membrane composition, the membrane exhibits different wettability for effective separation of oil/water mixtures and water‐in‐oil emulsions, whilst still displaying a self‐healing ability and durability against damage. To the best of our knowledge, this is the first report to demonstrate a self‐healing membrane for oil/water separation, which provides the fundamental research for the development of advanced oil/water separation materials. 相似文献
A novel bi‐functional Janus cotton fabric is used to separate oil from oil‐in‐water emulsions. This fabric is superhydrophobic on one surface and polyamine‐bearing on the other. When used as a filter, the polyamine‐bearing side causes the micrometer‐sized oil droplets to coalesce. The coalesced oil then fills fabric pores on the superhydrophobic side and selectively permeates it. Oil separation using this method is rapid and the separated oil is pure. Furthermore, the content of the model oil hexadecane (HD) in water after a separation can be reduced to less than 0.03±0.03 vol %. These features demonstrate the practical potential of this technology. 相似文献
Poly(N‐ispropylacrylamide) [PNIPAM] is a widely studied polymer for use in biological applications due to its lower critical solution temperature (LCST) being so close to the human body temperature. Unfortunately, attempts to combine carbon nanotubes (CNTs) with PNIPAM have been unsuccessful due to poor interactions between these two materials. In this work, a PNIPAM copolymer with 1 mol‐% pyrene side group [p‐PNIPAM] was used to produce a thermoresponsive polymer capable of stabilizing both single and multi‐walled carbon nanotubes (MWNTs) in water. The presence of pyrene in the polymer chain lowers the LCST less than 4 °C and the interaction with nanotubes does not show any influence on LCST. Moreover, p‐PNIPAM stabilized nanotubes show a temperature‐dependent dispersion in water that allows the level of nanotube exfoliation/bundling to be controlled. Cryo‐TEM images, turbidity, and viscosity of these suspensions were used to characterize these thermoresponsive changes. This ability to manipulate the dispersion state of CNTs in water with p‐PNIPAM will likely benefit many biological applications, such as drug delivery, optical sensors, and hydrogels.
The biomimetic dynamic behaviours of emulsions are receiving increasing attention from the broad scientific community; however, the spatiotemporal control and functionalization of emulsions based on simple fusion‐induced method is rarely mentioned. A design for protein‐stabilized oil‐in‐water droplets and phospholipid‐stabilized oil‐in‐water droplets is described and a substance‐diffusion‐mediated fusion mechanism proposed within these two different emulsion communities. Significantly, a range of fusion‐induced high‐order behaviours were successfully demonstrated including competitive fusion, fusion‐induced evolution in membrane complexity, and diversified structures with the formation of Janus or various patchy morphologies, fusion‐induced membrane maturation, as well as fusion‐induced multifunctionalization with a directional motility behaviour. These results highlight the fusion‐induced diverse dynamic behaviours in complex emulsions communities and provide a platform for advancing versatile applications of emulsions. 相似文献
Derived from a strategically chosen hexafluorinated dicarboxylate linker aimed at the designed synthesis of a superhydrophobic metal–organic framework (MOF), the fluorine‐rich nanospace of a water‐stable MOF ( UHMOF‐100 ) exhibits excellent water‐repellent features. It registered the highest water contact angle (≈176°) in the MOF domain, marking the first example of an ultrahydrophobic MOF. Various experimental and theoretical studies reinforce its distinctive water‐repellent characteristics, and the conjugation of superoleophilicity and unparalleled hydrophobicity of a MOF material has been coherently exploited to achieve real‐time oil/water separation in recyclable membrane form, with significant absorption capacity performance. This is also the first report of an oil/water separating fluorinated ultrahydrophobic MOF‐based membrane material, with potential promise for tackling marine oil spillages. 相似文献
Oil/water emulsion separation in harsh environments remains a big challenge. Herein, a double layered nanofibrous composite membrane was developed by assembly of polydopamine‐modified hexagonal boron nitride (h‐BN‐PDA) onto a poly(arylene ether nitrile) (PEN) nanofibrous mat. Owing to the synergistic effect of a h‐BN‐PDA skin layer and a PEN nanofibrous mat supporting layer, as‐prepared composite membrane exhibited high thermal stability, corrosion resistance, and superhydrophilic/underwater superoleophobic property. Consequently, the PEN composite membrane showed good antifouling performance and a high rejection ratio (>99.0%) for various oil/water emulsions. After 10 cycles, the separation flux of PEN composite membrane still reached 588.1 L/m2 h under the operating pressure of 0.04 MPa. Furthermore, the PEN composite membrane could still achieve high separation efficiency and high flux in high‐temperature (65 °C) and strongly corrosive conditions (pH = 1‐13). Therefore, the stable and efficient h‐BN‐PDA/PEN composite membrane showed potential application for treating oily wastewater in harsh environments. 相似文献
