Superprotonic Conductivity in Flexible Porous Covalent Organic Framework Membranes

Poor mechanical stability of the polymer electrolyte membranes remains one of the bottlenecks towards improving the performance of the proton exchange membrane (PEM) fuel cells. The present work proposes a unique way to utilize crystalline covalent organic frameworks (COFs) as a self‐standing, highly flexible membrane to further boost the mechanical stability of the material without compromising its innate structural characteristics. The as‐synthesized p‐toluene sulfonic acid loaded COF membranes (COFMs) show the highest proton conductivity (as high as 7.8×10⁻² S cm⁻¹) amongst all crystalline porous organic polymeric materials reported to date, and were tested under real PEM operating conditions to ascertain their practical utilization as proton exchange membranes. Attainment of 24 mW cm⁻² power density, which is the highest among COFs and MOFs, highlights the possibility of using a COF membrane over the other state‐of‐the‐art crystalline porous polymeric materials reported to date.     

Hot π‐Electron Tunneling of Metal–Insulator–COF Nanostructures for Efficient Hydrogen Production

A metal–insulator–semiconductor (MIS) photosystem based on covalent organic framework (COF) semiconductors was designed for robust and efficient hydrogen evolution under visible‐light irradiation. A maximal H₂ evolution rate of 8.42 mmol h^?1 g^?1 and a turnover frequency of 789.5 h^?1 were achieved by using a MIS photosystem prepared by electrostatic self‐assembly of polyvinylpyrrolidone (PVP) insulator‐capped Pt nanoparticles (NPs) with the hydrophilic imine‐linked TP‐COFs having =C=O?H?N= hydrogen‐bonding groups. The hot π‐electrons in the photoexcited n‐type TP‐COF semiconductors can be efficiently extracted and tunneled to Pt NPs across an ultrathin PVP insulating layer to reduce protons to H₂. Compared to the Schottky‐type counterparts, the COF‐based MIS photosystems give a 32‐fold‐enhanced carrier efficiency, attributed to the combined enhancement of photoexcitation rate, charge separation, and oxidation rate of holes accumulated in the valence band of the TP‐COF semiconductor.     

Stable 2D Heteroporous Covalent Organic Frameworks for Efficient Ionic Conduction

Two‐dimensional (2D) covalent organic frameworks (COFs) feature open and ordered one‐dimensional column nanochannels which offer immense possibilities for incorporation of various guests for specific functions. However, the relatively low chemical stability of most COFs originating from the dynamic covalent linkages hinders their practical application. In this work, a highly crystalline and heteroporous dibenzo[g,p]chrysene‐based COF (DBC‐2P) was synthesized and served as a host material for ionic conduction. DBC‐2P exhibits excellent stability both in strong acid and base due to the large conjugated DBC‐based knot that reinforces the interlayer interactions. Subsequent encapsulation of linear polyethylene glycol (PEG) and PEG‐LiBF₄ salt into the nanochannels of DBC‐2P affords a hybrid material with a high ionic conductivity of 2.31×10^?3 S cm^?1. This work demonstrates an efficient post‐synthetic strategy for the development of new COF–polymer composites with intriguing properties.     

Modulating Benzothiadiazole‐Based Covalent Organic Frameworks via Halogenation for Enhanced Photocatalytic Water Splitting

Two‐dimensional covalent organic frameworks (2D COFs), an emerging class of crystalline porous polymers, have been recognized as a new platform for efficient solar‐to‐hydrogen energy conversion owing to their pre‐designable structures and tailor‐made functions. Herein, we demonstrate that slight modulation of the chemical structure of a typical photoactive 2D COF (Py‐HTP‐BT‐COF) via chlorination (Py‐ClTP‐BT‐COF) and fluorination (Py‐FTP‐BT‐COF) can lead to dramatically enhanced photocatalytic H₂ evolution rates (HER=177.50 μmol h^?1 with a high apparent quantum efficiency (AQE) of 8.45 % for Py‐ClTP‐BT‐COF). Halogen modulation at the photoactive benzothiadiazole moiety can efficiently suppress charge recombination and significantly reduce the energy barrier associated with the formation of H intermediate species (H*) on polymer surface. Our findings provide new prospects toward design and synthesis of highly active organic photocatalysts toward solar‐to‐chemical energy conversion.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Combined Intrinsic and Extrinsic Proton Conduction in Robust Covalent Organic Frameworks for Hydrogen Fuel Cell Applications

