Silver‐Free Activation of Ligated Gold(I) Chlorides: The Use of [Me3NB12Cl11]− as a Weakly Coordinating Anion in Homogeneous Gold Catalysis

Phosphane and N‐heterocyclic carbene ligated gold(I) chlorides can be effectively activated by Na[Me₃NB₁₂Cl₁₁] ( 1 ) under silver‐free conditions. This activation method with a weakly coordinating closo‐dodecaborate anion was shown to be suitable for a large variety of reactions known to be catalyzed by homogeneous gold species, ranging from carbocyclizations to heterocyclizations. Additionally, the capability of 1 in a previously unknown conversion of 5‐silyloxy‐1,6‐allenynes was demonstrated.     

Synthesis of Ethyl Methyl Carbonate by Homogeneous Catalysis 均相催化合成碳酸甲乙酯

 利用碳酸二甲酯和碳酸二乙酯进行酯交换反应制备了碳酸甲乙酯,并考察了Ti(OBu)4,Ti(OPh)4,Bu2SnO和BuSnCl3在这一反应中的催化性能. 结果表明,这些催化剂对该反应都有较好的催化性能. 其中,Bu2SnO的催化性能最好,在103 ℃下反应3 h时,碳酸甲乙酯的收率可达45.6%. 提出了Bu2SnO催化剂对碳酸二甲酯与碳酯二乙酯酯交换反应的可能机理.     

Dynamics and counterion-dependence of the structures of weakly bound Ag+-P4S3 complexes

In an earlier publication (J. Am. Chem. Soc. 2002 , 124, 7111) we showed that polymeric cationic [Ag(P₄S₃)_n]⁺ complexes (n=1, 2) are accessible if partnered with a suitable weakly coordinating counterion of the type [Al(OR^F)₄]^? (OR^F: poly‐ or perfluorinated alkoxide). The present work addresses the following questions that could not be answered in the initial report: How many P₄S₃ cages can be bound to a Ag⁺ ion? Why are these complexes completely dynamic in solution in the ³¹P NMR experiments? Can these dynamics be frozen out in a low‐temperature ³¹P MAS NMR experiment? What are the principal binding sites of the P₄S₃ cage towards the Ag⁺ ion? What are likely other isomers on the [Ag(P₄S₃)_n]⁺ potential energy surface? Counterion influence: Reactions of P₄S₃ with Ag[Al{OC(CH₃)(CF₃)₂}₄] (Ag[hftb]) and Ag[{(CF₃)₃CO}₃Al‐F‐Al{OC(CF₃)₃)}₃] (Ag[al‐f‐al]) gave [(P₄S₃)Ag[hftb]]_∞ ( 7 ) as a molecular species, whereas [Ag₂(P₄S₃)₆]²⁺[al‐f‐al]^?₂ ( 8 ) is an isolated 2:1 salt. We suggest that a maximum of three P₄S₃ cages may be bound on average to an Ag⁺ ion. Only isolated dimeric dications are formed with the largest cation, but polymeric species are obtained with all other smaller aluminates. Thermodynamic Born–Haber cycles, DFT calculations, as well as solution NMR and ESI mass spectrometry indicate that 8 exhibits an equilibrium between the dication [Ag₂(P₄S₃)₆]²⁺ (in the solid state) and two [Ag(P₄S₃)₃]⁺ monocations (in the gas phase and in solution). Dynamics: ³¹P MAS NMR spectroscopy showed these solid adducts to be highly dynamic, to an extent that the ²J_P,P coupling within the cages could be resolved (J‐res experiment). This is supported by DFT calculations, which show that the extended PES of [Ag(P₄S₃)_n]⁺ (n=1–3) and [Ag₂(P₄S₃)₂]⁺ is very flat. The structures of α‐ and γ‐P₄S₃ were redetermined. Their variable‐temperature ³¹P MAS NMR spectra are discussed jointly with those of all four currently known [Ag(P₄S₃)_n]⁺ adducts with n=1, 2, and 3.     

