RGB Small Molecules Based on a Bipolar Molecular Design for Highly Efficient Solution‐Processed Single‐layer OLEDs

In this paper, we describe a bipolar molecular design for small molecule solution‐processed organic light emitting diodes (OLEDs). Combining the rigidity of the conjugated emissive cores and the flexibility of the peripheral alkyl‐linked carbazole groups, two series of highly efficient bipolar RGB (red, green, blue) emitters have been synthesized and characterized. The emissive cores are composed of electron‐withdrawing groups; the carbazole groups endow the materials electron‐donating units. Such bipolar structures are advantageous for the carrier injection and balance. Four peripheral carbazole groups are introduced in T‐series materials (TCDqC, TCSoC, TCBzC, TCNzC), and another four in O‐series materials (OCDqC, OCSoC, OCBzC, OCNzC). With the single‐layer device configuration of ITO/PEDOT:PSS/emitting layer/CsF/Al, two green devices exhibited excellent performance with a maximum luminescence efficiency of over 6.4 cd A^?1, and a high maximum luminance of more than 6700 cd m^?2. In addition, compared with the T‐series, the luminescence efficiency of blue and red devices based on O‐series materials increased from 1.6 to 2.8 cd A^?1 and 0.2 to 1.3 cd A^?1, respectively. To our knowledge, the performance of the blue device based on OCSoC is among the best of the blue small‐molecule solution‐processed single‐layer devices reported so far.     

High‐Performance CsPb1−xSnxBr3 Perovskite Quantum Dots for Light‐Emitting Diodes

All inorganic CsPbBr₃ perovskite quantum dots (QDs) are potential emitters for electroluminescent displays. We have developed a facile hot‐injection method to partially replace the toxic Pb²⁺ with highly stable Sn⁴⁺. Meanwhile, the absolute photoluminescence quantum yield of CsPb_1−x Sn_x Br₃ increased from 45 % to 83 % with Sn^IV substitution. The transient absorption (TA) exciton dynamics in undoped CsPbBr₃ and CsPb_0.67Sn_0.33Br₃ QDs at various excitation fluences were determined by femtosecond transient absorption, time‐resolved photoluminescence, and single‐dot spectroscopy, providing clear evidence for the suppression of trion generation by Sn doping. These highly luminescent CsPb_0.67Sn_0.33Br₃ QDs emit at 517 nm. A device based on these QDs exhibited a luminance of 12 500 cd m⁻², a current efficiency of 11.63 cd A⁻¹, an external quantum efficiency of 4.13 %, a power efficiency of 6.76 lm w⁻¹, and a low turn‐on voltage of 3.6 V, which are the best values among reported tin‐based perovskite quantum‐dot LEDs.     

High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light‐emitting diodes (LEDs). State‐of‐the‐art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge‐transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all‐inorganic CsPbBr₃ perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m^?2, are achieved. Moreover, the device shows decent stability even under a brightness of 10⁴ cd m^?2. We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.     

Thermally stable red electroluminescent hybrid polymers derived from functionalized silsesquioxane and 4,7‐bis(3‐ethylhexyl‐2‐thienyl)‐2,1,3‐benzothiadiazole

Hyperbranched organic–inorganic hybrid conjugated polymers P1 and P2 were prepared via FeCl₃‐oxiditive polymerization of 4,7‐bis(3‐ethylhexyl‐2‐thienyl)‐2,1,3‐benzothiadiazole ( A ) and octa(3‐ethylhexyl‐2‐thienyl‐phenyl)polyhedral oligomeric silsesquioxane (POSS) ( B ) at different POSS concentrations. Compared to linear polymer PM derived from A , P1 , and P2 exhibit much higher PL quantum efficiency (?_PL‐f) in condensed state with improved thermal stability. ?_PL‐f of P1 and P2 increased by 80% and 400%, and the thermal degradation temperatures of P1 and P2 are increased by 35 °C and 46 °C, respectively. Light‐emitting diodes were fabricated using P1 , P2 , and PM . While the electroluminescent spectra of both P1 and PM show λ_max at 660 nm, P1 exhibits a much narrower EL spectrum and higher electroluminescence (～500%) compared with PM at a same voltage and film thickness. The maximum current efficiency of P1 is more than seven times of that of PM . The turn‐on voltages of the LEDs are in the order of P2 > PM > P1 . LED prepared by blending P1 with MEH‐PPV shows a maximum luminescence of 2.6 × 10³ cd/m² and a current efficiency of 1.40 cd/A, which are more than twice (1.1 × 10³ cd/m²) and five times (0.27 cd/A) of LED of PM /MEH‐PPV blend, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5661–5670, 2009     