Developing new materials for the fabrication of proton exchange membranes (PEMs) for fuel cells is of great significance. Herein, a series of highly crystalline, porous, and stable new covalent organic frameworks (COFs) have been developed by a stepwise synthesis strategy. The synthesized COFs exhibit high hydrophilicity and excellent stability in strong acid or base (e.g., 12 m NaOH or HCl) and boiling water. These features make them ideal platforms for proton conduction applications. Upon loading with H₃PO₄, the COFs (H₃PO₄@COFs) realize an ultrahigh proton conductivity of 1.13×10^?1 S cm^?1, the highest among all COF materials, and maintain high proton conductivity across a wide relative humidity (40–100 %) and temperature range (20–80 °C). Furthermore, membrane electrode assemblies were fabricated using H₃PO₄@COFs as the solid electrolyte membrane for proton exchange resulting in a maximum power density of 81 mW cm^?2 and a maximum current density of 456 mA cm^?2, which exceeds all previously reported COF materials.     

High‐Flux Membranes Based on the Covalent Organic Framework COF‐LZU1 for Selective Dye Separation by Nanofiltration

Covalent organic frameworks (COFs) are attractive candidates for advanced water‐treatment membranes owing to their high porosity and well‐organized channel structures. Herein, the continuous two‐dimensional imine‐linked COF‐LZU1 membrane with a thickness of only 400 nm was prepared on alumina tubes by in situ solvothermal synthesis. The membrane shows excellent water permeance (ca. 760 L m^?2 h^?1 MPa^?1) and favorable rejection rates exceeding 90 % for water‐soluble dyes larger than 1.2 nm. The water permeance through the COF‐LZU1 membrane is much higher than that of most membranes with similar rejection rates. Long‐time operation demonstrates the outstanding stability of the COF‐LZU1 membrane. As the membrane has no selectivity for hydrated salt ions (selectivity <12 %), it is also suitable for the purification of dye products from saline solutions. The excellent performance and the outstanding water stability render the COF‐LZU1 membrane an interesting system for water purification.     

Hydrogen‐Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton‐Conducting Materials

Two porous hydrogen‐bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra‐high proton conduction values (σ) 0.75× 10^?2 S cm^?1 and 1.8×10^?2 S cm^?1 under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic‐based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen‐bonded porous organic frameworks as solid‐state proton conducting materials.     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Synthesis and characterization of Ni (II) complexes supported by phenoxy/naphthoxy‐imine ligands with pendant N‐ and O‐donor groups and their use in ethylene oligomerization

A series of new Ni(II) complexes of general formula Ni{ZNO} Br ( 2a‐i ) (ZNO = phenoxy/naphthoxy‐imine with pendant N‐ and O‐donor groups) were prepared and characterized by elemental analysis, IR spectroscopy, ESI‐HRMS, and by X‐ray crystallography for 2e . In the solid state, 2e features a monomeric structure with κ³ coordination of the monoanionic naphthoxy‐imine‐quinoline ligand onto the nickel center. Upon activation with MAO, both classes of nickel catalysts were able to produce selectively 1‐butene (81.5–92.1 wt%) with turnover frequencies (TOFs) varying from 3,100 to 24,300 mol(C₂H₄) mol (Ni)^?1 h^?1. Nickel precatalysts bearing phenoxy‐imine ligands were much more active than its naphthoxy analogous under the same conditions. The use of a mixture of cocatalysts (MAO/TMA or MAO/TiBA) resulted in poor activities; however the presence of TiBA in the milieu led to a significant improvement on selectivity for 1‐hexene (25.5 wt%). Under optimized conditions ([Ni] = 10 μmol, 30 °C, oligomerization time = 5 min, 20 bar ethylene, [Al]/[Ni] = 600), precatalyst 2c led to TOF = 59,900 mol(C₂H₄) mol(Ni)^?1 h^?1 and selectivity for 1‐butene of 89.5 wt%.     