Synthesis and application of molybdenum (III) complexes bearing weakly coordinating anions as catalysts of isobutylene polymerization

Acetonitrile ligated molybdenum (III) complexes of the structure [MoCl(NCCH₃)₅]²⁺ bearing different weakly coordinating anions [B(C₆F₅)₄]^? (WCA a), [B{C₆H₃(m‐CF₃)₂}₄]^? (WCA b) and [(C₆F₅)₃B‐C₃H₃N₂‐B(C₆F₅)₃]^? (WCA c) were applied as homogeneous catalysts of the polymerization of isobutylene. High monomer conversions were obtained in short reaction times (<30 min). The molecular weight of the resulting polyisobutylene is nearly independent of parameters such as temperature, solvent, monomer concentration, but is strongly influenced by the type of WCA and by chain transfer reactions which were observed in these systems. Highly reactive low molecular weight polyisobutylenes (M_n < 2000 g/mol) were obtained with a high content of exo double bond end groups as shown by ¹H NMR analysis. Furthermore, experiments were performed to reduce the isomerization of these exo end groups into other internal double bonds by varying the polymerization parameters. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3775–3786, 2010     

Towards the Discrimination of Carboxylates by Hydrogen‐Bond Donor Anion Receptors

The binding constants (log K_ass) of small synthetic receptor molecules based on indolocarbazole, carbazole, indole, urea and some others, as well as their combinations were measured for small carboxylate anions of different basicity, hydrophilicity and steric demands, that is, trimethylacetate, acetate, benzoate and lactate, in 0.5 % H₂O/[D₆]DMSO by using the relative NMR‐based measurement method. As a result, four separate binding affinity scales (ladders) including thirty‐eight receptors were obtained with the scales anchored to indolocarbazole. The results indicate that the binding strength is largely, but not fully, determined by the strength of the primary hydrogen‐bonding interaction. The latter in turn is largely determined by the basicity of the anion. The higher is the basicity of the anion the stronger in general is the binding, leading to the approximate order of increasing binding strength, lactate<benzoate<acetate≤trimethylacetate, which holds with all investigated receptors. Nevertheless, there are a number of occasions when the binding order changes with changing of the carboxylate anion, sometimes quite substantially. Principal component analysis (PCA) reveals that this is primarily connected to preferential binding of trimethylacetate, supposedly caused by an additional hydrophobic/solvophobic interaction. These findings enable making better predictions, which receptor framework or cavity is best suited for carboxylate anions in receptor design.     

Hyperpolarization of Nitrogen‐15 Schiff Bases by Reversible Exchange Catalysis with para‐Hydrogen

NMR with thermal polarization requires relatively concentrated samples, particularly for nuclei with low abundance and low gyromagnetic ratios, such as ¹⁵N. We expand the substrate scope of SABRE, a recently introduced hyperpolarization method, to allow access to ¹⁵N‐enriched Schiff bases. These substrates show fractional ¹⁵N polarization levels of up to 2 % while having only minimal ¹H enhancements.     

Synthesis of a Perfluorinated Phenoxyphosphorane and Conversion to Its Hexacoordinate Anions

We report the synthesis and structural characterization of a neutral P^V Lewis acid, P(OC₆F₅)₅, and salts containing the six-coordinate anions [P(OC₆F₅)₅F]⁻ and [P(OC₆F₅)₆]⁻. The latter anion exhibits a rare example of F–π_arene interactions in both the solid and the solution phase, which has been quantitatively studied by variable-temperature (VT) NMR spectroscopy. The Lewis acid strength of P(OC₆F₅)₅ has been assessed through experimental fluoride ion competition experiments and quantum-chemical calculations of its fluoride ion affinity (FIA) and global electrophilicity index (GEI). Our findings highlight the importance of considering solvent effects in electrophilicity calculations, even when neutral Lewis acids are involved, and show a rare divergence between FIA and GEI trends. The coordinating abilities of the [P(OC₆F₅)₆]⁻ and [P(OC₆F₅)₅F]⁻ anions towards the trityl cation, as a prototypical electrophile, have been assessed.     