Water-Driven Synthesis of Deep-Blue Perovskite Colloidal Quantum Wells for Electroluminescent Devices

Perovskite colloidal quantum wells (QWs) are promising to realize narrow deep-blue emission, but the poor optical performance and stability suppress their practical application. Here, we creatively propose a water-driven synthesis strategy to obtain size-homogenized and strongly confined deep-blue CsPbBr₃ QWs, corresponding to three monolayers, which emit at the deep-blue wavelength of 456 nm. The water controls the orientation and distribution of the ligands on the surface of the nanocrystals, thus inducing orientated growth through the Ostwald ripening process by phagocytizing unstable nanocrystals to form well-crystallized QWs. These QWs present remarkable stability and high photoluminescence quantum yield of 94 %. Furthermore, we have prepared light-emitting diodes based on the QWs via the all-solution fabrication strategy, achieving an external quantum efficiency of 1 % and luminance of 2946 cd m⁻², demonstrating state-of-the-art brightness for perovskite QW-based LEDs.     

A Novel Spiro[acridine‐9,9′‐fluorene] Derivatives Containing Phenanthroimidazole Moiety for Deep‐Blue OLED Application

Typical π–π stacking and aggregation‐caused quenching could be suppressed in the film‐state by the spiro conformation molecular design in the field of organic light‐emitting diodes (OLEDs). Herein, a novel deep‐blue fluorescent material with spiro conformation, 1‐(4‐(tert ‐butyl)phenyl)‐2‐(4‐(10‐phenyl‐10H ‐spiro[acridine‐9,9′‐fluoren]‐2‐yl)phenyl)‐1H ‐phenanthro[9,10‐d ]imidazole ( SAF‐BPI ), was designed and synthesized. The compound consists of spiro‐acridine‐fluorene (SAF) as donor part and phenanthroimidazole (BPI) as acceptor part. Owing to the rigid SAF skeleton, this compound exhibits a high thermal stability with a glass transition temperature (T _g) of 198 °C. The compound exhibits bipolar transporting characteristics demonstrated by the single‐carrier devices. The non‐doped OLEDs based on the SAF‐BPI as the emitting layer shows maximum emission at 448 nm, maximum luminance of 2122 cd m⁻², maximum current efficiency (CE) of 3.97 cd A⁻¹, and a maximum power efficiency of 2.08 lm W⁻¹. The chromaticity coordinate is stable at (0.15, 0.10) at the voltage of 7–11 V. The device shows a slow efficiency roll‐off with CE of 3.35 and 2.85 cd A⁻¹ at 100 and 1000 cd m⁻², respectively.     

High-Performance Perovskite Light-Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light-emitting diodes (LEDs). State-of-the-art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge-transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all-inorganic CsPbBr₃ perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m⁻², are achieved. Moreover, the device shows decent stability even under a brightness of 10⁴ cd m⁻². We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.     

Characterizing mixed phosphonic acid ligand capping on CdSe/ZnS quantum dots using ligand exchange and NMR spectroscopy

The ligand capping of phosphonic acid functionalized CdSe/ZnS core–shell quantum dots (QDs) was investigated with a combination of solution and solid‐state ³¹P nuclear magnetic resonance (NMR) spectroscopy. Two phosphonic acid ligands were used in the synthesis of the QDs, tetradecylphosphonic acid and ethylphosphonic acid. Both alkyl phosphonic acids showed broad liquid and solid‐state ³¹P NMR resonances for the bound ligands, indicative of heterogeneous binding to the QD surface. In order to quantify the two ligand populations on the surface, ligand exchange facilitated by phenylphosphonic acid resulted in the displacement of the ethylphosphonic acid and tetradecylphosphonic acid and allowed for quantification of the free ligands using ³¹P liquid‐state NMR. After washing away the free ligand, two broad resonances were observed in the liquids' ³¹P NMR corresponding to the alkyl and aromatic phosphonic acids. The washed samples were analyzed via solid‐state ³¹P NMR, which confirmed the ligand populations on the surface following the ligand exchange process. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly Efficient Nondoped OLEDs with Negligible Efficiency Roll‐Off Fabricated from Aggregation‐Induced Delayed Fluorescence Luminogens