Designed Synthesis of a 2D Porphyrin‐Based sp2 Carbon‐Conjugated Covalent Organic Framework for Heterogeneous Photocatalysis

The construction of stable covalent organic frameworks (COFs) for various applications is highly desirable. Herein, we report the synthesis of a novel two‐dimensional (2D) porphyrin‐based sp² carbon‐conjugated COF (Por‐sp²c‐COF), which adopts an eclipsed AA stacking structure with a Brunauer—Emmett—Teller surface area of 689 m² g^?1. Owing to the C=C linkages, Por‐sp²c‐COF shows a high chemical stability under various conditions, even under harsh conditions such as 9 m HCl and 9 m NaOH solutions. Interestingly, Por‐sp²c‐COF can be used as a metal‐free heterogeneous photocatalyst for the visible‐light‐induced aerobic oxidation of amines to imines. More importantly, in comparison to imine‐linked Por‐COF, the inherent structure of Por‐sp²c‐COF equips it with several advantages as a photocatalyst, including reusability and high photocatalytic performance. This clearly demonstrates that sp² carbon‐linked 2D COFs can provide an interesting platform for heterogeneous photocatalysis.     

Two-Dimensional LDH Film Templating for Controlled Preparation and Performance Enhancement of Polyamide Nanofiltration Membranes

Tailored design of high-performance nanofiltration membranes that can be used in a variety of applications such as water desalination, resource recovery, and sewage treatment is desirable. Herein, we describe the use of layered double hydroxides (LDH) intermediate layer to control the interfacial polymerization between trimesoyl chloride (TMC) and piperazine (PIP) for the preparation of polyamide (PA) membrane. The dense surface of LDH layer and its unique mass transfer behavior influence the diffusion of PIP, and the supporting role of the LDH layer allows the formation of ultrathin PA membranes. By only changing the concentration of PIP, a series of membranes with controllable thickness from 10 to 50 nm and tunable crosslinking-degree can be prepared. The membrane prepared with a higher concentration of PIP shows excellent performance for divalent salt retention with water permeance of 28 Lm⁻² h⁻¹ bar⁻¹, high rejection of 95.1 % for MgCl₂ and 97.1 % for Na₂SO₄. While the membrane obtained with a lower concentration of PIP can sieve dye molecules of different sizes with a flux of up to 70 Lm⁻² h⁻¹ bar⁻¹. This work demonstrates a novel strategy for the controllable preparation of high-performance nanofiltration membranes and provides new insights into how the intermediate layer affects the IP reaction and the final separation performance.     

Amino‐Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g‐C3N4 for Enhanced Photocatalytic CO2 Reduction

Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome. To circumvent these obstacles, we anchored CsPbBr₃ QDs (CPB) on NH_x‐rich porous g‐C₃N₄ nanosheets (PCN) to construct the composite photocatalysts via N?Br chemical bonding. The 20 CPB‐PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h^?1 g^?1 in acetonitrile/water for photocatalytic reduction of CO₂ to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr₃ QDs. This study opens up new possibilities of using halide perovskite QDs for photocatalytic application.     

Covalent organic frameworks with imine proton acceptors for efficient photocatalytic H2 production

Covalent organic frameworks (COFs) are promising crystalline materials for the light-driven hydrogen evolution reaction (HER) due to their tunable chemical structures and energy band gaps. However, deeply understanding corresponding mechanism is still challenging due to the multiple components and complicated electron transfer and reduction paths involved in photocatalytic HER. Here, the photocatalytic HER investigation has been reported based on three COFs catalysts, 1–3, which are prepared by benzo[1,2-b:3,4-b':5,6-b']trithiophene-2,5,8-trialdehyde to react with C₃ symmetric triamines including tris(4-aminophenyl)amine, 1,3,5-tris(4-aminophenyl)benzene, and (1,3,5-tris-(4-aminophenyl)triazine, respectively. As the isostructural hexagonal honeycomb-type COF of 2 and 3 reported previously, the crystal structure of 1 has been carefully correlated through the powder X-ray diffraction study with the help of theoretical simulations. 1 shows highly porous framework with Brunauer-Emmett-Teller surface area of 1249 m²/g. Moreover, the introduction of ascorbic acid into the photocatalytic system of COFs achieves the hydrogen evolution rate of 3.75, 12.16 and 20.2 mmol g^–1 h^–1 for 1–3, respectively. The important role of ascorbic acid in photocatalysis of HER is disclosed to protonate the imine linkages of these COFs, leading to the obvious absorbance red-shift and the improved charge separation efficiency together with reduced resistance in contrast to pristine materials according to the spectroscopic and electronic characterizations. These innovations of chemical and physical properties for these COFs are responsible for their excellent photocatalytic performance. These results elucidate that tiny modifications of COFs structures is able to greatly tune their band structures as well as catalytic properties, therefore providing an available approach for optimizing COFs functionalities.     

