Synthesis of Low‐Dimensional Polyion Complex Nanomaterials via Polymerization‐Induced Electrostatic Self‐Assembly

Nanostructured polyion complexes (PICs) are appealing in biomaterials applications. Yet, conventional assembly suffers from the weakness in scale‐up and reproducibility. Only a few low‐dimensional PICs are available to date. Herein we report an efficient and scalable strategy to prepare libraries of low‐dimensional PICs. It involves a visible‐light‐mediated RAFT polymerization of ionic monomer in the presence of a polyion of the opposite charge at 5–50 % w/w total solids concentration in water at 25 °C, namely, polymerization‐induced electrostatic self‐assembly (PIESA). A Vesicle, multi‐compartmental vesicle, and large‐area unilamellar nanofilm can be achieved in water. A long nanowire and porous nanofilm can be prepared in methanol/water. An unusual unimolecular polyion complex (uPIC)‐sphere‐branch/network‐film transition is reported. This green chemistry offers a general platform to prepare various low‐dimensional PICs with high reproducibility on a commercially viable scale under eco‐friendly conditions.     

Synthesis of High χ–Low N Diblock Copolymers by Polymerization‐Induced Self‐Assembly

Polymerization‐induced self‐assembly (PISA) enables the scalable synthesis of functional block copolymer nanoparticles with various morphologies. Herein we exploit this versatile technique to produce so‐called “high χ–low N” diblock copolymers that undergo nanoscale phase separation in the solid state to produce sub‐10 nm surface features. By varying the degree of polymerization of the stabilizer and core‐forming blocks, PISA provides rapid access to a wide range of diblock copolymers, and enables fundamental thermodynamic parameters to be determined. In addition, the pre‐organization of copolymer chains within sterically‐stabilized nanoparticles that occurs during PISA leads to enhanced phase separation relative to that achieved using solution‐cast molecularly‐dissolved copolymer chains.     

DNA–Polymer Nanostructures by RAFT Polymerization and Polymerization‐Induced Self‐Assembly

Nanostructures derived from amphiphilic DNA–polymer conjugates have emerged prominently due to their rich self‐assembly behavior; however, their synthesis is traditionally challenging. Here, we report a novel platform technology towards DNA–polymer nanostructures of various shapes by leveraging polymerization‐induced self‐assembly (PISA) for polymerization from single‐stranded DNA (ssDNA). A “grafting from” protocol for thermal RAFT polymerization from ssDNA under ambient conditions was developed and utilized for the synthesis of functional DNA–polymer conjugates and DNA–diblock conjugates derived from acrylates and acrylamides. Using this method, PISA was applied to manufacture isotropic and anisotropic DNA–polymer nanostructures by varying the chain length of the polymer block. The resulting nanostructures were further functionalized by hybridization with a dye‐labelled complementary ssDNA, thus establishing PISA as a powerful route towards intrinsically functional DNA–polymer nanostructures.     

The Effect of Hydrophile Topology in RAFT‐Mediated Polymerization‐Induced Self‐Assembly

Polymerization‐induced self‐assembly (PISA) was employed to compare the self‐assembly of different amphiphilic block copolymers. They were obtained by emulsion polymerization of styrene in water using hydrophilic poly(N‐acryloylmorpholine) (PNAM)‐based macromolecular RAFT agents with different structures. An average of three poly (ethylene glycol acrylate) (PEGA) units were introduced either at the beginning, statistically, or at the end of a PNAM backbone, resulting in formation of nanometric vesicles and spheres from the two former macroRAFT architectures, and large vesicles from the latter. Compared to the spheres obtained with a pure PNAM macroRAFT agent, composite macroRAFT architectures promoted a dramatic morphological change. The change was induced by the presence of PEGA hydrophilic side‐chains close to the hydrophobic polystyrene segment.     

Surface‐Assisted Self‐Assembly of a Hydrogel by Proton Diffusion

Controlling supramolecular growth at solid surfaces is of great importance to expand the scope of supramolecular materials. A dendritic benzene‐1,3,5‐tricarboxamide peptide conjugate is described in which assembly can be triggered by a pH jump. Stopped‐flow kinetics and mathematical modeling provide a quantitative understanding of the nucleation, elongation, and fragmentation behavior in solution. To assemble the molecule at a solid–liquid interface, we use proton diffusion from the bulk. The latter needs to be slower than the lag phase of nucleation to progressively grow a hydrogel outwards from the surface. Our method of surface‐assisted self‐assembly is generally applicable to other gelators, and can be used to create structured supramolecular materials.     

Surface‐Assisted Self‐Assembly Strategies Leading to Supramolecular Hydrogels

Localized molecular self‐assembly processes leading to the growth of nanostructures exclusively from the surface of a material is one of the great challenges in surface chemistry. In the last decade, several works have been reported on the ability of modified or unmodified surfaces to manage the self‐assembly of low‐molecular‐weight hydrogelators (LMWH) resulting in localized supramolecular hydrogel coatings mainly based on nanofiber architectures. This Minireview highlights all strategies that have emerged recently to initiate and localize LMWH supramolecular hydrogel formation, their related fundamental issues and applications.     