Purely organic emitters that can efficiently utilize triplet excitons are highly desired to cut the cost of organic light‐emitting diodes (OLEDs), but most of them require complicated doping techniques for their fabrication and suffer from severe efficiency roll‐off. Herein, we developed novel luminogens with weak emission and negligible delayed fluorescence in solution but strong emission with prominent delayed components upon aggregate formation, giving rise to aggregation‐induced delayed fluorescence (AIDF). The concentration‐caused emission quenching and exciton annihilation are well‐suppressed, which leads to high emission efficiencies and efficient exciton utilization in neat films. Their nondoped OLEDs provide excellent electroluminescence efficiencies of 59.1 cd A⁻¹, 65.7 lm W⁻¹, and 18.4 %, and a negligible current efficiency roll‐off of 1.2 % at 1000 cd m⁻². Exploring AIDF luminogens for the construction of nondoped OLEDs could be a promising strategy to advance device efficiency and stability.     

Quantifying the Thermodynamics of Ligand Binding to CsPbBr3 Quantum Dots

Cesium lead halide perovskites are an emerging class of quantum dots (QDs) that have shown promise in a variety of applications; however, their properties are highly dependent on their surface chemistry. To this point, the thermodynamics of ligand binding remain unstudied. Herein, ¹H NMR methods were used to quantify the thermodynamics of ligand exchange on CsPbBr₃ QDs. Both oleic acid and oleylamine native ligands dynamically interact with the CsPbBr₃ QD surface, having individual surface densities of 1.2–1.7 nm^?2. 10‐Undecenoic acid undergoes an exergonic exchange equilibrium with bound oleate (K_eq=1.97) at 25 °C while 10‐undecenylphosphonic acid undergoes irreversible ligand exchange. Undec‐10‐en‐1‐amine exergonically exchanges with oleylamine (K_eq=2.52) at 25 °C. Exchange occurs with carboxylic acids, phosphonic acids, and amines on CsPbBr₃ QDs without etching of the nanocrystal surface; increases in the steady‐state PL intensities correlate with more strongly bound conjugate base ligands.     

Triphenylamine-Derived Solid-State Emissive Carbon Dots for Multicolor High-Efficiency Electroluminescent Light-Emitting Diodes

Two kinds of triphenylamine-derived solid-state emissive carbon dots (CDs) with orange and yellow color are facilely synthesized through solvothermal treatment, taking advantage of the nonplanar structure and good carrier mobility of triphenylamine unit. Theoretical calculations show that the triphenylamine structure could greatly inhibit the direct π–π stacking of aromatic skeletons and enhance the fluorescence properties of CDs in aggregation state. By adopting the CDs as single emissive layer, high-performance orange-color and green-color electroluminescent light-emitting diodes (LEDs) are successfully fabricated, with maximum brightness of 9450/4236 cd m⁻², high current efficiency of 1.57/2.34 cd A⁻¹ and low turn-on voltage of 3.1/3.6 eV are respectively achieved. Significantly, white-color LED device is further prepared. This work provides a universal platform for the construction of novel solid-state emissive CDs with significant applications in photoelectric device.     

Bipolar Heteroleptic Green Iridium Dendrimers Containing Oligocarbazole and Oxadiazole Dendrons for Bright and Efficient Nondoped Electrophosphorescent Devices

Bipolar heteroleptic green light‐emitting iridium (Ir) dendrimers G(OXD) and G(DOXD) have been designed and synthesized under mild conditions in high yields, in which the first C^N and second O^O ligands are functionalized with oligocarbazole‐ and oxadiazole‐based dendrons, respectively. To avoid affecting the optical properties of the emissive iridium core, all the functional moieties are attached to the ligands through a flexible spacer. Compared with the unipolar dendrimer G(acac ), dendrimers G(OXD) and G(DOXD) exhibit the close emission maxima of 511–512 nm and photoluminescence quantum yield of 0.39–0.40 in a solution of toluene. Moreover, on going from G(acac) to G(OXD) and G(DOXD) , we have found that the introduction of oxadiazole fragments decreases the lowest unoccupied molecular orbital (LUMO) energy levels to facilitate the electron injection and electron transporting, while their highest occupied molecular orbital (HOMO) energy levels remain unchanged. This means that, we can individually tune the HOMO and LUMO energy levels based on the heteroleptic structure to ensure the relative independence between the hole and electron in the emitting layer (EML), which is a favorable feature for bipolar optoelectronic materials. As a result, a bilayer nondoped electrophosphorescent device with G(DOXD) as the EML gives a maximum luminous efficiency of 25.5 cd A⁻¹ (η_ext: 7.4 %) and a brightness of 33 880 cd m⁻². In comparison to G(acac) (17.2 cd A⁻¹, 17 680 cd m⁻²), both the efficiency and brightness are improved by about 1.5 and 2 times, respectively. These state‐of‐the‐art performances indicate the potential of these bipolar heteroleptic iridium dendrimers as solution‐processible emitting materials for nondoped device applications.     