Removal of dithioterethiol (DTT) from water by membranes of cellulose acetate (AC) and AC doped ZnO and TiO2 nanoparticles

Dithioterethiol (DTT) is a typical example of substances that contain sulfur with adverse effects on human health. Membranes-based cellulose acetate is used for the separation processes of thiols after the addition of ZnO and TiO₂ nanoparticles. The measurement of permeability allows us to estimate the efficiency of membrane cleaning. The permeability increases from 8.82 L.h^?1.m^?2.bar^?1 for CA membrane to 20.77 L.h^?1.m^?2.bar^?1 for CA-TiO₂ and 21.96 L.h^?1.m^?2.bar^?1 for CA-ZnO membranes. For the permeability values of DTT, we noted that the CA-ZnO membrane has the highest permeability (50.66 L.h^?1.m^?2.bar^?1). The CA-ZnO membrane changes from nanofiltration to ultrafiltration membrane. On the other hand, for the CA-TiO₂ modified membrane, the permeability decreases to 6.00 L.h^?1.m^?2.bar^?1. The CA-TiO₂ membrane is in the category of reverse osmosis membranes. This variation is explained by the interaction between nanoparticles and DTT. The contact angles of the incorporated membranes decrease progressively with the addition of TiO₂ or ZnO-NPs. The low contact angle with water means high hydrophilicity, indicated that the addition of TiO₂ and ZnO improved the hydrophilicity of the membranes. The CA membrane had the highest contact angle with water of 92.64 ± 1.5°. After the addition of 0.1 g of TiO₂ or ZnO, the contact angle of CA-TiO₂ and CA-ZnO was reduced to 86.7 ± 0.2° and 70.51 ± 1.5°, respectively. Both TiO₂ and ZnO caused strong hydrophilicity of membranes. From the elimination rates of DTT, it is concluded that there are optimal conditions of (1) Pressure P = 2 bars, (2) pH = 10 and (3) DTT concentration = 2 mM.     

Intermediate Formation of Macrocycles for Efficient Crystallization of 2D Covalent Organic Frameworks with Enhanced Photocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) have gained significant attention as key photocatalysts for efficient solar light conversion into hydrogen production. Unfortunately, the harsh synthetic conditions and intricate growth process required to obtain highly crystalline COFs greatly hinder their practical application. Herein, we report a simple strategy for the efficient crystallization of 2D COFs based on the intermediate formation of hexagonal macrocycles. Mechanistic investigation suggests that the use of 2,4,6-triformyl resorcinol (TFR) as the asymmetrical aldehyde build block allows the equilibration between irreversible enol-to-keto tautomerization and dynamic imine bonds to produce the hexagonal β-ketoenamine-linked macrocycles, the formation of which could provide COFs with high crystallinity in half hour. We show that COF-935 with 3 wt % Pt as cocatalyst exhibit a high hydrogen evolution rate of 67.55 mmol g⁻¹ h⁻¹ for water splitting when exposed to visible light. More importantly, COF-935 exhibits an average hydrogen evolution rate of 19.80 mmol g⁻¹ h⁻¹ even at a low loading of only 0.1 wt % Pt, which is a significant breakthrough in this field. This strategy would provide valuable insights into the design of highly crystalline COFs as efficient organic semiconductor photocatalysts.     

Endowing g‐C3N4 Membranes with Superior Permeability and Stability by Using Acid Spacers

g‐C₃N₄ membranes were modulated by intercalating molecules with SO₃H and benzene moieties between layers. The intercalation molecules break up the tightly stacking structure of g‐C₃N₄ laminates successfully and accordingly the modified g‐C₃N₄ membranes give rise to two orders magnitude higher water permeances without sacrificing the separation efficiency. The sulfonated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SPPO)/g‐C₃N₄ with a thickness of 350 nm presents an exceptionally high water permeance of 8867 L h^?1 m^?2 bar^?1 and 100 % rejection towards methyl blue, while the original g‐C₃N₄ membrane with a thickness of 226 nm only exhibits a permeance of 60 L h^?1 m^?2 bar^?1. Simultaneously, SO₃H sites firmly anchor nitrogen with base functionality distributing onto g‐C₃N₄ through acid–base interactions. This enables the nanochannels of g‐C₃N₄ based membranes to be stabilized in acid, basic, and also high‐pressure environments for long periods.     