锰氧八面体分子筛室温同时去除甲醛和臭氧的性能研究

通过回流法、无溶剂法及水热法合成了3种锰氧八面体分子筛催化剂（OMS-2）,并对其室温同时去除甲醛和臭氧的反应活性进行了研究.结果表明无溶剂法制备的锰氧八面体分子筛（OMS-2-S）具有最高的甲醛转化率,且水气的加入对3种OMS-2催化剂的二氧化碳产率均具有明显的促进作用.并通过XRD、SEM和XPS等技术对催化剂进行表征,考察了催化剂物理化学性质对其催化活性的影响.从表征结果可得,较强的吸附能力、丰富的氧空位及较强的氧物种移动性是OMS-2-S催化剂活性较高的原因.     

完全液相法Cu-Zn-Si-Al催化剂一步合成二甲醚

采用完全液相法,以廉价的硅溶胶作为硅原料,制备了一系列的Cu-Zn-Si-Al双功能浆状催化剂,考察不同硅铝比对浆态床CO加氢合成二甲醚的影响。 两周的活性评价表明,硅的引入显著提高了催化剂的活性和稳定性。 当n(Si)/n(Al)=2时,CO转化率最高,为58.1%,且二甲醚的选择性为80.2%。 通过FTIR、XRD、TPR、TPD、BET、XPS和TEM等技术手段对催化剂进行了表征,结果表明,硅组分的添加可以促进活性组分Cu物种的分散,并能够改善完全液相法热处理而导致的积碳现象。 且Si组分的引入与催化剂中的Al相互作用,显著提高了催化剂的甲醇脱水性能,从而使催化剂具有较高的二甲醚选择性。     

Li[B(OCH2CF3)4]: Synthesis,Characterization and Electrochemical Application as a Conducting Salt for LiSB Batteries

A new Li salt with views to success in electrolytes is synthesized in excellent yields from lithium borohydride with excess 2,2,2‐trifluorethanol (HOTfe) in toluene and at least two equivalents of 1,2‐dimethoxyethane (DME). The salt Li[B(OTfe)₄] is obtained in multigram scale without impurities, as long as DME is present during the reaction. It is characterized by heteronuclear magnetic resonance and vibrational spectroscopy (IR and Raman), has high thermal stability (T_{decomposition}>271 °C, DSC) and shows long‐term stability in water. The concentration‐dependent electrical conductivity of Li[B(OTfe)₄] is measured in water, acetone, EC/DMC, EC/DMC/DME, ethyl acetate and THF at RT In DME (0.8 mol L ^?1) it is 3.9 mS cm^?1, which is satisfactory for the use in lithium‐sulfur batteries (LiSB). Cyclic voltammetry confirms the electrochemical stability of Li[B(OTfe)₄] in a potential range of 0 to 4.8 V vs. Li/Li⁺. The performance of Li[B(OTfe)₄] as conducting salt in a 0.2 mol L ^?1 solution in 1:1 wt % DME/DOL is investigated in LiSB test cells. After the 40th cycle, 86 % of the capacity remains, with a coulombic efficiency of around 97 % for each cycle. This indicates a considerable performance improvement for LiSB, if compared to the standard Li[NTf₂]/DOL/DME electrolyte system.     

Synthesis and Application of a Perfluorinated Ammoniumyl Radical Cation as a Very Strong Deelectronator

The perfluorinated dihydrophenazine derivative (perfluoro‐5,10‐bis(perfluorophenyl)‐5,10‐dihydrophenazine) (“phenazine^F”) can be easily transformed to a stable and weighable radical cation salt by deelectronation (i.e. oxidation) with Ag[Al(OR^F)₄]/ Br₂ mixtures (R^F=C(CF₃)₃). As an innocent deelectronator it has a strong and fully reversible half‐wave potential versus Fc⁺/Fc in the coordinating solvent MeCN (E°′=1.21 V), but also in almost non‐coordinating oDFB (=1,2‐F₂C₆H₄; E°′=1.29 V). It allows for the deelectronation of [Fe^IIICp*₂]⁺ to [Fe^IV(CO)Cp*₂]²⁺ and [Fe^IV(CN‐^tBu)Cp*₂]²⁺ in common laboratory solvents and is compatible with good σ‐donor ligands, such as L=trispyrazolylmethane, to generate novel [M(L)_x]ⁿ⁺ complex salts from the respective elemental metals.     