Enhancing the device performance of a blue light‐emitting copolymer using CdSe/ZnS quantum dots

An alternating triarylamine‐functionalized fluorene‐based copolymer synthesized using a Suzuki–Miyaura cross‐coupling procedure is used as blue emitting layer in polymer light‐emitting diodes (PLEDs). Subsequently, the effects of CdSe/ZnS quantum dots (QDs) on the optoelectronic properties of the copolymer are investigated. Therefore, CdSe/ZnS QDs are embedded into the copolymer matrix and hybrid PLEDs are fabricated. The devices comprised of CdSe/ZnS QDs reveal enhanced performances, yielding about 3.4 times more luminous efficiency than that of the device without QDs. Further enhancement is achieved by using electron transport layer; the luminous efficiency rose from 0.065 to 1.740 cd A^?1 for the hybrid PLEDs, corresponding to a superb 27‐fold intensification of the efficiency. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 147–156     

Highly Air‐Stable Electron‐Transport Material for Ink‐Jet‐Printed OLEDs

A novel cross‐linkable electron‐transport material has been designed and synthesized for use in the fabrication of solution‐processed OLEDs. The material exhibits a low LUMO level of ?3.51 eV, a high electron mobility of 1.5×10^?5 cm² V^?1 s^?1, and excellent stability. An average 9.3 % shrinkage in film thickness was observed for the film after thermal curing. A maximum external quantum efficiency (EQE) of 15.6 % (35.0 cd A^?1) was achieved for blue‐phosphorescent OLEDs by spin‐coating and 13.8 % (31.0 cd A^?1) for an ink‐jet‐printed device, both of which are better than the EQE of a control device prepared by vacuum‐deposition (see figure).     

2D sp2 Carbon‐Conjugated Porphyrin Covalent Organic Framework for Cooperative Photocatalysis with TEMPO

2D covalent organic frameworks (COFs) are receiving ongoing attention in semiconductor photocatalysis. Herein, we present a photocatalytic selective chemical transformation by combining sp² carbon‐conjugated porphyrin‐based covalent organic framework (Por‐sp²c‐COF) photocatalysis with TEMPO catalysis illuminated by 623 nm red light‐emitting diodes (LEDs). Highly selective conversion of amines into imines was swiftly afforded in minutes. Specifically, the π‐conjugation of porphyrin linker leads to extensive absorption of red light; the sp² ?C=C? double bonds linkage ensures the stability of Por‐sp²c‐COF under high concentrations of amine. Most importantly, we found that crystalline framework of Por‐sp²c‐COF is pivotal for cooperative photocatalysis with (2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl (TEMPO). This work foreshadows that the outstanding hallmarks of COFs, particularly crystallinity, could be exploited to address energy and environmental challenges by cooperative photocatalysis.     

Intercrossed Carbon Nanorings with Pure Surface States as Low‐Cost and Environment‐Friendly Phosphors for White‐Light‐Emitting Diodes

As an important energy‐saving technique, white‐light‐emitting diodes (W‐LEDs) have been seeking for low‐cost and environment‐friendly substitutes for rare‐earth‐based expensive phosphors or Pd²⁺/Cd²⁺‐based toxic quantum dots (QDs). In this work, precursors and chemical processes were elaborately designed to synthesize intercrossed carbon nanorings (IC‐CNRs) with relatively pure hydroxy surface states for the first time, which enable them to overcome the aggregation‐induced quenching (AIQ) effect, and to emit stable yellow‐orange luminescence in both colloidal and solid states. As a direct benefit of such scarce solid luminescence from carbon nanomaterials, W‐LEDs with color coordinate at (0.28, 0.27), which is close to pure white light (0.33, 0.33), were achieved through using these low‐temperature‐synthesized and toxic ion‐free IC‐CNRs as solid phosphors on blue LED chips. This work demonstrates that the design of surface states plays a crucial role in exploring new functions of fluorescent carbon nanomaterials.     