Hierarchical Self‐Assembly of Poly‐Pseudorotaxanes into Artificial Microtubules

Hierarchical self‐assembly of building blocks over multiple length scales is ubiquitous in living organisms. Microtubules are one of the principal cellular components formed by hierarchical self‐assembly of nanometer‐sized tubulin heterodimers into protofilaments, which then associate to form micron‐length‐scale, multi‐stranded tubes. This peculiar biological process is now mimicked with a fully synthetic molecule, which forms a 1:1 host‐guest complex with cucurbit[7]uril as a globular building block, and then polymerizes into linear poly‐pseudorotaxanes that associate laterally with each other in a self‐shape‐complementary manner to form a tubular structure with a length over tens of micrometers. Molecular dynamic simulations suggest that the tubular assembly consists of eight poly‐pseudorotaxanes that wind together to form a 4.5 nm wide multi‐stranded tubule.     

Aqueous Ring‐Opening Polymerization‐Induced Self‐Assembly (ROPISA) of N‐Carboxyanhydrides

Reported here is the first aqueous ring‐opening polymerization (ROP) of N‐carboxyanhydrides (NCAs) using α‐amino‐poly(ethylene oxide) as a macroinitiator to protect the NCA monomers from hydrolysis through spontaneous in situ self‐assembly (ISA). This ROPISA process affords well‐defined amphiphilic diblock copolymers that simultaneously form original needle‐like nanoparticles.     

Organoboron‐Functionalization Enables the Hierarchical Assembly of Giant Polyoxometalate Nanocapsules

The aggregation of molecular metal oxides into larger superstructures can bridge the gap between molecular compounds and solid‐state materials. Here, we report that functionalization of polyoxotungstates with organo‐boron substituents leads to giant polyoxometalate‐based nanocapsules with dimensions of up to 4 nm. A “lock and key” mechanism enables the site‐specific anchoring of aromatic organo‐boronic acids to metal‐functionalized Dawson anions [M₃P₂W₁₅O₆₂]^9? (M=Ta^V or Nb^V), resulting in unique nanocapsules containing up to twelve POM units. Experimental and theoretical studies provide initial insights into the role of the organo‐boron moieties and the metal‐functionalized POMs for the assembly of the giant aggregates. The study therefore lays the foundations for the design of organo‐POM‐based functional nanostructures.     

Ethylene Polymerization‐Induced Self‐Assembly (PISA) of Poly(ethylene oxide)‐block‐polyethylene Copolymers via RAFT

Poly(ethylene oxide) (PEO) with dithiocarbamate chain ends (PEO–SC(=S)?N(CH₃)Ph and PEO–SC(=S)?NPh₂, named PEO‐1 and PEO‐2 , respectively) were used as macromolecular chain‐transfer agents (macro‐CTAs) to mediate the reversible addition–fragmentation chain transfer (RAFT) polymerization of ethylene in dimethyl carbonate (DMC) under relatively mild conditions (80 °C, 80 bar). While only a slow consumption of PEO‐1 was observed, the rapid consumption of PEO‐2 led to a clean chain extension and the formation of a polyethylene (PE) segment. Upon polymerization, the resulting block copolymers PEO‐b‐PE self‐assembled into nanometric objects according to a polymerization‐induced self‐assembly (PISA).     

Self‐Assembly of Diblock Copolymers into Novel Snowflake‐Shaped Aggregates Driven by Quadruple Hydrogen Bonding

Two well‐defined diblock copolymers with quadruple hydrogen‐bonding groups on one block, denoted PSUEA‐1 and PSUEA‐2 , have been synthesized, and novel snowflake‐shaped nanometer‐scale aggregates, self‐assembled by such diblock copolymers in non‐polar solvents, have been observed. The micellar dimensions were investigated by DLLS and SLLS. Their morphologies were studied by TEM. Since the degrees of polymerization of the Upy‐containing blocks of PSUEA‐1 and PSUEA‐2 are quite similar and the polystyrene block of the PSUEA‐1 is longer than that of the PSUEA‐2 , a subtle but identifiable difference between the sizes and structures of the PSUEA‐1 and PSUEA‐2 aggregates was noticed and characterized.

     

End‐Group‐Functionalized Poly(α‐olefinates) as Non‐Polar Building Blocks: Self‐Assembly of Sugar–Polyolefin Hybrid Conjugates

Living coordinative chain‐transfer polymerization of α‐olefins, followed by chemical functionalization of a Zn(polymeryl)₂ intermediate, provides entry to end‐group functionalized poly(α‐olefinates) (x‐PAOs) that can serve as a new class of non‐polar building block with tailorable occupied volumes. Application of these x‐PAOs for the synthesis and self‐assembly of sugar‐polyolefin hybrid conjugates demonstrate the ability to manipulate the morphology of the ultra‐thin film nanostructure through variation in occupied volume of the x‐PAO domain.     