High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering. 相似文献
Photoreactive and thermoresponsive N‐isopropylacrylamide (NIPAM)–surfmer copolymer hydrogels containing 4,4′‐di(6‐sulfato‐hexyloxy)azobenzene (DSHA) dianions are described. The functional hydrogels are obtained in a two steps. First a micellar aqueous solution of (11‐(acryloyloxy)undecyl)trimethylammonium bromide (AUTMAB) and NIPAM is exposed to 60Co‐gamma irradiation, and a thermoresponsive copolymer gel is obtained. Second, DSHA is included by shrinking the gel at 50 °C and subsequent reswelling in an aqueous solution of DSHA disodium salt at 20 °C. Reswelling is accompanied by electrostatic adsorption of DSHA dianions at the positively charged AUTMAB headgroups replacing the bromide ions. Gels containing trans‐DSHA are transparent yellow at room temperature (λmax = 370 nm), while gels containing cis‐rich DSHA are orange (λmax = 460 and 330 nm). Energy dispersive X‐ray measurements indicate that 41% of the bromide ions are exchanged if trans‐DSHA is used for adsorption, and only 7.5% if cis‐DSHA is used. The incorporation of DSHA lowers the lower critical solution temperature (LCST) from 34 to 32 °C. Below the LCST, DSHA can be switched from the trans‐ to the cis‐rich state and vice versa upon irradiation with UV (λ = 366 nm) or visible light (λ ≥ 450 nm). Above the LCST no photoreaction takes place. 相似文献
A surfactant, R‐6‐AO, derived from dehydroabietic acid has been synthesized. It behaves as a highly efficient low‐molecular‐weight hydrogelator with an extremely low critical gelation concentration (CGC) of 0.18 wt % (4 mm ). R‐6‐AO not only stabilizes oil‐in‐water (O/W) emulsions at concentrations above its critical micelle concentration (cmc) of 0.6 mm , but also forms gel emulsions at concentrations beyond the CGC with the oil volume fraction freely adjustable between 2 % and 95 %. Cryo‐TEM images reveal that R‐6‐AO molecules self‐assemble into left‐handed helical fibers with cross‐sectional diameters of about 10 nm in pure water, which can be turned to very stable hydrogels at concentrations above the CGC. The gel emulsions stabilized by R‐6‐AO can be prepared with different oils (n‐dodecane, n‐decane, n‐octane, soybean oil, olive oil, tricaprylin) owing to the tricyclic diterpene hydrophobic structure in their molecules that enables them to adopt a unique arrangement in the fibers. 相似文献
The thermoresponsive behavior of an elastin‐based polymer can be altered by the polymeric macromolecular conformation. Thus, when the elastin basic amino acid sequence VPGVG is used as a pendant group of a poly(phenylacetylene) (PPA) its thermoresponsive behavior in water can be remotely detected through conformational changes on the formed helix. Circular dichroism at different temperatures shows an inversion of the first Cotton effect (450 nm) at 25.8 °C that matches with the cloud point temperature. The elastin‐based side‐chain poly(phenylacetylene) shows an upper critical solution temperature with low pH and concentration dependency, not expected in elastin‐based polymers. It was found that the polymer self‐assembles in water into spherical nanoparticles with hydrodynamic diameters of 140 nm at the hydrophobic state. 相似文献
Thermoresponsive water‐soluble polymers are of great importance since they typically show a lower critical solution temperature (LCST) in aqueous media. In this research, the LCST change in broad temperature ranges of copolymers composed of natural glycyrrhetinic acid (GA)‐based methacrylate and N ,N′ ‐dimethylacrylamides (DMAs) was investigated as a function of the concentration and the content of GA pendants. By complexation of GA pendants with β‐cyclodextrin (β‐CD), a side‐chain polypseudorotaxane was obtained, which exhibited a significant increase in the LCST of copolymers. Moreover, the precisely reversible control of the LCST behavior was realized through adding a competing guest molecule, sodium 1‐admantylcarboxylate. This work illustrates a simple and effective approach to endow water‐soluble polymers with broad temperature tunability and helps us further understand the effect of a biocompatible host–guest complementary β‐CD/GA pair on the thermoresponsive process. 相似文献
A series of pyrrolidone‐based polymers is prepared from pyroglutamic acid, a bio‐derived resource. Polymers bearing simple alkoxy substituents (e.g., methoxy, ethoxy, and butoxy) are soluble in common organic solvents and possess glass transition temperatures that are dependent on the length of the alkoxy residue. Replacing these substituents with an ether moiety (CH3OCH2CH2O—) affords a highly sensitive and reversible thermoresponsive polymer with a lower critical solution temperature (LCST) of 42 °C in water. Copolymers composed of repeat units bearing both the ether and simple alkoxy residues are found to exhibit LCSTs that are highly dependent on the nature of the hydrophobic alkoxy residue suggesting that the LCSTs of these polymers can be successfully tuned by simply tailoring the copolymer structure. 相似文献