Glycine-Functionalized CsPbBr3 Nanocrystals for Efficient Visible-Light Photocatalysis of CO2 Reduction

Capping ligands are indispensable for the preparation of metal-halide-perovskite (MHP) nanocrystals (NCs) with good stability; however, the long alkyl-chain capping ligands in conventional MHP NCs will be unfavorable for CO₂ adsorption and hinder the efficient carrier separation on the surface of MHP NCs, leading to inferior catalytic activity in artificial photosynthesis. Herein, CsPbBr₃ nanocrystals with short-chain glycine as ligand are constructed through a facile ligand-exchange strategy. Owing to the reduced hindrance of glycine and the presence of the amine group in glycine, the photogenerated carrier separation and CO₂ uptake capacity are noticeably improved without compromising the stability of the MHP NCs. The CsPbBr₃ nanocrystals with glycine ligands exhibit a significantly increased yield of 27.7 μmol g⁻¹ h⁻¹ for photocatalytic CO₂-to-CO conversion without any organic sacrificial reagents, which is over five times higher than that of control CsPbBr₃ NCs with conventional long alkyl-chain capping ligands.     

Non‐Doped Sky‐Blue OLEDs Based on Simple Structured AIE Emitters with High Efficiencies at Low Driven Voltages

Blue organic light‐emitting diodes (OLEDs) are necessary for flat‐panel display technologies and lighting applications. To make more energy‐saving, low‐cost and long‐lasting OLEDs, efficient materials as well as simple structured devices are in high demand. However, a very limited number of blue OLEDs achieving high stability and color purity have been reported. Herein, three new sky‐blue emitters, 1,4,5‐triphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEI), 1‐(4‐methoxyphenyl)‐4,5‐diphenyl‐2‐(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (TPEMeOPhI) and 1‐phenyl‐2,4,5‐tris(4‐(1,2,2‐triphenylvinyl)phenyl)‐1H‐imidazole (3TPEI), with a combination of imidazole and tetraphenylethene groups, have been developed. High photoluminescence quantum yields are obtained for these materials. All derivatives have demonstrated aggregation‐induced emission (AIE) behavior, excellent thermal stability with high decomposition and glass transition temperatures. Non‐doped sky‐blue OLEDs with simple structure have been fabricated employing these materials as emitters and realized high efficiencies of 2.41 % (4.92 cd A⁻¹, 2.70 lm W⁻¹), 2.16 (4.33 cd A⁻¹, 2.59 lm W⁻¹) and 3.13 % (6.97 cd A⁻¹, 4.74 lm W⁻¹) for TPEI, TPEMeOPhI and 3TPEI, with small efficiency roll‐off. These are among excellent results for molecules constructed from the combination of imidazole and TPE reported so far. The high performance of a 3TPEI‐based device shows the promising potential of the combination of imidazole and AIEgen for synthesizing efficient electroluminescent materials for OLED devices.     

Polymer Light-emitting Diodes Based on End-capped Poly[9,9-di-(2'-ethylhexyl)fluorenyl-2,7-diyl]

We demonstrate polymer light‐emitting diodes (LEDs) based on poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] with end capper dimethylphenyl or N,N‐bis(4‐methylphenyl)‐N‐phenylamine. The introduction of end‐capper groups increased the device luminance and efficiency, while greatly depressing the green emission. For the devices constructed of poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] end capped with dimethylphenyl, the maximum luminance reached 381 cd/m² at 122 mA/cm². The maximum external quantum efficiency was 0.16% at 117 mA/cm², which is more than five times higher than that of the non‐end‐capped polymer LEDs. The electroluminescence (EL) maximum was at 485 nm, blue shifted by 52 nm with respect to that of the non‐end‐capped polyfluorene devices. It is proposed that efficient hole trapping at end capper and increased resistance of polyfluorene to oxidation are responsible for the improved device performance and color stability.     

Versatile p‐Type Chemical Doping to Achieve Ideal Flexible Graphene Electrodes

We report effective solution‐processed chemical p‐type doping of graphene using trifluoromethanesulfonic acid (CF₃SO₃H, TFMS), that can provide essential requirements to approach an ideal flexible graphene anode for practical applications: i) high optical transmittance, ii) low sheet resistance (70 % decrease), iii) high work function (0.83 eV increase), iv) smooth surface, and iv) air‐stability at the same time. The TFMS‐doped graphene formed nearly ohmic contact with a conventional organic hole transporting layer, and a green phosphorescent organic light‐emitting diode with the TFMS‐doped graphene anode showed lower operating voltage, and higher device efficiencies (104.1 cd A^?1, 80.7 lm W^?1) than those with conventional ITO (84.8 cd A^?1, 73.8 lm W^?1).