Reversible Morphological Evolution of Responsive Giant Vesicles to Nanospheres by the Self‐Assembly of Crystalline‐b‐Coil Polyphosphazene Block Copolymers

The preparation of long‐term‐stable giant unilamellar vesicles (GUVs, diameter ≥1000 nm) and large vesicles (diameter ≥500 nm) by self‐assembly in THF of the crystalline‐b‐coil polyphosphazene block copolymers [N=P(OCH₂CF₃)₂]_n‐b‐[N=PMePh]_m ( 4 a : n=30, m=20; 4 b : n=90, m=20; 4 c : n=200, m=85), which combine crystalline [N=P(OCH₂CF₃)₂] and amorphous [N=PMePh] blocks, both of which are flexible, is reported. SEM, TEM, and wide‐angle X‐ray scattering experiments demonstrated that the stability of these GUVs is induced by crystallization of the [N=P(OCH₂CF₃)₂] blocks at the capsule wall of the GUVS, with the [N=PMePh] blocks at the corona. Higher degrees of crystallinity of the capsule wall are found in the bigger vesicles, which suggests that the crystallinity of the [N=P(OCH₂CF₃)₂] block facilitates the formation of large vesicles. The GUVs are responsive to strong acids (HOTf) and, after selective protonation of the [N=PMePh] block, they undergo a morphological evolution to smaller spherical micelles in which the core and corona roles have been inverted. This morphological evolution is totally reversible by neutralization with a base (NEt₃), which regenerates the original GUVs. The monitoring of this process by dynamic light scattering allowed a mechanism to to be proposed for this reversible morphological evolution in which the block copolymer 4 a and its protonated form 4 a⁺ are intermediates. This opens a route to the design of reversibly responsive polymeric systems in organic solvents. This is the first reversibly responsive vesicle system to operate in organic media.     

Hierarchical Self‐Assembly of PDMA‐b‐PS Chains into Granular Nanoparticles: Genesis and Fate

The hierarchical self‐assembly of an amphiphilic block copolymer, poly(N,N‐dimethylacrylamide)‐block‐polystyrene with a very short hydrophilic block (PDMA₁₀‐b‐PS₆₂), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.

     

Tunable Self‐Assembly of Triazole‐Linked Porphyrin–Polymer Conjugates

The convergence of supramolecular chemistry and polymer science offers many powerful approaches for building functional nanostructures with well‐defined dynamic behaviour. Herein we report the efficient “click” synthesis and self‐assembly of AB₂‐ and AB₄‐type multitopic porphyrin–polymer conjugates (PPCs). PPCs were prepared using the copper(I)‐catalysed azide–alkyne cycloaddition (CuAAC) reaction, and consisted of linear polystyrene, poly(butyl acrylate), or poly(tert‐butyl acrylate) arms attached to a zinc(II) porphyrin core via triazole linkages. We exploit the presence of the triazole groups obtained from CuAAC coupling to direct the self‐assembly of the PPCs into short oligomers (2–6 units in length) via intermolecular porphyrinatozinc–triazole coordination. By altering the length and grafting density of the polymer arms, we demonstrate that the association constant of the porphyrinatozinc–triazole complex can be systematically tuned over two orders of magnitude. Self‐assembly of the PPCs also resulted in a 6 K increase in the glass transition temperature of the bulk material compared to a non‐assembling PPC. The modular synthesis and tunable self‐assembly of the triazole‐linked PPCs thus represents a powerful supramolecular platform for building functional nanostructured materials.     

Cooperative,Reversible Self‐Assembly of Covalently Pre‐Linked Proteins into Giant Fibrous Structures

We demonstrate a simple bioconjugate polymer system that undergoes reversible self‐assembling into extended fibrous structures, reminiscent of those observed in living systems. It is comprised of green fluorescent protein (GFP) molecules linked into linear oligomeric strands through click step growth polymerization with dialkyne poly(ethylene oxide) (PEO). Confocal microscopy, atomic force microscopy, and dynamic light scattering revealed that such strands form high persistence length fibers, with lengths reaching tens of micrometers, and uniform, sub‐100 nm widths. We ascribe this remarkable and robust form of self‐assembly to the cooperativity arising from the known tendency of GFP molecules to dimerize through localized hydrophobic patches and from their covalent pre‐linking with flexible PEO. Dissipative particle dynamics simulations of a coarse‐grained model of the system revealed its tendency to form elongated fibrous aggregates, suggesting the general nature of this mode of self‐assembly.     

Coordination‐Driven Self‐Assembly of a Molecular Knot Comprising Sixteen Crossings

Molecular knots have become highly attractive to chemists because of their prospective properties in mimicking biomolecules and machines. Only a few examples of molecular knots from the billions tabulated by mathematicians have been realized and molecular knots with more than eight crossings have not been reported to date. We report here the coordination‐driven [8+8] self‐assembly of a higher‐generation molecular knot comprising as many as sixteen crossings. Its solid‐state X‐ray crystal structure and multinuclear 2D NMR findings confirmed its architecture and topology. The formation of this molecular knot appears to depend on the functionalities and geometries of donor and acceptor in terms of generating appropriate angles and strong π‐π interactions supported by hydrophobic effects. This study shows coordination‐driven self‐assembly offers a powerful potential means of synthesizing more and more complicated molecular knots and of understanding differences between the properties of knotted and unknotted structures.