氧化锰八面体分子筛纳米棒的合成及其催化甲醛低温氧化性能

 Uniform manganese oxide octahedral molecular sieve (OMS-2) nanorods were synthesized by adding a small quantity of K2S2O8 to the solution containing MnSO4·H2O and KMnO4, and used for complete oxidation of formaldehyde. According to the results of N2 adsorption and X-ray diffraction, the material is a manganese oxide octahedral molecular sieve with the cryptomelane type structure. TEM observation shows that the diameters of the nanorods range from 15 to 25 nm, and the lengths are 300～400 nm. Complete conversion of HCHO to CO2 and H2O can be achieved at 353 K over OMS-2, and the same conversion is obtained at 373 K on the MnOx powder under the same conditions, which demonstrates that the catalytic activity is closely related to the morphology of the catalysts.     

Direct Conversion of Syngas into Methyl Acetate,Ethanol, and Ethylene by Relay Catalysis via the Intermediate Dimethyl Ether

Selective conversion of syngas (CO/H₂) into C₂₊ oxygenates is a highly attractive but challenging target. Herein, we report the direct conversion of syngas into methyl acetate (MA) by relay catalysis. MA can be formed at a lower temperature (ca. 473 K) using Cu‐Zn‐Al oxide/H‐ZSM‐5 and zeolite mordenite (H‐MOR) catalysts separated by quartz wool (denoted as Cu‐Zn‐Al/H‐ZSM‐5|H‐MOR) and also at higher temperatures (603–643 K) without significant deactivation using spinel‐structured ZnAl₂O₄|H‐MOR. The selectivity of MA and acetic acid (AA) reaches 87 % at a CO conversion of 11 % at 643 K. Dimethyl ether (DME) is the key intermediate and the carbonylation of DME results in MA with high selectivity. We found that the relay catalysis using ZnAl₂O₄|H‐MOR|ZnAl₂O₄ gives ethanol as the major product, while ethylene is formed with a layer‐by‐layer ZnAl₂O₄|H‐MOR|ZnAl₂O₄|H‐MOR combination. Close proximity between ZnAl₂O₄ and H‐MOR increases ethylene selectivity to 65 %.     

Monometallic Ni0 and Heterobimetallic Ni0/AuI Complexes of Tripodal Phosphine Ligands: Characterization in Solution and in the Solid State and Catalysis

The tridentate chelate nickel complexes [(CO)Ni{(PPh₂CH₂)₃CMe}] ( 2 ), [(CO)Ni{(PPh₂CH₂CH₂)₃SiMe}] ( 6 ), and [Ph₃PNi{(PPh₂CH₂CH₂)₃SiMe}] ( 7 ), as well as the bidentate complex [(CO)₂Ni{(PPh₂CH₂)₂CMeCH₂PPh₂}] ( 3 ) and the heterobimetallic complex [(CO)₂Ni{(PPh₂CH₂)₂CMeCH₂Ph₂PAuCl}] ( 4 ), have been synthesized and fully characterized in solution. All ¹H and ¹³C NMR signal assignments are based on 2D‐NMR methods. Single crystal X‐ray structures have been obtained for all complexes. Their ³¹P CP/MAS (cross polarization with magic angle spinning) NMR spectra have been recorded and the isotropic lines identified. The signals were assigned with the help of their chemical shift anisotropy (CSA) data. All complexes have been tested regarding their catalytic activity for the cyclotrimerization of phenylacetylene. Whereas complexes 2 – 4 display low catalytic activity, complex 7 leads to quantitative conversion of the substrate within four hours and is highly selective throughout the catalytic reaction.     

One‐Pot Synthesis of Pentasubstituted Cyclohexanes by a Michael Addition Followed by a Tandem Inter–Intra Double Henry Reaction

Michael, Henry, and Henry : A new one‐pot reaction of α,β‐unsaturated aldehydes and β‐dicarbonyls, which involves a Michael reaction catalyzed by diarylprolinol ethers and an inter–intramolecular Henry tandem reaction catalyzed by TBAF (see scheme), has been developed. The reaction proceeds in high enantio‐ and diastereoselectivity for a wide range of unsaturated aldehydes and β‐dicarbonyl reagents.