Strong‐Base‐Assisted Synthesis of a Crystalline Covalent Triazine Framework with High Hydrophilicity via Benzylamine Monomer for Photocatalytic Water Splitting

Methods to synthesize crystalline covalent triazine frameworks (CTFs) are limited and little attention has been paid to development of hydrophilic CTFs and photocatalytic overall water splitting. A route to synthesize crystalline and hydrophilic CTF‐HUST‐A1 with a benzylamine‐functionalized monomer is presented. The base reagent used plays an important role in the enhancement of crystallinity and hydrophilicity. CTF‐HUST‐A1 exhibits good crystallinity, excellent hydrophilicity, and excellent photocatalytic activity in sacrificial photocatalytic hydrogen evolution (hydrogen evolution rate up to 9200 μmol g^?1 h^?1). Photocatalytic overall water splitting is achieved by depositing dual co‐catalysts in CTF‐HUST‐A1, with H₂ evolution and O₂ evolution rates of 25.4 μmol g^?1 h^?1 and 12.9 μmol g^?1 h^?1 in pure water without using sacrificial agent.     

An Azine‐Linked Covalent Organic Framework: Synthesis,Characterization and Efficient Gas Storage

A azine‐linked covalent organic framework, COF‐JLU2, was designed and synthesized by condensation of hydrazine hydrate and 1,3,5‐triformylphloroglucinol under solvothermal conditions for the first time. The new covalent organic framework material combines permanent micropores, high crystallinity, good thermal and chemical stability, and abundant heteroatom activated sites in the skeleton. COF‐JLU2 possesses a moderate BET surface area of over 410 m² g^?1 with a pore volume of 0.56 cm³ g^?1. Specifically, COF‐JLU2 displays remarkable carbon dioxide uptake (up to 217 mg g^?1) and methane uptake (38 mg g^?1) at 273 K and 1 bar, as well as high CO₂/N₂ (77) selectivity. Furthermore, we further highlight that it exhibits a higher hydrogen storage capacity (16 mg g^?1) than those of reported COFs at 77 K and 1 bar.     

P (VDF‐co‐CTFE)‐g‐P2VP amphiphilic graft copolymers: Synthesis,structure, and permeation properties

A series of amphiphilic graft copolymers of poly (vinylidene fluoride‐co‐chlorotrifluoroethylene)‐g‐poly(2‐vinyl pyridine), P (VDF‐co‐CTFE)‐g‐P2VP, with different degrees of P2VP grafting (from 26.3 to 45.6 wt%) was synthesized via one‐pot atom transfer radical polymerization (ATRP). The amphiphilic properties of P (VDF‐co‐CTFE)‐g‐P2VP graft copolymers allowed itself to self‐assemble into nanoscale structures. P (VDF‐co‐CTFE)‐g‐P2VP graft copolymers were introduced into neat P (VDF‐co‐CTFE) as additives to form blending membranes. When two different solvents, N‐methyl‐2‐pyrrolidone (NMP) and dimethylformamide (DMF), were used, specific organized crystalline structures were observed only in the NMP systems. P (VDF‐co‐CTFE)‐g‐P2VP played a pivotal role in controlling the morphology and pore structure of membranes. The water flux of the membranes increased from 57.2 to 310.1 L m^?2 h^?1 bar^?1 with an increase in the PVDF‐co‐CTFE‐g‐P2VP loading (from 0 to 30 wt%) due to increased porosity and hydrophilicity. The flux recovery ratio (FRR) increased from 67.03% to 87.18%, and the irreversible fouling (R_ir) decreased from 32.97% to 12.82%. Moreover, the pure gas permeance of the membranes with respect to N₂ was as high as 6.2 × 10⁴ GPU (1 GPU = 10^–6 cm³[STP]/[s cm² cmHg]), indicating their possible use as a porous polymer support for gas separation applications.